Poor export quality

So I've been editing a video recently in iMovie. When I import my HD video, it looks good, but when I edit and export it, it looks like crap. Why is this happening?

Hi
when I edit and export it
How ?
Onto What ? DVD ? YouTube ? ?
Yours Bengt W

Similar Messages

Poor export quality Aperture 3

I've been searching all over the internet and can't seem to find any answers in regards to export quality in Aperture 3. When I finish editing an image and I export it in either TIFF, JPEG or PNG all of them look the same regardless of if I change DPI, File size etc and none of them look even close to as detailed as the original. I'm exporting "version" and changing the options in presets with no luck.
Can someone help me? I can't accept the poor quality of the exported images as they make my portraits look fuzzy and not sharp (when they're very sharp and vivid in Aperture!). Is it possible to get the same quality in an exported image as I see in Aperture. It seems like it should be a no brainer!
Thank you!

I had the same problem. While in a One-to One the Creative told me to do this. What ever you are planning to export the file/files to have pluged in (flash drive, hard drive) or loaded (DVD/CD) before you start the process.
Chose the file or files by highlighting them then choose File - Export - Version. In the center of the window that will pop up there is a "Export Preset"" tab. He told me to choose TIFF- Original Size (8-bit). He did say that any higher than 8 bit is pointless. I did this and it worked great. I had a large beautiful file that I was blowing up to 30 by 20 and it looked so bad printed before I learned this trick. I printed it again after exporting the new way and it really looked great!
I hope this solves your problem, it was VERY frustrating for me also.

FCP 6: poor export quality in mp4

Hello, I have a Final Cut Pro 6 project, 90 minutes.
It is a multiclip project: 2 little minidv tapes of a live concert of my band.
I have done all the editing and I have just exported the project in mpeg4. This is not the first time, I have done this 4 or 5 times in the past and everything was OK. This time instead I have bad quality at every camera change: at every change, the image starts all pixelated, than after some frames, the quality is back to 100%.
It seems a key-frame issue... but I am not expert.
Here are the export setting:
- File Format: MP4
- Video Format: H.264
- Data Rate: 4500 Kbit/sec
- Image Size: 768 x 576 SD
- Frame Rate: Current
- Key Frame: Automatic
In The "Video Options" tab: Profile "Main" is the only checked, and encoding mode is "faster".
Again, I believe I have always used this settings, so I cannot understand what is the problem this time.
Thank you!

Thanks for your help.
I tried to use Compressor (never used it: I am quite new to video editing in FCP, I used iMovie).
The result is OK, I mean there are no big-pixel frames. I have just some questions for you: as you can see from the pic here:
http://img245.imageshack.us/img245/8593/fcp.jpg
- I choose constant bit rate, but I cannot set it higher than 2048. In FCP I could set the bit rate much higher (I used 3000 or even 4000 kbps).
- auto key frame is not allowed from what I see
- as regard the frame rate: is the frame rate of the FCP project the one I found in:
sequence menu -> settings -> editing time base ???
- last: in FCP I exported as mpeg4 with H264. Here from what I see, H264 are totally different codecs, isn't it?
Thank you

Poor export quality from imovie to idvd

Can someone help me. I have perfect photos with iphoto, transfer them to imovie (still clear), but when i finally send them to idvd and create my movie, all of my photos get digitalized. I've checked all 3 programs, and they all appear to be set at the highest quality. Is there a way to create a dvd with the same quality of photos that I have with my other programs?
Thanks, Brent

A few things to consider:
http://www.sjoki.uta.fi/~shmhav/SVCDon_aMacintosh.html#slideshow

Poor sound quality in timeline and export; fine in Source?

Hello all.
Newbie to Pr but experienced pro in digital audio. I'm stumped and know I'm just missing something somewhere.
I've made a music video for one of my songs. The graphics are all done (in AE), imported to Pr and eveything looks great. I import the final mix of the audio and it sounds very low quality when played from the timeline and in the final output, regardless of format (I've tried several presets and custom settings as well). I played around and noticed that the audio sounds fine when played from the Source window inside Premier.
The Pr session is comrised of 18 video tracks (not all playing at once, of course) and one stereo audio track.
I've tried re-exporting the audio from Logic at different bit depths, sample rates and file formats (mp3, wav, AAC, etc) but the results are the same every time: Source (Pr)sounds fine, Logic output sounds fine, rendered / timeline playback sounds like very low quality mp3 and final product sounds just as bad.
I've tried everything I can think of. I hope one of you can show me what I'm missing.
TIA!
Mark
Premier Pro CC
Processor 2 x 2.8 GHz Quad-Core Intel Xeon
Memory 8 GB 800 MHz DDR2 FB-DIMM
Graphics ATI Radeon HD 2600 XT 256 MB
Software OS X 10.9.1 (13B42)

Thank you for the reply!
I was experiencing the same results no matter what export settings I used. Plus the poor sound quality was present in the timeline itself, without even exporting the project.
I finally threw my hands up, started a completely new project, drug the same audio file in... sounded fine. Copied / Pasted the video clips from the original, broken project and boom, eveything is fixed. Yeah, corrupted Pr file it turns out. All I had to do was start a new project and import all the old components.
I've had to do this in Logic a lot (increasingly, these days). I just wish I'd tried it 10 hours earlier! Ha.
Anyway, problem solved, and thanks very much!

