Poor black and white quality in calendar

Hi there,
Last week I ordered two calendars via iPhoto.
The canlendars only contains black and white photos but the photos in the calendars I received are far from black and white. They have a stron yellow/reddish tint and looks nothing like the pictures I edited.
Is this a general problem with Apple print products that you cannot get true black and white pictures in books, calendars etc.
If so, I believe it should be stated somewhere that you should expect poor print quality from black and white pictures. And if not, is it possible to have my calendars reprinted in a better quality?
Best regards,
Stefan Nielsen

This Apple doucment, iPhoto: Image differences between books and prints, discusses B/W prints and their colorization. However, what you've described is not what they describe so it might be a printing glitch. Contact Apple for a redo.
OT

Similar Messages

Hp psc 950 printer only prints black and white, no driver for Canon lpb 5000

Hi everyone,
I am trying to install my two printers on mac book pro.
Problem 1.
My HP psc 950 printer is only printing in a bad black and white quality - no color at all?? - any idea where I can download a printerdriver that is actually up to date? The one mac book has preinstalled seems not to be the right one?
Problem 2.
My may can´t find a driver for my other printer Canon LPB 5000 at all. I´ve already downloaded the canon drivers for Mac book - so I see a long list of Canon drivers but the LPB 5000 is not there and I don´t find any download of it in the web. I work with os x 10.7 and there is just an old mac driver for 10.6 to be found on the Canon website. I downloaded it but still does not work.
Hope someone can help. Both printers used to work fine on Windows but I am changing to Mac now and need to get them work.
Thanks,
K.

Canon LPB5000 driver for 10.7 is at http://support-au.canon.com.au/P/search?model=LASER+SHOT+LBP5000&menu=download&f ilter=0&tagname=g_os&g_os=Mac%20OS%20X%20v10%2E7
There is also this note: When using with OS X Lion, install this printer driver, and then register the printer. For information on how to register ... support-au.canon.com.au/contents/AU/EN/0100359005.html

Poor print quality black and white

I'm using a psc 2410xi "all-in-one"
I've got some old 81/2 x 11 black and white photos I'm trying to copy. About half the picture comes out great, the other portion is faded or washed out. I tried changing the black print cartirdge with a new one and that made no difference.
Any Ideas?
Bruce

I'm using a psc 2410xi "all-in-one"
I've got some old 81/2 x 11 black and white photos I'm trying to copy. About half the picture comes out great, the other portion is faded or washed out. I tried changing the black print cartirdge with a new one and that made no difference.
Any Ideas?
Bruce

Quality of black and white imagery

I'd like to make a book incorporating some fine art black and white photographs. I remember five or six years ago when Apple started printing iPhoto books that they discouraged submission of black and white imagery because they reproduced poorly. Does anyone have any recent experience making a book using Aperture that incorporates black and white imagery? If so, please comment on pros and cons, especially regarding reproduction of highlight and shadow detail. Thank you.

I created and ordered a B&W softcover book last year. I was very happy with the image quality. Last week I ordered a hardcover of some high quality (39 megapixel camera) B&W images and just emailed Apple for a reprint. The cover (front and back and flap) images are beautiful. Full detail, crisp blacks, etc... But every image inside has a greenish/bluish tint or overcast to it. All specs are correct with the images so I was very, very disappointed.

I have HP Deskjet 3510 connected wireless - problem is that it wants to print only black and white - is there a color button I am missing? The print quality report is fine in color etc.

I have a HP Deskjet 3510 and it wants to print only in black and white.
The Print Quality Report is fine and in color.
Is there a color button I am missing?

In the Print & Scan system preferences, does it indicate it is using a generic printer driver or a Gutenprint driver?
Also, if you click on Options & Supplies, you might want to check and see if has to be enabled. That kind of sounds odd though.
Another thing is it might not be showing. If the bottom of the print dialog has a button that says "Show Details," click it. Then, you can change settings in the popup menu.

