Poor carrier signal

Since upgrading to iOS 4.2.1 has anyone had any trouble holding onto a carrier signal.
I seem to be in a constant search for networks situation.even when a signal is found it drops out very quickly and searches all over again.
Haven't been able to use phone effectively for almost a week now
Any ideas from anyone

Same here.. Now Is Good to throw IT out of The window. Any solution?

Similar Messages

  • HT5012 My iPhone carrier signal strength is not good

    My iPhone carrier signal strength is not good

    I have a "case" open with Apple for poor carrier signal strength after upgrading my iP5 to iOS7.
    Please make sure you open a case with Apple.

  • Carrier signal is poor in iOS7

    After installing iOS7, my iP5 has a very poor/variable carrier signal strength. iP5 is on EE in the UK. Has anyone else got this problem?

    Hi John,
    This has been really frustrating for many of us Apple lovers.  Almost everyone in my family owns two or more Apple products, until this mess.  
    My daughter was due for a new phone and then IOS 7 made hers useless, to the point where she is able to make calls on a rare occasion because it constantly goes into searching mode.  So as of yesterday she went to the other side and bought an android phone and loves it.  My son now because of his IOS 7 issues, is asking for an Android and my wife is unable to use her IPad half the time due to searching while on cell or dropping Wi Fi every 30 seconds, is now asking for a Windows Tablet.
    Their point, and a valid one, is if I have a device that I purchased to do a specific task, such as make and receive calls and it won't do that, it is useless and why pay for it.
    Apple is losing long time customers because they have taken once valuable tools and toys and created high priced paper weights of them.  I use my IPad for business and must say that with it being unreliable now, I am also looking at the windows tablet so that I can do my job.
    Apple, please address this soon or at a minimum, acknowledge the issue

  • Hi can you please help me to fix my iPhone 5 when I update it to the iOS 6.1.2 my carrier signal indicator states searching all the time please help me what to do

    HiHi can you please help me to fix my iPhone 5 when I update it to the iOS 6.1.2 my carrier signal indicator states searching all the time please help me what to do

    Hi Samantha,
    Are you aware that if you restore your ipad that you will lose all data from your ipad and very difficult to get it back unless you had previously made a back-up of your data on itunes or in the cloud. and that would be on the computer you set those up on. (There are some independent apps out there that might help restore data but I don't have any experience with them...)
    Also, I think if you restore on another computer you're supposed to have administrator rights and have the latest itunes update. And I think if you sync (if restoring is considered syncing with another computer, you'll be locked out of your computer or a new one.)
    I don't know if there is a way for you to safely eject your ipad from your mom's laptop and find another way, but please read this
    http://support.apple.com/kb/ts1275
    Also, I suggest you start a new post and title it something like First, stuck on update and now on Restore on another computer. Please HELP! And then tell the story of your problem that you originally included and your follow-up efforts to restore given a suggestion on previous post (though I think you SHOULD AVOID RSTORE if you can.) And refer them to your original post
    https://discussions.apple.com/message/22050045?ac_cid=tw123456#22050045
    Hope this helps and if you can get back to your ios before the upgrade, stay with it. I hope it all works out for you.
    FYI - If it's a new or refurb bought within the past year you might be able to have it replaced by Apple.

  • Poor wifi signal

    My New Macbook air has very poor wifi signal, I have to sit within feet of my router to have a usable connection, I cannot even use it in the next room.
    Does anybody else have this problem, and would purchasing a antenna booster or signal repeater do the job?

    Here are some troubleshooting suggestions:
    OS X Mountain Lion: Solve problems with connecting to the Internet

  • TS4003 HOW CAN I TURN OFF ICLOUD TO INPORT MY ORIGINAL MUSIC TO MY IPHONE INTERNAL MEMORY, SO THAT I CAN HEAR IT EVERYWHERE IN THE WORD WITH OUT THE NEED OF  A WI-FI CONEXION OR A TELEPHONE CARRIER SIGNAL, LIKE BEFORE ICLOUD WAS INVENTED?

