Poor B&W print quality from Photoshop CS4

First a definition:
- Half-tone: this is a gray scale printing process that is required for an printer that can print only Black & White. It allows a B&W printer to be able to appear to have the ability to print grayscale. The higher the printer resolution, the less noticeable the half-tone dots or dithering will be.
The problem with Photoshop CS4 seems to be that, when you use it's print option, it's half-tone is very coarse and does not reflect the resolution capability of the destination printer, in my case, a LaserJet4. If I take the same print and print it from Bridge CS4, the half-tone is correct for the resolution of the printer and the print looks great. Also, from Photoshop CS4, if you do a save-as a .pdf and then print the .pdf, the print looks great, as well.
Keep in mind that the printer driver settings (which there are few) have not been changed during this testing.
My conclusion is that the problem is with Photoshop CS4 print option and I cannot find anyway in Photoshop to change the half-tone settings there. Further, if I use the exact same print with the exact same printer settings, it will print correctly from other graphics programs.
Any help with this would be greatly appreciated. In my lab, most of the printing is B&W for court exhibits and such.
Thanks, Jonathan
Image And Sound Forensics

Zeno,
Ok. But the printer works correctly if I do a save-as .pdf and print the
pdf. Or do the same from Bridge. So, how can it be the printer or printer
driver when it works correctly elsewhere in Photoshop and Bridge?
Jonathan

Similar Messages

Problems printing PSD from Photoshop CS4

My questions are: Does the PSD file have the printer information encoded?
Also why has this just started to show up? My wife has work successfully under the same conditions, files moved and printed on different printers, with no problems in the past.
I (we) have been struggling with a recent problem trying to print PSD files from Photoshop CS4. (Vista 32 bit, Epson 3880 networked) When trying to print certain, but not all, PSD files I get the message: "Before you can perform printer-related tasks such as page setup or printing a document, you need to install a printer." I have been in contact with Adobe support about the issue but with little in the way of positive results. I was referred to a kb link: http://kb2.adobe.com/cps/409/kb409119.html Tried all that to no avail. (The first suggestion is absurd to the point of making me wonder what process is used to construct the kbs. You cannot open the print menu when you get this message so....?)
Other solutions are not acceptable for the work my wife is doing, editing high quality photographs for an exhibition with test prints and so on. We are under intense time pressue with four shows coming up in a very short time. The final solution offered is that CS5 has solved all of this. Hum? interesting. No comment except new program, new problems so not a real solution for us.
In searching the web about this problem I have come across many other people with the same problem working from different platforms and even different Adobe products. I noticed that the MAC OS seemed to cause the same problem and that there was a problem with Reader and Acrobat. In every case the problem is never solved by Adobe or anyone else and users find some "workaround". I too have found what we hope is a workaround in our contiued travels on the blogosphere, on flickr http://www.flickr.com/groups/wellington/discuss/72157621548183001/ as "...a nasty, nasty solution" but we skipped the flatten part and the GIMP part and resave the PSD under a different name.
Adobe does seem supportive but not that interested (CS4 right) but I would like to find a real solution and I think many people would benefit from it.
Anyway what I have found is that the PSD files that will not print have been printed on another printer at some time in the past. In my case the Printer was an Epson Artisan A50. The printer we are using now is the Epson Stylus Pro 3880. Even when trying to print wirelessly to the 3880 from the laptop (Was Vista, now Windows 7) that was used to edit and print with the A50, (USB connection) we saw the same error. So it seems that the printer information is somehow embedded in the PSD file (also mentioned in a Blog) and is keeping PS from seeing the printer because the same printer is not there.
Has anybody already found the fix?
I know this is a long post but I have been working on this problem and have heard all of the pat and frankly useless answers and workarounds. Can we find a solution and fix the problem?