HT4356 How can I print a greyscale/fast document from my iPad wireless printer. It will print in color and high quality but want black and white

How can I print a greyscale/black and white document from my iPad wireless printer???
IT will print in COLOR and high quality print but would like to conserve ink (Esp. Coloured )
is there a way to reconfigure settings either on my iPad or the printer ??? Cannot find a setting
when u select print on the ipad it dos not allow you to change your settings before you print

There is no setting for this. You can request it here:
http://www.apple.com/feedback/

Canopus ADVC 110 - picture split in two, black and white, distorted sound

Hi there - I've just recently bought a Canopus ADVC 110 - unfortunately I cannot get the picture to display properly - I've spoken to Apple and to Canopus, but neither seems to be able to help me sort this out.
Basically my imovies does receive a visual and an audio signal from the ADVC 110 ... but the picture is split in two (top half on the bottom, bottom half on the top), its black and white when it should be colour, and the sound is heavily distorted.
The help people at Canopus tell me that this appears to be an issue with PAL and NTSC settings and that there have been reported problems with importing analogue signals from combined VHS/DVD players (which is what I have). They've suggested that the box (ADVC 110) is being 'confused' by multiple signals coming from the VHS/DVD player (this doesn't help me much though). They talked me through arranging the settings so that the Video cassette, the ADVC 110 and the VHS/DVD player are all set to PAL, then have changed the setting in imovies to also read PAL - imovies then tells me that the camera connected is not using the same format (despite the letters 'PAL' on the front of the thing) - changing the imovies setting back to NTSC allows the signal to be received, but in the way described above ... OK, then its the issue with the combined signals from the VHS/DVD player ...
... but, I've now tried it with 2 other VHS players (not combined with anything else, but both supporting both PAL and NTSC ) and the result is exactly the same - I've tried it with every combination of the relevant switches on the bottom of the ADVC 110 - either the picture is as above or imovies will not import (or allow me to view) the picture or sound.
I've tried different cassettes - I've used both SVideo and 3 phono (red, yellow, black) as well as scart connections on th eback of the various VHS players - I've tried restarting the computer, the ADVC 110 and the VSH player - I've disconnected the ADVC 110, and quit imovies, between each attempt - the result is the same each time.
I've tried to find more about this on the internet, but this specific problem doesn't seem to come up - maybe I'm missing something or phrasing my searches badly.
Has anyone any suggestions on where I go from here (rather than bringing it back to the Apple shop and asking for a refund)?
And sorry for the length of the question!
Stephen
ibook G4 Mac OS X (10.3.9) using imovies 4.0.1

Hi Estaphin
Welcome to discussions. I use a Canopus ADVC 100. It's similar to yours. I've never had a problem with it. I've used it connected to a VCR and an analog video camera. Then imported the video into im for various projects.
Try this. First clean the heads on your VCR. Connect an RCA cable to the L/R/ V out on the VCR. Next, connect it to the Canopus front panel - in. Connect the fire wire out on the Canopus front to the firewire in on the Mac.
Put the VHS tape in the VCR. Don't start it yet.
Open im. Set im for a new project. Turn on the Canopus from the on off switch at the back. From the input select button on the top left front of the canopus, select analog in.
Press play on your VCR. im should recognize the signal. In im select import. Your video should begin importing fine. The qulaity of the images on your computer screen will appear to be poor -- dark, faded, etc. This poor quality is for two reasons. First, analog tape can degrade fast depending on how often the tape was used previously, and how it was stored and at what tempertures.
Second, im will display the image darker because of conversion. But, don't worry. Once you burn the finished product to DVD, you'll be surprised how clear the picture is compared to what you viewed in im.
Make sue your DIP switches on the bottom of the canopus were/ are put back to the original settings.
Try that. I hope it helps
Carl
imac 17 superdrive, 1.25GHz Power PC G4 1.25 GB RAM Mac OS X (10.4.2) Airport Express, 180 GB Maxtor external HD, Dell Latitude lap top Windows XP

Printing in Black And White

I'm using iPhoto '08 7.1.5 and trying to print a color photo that I made black and white and it only prints the blackest blacks and the whitest whites, but nothing in between, giving me a partially printed picture. Is there some kind of setting that will allow me to print the entire picture in black and white? Any help is greatly appreciated!

Welcome to the Apple Discussions. Check the various printer setting panes from the menu in the print window for one that has a grayscale checkbox or setting. . For my Canon the grayscale box is located in the Quality and Media section. For my Epson printer it's in the Print Settings section under the Color menu. Select it and try again.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

Dvr620ku only shows black and white using HDMI cable

I connected the av cables and they showed black and white, now im connected through hdmi and same problem watching vcr tapes... what can I do besides trying a component cable?

I would recommend trying composite (not component) video. There is one jack, color coded yellow, at the bottom right when looking at the back of the unit. Run that into your TV. Your TV likely has a combination component/composite video input. If so, you'd connect the output from the DVR620 into the Y input on the TV and connect nothing into Pb and Pr. If you're uncertain, post back with the model number of your TV so I can check its manual online. I'm not sure why HDMI would give you black and white unless the tracking and picture quality is poor with the VHS tape. I have tested this scenario multiple times with my DVR620 and always get color. Presumably you get color when playing back DVDs? If you have L1 or L2 connected to a cable box, I recommend you record a brief segment off of a TV channel onto VHS, and then test playing that back to see if that is in color or black and white.