    PLEASE TEACH ME HOW TO INPORT MY MUSIC WITHOUT USING ICLOUD WICH I SUSCRIBE THINKING THAT  IT COUD BE EVERYWHERE. BUT I DISCOVER THAT IT ONLY WORKS WITH A WI-FI CONECTION OR WHERE I CAN RECIEVE MY CARRIER SIGNAL. SOME PLACES I DO NOT HAVE NEITHER.
    HOW CAN I IMPORT ALL MY ITUNES MUSIC WITHOUT USING ICLOUD AND USING MY IPHONE INTERNAL MEMORY LIKE IN THE EARLY DAYS?
    PLEASE SHOW ME STEP BY STEP BECAUSE I TRIED EVERYTHIG IN MY NEW IPHONE 4GS WITHOUT NO LUCK. THANK YOU VERY MUCH!

    Welcome to the Apple community.
    Settings > music > iTunes Match

  • My iphone 4 drop down after that it start showing apple logo i have restored it after that it shows searching on carrier signal and shows that Connect to itune... when i connect it to itune, message came that there is some problem with your iphone.

    My iphone 4 drop down after that it start showing apple logo i have restored it after that it shows searching on carrier signal and shows that Connect to itune... when i connect it to itune, message came that there is some problem with your iphone.Please help me out.

    Hi ahsanikram!
    I have an article here for you that can help you troubleshoot this issue with your iPhone:
    iOS: Troubleshooting update and restore issues
    http://support.apple.com/kb/ts1275
    If you are still having issues after attempting the troubleshooting steps in the previous article, see the following article:
    iOS: Unable to update or restore
    http://support.apple.com/kb/ht1808
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • Full bar carrier signal but can't receive calls ?

    xperia Z2 i have a full bars carrier signal but whn anyone calls me it gives him a message as my phone is turned off .any help?

    Try the basic, turn off the phone > remove the micro SIM card > place it back on > try again
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • My iphone 4 Carrier signal is very weak just shows one bar and often shows No Service followed by searching and again one signal bar I have had a lot of drop calls, I have tested the sim card on my Samsung Ace which shows full Signal strength I am on the

    My iphone 4 Carrier signal is very weak just shows one bar and often shows No Service followed by searching and again one signal bar I have had a lot of drop calls, I have tested the sim card on my Samsung Ace which shows full Signal strength I am on the latest iphone firmware 5.1.1 with 4.12.01 baseband I have tried resetting the iphone did o full restore twice. I guess there is something wrong with the iphone hardware? Has anyone had similar issues and how they fixed it?

    Take the device to Apple or an Apple authorized service center and let them check it out.

  • I seem to have very poor wifi signal strength,is there any way to boost my signal

    I seem to have very poor wifi signal strength,is there any way to boost my signal

    If you gave some information on what network equipment you are using (make, model, version) and where you are experiencing signal problems it would help in giving advice.

  • Poor internet signal

    I often get a poor internet signal for no reason. I have a D-Link (DSL-G604T) router that is connected via an ethernet cable to my iMac. This works perfectly, but it is also connected to my husbands computer via airport and this doesn't always work properly. He is always able to connect to the network, but the signal strength is very inconsistent. The machine he uses is a 17" 1Ghz PowerBook and it's not in the same room as the router, it's in the next room and the connecting door is always open.

    Hello. I had not had my airport for 7 weeks after getting a new drive installed, and just the other day did it.... If I may (hoping to not anger Don) add one thing: the interference robustness that don advised clicking is the computer's interference robustness- you also want to do it to the base station (admin utility, configure, then the row of boxes, make airport the blue (checked ) box....then under wireless options near bottom of page, click, and a page drops down...it discusses multi-cast rate,and then you click that interference robustness tab, then the power setting (if not secure cut power back- if you are password protected, blast it). Then click OK,then click UPDATE at bottom.)
    (this last one is when the base station gets the instructions you gave it, it will restart,takes two minutes perhaps).
    Last night, I wandered my house with my unit, first time since august.... and WOW did my signal power drop when my air conditioner kicked in.... not for long, then it came back to about half while it ran the rest of the cycle...
    SO, any radio interference can have an effect: sun spot cycles, hair dryers, microwaves, all the stuff that used to put snow on a TV screen can weaken the signal. Sorry to be a buttinski... Peace C

  • VERY Poor Wireless Signals

    Hello everyone! I have a Linksys WRT54G v8 Wireless-G Broadband Router. I receive VERY poor wireless signals from it. There are no frequency interferences, physical obstructions, or anything like that. I have tried channels 1, 6, and 11 (non-overlapping channels), but did not seem to notice a difference. How can I adjust the Wireless -> Advanced Wireless Settings in order to improve the wireless signals? Thank you!
    Message Edited by Shadowz_O_Death on 08-27-2008 06:23 PM