Using Premiere Pro CS3 When exporting as flash file poor picture quality

I'm using Premiere Pro CS3. I shoot green screen in HDV and work in 1440 x 1080. I have been capturing files in Premiere and sending them to Serious Magic Ulta 2. I use this program for keying and adding virtual backgrounds. I save these files as avi. with a resolution of 1440 X 1080. I then bring them back into Premiere Pro for final edit. When I export these video's encoded as mpeg2 theyplay very clear. I am now trying to export as flv. with alpha channel background and the resolution is poor. I working on the transparent background with walk on spokespersons that overlay the HTML page. When In try to play them on my computer the adobe media player is what comes up. I have downloaded flash player but it doesn't select it to play the video. I'm running windows Vista Business platform. What am I doing wrong.

Thanks for the reply.
The capture and editing have already been done in 1440 X 1080. Should I use this resolution rather than trying to bump it up to 1920 X 1080.
Thanks
Bill Bennett
Date: Fri, 2 Sep 2011 07:33:04 -0600
From: [email protected]
To: [email protected]
Subject: Using Premiere Pro CS3 When exporting as flash file poor picture quality
Computer playback generally prefers square pixels. Make sure to set your output resolution to 1920 x 1080 using a Pixel Aspect Ratio (PAR) of 1.0 or Square.
See if that helps.
>

Very poor video quality after transcoding in Adobe Encore CS5.1

MERRY CHRISTMAS AND A HAPPY NEW YEAR!
I have very poor video quality after transcoding the video file (MPEG) in Adobe Encore CS5.1. Below you see my used settings in my filmproject.
The problem exists after transcoding in Adobe Encore CS5.1. I checked all steps and found out that there is no problem until transcoding. My exported file in MPEG has very good video and audio quality.
Facts:
1. Camcorder: Panasonic AG-AC160AEJ
Operating System : Windows 7, 64 Bit, Ultimate edition
Source files: MTS files
Recording settings (clip settings):
Type: MPEG Movie
Image Size: 1920 x 1080
Frame Rate: 25,00
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Pixel Aspect Ratio: 1,0
2. Sequence settings in Premiere Pro
Sequence was created from Clip directly with settings above.
3. Exporting settings in Adobe Premiere Pro:
Match sequence settings was activated. Now other changes were set.
4. Exported File:
Video
Image Size: 1920 x 1080
Data Transfer Rate: 25920 kBit / s
Frame rate: 25
Audio:
Bit rate: 384 kBit / s
Channels: 2 (stereo)
Frequence: 48 kHz
5. Transcoding settings in Adobe Encore:
I used different transcoding settings such as automatic DVD Transcoding, CBR and VBR.I also set “use maximum render quality”. But all results were always the same: very poor quality.
Why does the encore transcoding cause such bad video quality?
How can I solve this problem?
Please help me soon.
Best regards.

Hi Ann,
1) I did not only „Automatic (based on source)“ options in my tests, but also many other customized options.
The results are very poor. I have done a new test with the following settings. The result is also poor:
Download link: http://www.klavierlehrer-bayern.de/download/test_mpeg2dvd_1.m2v
Export Settings:
Format: MPEG2-DVD
Preset: Custom
Codec: MainConcept MPEG Video, Quality: 5
Frame Rate: 25 fps
Field Order: Upper
Pixel Aspect Ratio: Automatic (based on source)
Render at Maximum Rate: [active]
Bitrate Encoding: VBR, 2 pass
Minimum Bitrate (Mbps): 5
Target Bitrate (Mbps): 9
Maximum Bitrate (Mbps): 9
GOP Settings
M Frames: 4
N Frames: 12
Use Maximum Render Quality: [active]
Multiplexer: None
2) Why shouldn’t I use the “Match Sequence Settings” in exporting? Because of the big output file size?
I used it and the results are very good as I expected:
Download link: http://www.klavierlehrer-bayern.de/download/test_MatchSequenceSettings.mpeg
Export Settings
Match Sequence Settings [selected]
1920 x 1080, 25 fps, Upper, Quality 50
User Maximum Render Quality: [active]
3) I tried also Dynamic Link in PremierePro (to Encore).
The results are also poor.
4) I will test also LagarithLoslessCodec and frameserving +DGMPGDec. But the video is vertical long drawn-ot.
I think I did not use it correctly.
Regards

