Pooled table M_VMVME

Hi,
A pooled table 'M_VMVME' doesnot exist in ECC 6.0 version.
Can anyone suggest, what can be used as it's replacement?
Thanks,
Sheetal.

HI sheetal,
I am quite sure that SAP standard tables wont be deleted , when the version is upgraded.
May be the name might be changed.
I too try to find it out.
I don' t think that the table will be missing, it may be there with other name.
be in touch,
i might help you,if i can, b'cos we use 4.7 version.
bye now,

Similar Messages

Replacement for Pooled table: M_VMVME

Hi,
Can anyone suggest what is the replacement for the pooled table M_VMVME in ECC 6.0 version.
Thanks,
Sheetal

Sheetal
The replacement for this pooled table is SHP_IDX_GDRC.
Please check out Note: 570991 & 479457 or look at program ZBEY_COMPLETE_INBOUND_DELIVERY.
You may need to replace your cersion of the program with the new one.
Regards
Carl Cavendish-Davies
SAP Technical Manager

How to get the data from Pooled Table T157E.

Hi Experts,
How to get the data from Pooled Table T157E.
Any help.
Thanks in Advance,
Ur's Harsha.

create some internal table similar to T157E and pass all data as per SPRAS.
After that use internal table in your program as per the requirement.
Regds,
Anil

Select query taking too much time to fetch data from pool table a005

Dear all,
I am using 2 pool table a005 and a006 in my program. I am using select query to fetch data from these table. i.e. example is mentioned below.
select * from a005 into table t_a005 for all entries in it_itab
                   where vkorg in s_vkorg
                   and     matnr in s_matnr
                   and     aplp   in s_aplp
                   and     kmunh = it_itab-kmunh.
here i can't create index also as tables are pool table...If there is any solutions , than please help me for same..
Thanks ,

it would be helpful to know what other fields are in the internal table you are using for the FOR ALL ENTRIES.
In general, you should code the order of your fields in the select in the same order as they appear in the database. If you do not have the top key field, then the entire database is read. If it's large then it's going to take a lot of time. The more key fields from the beginning of the structure that you can supply at faster the retrieval.
Regards,
Brent

Use of "Pool Table(s)" in Module Pool Program

Hi,
I often see/hear that Pool tables play an important role in Module Pool Programs.
anybody please explain me how Pool tables are used in Module Pools?? => Did you look for any documentation?
if possible with code snippets. =>NO.
Thanks,
Kranthi.
Edited by: kishan P on Nov 14, 2010 7:23 PM

Hi,
I often see/hear that Pool tables play an important role in Module Pool Programs.
anybody please explain me how Pool tables are used in Module Pools?? => Did you look for any documentation?
if possible with code snippets. =>NO.
Thanks,
Kranthi.
Edited by: kishan P on Nov 14, 2010 7:23 PM

How can I get data in flat file from Pool table and cluster table ?

Hi,
I am working in one Achiving project. My requirement is to get data into flat file from Cluster table and pool table.
Is there any tool avilable to download data into flat file from pool table and cluster table ?
if table name given in the selection screen then data will be downloaded into flat file.
waiting for quick response.
Best Regards,
Bansidhar

Data cannot be retrived directly form the cluster table
as the Cluster results are stored in Cluster Key say for example PCLkey
and form that Key we need to fetch the data
these clustes are not the part of PNP or PNPCE tables
for ur info kindly check

View, Clustur & Pooled Table

Hi,
I have few questions on the above topics.
How can we retreive data from View , Clustur & Pooled Table using Select statements.
If possible can you explain me with an example.
what kind of data can we retreive from them . for example BSEC - how can we use it .
Thank you in advance.
Ry

hi,
You can access them using SELECT statements, you CAN NOT use joins though.
For example, BSEG is a cluster table.
report znave_0003 .
data: ibseg type table of bseg with header line.
parameters: p_bukrs type bseg-bukrs.
select * into table ibseg from bseg
up to 100 rows
where bukrs = p_bukrs.
loop at ibseg.
write:/ ibseg-bukrs, ibseg-belnr.
endloop.
to retrieve the data from a view....
Declare the internal table with the type of View.
Data : itab type table of zview001.
or write select query as
select * from zview001 into corresponding fields of itab.
Also you can uncheck the Unicode checks active (checkbox) in the program attributes.
{When you check that unicode checkbox, you should use an internal table without a header line. Instead you should declare a work area)
Hope it helps...
~~Guduri

How to extract data from a pool table?