    Shadowz_O_Death wrote:
    Hello everyone! I have a Linksys WRT54G v8 Wireless-G Broadband Router. I receive VERY poor wireless signals from it. There are no frequency interferences, physical obstructions, or anything like that. I have tried channels 1, 6, and 11 (non-overlapping channels), but did not seem to notice a difference. How can I adjust the Wireless -> Advanced Wireless Settings in order to improve the wireless signals? Thank you!
    Message Edited by Shadowz_O_Death on 08-27-2008 06:23 PM
    Hi
     Is the firmware up to date ?
    If not , then upgrade the firmware .
     U can even try channel - 9 !!
    Advance wireless settings : RTS threshold - descrease by 42.
                                                  Fragementation - decrease by 42.
                                                  Beacon Interval - change to 75 or 50.
    Observe the settings.
     pe@c3
    "What u Give , is wht u better start expecting to take back".. - http://Forsakenbliss.wordpress.com

  • Recovering carrier signal from AM demodulation

    Hi everybody
    I am trying to implement a full AM system I able to modulate and demodulate the baseband signal but could not create carrier signal.So any help would be thankful....Niladri
    Attachments:
    Funtion generator1.vi ‏23 KB

    Hello Ramsey,
    I assume you are trying to capture these AM signals and compare their relative phases all against each other. Sort of like saying the AM 1300 carrier is X degress in phase different from the AM 1530 carrier.
    This is what I would do. I would use the full PXI-5661 RF analyzer and capture the entire AM band in the acquisition. This is roughly a 1 MHz bandwidth. At this low bandwidth, a low IQ sample rate can be used with the PXI-5661 (1.25 MSamples/sec gives the PXI-5661 a 1 MHz IQ data BW). With this low IQ rate, you could actually stream the entire AM band to hard drive for some time.
    Since you have recorded the AM band to disk for a period of time, you can extract all the relative phase information you want. And the receiver reference is the same for all acquired data so the only variation will be due to the Tx side.
    Look at this example:
    RFSA Acquire Continuous IQ.vi
    located at:
    C:\...\<LabVIEW>\examples\instr\niRFSA
    Regards,
    Andy Hinde
    National Instruments

  • Carrier signal drop in ios8

    hi guys. recently updated my iphone 5s to ios8. after the update the carrier signal is dropping frequently. it doesnt happen in ios 7.1.2. any fix for this one?

    I'm having the same issue.  I upgraded via iTunes and it froze so I had to restore my phone.  When I restart the phone after a power down it works great for awhile and then the carrier keeps disappearing and the battery level plummets.  Restarting phone provides a temporary fix but is annoying.  My wife's iPhone was upgraded wirelessly and she did not have the freeze up or the problem with dropping carrier.

  • Poor wifi signal on ios 8.3

    Hi
    I am getting poor Wifi signal on my iPhone 6 with ios 8.3. I have to stand next to the router to get any signal
    All of my other devies (Laptops, iPad) are working fine and picking up the signal at a much further distance.
    Can you help??

    When I enter a static address it still connects to the network. But dynamic (dhcp) it sees the network, but will connect. Tried everything..

Maybe you are looking for

  • The Network Path was not Found - Server 2008

    I am managing a Windows Server 2008.  When I go into the Group Policy Management Council and attempt to edit, or add group policy it comes up with an error "Failed to open Group Policy [...] The Network Path was not found."  I am new to using Windows

  • Defeating browser jar cacheing

    I have a client whose customers use a couple of applets I wrote for the client and I need to make some improvements (new features) to said applets. Before I go any further I should say that the user base in this case is best described as "dumb as mud

  • Negative values are replaced by postive values

    Dear experts,                     I got an issue in a query that Negative values are replaced by postive values.... So i checked out the data in the data target i dint found negative values.... I checked out whether there are any formuales... So i ch

  • How can i two adobe digital edition windows?

    Is it possible to open two docs at the same time - strictly one document in two different windows ? I have to campare two parts of one document and it would be much easier if i can do it using two windows on my two monitors. Please help!

  • Error in goods issue witjout release of production order

    hi gurus, I have created production order but not released only created. Now  I am doing Goods issue in MIgo then it is not allowing. I want to know the reason for that.