Poor clip quality after applying slow motion or stabilization

I am making a movie. Every clip that I change to slow motion, or stabilize (or add both to), becomes blurry. I finalized it & put it on dvd to see if it still blurry on the tv, and it is. Anyone know how to fix these clips so I can get the original clip quality with the slow motion/stablilization?
Thank you in advance

I am using PPro CC 7.2.1 on Mac OS X 10.8.5. I'm working in software only renderer. Just by applying a Three-Way Color Corrector or a Video Limiter (just applied, without any modifications... didn't test other filters), the photo quality is degraded. The result is the same after exporting or rendering the sequence. Tested in DVCPRO-HD and ProRes interlaced sequences, same result.
Here is a photo without any filter applied to it (on the left) and with a video limiter (right) :
On another editing station with CUDA enabled, the problem isn't there. But not all our station are CUDA enabled, so I wish I could fix the problem.

Similar Messages

Very poor video quality after transcoding in Adobe Encore CS5.1

MERRY CHRISTMAS AND A HAPPY NEW YEAR!
I have very poor video quality after transcoding the video file (MPEG) in Adobe Encore CS5.1. Below you see my used settings in my filmproject.
The problem exists after transcoding in Adobe Encore CS5.1. I checked all steps and found out that there is no problem until transcoding. My exported file in MPEG has very good video and audio quality.
Facts:
1. Camcorder: Panasonic AG-AC160AEJ
Operating System : Windows 7, 64 Bit, Ultimate edition
Source files: MTS files
Recording settings (clip settings):
Type: MPEG Movie
Image Size: 1920 x 1080
Frame Rate: 25,00
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Pixel Aspect Ratio: 1,0
2. Sequence settings in Premiere Pro
Sequence was created from Clip directly with settings above.
3. Exporting settings in Adobe Premiere Pro:
Match sequence settings was activated. Now other changes were set.
4. Exported File:
Video
Image Size: 1920 x 1080
Data Transfer Rate: 25920 kBit / s
Frame rate: 25
Audio:
Bit rate: 384 kBit / s
Channels: 2 (stereo)
Frequence: 48 kHz
5. Transcoding settings in Adobe Encore:
I used different transcoding settings such as automatic DVD Transcoding, CBR and VBR.I also set “use maximum render quality”. But all results were always the same: very poor quality.
Why does the encore transcoding cause such bad video quality?
How can I solve this problem?
Please help me soon.
Best regards.

Hi Ann,
1) I did not only „Automatic (based on source)“ options in my tests, but also many other customized options.
The results are very poor. I have done a new test with the following settings. The result is also poor:
Download link: http://www.klavierlehrer-bayern.de/download/test_mpeg2dvd_1.m2v
Export Settings:
Format: MPEG2-DVD
Preset: Custom
Codec: MainConcept MPEG Video, Quality: 5
Frame Rate: 25 fps
Field Order: Upper
Pixel Aspect Ratio: Automatic (based on source)
Render at Maximum Rate: [active]
Bitrate Encoding: VBR, 2 pass
Minimum Bitrate (Mbps): 5
Target Bitrate (Mbps): 9
Maximum Bitrate (Mbps): 9
GOP Settings
M Frames: 4
N Frames: 12
Use Maximum Render Quality: [active]
Multiplexer: None
2) Why shouldn’t I use the “Match Sequence Settings” in exporting? Because of the big output file size?
I used it and the results are very good as I expected:
Download link: http://www.klavierlehrer-bayern.de/download/test_MatchSequenceSettings.mpeg
Export Settings
Match Sequence Settings [selected]
1920 x 1080, 25 fps, Upper, Quality 50
User Maximum Render Quality: [active]
3) I tried also Dynamic Link in PremierePro (to Encore).
The results are also poor.
4) I will test also LagarithLoslessCodec and frameserving +DGMPGDec. But the video is vertical long drawn-ot.
I think I did not use it correctly.
Regards