Tech support put me on hold for about 30 minutes to 'look up my serial number'. When he came back he started saying he did find my serial nu..... and he hung up. I had already given him my callback number. Yet he never called me back when we were 'disconnected'. There is no excuse for him not calling me back. I have no reason to believe this was anything other than intentional avoidance of the problem. Before he started looking up my serial number, he told me that Photoshop didn't support working with files on a network drive (???). He also told me that even if it was found to be an actual defect in the product, I still owed the $39. The $39 was "not for finding the defect... it was for the technician's time.... (???) Where do they find these people to answer the phones?
Sorry about the venting... I'm just losing money by the day, and I get to pay for these kinds of moronic statements.
Here's the situation, yet one more time.....
1) I complete a PSD file and save it
2) I print it on one of the printers accessible by that machine
3) I then try to close the PSD, but it says the 'file has changed' The ONLY thing that has changed is that I PRINTED it. So you can't tell me PS is not saving at least something about the printing task in the file
4) If I say 'no' to the save-after-print question, I can go to another computer, open the same file and print with no problem
5) If I say 'yes' to the save-after-print question, and I go to another computer and try to print the file, I get the "In order to perform printing tasks you must define a printer" message
6) This scenario applies to any machine. Once I hit 'save' after printing, that PSD can now never be printed on any other machine other than that one.
7) And this is a user problem (???)
Somebody please tell me:
1) why PS marks a file 'changed' and requires saving after doing nothing other than printing it if it is not saving printer history/setup in the file?
2) Why I can print the PSD from any computer with PS installed as long as I don't do a save after printing from one, but as soon as I do a save after print, the file is basically locked permanently to that one machine forever?
Right... and they want a minimum of $39 to tell me a) this is a user problem, b) Photoshop doesn't support files on a shared network drive; c) "...NO.... we don't save printer information in the file, and d) get hung up on with no callback.
I have 40 years of experience in software architecture and development. I know enough to know a little bit about how these things work. And I also have been around long enough to recognize intentional denial of a product defect by the support team.

Terrible print quality in Photoshop CS4 -- everything prints halftoned

Ever since installing Photoshop CS4, anything printed from within Photoshop comes out on paper looking halftoned (even though it looks normal onscreen). No other program (including previous version of Photoshop) has this problem.
Below I have included scans of an image printed from Photoshop CS4 and also from Illustrator CS4.
As an example, I drew something fast at 300 dpi in Autodesk Sketchbook, pasted that it into Photoshop, printed from within Photoshop, and it came out on paper looking halftoned. I then saved the .PSD from within Photoshop, placed that into Illustrator CS4 and printed the same image from within Illustrator. It printed on paper exactly as it looked onscreen (i.e., normally). I then scanned both results and placed them side-by-side to show what I'm getting from the printer.
http://www.hotcrayon.com/adobe/002/photoshop-cs4-printing-halftones.jpg
Lest anyone think it has something to do with the images themselves, I don't believe this can be the problem since everything printed from within Photoshop comes out this way. It prints vector artwork this way, high-res images too.. everything prints halftoned.
However, when I take the same images and print them from any other graphics program, they print normally.
Any help would be much appreciated!

I'm having the same half-tone print problem. However, when I print from Bridge I get a high quality print with no half-tones. Any Ideas? Thanks, Jonathan.

Print quality from Photoshop compared to Lightroom

Does Photoshop always convert the adjusted RAW image to a jpeg for printing, while Lightroom always prints as a Raw file after making adjustments?

Video demo Automaticly Populate a 911 Photo Collage Template
Photo Collage Toolkit UPDATED Made Rotate for Best Fit an option in PasteImageRoll.jsx Edit to customize your default settings.
Photoshop scripting is powerful and I believe this package demonstrates this.
The package includes four simple rules to follow when making Photo Collage Template PSD files so they will be compatible with my Photoshop scripts.
The Four Rules
Size the photo collage templates for the print size you want - width, height and print DPI resolution.
Photo collage templates must have a Photoshop background layer. The contents of this layer can be anything.
Photo collage templates must have alpha channels named "Image 1", "Image 2", ... "Image n".
Photo collage templates layers above the background layers must provide transparent areas to let the images that will be placed below them show through.
There are twelve scripts in this package they provide the following functions:
TestCollageTemplate.jsx - Used to test a Photo Collage Template while you are making it with Photoshop.
CollageTemplateBuilder.jsx - Can build Templates compatible with this toolkit's scripts.
LayerToAlphaChan.jsx - Used to convert a Prototype Image Layer stack into a template document.
InteractivePopulateCollage.jsx - Used to interactively populate Any Photo Collage template. Offers most user control inserting pictures and text.
ReplaceCollageImage.jsx - use to replace a populated collage image Smart Object layer with an other image correctly resized and positioned.
ChangeTextSize.jsx - This script can be used to change Image stamps text size when the size used by the populating did not work well.
PopulateCollageTemplate.jsx - Used to Automatically populate a Photo Collage template and leave the populated copy open in Photoshop.
BatchOneImageCollage.jsx - Used to Automatically Batch Populate Collage templates that only have one image inserted. The Collage or Image may be stamped with text.
BatchMultiImageCollage.jsx - Used to Automatically Batch Populate Any Photo Collage template with images in a source image folder. Easier to use than the interactive script. Saved collages can be tweaked.
BatchPicturePackage.jsx - Used to Automatically Batch Populate Any Photo Collage template with an image in a source image folder
PasteImageRoll.jsx - Paste Images into a document to be print on roll paper.
PCTpreferences.jsx - Edit This File to Customize Collage Populating scripts default setting and add your own Layer styles.
Documentation and Examples
Optional templates 8.5x11 - 16MB
Optional templates 8x10 - 51KB
Optional templates 11x14 - 23MB
Optional templates 12x12 - 12MB
Optional templates 13x19 - 37MB
Optional templates 16x16 - 4MB
Optional templates 16x20 - 91MB
Optional templates 20x24 - 125KB
Optional templates Multi-Image - 113MB
Optional templates One-Image - 106MB
Optional templates PhotoBoard-11x14 - 231KB