Print black and white on HP Officejet 6700

I have an IMAC operating system 10.8.1. I can't get my HP 6700 to print only black and white. Even when I choose fast print black and white, it won't print that way. I can't set up any new print preferences. Now I am out of yellow ink and can't print anything. Went and bought brand new black ink, and printer recognizes that black ink is full.
I'm sure just something I am doing wrong. Can anyone help?
This question was solved.
View Solution.

Hello again Qwert123,
This may be a combination of a couple of issues, or more to the point, a timing issue. You mentioned being out of Yellow and cannot print. This pulled from the User's Guide, page 74. I hope this helps........
Print when one or more ink cartridges are depleted
The printer can still operate when the black ink cartridge or one or more color ink
cartridges are depleted, but it will print more slowly. Also, the quality of printed documents
might be affected.
The printer will not be able to print when both the black cartridge and a color cartridge
are depleted.
• If the black cartridge is depleted, any black color in printed documents is created using
a combination of the remaining colors. As a result, blacks might not appear to be as
dark.
• If a color cartridge is depleted, the printer will print in grayscale using the black
cartridge.
When possible, replace any depleted ink cartridges. For information about how to install
new ink cartridges, see Replace the ink cartridges.
CAUTION: While ink cartridges are not damaged when left outside of the printer,
the printhead does need to have all cartridges installed at all times after the printer is
set up and in use. Leaving one or more cartridge slots empty for an extended period
may lead to print quality problems and possibly damage the printhead. If you have
recently left a cartridge out of the printer for an extended period, or if you have had a
recent paper jam, and have noticed poor print quality, clean the printhead. For more
information, see Clean the printhead.
Chapter 7
74 Work with ink cartridges
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

My Imac has black and white vertical lines

Riddle me this Apple...
A few months ago, my 2008 Aluminium 24inch Imac locked up and exhibited space invader style pixels all over the screen.
After rebooting, it was fine for a while and then it would freeze again and I'd get the same Atari style pixels appearing, and everything would be frozen.
Then, most reboots after that, I would get vertical lines in groups of three, alternating black and white squares as in the photo.
I called Apple here in South Australia, and they said "it's your graphics card, and it will cost $400 to fix and we need it for a week".
Not wanting to do that, I bought a $15 firewire cable, booted the Imac in T mode and used my PC laptop running macdrivepro to save all my files onto a 500gig backup drive, and then proceeded to fix the corrupted kext files and most importantly delete the recent flash player update which I believe was causing the problem.
Booted her back up, and she ran perfectly. For a few weeks, until it started again.
So I re-installed the Leopard operating system from the original disks, and that fixed it. $15 is better than $400.
Now, a few months have passed, and the problem had come back again, now that I have added more stuff on my computer.
This time however, I chose to wipe the drive completely and do a fresh install of Leopard, and then upgrade to Snow Leopard.
The problem is that it won't boot from the CD drive anymore, won't boot from a thumb drive, won't boot in any mode except T mode, but then it has these lines on the screen again and eventually I get the kernel panic happenning and it wants to be shut down.
Every time I start the computer, these lines IMMEDIATELY appear. I've tried resetting the Pram, tried changing memory and have now resorted to surgery.
I've taken apart the Imac, yes I hear you Apple...you guys thought that we mortals wouldn't delve into the depths of your finely machined systems, however, some of us do own micro torx head tools to remove those pesky screws, and yes, a razor blade does lift up the magnetically attached screen glass without having to use suction pads.
So once inside the temple of doom, I removed the hard drive, and dropped it into a hard drive dock.
After days of messing around with it via four other MAC computers, running Tiger, Leopard and Lion, we have still not been able to install an operating system back onto this drive.
Does anyone have any insight into what these lines actually are? Every one I speak to says a different thing...
"It's the graphics card", "It's the hard drive", "It's the cable that connects the LCD screen", "It's the motherboard", It's the screen itself", "It's a corrupted bios" etc etc..
But if it's any of those things...then why did it run perfectly after I fixed it the first time?
Any and all help is greatly appreciated.