L7780 poor print quality after not using for 6 months

Poor print quality after not using my printer for about 6 months. Ran thru the tools (clean printhead, aligh, etc . . .) didn't help. Replaced all chartridges, still no help.
I'm fairly tech savy, been in IT for 27 years starting with hardware support.
Question, can I manually clean the printheads or should I just replace. I would rather try to clean them manually after just shelling out > $ 170 on new chartridges.
thanks
Brent

Hi @Brentl
Yes, you can clean the printhead and the inside of the printer. The following document will help; 'The Following Printheads are Missing or Damaged, Replace the Printhead' Message Displays on the All....
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Poor Photobooth quality after Maverick

Well hello community. After i installed Maverick from Mountain Lion i realized my macbooks built in camera went down in quality. I already tried to reinstall Maverick but it didn't work. how do i fix this?

Adam, I have the same issue. I recently got a new computer, downloaded iTunes 8 and moved all my songs over using my iPod. Songs play slow, skip slightly and just have poor sound quality. Music still sounds great on my iPod and on my old computer. I also followed Jason L's recommendations, without success. Hoping someone will have an answer.

After effects - slow motion

Hello!
I'm using AE cs3 and I'd like to edit my videos to look like this: http://uk.youtube.com/watch?v=t08IjRqK-UM
So I'm asking for help, if someone could tell me which options to click in AE to get this kind of slow motion effect. (I'm not really interested in other things just this slowmo at the moment)
Thanks in advance and bye...
[Thread moved by Forum Host]

The success of that effect is highly dependent on your footage. Use the TimeWarp effect:
i http://livedocs.adobe.com/en_US/AfterEffects/8.0/WS641C5190-1DAD-4150-B17F-F339C6DF1FB2.h tml
i http://livedocs.adobe.com/en_US/AfterEffects/8.0/WS3878526689cb91655866c1103906c6dea-7d4d .html
- Jonas Hummelstrand
http://generalspecialist.com/

QT: Poor video quality for gradients when Motion JPEG A/B codec used.

Hello,
I have a problem using the Quicktime (7.6) and the Motion JPEG A/B codec.
My workflow is as follows:
1. Create animation with Quartz Composer. This animation should use gradients from dark red to white.
2. Export the animation as Quicktime film (MOV), set full HD (1920x1080), duration e.g. 2 minutes.
3. Open exported MOV with Quicktime(Pro)
4. Export again to Quicktime film, now choose Motion JPEG A for codec, set quality to best.
5. Check the exported film. The gradient is not smooth, I see bright and dark lines. The quality of the gradient is poor.
I checked the other codecs. When I use "Animation" then the gradient is smooth and beauty.
Unfortunately I have to use Motion JPEG codec due to customer requirements.
Does anybody have an idea, how I can improve the quality? Maybe internal QT settings? Other external Motion JPEG codec ?
Thanks in advance
LeKarmar

Hello QuickTimeKirk,
Thank you for your reply.
I need Motion JPEG A/B or PhotoJPEG This is my "final distribution format" required by the customer.
I have problems not only with the red color. Even using grey, blue or yellow gradients produces bad output.
You're right. Animation codec produces what I will accept and want, but the files are huge sized and my customer doesn't accept this format.
Please note, that I already set the high quality playback setting in Quicktime.
Regards
LeKarmar
Message was edited by: LeKarmar

Poor jpeg quality after converting from pdf.