PSD files will not print from Photoshop CS4 (previously posted in Acrobat printing and prepress)

My questions are: Does the PSD file have the printer information encoded?
Also why has this just started to show up? My wife has work successfully under the same conditions, files moved and printed on different printers, with no problems in the past.
I (we) have been struggling with a recent problem trying to print PSD files from Photoshop CS4. (Vista 32 bit, Epson 3880 networked) When trying to print certain, but not all, PSD files I get the message: "Before you can perform printer-related tasks such as page setup or printing a document, you need to install a printer." I have been in contact with Adobe support about the issue but with little in the way of positive results. I was referred to a kb link: http://kb2.adobe.com/cps/409/kb409119.html Tried all that to no avail. (The first suggestion is absurd to the point of making me wonder what process is used to construct the kbs. You cannot open the print menu when you get this message so....?)
Other solutions are not acceptable for the work my wife is doing, editing high quality photographs for an exhibition with test prints and so on. We are under intense time pressue with four shows coming up in a very short time. The final solution offered is that CS5 has solved all of this. Hum? interesting. No comment except new program, new problems so not a real solution for us.
In searching the web about this problem I have come across many other people with the same problem working from different platforms and even different Adobe products. I noticed that the MAC OS seemed to cause the same problem and that there was a problem with Reader and Acrobat. In every case the problem is never solved by Adobe or anyone else and users find some "workaround". I too have found what we hope is a workaround in our contiued travels on the blogosphere, on flickr http://www.flickr.com/groups/wellington/discuss/72157621548183001/ as "...a nasty, nasty solution" but we skipped the flatten part and the GIMP part and resave the PSD under a different name.
Adobe does seem supportive but not that interested (CS4 right) but I would like to find a real solution and I think many people would benefit from it.
Anyway what I have found is that the PSD files that will not print have been printed on another printer at some time in the past. In my case the Printer was an Epson Artisan A50. The printer we are using now is the Epson Stylus Pro 3880. Even when trying to print wirelessly to the 3880 from the laptop (Was Vista, now Windows 7) that was used to edit and print with the A50, (USB connection) we saw the same error. So it seems that the printer information is somehow embedded in the PSD file (also mentioned in a Blog) and is keeping PS from seeing the printer because the same printer is not there.
Has anybody already found the fix?
I know this is a long post but I have been working on this problem and have heard all of the pat and frankly useless answers and workarounds. Can we find a solution and fix the problem?

Just a few examples, since you ask:
Dr Craig wrote:
…The first suggestion is absurd to the point of making me wonder what process is used to construct the kbs…
…Other solutions are not acceptable…
…The final solution offered is that CS5 has solved all of this. Hum? interesting. No comment except new program, new problems so not a real solution for us…
…In every case the problem is never solved by Adobe or anyone else and users find some "workaround"…
"...a nasty, nasty solution"…
…Adobe does seem supportive but not that interested (CS4 right)… b
…I have been working on this problem and have heard all of the pat and frankly useless answers and workarounds…
That attitude, Dr. Craig. Plus the verbosity you unconscionably inflicted on your fellow forum users.
Cheers.
Wo Tai Lao Le
我太老了       (Not posting as a scientist here
                           but as a Photoshop user
                           so I'll forego listing any unrelated academic titles.)