Poor image quality save for web

It doesn't matter whether i'm exporting from Ai or Ps or whether it's CS6 or CC. I have changed the raster settings in Ai and i've also tried all optimization options with all different export file types (jpg, png, gif) at all different quality settings. It doesn't matter if I start with an ai, eps, pdf, png... the export result is always poor quality.
I have tried exporting at 300ppi and that does fix the quality issue and bloats the file size, but this way (the export route) is so time consuming since you have to resize your artwork each time as well as the artboard so that it doesn't cut off pixels. Save for web never used to have these quality issues and it also never used to cut off pixels around the edges. These workarounds prove very time consuming and produce file sizes that are not ideal.
When i first noticed this issue I was using Mavericks with CS6 and since am using Yosemite and Creative Cloud.
Steps to reproduce:
1. Create any bitmap or vector graphic in Ai or Ps, It doesn't matter whether you convert text to outlines or not
2. Save for web
3. View image in any application or browser to see poor quality and pixel trimming. Others running the same version and system are not having this issue, but I have checked many forums and found many others that do have this same issue but can't seem to find a solution.
Results:stair stepping, degradation, pixel trimming, general poor image quality
Expected results: Previously the save for web feature allowed for a decent quality image

First try the Cleaner. here's the link for CC but there exists one for Cs6 as well Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Everything I have read says that you kind of have to compromise file-size for quality. Could you post a screenshot of your settings?
also, if it helps: Creative Suite * Optimizing images

Poor image quality with save for web

It doesn't matter whether i'm exporting from Ai or Ps or whether it's CS6 or CC. I have changed the raster settings in Ai and i've also tried all optimization options with all different export file types (jpg, png, gif) at all different quality settings. It doesn't matter if I start with an ai, eps, pdf, png... the export result is always poor quality.
I have tried exporting at 300ppi and that does fix the quality issue and bloats the file size, but this way (the export route) is so time consuming since you have to resize your artwork each time as well as the artboard so that it doesn't cut off pixels. Save for web never used to have these quality issues and it also never used to cut off pixels around the edges. These workarounds prove very time consuming and produce file sizes that are not ideal.
When i first noticed this issue I was using Mavericks with CS6 and since am using Yosemite and Creative Cloud.
Steps to reproduce:
1. Create any bitmap or vector graphic in Ai or Ps, It doesn't matter whether you convert text to outlines or not
2. Save for web
3. View image in any application or browser to see poor quality and pixel trimming. Others running the same version and system are not having this issue, but I have checked many forums and found many others that do have this same issue but can't seem to find a solution.
Results:stair stepping, degradation, pixel trimming, general poor image quality
Expected results: Previously the save for web feature allowed for a decent quality image

I thought of that too so I tested on another machine with retina display and the file i saved on my machine looked bad on my machine and on the other comparable machine/display. So I sent them the original vector ai file and watched while they saved it the exact same way on their machine and the file looked fine on both of our machines/displays.
All of the settings they used appeared the same as what I used but with different results. I don't recall changing anything but does anyone know if there is some setting that could have been changed that is causing this issue?

Poor picture quality in crystal reports

Post Author: marina
CA Forum: .NET
Hello,
I need insert high-quality photos of some products to a crystal report dynamically and then export this report to a PDF file to be printed by the customer as some proposal of products.
Some time ago I developed a web-application using MS Visual Studio .NET 2003 and Crystal Reports for Visual Studio .NET 2003 to generate PDF reports. I added images to reports generating BLOB objects at runtime. But the customer complains on poor quality of images in exported reports. The images in the exported reports have a problem of lost smooth color gradation. Now Iu2019m investigating if Crystal Reports for Visual Studio .NET 2005 would help me.
So, now Iu2019m using MS Visual Studio .NET 2005 and Crystal Reports for Visual Studio .NET 2005 for a test and nevertheless I have the same problem with poor image quality in a total report and an exported PDF file. If I insert a photo file (e.g., TIF or PNG, RBG/8) to a report template, I see an original good-quality picture (RBG/8) on the template screen. I do not use any scaling in the test. If I just switch to the Preview tab to preview the report, I see a bad-quality picture instead. It has the same width and height but has lost smooth color gradation and looks like a 256-color picture. The option "Retain Original Image Color Depth" does not help. I have the same problem with image quality in an exported PDF or MS Word file.
Is it possible to manage total image quality in crystal reports and how?
Your prompt reply will be very much appreciated.