I am trying to make a book video out of a collection of pdf files in Premiere Elements 11. Apparently Premiere does not take pdfs so I converted the pdfs to jpegs via Photoshop CS5. When I try to run the video the quality of the images is horrible - very pixalated and some of the text is unreadable. Even though Photoshop psd files are said to be useable I get the same results. Rendering did nothing. Help?

ksreid
What are the pixel dimensions of your jpegs?
For now, I will assume 1920 x 1080 pixels.
In Premiere Elements 11 Expert workspace, go to File Menu/New/Project and Change Settings.
In the Change Settings area, change the project preset to:
NTSC
DSLR
1080p
DSLR [email protected]
After OK'ing the above, you will see the New Project dialog displaying your project preset.
Make sure that there is a check mark next to the option "Force Selected Project Setting on This Project" in the New Project dialog, and
then OK out of there.
Back in the Premiere Elements 11 Expert workspace, use Add Media/Files and Folders/ to get your source files
into Project Assets from where you drag the source files to the Timeline. Render the Timeline content and
determine if the quality of that content playback in the Edit area monitor is improved in comparison to your prior projects.
You might also explore applying fx Effects/Blur & Sharpen/Sharpen (just a little) to the Timeline content.
What is your intended export for your Timeline content?
Please review and consider and then let us know the outcome.
Thank you.
ATR

Poor sound quality after update on iPhone4 to iOS6

Any one with the same problem ?
After upgrading to iOS 6 on my iPhone 4, the sound quality during phone calls is very poor.
The other side is ok with listening.
The phone is not modified (unlocked and oth....)
Any advice is welcome !
Thanks !

Work in a professional studio and often use my itunes from my iphone 4gs to record sounds and samples. I have notice since the iso 6 update there is very poor quality sound coming from my phone now. It's seems the bit quality is very poor also the volume. I also noticed the songs are using way more power from the phone while playing.... Apple should really address these issues...a lot of loyal costumers, such as myself use Apple products in the music industry everyday. We have grown to expect certain standards and quality from Apple products and it seems you are taking steps backwards not forwards.

Poor image quality after DVD is burned.

Hi,
Project is fine in FCP and in iDVD before burn but when the burned dvd is played some of the images have lines or large pixels. The large pixels are very obvious in bright or white shots. Haven't had any other problems with the Mac for 4 years.
Any suggestions or solutions?
Thanks

Hi
a. Can it be so that Your movie is in PAL (25fps) and iDVD in NTSC (29.97fps)
No good way to do it - I use JES_Deinterlacer to convert
b. I do from FinalCut Pro 6
• Export out as a QuickTime .mov file
• Not selfcontained (not important but saves time and space)
• NO QUICKTIME CONVERSION - IMPORTANT !
This file I import into iDVD
Else read my list on DVD-Quality
1. iDVD 08 & 09 has three levels of qualities.
iDVD 6 has the two last ones
• Professional Quality (movies up to 120 min.) - BEST
• Best Performances (movies less than 60 min.) - High quality on final DVD
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) (movies up to 120 min.) - slightly lower quality than above
2.Video from
• FCE/P - Export out as full quality QuickTime.mov (not selfcontaining, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly eg x1 (in iDVD’08 or 09 this can also be set)
This can also be done with (Apple) Disk Util tool.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc).
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW)
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
8. Don’t burn more than three DVD at a time - but let the laser cool off for a while befor next batch.
iDVD quality also depends on.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx 25Gb.
less than 5Gb and Your result will most probably not play.
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JESDeinterlacer3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are plabacked by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choise before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
*unclemano wrote*
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
Yours Bengt W

Poor Video Quality After Export

I used Brightness & Contrast as well as Three-Way Color Corrector to edit. When I export, I lose almost all of the color quality. I have tried QuickTime, H.624, and a number of different Codecs and it always comes out the same. I have pushed the bit rate all the way up as well. I'm not sure what else to do

To better understand, when you saw poor quality, that is compared to what? The original clip?
Are you viewing both on the same monitor? If you remove the effects, does the quality look better?

Poor Printing quality after changing the catridges

After changing the complete set of catridge print quality is very bad and only prining in Magenta & Grey color.
regards,

Please read this post then provide some details. What printer model? What operating system? Are there any error messages on the printer or computer screen?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Poor audio quality after exporting to .MOV.