Printing from Photoshop CS4

I have Photshop CS4. I create a picture with a specific size in Photoshop (eample: 8.5" x 11"). I send it to the printer. In the printer box it also shows the correct print size. However when it prints it is only a small sample of the picture. An 8.5' x 11" picture from Photoshop, showing that size in the Image box and in the Photoshop print box, when sent to the printer shows at the correct size and prints it at 2-3/4" x 3-1/2". If i save the picture from Photoshop onto my desktop, then open it in Microsogt Office Picture Manager, then send it to the exact same printer, it is printed out at the correct size. I don't know why it will not print it to the correct size from Photoshop.

Printer is an HP Photosmart Premium. I believe I have the latest drivers. It
has to be something in Photoshop. When I print the same picture from any
other program it prints properly with this same printer. I just can't print
anything from Photoshop to its correct size.
Thank you for your email. Let me know if you can think of anything.
Sue DiGennaro
Ca. Portable Dance Floor Company
KEEPING YOU DANCING SINCE 1956
with the quality, reliability and durability of the products you have
trusted for over 50 years!
www.cpdfc.com

Print Too Small from Photoshop CS4 with HP 8500 All In One Printer

I'm running Windows XP with CS4 and latest patches and drivers. When I print an image to my HP 8500 All in one printer, the printout is too small. Instead of a centered 4 x 6 image on the page I get a 1 x 1-1/4 inch small print of the image in the upper left hand corner.
I re-installed CS3 and it works perfectly as do any other print options, such as word, etc. But from Photoshop CS4 I can find no way to print to this printer without the image shrinking in size. If I print to another printer at the same sitting, the image is fine. So it's a PS CS4 vs. HP 8500 unique problem I guess.
I've see this post in other forms and no help as yet. Does anyone have this one on their radar. I really like this printer, but it's quite annoying.
By the way, If I print to a PDF from PS CS4, the pdf file image is fine. That's another end around for printing also. HMMMM.
I did contact HP and they put the problem squarely back on Adobe. No partnership there.
Thanks,
Glen

Will the printer print from any app?
I know it sounds like a dumb question, but you didn't actually say... And I admit to looking for software problems on an occasion or two when I had forgotten to plug in cables.
-Noel

The photo print quality from my Mac to my Epson Artisan 810 is poor. When I take the same photo files (JPEGs) to my PC to print to the same printer without even uploading them to the PC, they print brighter and crisper from my PC.

The photo print quality from my Mac to my Epson Artisan 810 is poor. I just purchased my iMac for my photography business in Jan. (this is my first Mac). When I first tried printing, I noticed the quality wasn't as good as I expected it to be. Then, I had to print 4-3.5x5s on a sheet, so I e-mailed the image to myself and opened it on my PC to print it (much easier to print that way on PC in Windows Photo Gallery - I think it's impossible to print that way in iPhoto). That's when I first noticed that when I take the same photo files (JPEGs) to my PC to print to the same printer without even uploading them to the PC, they print brighter and crisper from my PC.
I've already been on the phone and e-mail w/Applecare many times over this issue. We've tried creating a test user and printing from there, and we've tried reinstalling the OS. I've tried printing from iPhoto, ImageCapture, and Preview apps/utilities, all w/the same result - no comparison to the PC-printed versions (no enhancements have been performed on the PC).
I'm out of ideas, and so is Applecare. They say it's most likely a driver issue b/c the printer is outdated, and that the only solution is to buy a new printer. BUT it is a pain for me to purchase a new printer - it takes days of research due to the nature of my business and the fact that I need a printer that can print directly onto a disc. I love this printer and don't want to have to buy a new one if I don't have to.

englishfreak2004 wrote:
Yes. I've checked for updates, and the driver I installed is the same as the one on Epson's website. I also spoke with Epson Customer Service, which was a dead end. Apple says the problem is due to an Epson driver issue (blaming Epson), but Epson says that with the older printers, it's actually Apple who creates the driver, so the problem is actually with Apple. Typical he-said, she-said...
Maybe not. Probably worth checking here:
Epson drivers for Mavericks:
http://www.epson.com/cgi-bin/Store/support/SupportMavericks.jsp

Colours do not Print correctly with Photoshop CS4

I am using the Adobe Master Collection CS4, and use an Epson RX650 printer, but for the life of me I cannot get Photoshop to print what is on the screen.
The prints are dark, and no where near the ones on the screen.
I am using genuine Epson Ink, and Premium glossy paper, so as to remove this issue, is this a case of my screen needing to be calibrated?
I have considered buying the Spyde Studio calibrator to ensure that this is correct, (do I need to?) and I have read as much as I can about setting up Adobe to manage the print settings and colours, but still no luck.
My current settings are as follows
In Adobe Bridge, my creative suit color settings are set to Europe General Purpose 2
The in Adobe Photoshop (version 11.0.1) I am selecting under colour management, Document Adoby RGB (1998), Photoshop handles colours, Printer profile is Epson sRGB Colour Space, Rendering intent is Relative Colourimetric, and I have ticked the following boxs, Blackpoint compensation, Match print colours, Gamut warning and Show paper white.
Can some one please advise me?