Hi BDAqua,
I appreciate you taking the time to reply, and for the suggestions.
My spider sense was tingling, as were my eager fingers to login and read your reply, in fact I was almost salivating at the thought of crushing those Apple reps with a swift blow from one of my megalithic old 4gig internal drives, or better still, perhaps shooting my old DX266 sporting a massive 256k HD and 4mb of ram, fully loaded with Encarta and Windows 3.11 out of a cannon and straight into Steve Jobs bedroom window, with a note saying..."How'd ya like them apples..".
But alas, my Aquatic friend, I am in need of a functioning operating system to be able to do any of those magical tricks you suggested (insert frown face here)..and yes, when I finally opened up the Imac and peered inside, a moment not unlike Indiana Jones peering down into the depths of the Well of Souls, I suddenly realised that an Imac might look impervious to heat vision and thermonuclear devices on the outside, but inside they can still gather as much dust as my infinately useless ZIP drive that I bought back in the late 90's, thinking it was the best thing since the invention of microsoft paint...awesome program by the way guys..
Getting back to the problem at hand, the issue really is that I have, perhaps stupedly, reformatted the 500gig WD drive via a hard drive dock, which is really a lot like one of those early 1950's cassette drives you find in vintage cars..
And upon returning the drive to the Imac and re-assembling it WITH REAL SCREWS, not titanium-alloy fingerprint encoded ones like you would expect to find in Iron Man's suit, I could only boot the poor thing into T mode. No other modes were available, and believe me, I tried all of the alphabet...even the "C" button, which if you ever watched an episode of Knight Rider called Knight of the Juggernaught, did not turn my computer into a convertable..
By now you're probably sensing that the irony of all of this is that I am typing this message on my Windows 7 upgraded HP laptop, which sounds not unlike a jumbo jet taking off at times, the fans are so loud, and among other things, it keeps telling me it is not genuine, even though I paid good money for a proper copy to free me from the painful experience which was Vista, and so in a sense, microsoft is playing a small part in the desperate rescue of it's far superior, yet broken down and busted arch enemy...I bet somewhere in it's RAM, it is smiling in little ones and zeroes, while it hides behind a free copy of AVAST, hoping one of a billion nasty viruses don't come knocking on the kernel door..
The next round of drinks goes to the man, woman, child or droid that has any other suggestions that could allow me to participate in some of the ideas put forward by our very knowledgable watery friend..as alas, I do not have any of those options available to me.
Today's assignment is.. how do we install an operating system on a formatted external drive. Sounds easy doesn't it...I've read many articles, but in practice it's proved as elusive as Bigfoot.
I just cannot make this hard drive understand that there is no spoon...
EdStraker

How to set default to convert a document to a black and white pdf file?

I have dozens of color Word files that I need to convert to black and white pdf files on a weekly cycle. I figured out that I can do this for individual files by clicking "print", "properties", then choose the "paper/quality" tab, and then click on "black and white". However, I cannot make the "black and white" selection permanent. That is, the next file requires me to go through the same four-step process to convert a Word file to a black and white pdf file. Any suggestions on how to make the "black and white" selection permenant?

Sorry. I forgot to mention that I am using Acrobat Adobe Pro 9.4.2.

How do I print black and white on Mountain Lion?

Hey.
Does anyone know how to print black and white on Mountain Lion?
I searched the community and Google but I couldn't find anything...
Regards,
TeaDragon

It's usually in the Print dialog when you File > Print. Select the Show details button, the change the option in the horizontal line to Paper Type/Quality. Click the Color Options triangle and change Color to Greyscale.

HT204135 This is my first iMac. How come everything I print is in black and white? I have an HP Photosmart and it prints in color just fine except when I print using the iMac.

Unlike my other computers where I can change the printer setup ( color, black and white, paper type etc) I don't see that option on the iMac. Is it called somethng else? I want to retire my old computer but can't until I can print in color.

Thank you, I did that, after I click "show details" I see where I can change the paper size, reverse print etc. but I'm not seeing an option to swtich to color. On my HP and IBM PC's I can click on printer properties and change the print quality, paper type ( e.g.photo), grayscale and such. Do you by chance know if this is not an available feature on iMacs or maybe my printer isn't iMac friendly?

Hp officejet pro 8500 a910 does not give me the option of printing in black and white

Hello,
My hp officejet pro 8500 a910 does not give me the option of printing in black and white. How do I choose to print in B&W when the option does not show up under properties?
Thank you.
This question was solved.
View Solution.

Hi,
From the application being used to print, Click File > Print
Click Properties or Preferences to access the Printing Preferences Dialog.
Click the Advanced button at the bottom of the window.
Under Printer Features, Click the Print as Grayscale selection box and set as High Quality Grayscale or Black Ink Only.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Poor black and white quality in calendar

Similar Messages

Maybe you are looking for