Voiceover in my video sounds crystal clear in the timeline but then thin and "rattley" after export when playing back with Quicktime player. Background music on other tracks always seems to be unaffected. Audio export set to AAC, 48 kHZ, Stereo. I must export to a Quicktime .mov format because it's the only file type that I can upload to YouTube without the color quality being distorted after upload. Adobe Updater says all of my programs are updated.
Any help would be greatly appreciated. Thanks!

How did you record the VO? is it a mono or stereo track, how are you viewing the export. Sometimes when just one section of the audio is wrong it is due to audio phase problems, I have not seen this with a vo before but it might be the issue. See:
Re: 1 of 2 audio tracks missing on certain browsers (h.264)

Poor Video Quality after Streaming

Dear all,
We have been provided with a number of .mpg files from a
client and we have streamed then into Flash, using the usual
settings. When streamed however, the resulting video is of a poorer
quality than the original file.
Just wondering if anyone had any ideas - we are probably
doing something wrong, but we've tried a number of various options
when importing.
Any advice greatly appreciated.
The videos produced may be seen at:
http://www.atomicwebsolutions.com/foodesign07test/reel.asp
Many thanks
Dave

Hi B,
We used - at encoding screen:
Profile - Custom
Video Codec - tried On2 and Spark
Quality - High
Frame Rate - Same as Source
Key Frame Placement - Automatic
We used similar settings for .WMV files in the past and the
video quality was fine, but with .MPG files, the resulting quality
is much less than the original.
Best wishes
Dave

Poor video quality after rendering or publishing iMovie video - Problem?

After completing production of an iMovie video and then publishing it, the video quality is absolutely horrible. Is the normal or am I doing something wrong?

I hope the iMovie programming team at Apple is READING THESE POSTS, plus the other threads complaining of the lousy quality that results when interlaced video (480i or 1080i) is imported into iMovie '09 (even with all the recent updates). Various folks and e-book authors have posted workarounds, but these are cumbersome and defeat the entire purpose of iMovie -- which should be a simple and elegant video editing solution. Millions of users have interlaced video which they would like to edit (for you novices, you're affected if your video was shot on mini-DV tapes, or the HDV format -- plua many other non-tape formats also use interlaced video, so check your camera's specs).
Apple, PLEASE ADDRESS THIS GLARING FLAW in iMovie '09. It's absurd that iMovie 6/HD, which worked flawlessly with DV and HDV footage, is no longer supported. IMovie '09 has many great features, but what value are they if the end-product looks bad?

Poor Firefox performance after applying recent Microsoft Updates (Win 7 x64); any solutions?

Recently I updated to Firefox 27 and noticed really horrible performance (Task Manager shows FF pegging one core, frequent "Firefox is not responding messages", even lagging keystrokes in the URL bar). This is on an Ideapad s205 (AMD E450 APU, Win 7 x64, 8GB RAM, SSD) that has always had pretty decent web browsing performance for a low-end machine.
Initially I blamed FF because the poor performance coincided with the update to version 27, but now I believe the root cause to be a recent Microsoft update. The reason for that is that my wife has a laptop with an even lower-end APU (C60 APU, 5400rpm hard drive, 4GB RAM, Win 7 x64), and she was getting much better performance with FF27 until I applied a backlog of some 90+ updates. Now she's suffering from the same poor performance I am and she's pretty p*ssed at me.
Interestingly, I have two WIn 7 x64 Intel desktops that also have FF 27 and are fully patched, and the performance is just fine. Perhaps this problem is specific to AMD APUs.
Any thoughts? I've tried turning off the Azure backend per some comments in this forum, but that made little or no difference.
Thanks!

Hi guigs2, I'm not sure what to expect for cache values. Mine are:
* browser.cache.disk.capacity;256000 (default)
* browser.cache.disk.smart_size.enabled;true (default)
* browser.cache.disk.smart_size_cached_value;358400 ("user set" but I think this was computed automatically)

Poor clip quality after applying slow motion or stabilization

Similar Messages

Maybe you are looking for