I too have had problems with prints being much darker than what I see on screen.
Below is my solution which works fairly well for color prints--not as well for grayscale.
I used the huey Pro monitor calibrator purchased only a couple of months back to make my prints look right and be consistent.
1.       Use the huey to calibrate the monitor
2.       From Photoshop (CS4), I select the ICC profile for my Epson 2200 printer and the paper being used. I then set up soft proofing in Photoshop (in the View menu) which allows me to see on screen how the image will be printed. Usually it is a bit darker than I like.
3.       so I adjust the brightness such that in the soft proof view, the image appears as I wish.
4.       There is more yet to do in that you have to set various settings for the print process like letting Photoshop manage colors, setting no color adjustment for the printer. And a few more minor settings regarding the printer
By the way, there is something wrong with the print driver for the 2200 in XP so that when you come to the last screen before printing, the print preview has a very red tint. You simply ignore that since the print has none of that. This is in XP. Possibly Windows Vista has a driver that doesn’t do that.
This has given me good quality consistent prints the first time they are printed—at least on the few I have done since getting the huey

Printing problem with Photoshop cs4, need help

I'm using PS CS4, with a Canon Pixma iP4200 and Mac os 10.6.2. I CAN print from other programs such as TextEdit or Pages. And my printer prints a test page without any problems. However, when I try to print something from PhotoShop, the printer dialogue box opens, I see the image in the preview and the page rolls through my printer...without anything on it. Does anybody know the reason for this?? Thank you for your help.

I haven't heard of anyone else with those specific symptoms.
But another poster has had problems with his Canon 9900 not printing (but no blank page).
The first thing to do is make sure you are using the Canon drivers and not the GutenPrint/GimpPrint drivers.
After that, you probably need to check with Canon.

Print quality from network printer

poor print quality from HP wireless pc, Windows 7 64-bit, to wired network printer (Epson 500 all in one). Print Quality from desktop pc is great.

Happy Friday eve! It appears you are using a Epson printer This forum is used to troubleshooting HP printers. I would suggest using Epson support center to see if it can help resolve your issue. Welcome to Epson Support Be sure you have full cartridges and you are not using a Draft or low quality print setting.
Good luck!
-SeanS
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Strange system log error from Photoshop CS4

Hi.
I keep getting this strange system log error from Photoshop CS4.
It comes after a wile when using PS CS4.
I tried to chance the memory settings and scratch disc to see if that helped. It didn't.
I also checked all my ram for anything bad. 16GB in my Mac Pro Intel OS X 10.5.6
Everything is updated to latest included Adobe apps.
This is the system log error
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** error: can't allocate region
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** set a breakpoint in malloc_error_break to debug
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: Adobe Photoshop CS4(305,0x6a73720) malloc: *** mmap(size=132911104) failed (error code=12)
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** error: can't allocate region
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** set a breakpoint in malloc_error_break to debug
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: Adobe Photoshop CS4(305,0x6a73720) malloc: *** mmap(size=132911104) failed (error code=12)
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** error: can't allocate region
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** set a breakpoint in malloc_error_break to debug
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: Adobe Photoshop CS4(305,0x6a73720) malloc: *** mmap(size=132911104) failed (error code=12)
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** error: can't allocate region
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** set a breakpoint in malloc_error_break to debug
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: Adobe Photoshop CS4(305,0x6a73720) malloc: *** mmap(size=132911104) failed (error code=12)
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** error: can't allocate region
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** set a breakpoint in malloc_error_break to debug
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: Adobe Photoshop CS4(305,0x6a73720) malloc: *** mmap(size=132911104) failed (error code=12)
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** error: can't allocate region
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** set a breakpoint in malloc_error_break to debug
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: Adobe Photoshop CS4(305,0x6a73720) malloc: *** mmap(size=132911104) failed (error code=12)
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** error: can't allocate region
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** set a breakpoint in malloc_error_break to debug
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: Adobe Photoshop CS4(305,0x6a73720) malloc: *** mmap(size=132911104) failed (error code=12)
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** error: can't allocate region
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** set a breakpoint in malloc_error_break to debug
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: Adobe Photoshop CS4(305,0x6a73720) malloc: *** mmap(size=132911104) failed (error code=12)
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** error: can't allocate region
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** set a breakpoint in malloc_error_break to debug
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: Adobe Photoshop CS4(305,0x6a73720) malloc: *** mmap(size=132911104) failed (error code=12)
Apr 7 16:04:03 mugge [0x0-0x28028].com.adobe.Photoshop[305]: *** error: can't allocate region
And it keeps on until i close Photoshop.
Please anybody ?? i cant figure out what this means.
Thx for help.
Erik S