Hello,
I want to create an generic extractor for table T030, but this is a pool/cluster table and it is not possible to create a view for such a table.
Do somebody know how to solve this problem? Does there exist function modules to read the data from a pool data?
Thanks
Theodor

Function Module would be your best bet..considering thats the best way as far as performance is taken into consideration.
But there is a work around too...
If the other table u use in the join is not a clusture table then u can create a view on that table and u can add append structure to this with fields from the clusture table and use an exit to populate it.
Try it Will Work...used this technique when I used KONV.* This Procedure does not decrease performance considerably.
at least in my case as thre were only a few fields i needed from pool table
Hope this Helps
Anand Raj

How can i decleare select-options in module pool table control?

Hi everybody!!
Can anyone tell me how can I decleare select-options in module pool table control screen?. I have declared it in a screen with a table control but a dump is triggered due to an error when generating the selection screen.
Regards...

My suggestion will be try to use fm
call function 'FREE_SELECTIONS_DIALOG'
Please search this forum you can find lot of threads related to this.
a®

Is it possible to use a pooled table when creating a view?

Hi,
I am trying to create a view based on table A005 but this table is a Pooled table and the system wont allow me to create a view on it.
Is there any way to do this?
Thanks,

Hi,
Join stmt can not be executed on Cluster tables & pooled tables.
regards,
ajit.

Pool Table Creation in ABAP Dictionary

Please Help
How to create Pool table in ABAP DDIC ? I Tried with the Existing Transparent Table
Changing Its Category to Pool Table by going through EXTRA menu and then Change Table Category Option but After this
it is asking for Table Pool name in Delivery and Maintaince Tab what should be the name of table pool ?
How to assign pool table in Table Pool?

hi,
u will have to create your own ztable pool/cluster anad assign your table to that .
eg.
refer to table A005 its a pool table ...

Event Pooling Table doesn't work

I have created Event Pooling Table and registered it. When I insert correct name into field TABLENAME nothing happens - when I look at BI Administrator - Manage - Cache - the table still has entry in cache (and record is deleted from EPT table). When I insert incorrect name info field TABLENAME, I can see message in errorlog (The physical table misstat1_db::MIP:MV_E_HIMA in a cache polled row does not exist.) and I suppose that it is working. But cache not purged.
Can you someone tell me why?
Thx.

Hi,
Stale cache entries are purged automatically at the specified polling intervals. As your saying record has deleted, it means that polling has occured.
Are you sure that the cache entry you are looking at is the same table which has been modified?
If possible, not a solution just for debugging, try to create sample request in Answers and check whether it's been changing when the table get modified.
-Vency

Dynamic text in module pool table control

Hi ,
Can we have dynamic header text in module pool table control. Like dynamic header text in ALV report.
Thanks,
Prem.

Hi,
Populate an internal table with the header text that you want.
Replace the headers with I/O fields.
Populate the Headers in the PBO.

Alternative for Pooled table M_VMVAC in ECC 5 version

Hi,
Pooled table M_VMVAC in version 3.1i does not exist
in ECC 5.Can anyone tell me the alternative for this?
Pool/cluster is M_VMVA in 3.1i version
Helpful answers will be rewarded
Thanks
Kiran

Check data base view V_VMVAC.
Regards
Sridhar

Alternative for Pooled table M_VMVLA in ECC 5 version

Hi,
Pooled table M_VMVLA in version 3.1i does not exist
in ECC 5.Can anyone tell me the alternative for this?
Pool/cluster M_VMVL in 3.1i version
Helpful answers will be rewarded
Thanks
Kiran

Hai Kiran
Check the following Code in program 'RVV50L21'.
the following Code is present in ECC 5.0
select * from shp_idx_gdsi where wadat in i_datum "470
 and vstel in i_vstel
 and route in i_route
 and vbeln eq vttp-vbeln.
simillar code in 3.1 version is
select * from m_vmvla where wadat in i_datum
 and vstel in i_vstel
 and route in i_route
 and vbeln eq vttp-vbeln.
Replacent table for m_vmvla is shp_idx_gdsi
Regards
Sreeni

Pooled table M_VMVME

Similar Messages

Maybe you are looking for