Now i get this system log error ?
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: *** error: can't allocate region
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: *** set a breakpoint in malloc_error_break to debug
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: Adobe Photoshop CS4(651,0x6a73720) malloc: *** mmap(size=132911104) failed (error code=12)
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: *** error: can't allocate region
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: *** set a breakpoint in malloc_error_break to debug
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: Adobe Photoshop CS4(651,0x6a73720) malloc: *** mmap(size=132911104) failed (error code=12)
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: *** error: can't allocate region
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: *** set a breakpoint in malloc_error_break to debug
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: Adobe Photoshop CS4(651,0x6a73720) malloc: *** mmap(size=132911104) failed (error code=12)
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: *** error: can't allocate region
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: *** set a breakpoint in malloc_error_break to debug
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: Adobe Photoshop CS4(651,0x6a73720) malloc: *** mmap(size=132911104) failed (error code=12)
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: *** error: can't allocate region
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: *** set a breakpoint in malloc_error_break to debug
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: Adobe Photoshop CS4(651,0x6a73720) malloc: *** mmap(size=132911104) failed (error code=12)
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: *** error: can't allocate region
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: *** set a breakpoint in malloc_error_break to debug
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: Adobe Photoshop CS4(651,0x6a73720) malloc: *** mmap(size=132911104) failed (error code=12)
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: *** error: can't allocate region
Apr 29 14:45:02 mugge [0x0-0x32032].com.adobe.Photoshop[651]: *** set a breakpoint in malloc_error_break to debug
and this from Bridge ???
Apr 29 16:35:45 mugge Adobe Bridge CS4[650]: Adobe Bridge CS4(650,0xb0e8f000) malloc: *** error for object 0x29777980: double free\n*** set a breakpoint in malloc_error_break to debug
Apr 29 16:35:45 mugge Adobe Bridge CS4[650]: Adobe Bridge CS4(650,0xb0e8f000) malloc: *** error for object 0xcb73827b: Non-aligned pointer being freed\n*** set a breakpoint in malloc_error_break to debug
Apr 29 16:35:45 mugge Adobe Bridge CS4[650]: Adobe Bridge CS4(650,0xb0e8f000) malloc: *** error for object 0x29777980: Non-aligned pointer being freed (2)\n*** set a breakpoint in malloc_error_break to debug
Apr 29 16:35:45 mugge [0x0-0x31031].com.adobe.bridge3[650]: Adobe Bridge CS4(650,0xb0e8f000) malloc: *** error for object 0x29777980: double free
Apr 29 16:35:45 mugge [0x0-0x31031].com.adobe.bridge3[650]: *** set a breakpoint in malloc_error_break to debug
Apr 29 16:35:45 mugge [0x0-0x31031].com.adobe.bridge3[650]: Adobe Bridge CS4(650,0xb0e8f000) malloc: *** error for object 0xcb73827b: Non-aligned pointer being freed
Apr 29 16:35:45 mugge [0x0-0x31031].com.adobe.bridge3[650]: *** set a breakpoint in malloc_error_break to debug
Apr 29 16:35:45 mugge [0x0-0x31031].com.adobe.bridge3[650]: Adobe Bridge CS4(650,0xb0e8f000) malloc: *** error for object 0x29777980: Non-aligned pointer being freed (2)
Apr 29 16:35:45 mugge [0x0-0x31031].com.adobe.bridge3[650]: *** set a breakpoint in malloc_error_break to debug
Chris. also read my post just before this one plase. thx

How can I upgrade from Photoshop CS4 to Cs 5 or 6 without buying the creative cloud?

How can I upgrade from Photoshop CS4 to Cs 5 or 6 without buying the creative cloud?

Well CS5's ship has sailed.
CS6 can still be purchased on Perpetual License but it's not going to have all the bells & whistles that the current versions have. Just as long as you understand what you're getting.
Creative Suite 6
Nancy O.

Controlling print quality from the touchscreen on the MG6320

Hello, I have a two-part question. I'm interested in controlling print quality from the touchscreen display.
1. Can I set print quality (i.e. - choose draft/fast mode) from the touchscreen display?
2, if I can and do set it there, will my selection apply to all future print jobs until I change the setting again, or will it just apply to the one print job in the queue at the time, etc?
I hope my questions are clear. Many thanks for your help.
Solved!
Go to Solution.

Hi Ralp51,
The print quality of documents printed from your computer is controlled be the printer driver on the computer. The quality cannot be adjusted from the PIXMA MG6320 itself.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Unable to print from Photoshop CS4 in an iMac OS 10.6.3 to large format printer Epson 11880

Hi there! I was wondering if you could help me with this case.
Old computer: Mac G4 (purchased in 2002)
Old OS: OS 10.4.11 (Tiger)
CPU: Dual 1.25 GHz
Memory: 2 RAM
Software: Photoshop 7
Hardware: Large format printer: Epson 11880 (64” wide monster). Prints large posters, banners, etc.
As you can see, it is time for an upgrade...
New computer: iMac
New OS: OS 10.6.3 (Snow Leopard)
Processor Name: Intel Core i7
Processor Speed: 2.8 GHz
Number Of Processors: 1
Total Number Of Cores: 4
Memory: 16 GB
Software: Photoshop CS4
Hardware: Large format printer: Epson 11880
Situation: We hooked up everything and managed to print on the 11880 printer 2 times and printed two large format prints. On the third attempt, we encountered a serious problem...
Problem: After opening a file in Photoshop and sending it out for printing in the large format Epson printer, the file goes to the printer queue and stays there for 6 seconds, and then it disappears. It does not print. :-(
What we have done so far:
We made sure we downloaded the latest printer driver for this printer from Epson’s website.
The printer driver is correct. The computer talks to the printer and we are able to execute all the commands from the printer utilities panel. (i.e. check ink levels, clean heads, etc.)
And yes, the printer is okay, because we have been using it with the old G4 machine for about a year.
This problem got so frustrating, that we thought that something we transferred during the computer installation might be the culprit. So at one point we erased the hard drive on the new computer and reinstalled the operating system, and have not put any files from any old computers into this machine. The computer has nothing else in it. Except: The operating systems, and the Mac applications that come when the Mac comes out of the box. The only other program installed in it is Photoshop CS4 and the printer driver.
We were wondering if this was just a printing problem, period. So we added a small printer to the computer - and old Epson 2200 we have. We sent a file to this printer and there is not problem.
Perhaps, the file size might have been an issue? It does not matter. We can send a large 60 MB file to the printer or a small photograph measuring only 8 x 10, and these will linger in the queue for 6 seconds, and disappear never to be printed.
Temporary relief came when we got rid of Adobe Photoshop’s Preferences file. After getting rid of the file and allowing Photoshop to reconstruct it, we managed to print two large files on the printer. Then it failed again. Tried getting rid of the preferences again, and the trick did not work anymore. :-(
Another temporary relief came when we created another user in the computer. On the new user account it printed again a couple of times only to fail later.
And yes, the printer WILL print from other Mac programs. If for instance, we open a file on Preview, and send it to the printer and the file will be printed. And yes, we have managed to print very large files with this method.
In the last couple of days, we have spent 3 hours on the phone with the guys at Epson. They verified the driver and because the computer seems to be communicating with the printer and printing from other Mac applications, they suspected that the problem is with Adobe.
We called Adobe once, and spent 30 minutes with an Indian fellow who concluded that the problem was with how the computer handles the spooling. According to him, Photoshop sends the file to the computer and the computer seems to get rid of it. So he passed the buck and told us that the problem was with Apple.
We called Apple and spoke for 30 minutes with a friendly technician, who transferred us to a higher level techno-geek. I spent 1 more hour on the phone with Apple, and we tried everything. We went through Adobe’s knowledgebase and tried every suggested solution (see Adobe’s KB406452). It was with him that we found a temporary fix of removing the Preferences file, but the solution was short lived. He finally thought the problem was with Adobe as the printer is able to print from all applications EXCEPT Adobe Photoshop.
We called Adobe for the second time...and after waiting on hold from 1 entire hour, we got an Indian technician, that bless his heart, had a very thick accent and had no expertise, in my opinion. He was good at collecting data and he even made me share my computer screen so that he could troubleshoot the problem. After being constantly put on hold by him (because he had to consult with someone else), he passed the buck and said that it was Apple’s problem. I just told him that it was not as likely because all programs print EXCEPT Photoshop. After trying what I would consider a “hail Mary” of DELETING all the printers from my Library folder, and not replacing them, he recorded a case number for another Adobe technician to call us in a few days.
Because the above technician completely blew the Library, I just erased and reinstalled the OS. This time, I did not allow the OS to be updated - from 10.6.2 (that comes in the box), to 10.6.3. We tried printing using the 10.6.2 and had the same problem. :-(
Conclusion: I think it is a problem of Adobe CS4 not getting along with Apple’s new operating system. The Epson printer is doing fine, because it has been a product that has been in the market for almost 3 years. What is disappointing is that none of the companies wants to man up and say that it is a problem and that they are willing to work on it. Instead they pass the buck to the next company.
I can’t believe I am the only person experiencing this. Has anyone had this problem, and have you found a solution or workaround for it?

Dear Doyle, John and Gator Soup,
Thank you for your kind replies to my problem.
PS is assigned 70% RAM. In fact, I have never had so much RAM in my life. Files open at lightning fast speed! :-) We have never considered a RIP as we do not have an intense workload. In fact all the files we have tried to print print well on our old G4 with Tiger and Photoshop 7, which at the moment has saved our butt. However it would be nice to get the new faster machine with Photoshop CS4 to talk to the Epson 11880.
Yes, we are printing directly to the printer. We have hooked up the computer via a 6 ft USB cable to the unit.
The specs and pixel dimensions of a typical file we print are:
Type of file: tif (in this case it is an RGB file) // However, we avoid any color management from the computer or the printer when printing it at this time.
File size: 60 MB
Pixel size: 6796 x 3100
Print size: 34" x 16" @ 200 dpi
I have not tried saving it as a pdf yet. Will try that next.
I did go to the Console on the Mac though, and recorded its activity between 5:14 pm - 5:19 pm when I tried to print a file.
Remember, the symptoms are: We send a file to the printer...The file goes to the printer queue, and it lingers there for 6 seconds. The file then disappears.
Although there is a cryptic message of "invalid colorspace" in the log, I don't believe that the file is corrupt. First because we have tried several files, second because smaller versions of these can be printed in another Epson 2200 printer, and third because the large format images can still be printed using our old G4 machine with Tiger and Photoshop 7.
This might provide me with extra ammunition for when I call both Adobe and Apple on Monday. Apple has been quite good on customer support - particularly when they upgrade you to higher level geeks. ;-) Do you have any idea I what time I should call Adobe so that I can get people on the western hemisphere to answer the phone? It seems that after a certain time they start speaking with an Indian accent over there.
Enclosed, for whatever is worth, is the Console's log:
5/15/10 5:14:46 PM System Preferences[2947] Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
5/15/10 5:14:46 PM [0x0-0xf00f0].com.apple.systempreferences[2947] System Preferences: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/Adobe Unit Types.osax" declares no loadable handlers.
5/15/10 5:14:46 PM System Preferences[2947] .scriptSuite warning for result type of command 'timedLoad' in suite 'SystemPreferences': the type NSNumber ('long') doesn't match the result Apple event code ('doub').
5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] Adobe Photoshop CS4(2991,0xa0818500) malloc: *** error for object 0x4b00880: Non-aligned pointer being freed (2)
5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] *** set a breakpoint in malloc_error_break to debug
5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] Adobe Photoshop CS4(2991,0xa0818500) malloc: *** error for object 0x4e14390: Non-aligned pointer being freed (2)
5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] *** set a breakpoint in malloc_error_break to debug
5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] Adobe Photoshop CS4(2991,0xa0818500) malloc: *** error for object 0x4e14410: Non-aligned pointer being freed (2)
5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] *** set a breakpoint in malloc_error_break to debug
5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] Adobe Photoshop CS4(2991,0xa0818500) malloc: *** error for object 0x4e14490: Non-aligned pointer being freed (2)
5/15/10 5:17:06 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] *** set a breakpoint in malloc_error_break to debug
5/15/10 5:17:08 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] file://localhost/Applications/Adobe P
5/15/10 5:19:34 PM [0x0-0xf60f6].com.adobe.Photoshop[2991] Sat May 15 17:19:34 Norm-Nielsens-iMac.local Adobe Photoshop CS4[2991] <Error>: CGImageCreate: invalid image colorspace: NULL.

Poor B&W print quality from Photoshop CS4

Similar Messages

Maybe you are looking for