Post Author: marina
CA Forum: .NET
Hello,
Iu2019ve found how to solve this problem in Crystal Reports for MS VS.NET 2005. The option u201CRetain Original Image Color Depthu201D in the Report Options window helps u2013 the preview screen and the exported PDF file contain images of suitable good quality.
Iu2019ve found information on the u201CRetain Original Image Color Depthu201D option here: http://support.businessobjects.com/library/kbase/articles/c2016162.asp?ref=devzone_rss_net.
Unfortunately, I donu2019t have the full version of Crystal Reports 9 or 10 to check if this helps to solve image quality problem in the application on MS VS.NET 2003.
So, I try to edit source report templates in Crystal Reports for MS VS.NET 2005. I set the u201CRetain Original Image Color Depthu201D option in the Report Options window for them. Then I use these updated templates in my old application on MS VS.NET 2003 u2013 I donu2019t edit the templates there, I just load these updated templates at runtime. Dynamic images are added as BLOB objects to a data set at runtime to bind the reports. But I still have the same problem of lost color gradation in generated reports and exported PDF files. I also insert static images for a test to the report templates in MS VS.NET 2005 and then generate reports again by the application on MS VS.NET 2003. I have the same problem of lost color gradation for the static images too.
So, is it possible to use u201Coriginal image color depthu201D in an application written on MS VS.NET 2003? Or should I remake the project under MS VS.NET 2005 to retain original image color depth?
Your prompt reply will be very much appreciated.

Poor Picture Quality in iMovie Which USB Camcorder Will Work and Which Won'

Dear Colleagues,
I continue to read accounts by readers regarding iMovie 98 havinga poor image quality when sharing to iDVD. It has been suggested that users with non-High Definition camcorders, standard DV8 camcorders such as my Sony DCR-TRV315, are stretching the Movie to far when using the Large and Medium setting for sharing ing to iDVD and other media.
If this is the case, what pixel size should I use when sharing to iDVD. I had understood that 720X480 was the standard format for non-High Definition Digital 8 Camcorders. So what correct pixel ratio should I use for DVD playback on a wide-screen HDTV with non-HD recordings.
I am planning to purchase a Sony USB camcorder and I continue to hear reports that they and other brands of USB camcorders won't work with iMovie 08. Is this simply a new user not fully understanding how his new camcorder works?
If this is not the case, how can one determine which USB camcorders are compatible with iMovie 08?
Please get back to me soon.
Best regards,
Robert O. Cobb
aka The Clemmons Kid

A great deal has been said about im08 degrading interlaced video, to qualify the matter im08 resorts to progressive video depending on the capabilities of your mac, I for example can achieve full quality 1080i exports.
Additionally the matter has to be put into perspective. Of course a source video looks clearer on a mac if it is displayed in it's original interlaced format on a frame by frame basis, but this isn't how one would watch video. interlaced video looks dreadful on a computer monitor and needs to be de-interlaced to be watched, additionally you would never watch a video frame by frame and so comparing video in this way is somewhat pointless. There is a quality difference on some macs but if the video is compared in a realistic way the difference is quite small and often unnoticeable.
720 x 480 as you likely realise uses non square pixels which will be converted to square pixels for your AVC exports in im08, to maintain the aspect ratio of the pixels you should export to DV.
There are a list of supported cameras here, but of course there are many that are not in this list that do work. If you select a camera, post to see if anyone has had any compatibility issues, but as you seem to be aware a number of apparent issues are as a result of user errors rather than incompatibility.

Setting default export quality for PDFs in Pages 5.0

Hi,
Anyone know if it is possible to set a default export quality for PDFs in Pages 5.0. Even if it remembered the last used setting that would be helpful.
Thanks,
Nick

OK, I have managed to get higher quality images from the PDF renderer. Here is what I have found:
1) The PDF renderer in Reporting Services 2005 will size all images that it is given at 96 DPI no matter what DPI the image is when you pass it to the renderer. That means that a 300 DPI image or even a 600 DPI image will be sized in the PDF as if it is only 96 DPI. That means your high DPI image will render much larger than you expect.
So you might expect a 300 DPI image that is 6.5 inches wide to render properly at 1950 pixels. Yet, the PDF renderer will size it as it were 96 DPI which would make the image 20.3 inches long!
2) There is good news though. Despite sizing the images as if they were 96 DPI, the PDF renderer appears to render higher DPI images at a higher quality than 96 DPI. So despite the sizing being wrong, the image actually is rendering at a higher quality.
This means that you should size the image to the proper number of inches based on 96 DPI calculations. Then you can use Bitmap.SetResolution to set your images to at least 300 DPI. That should give you a higher quality image that is the proper number of pixels to fit properly in your report.
I am able to do all of this sizing dynamically because I am using objects as my data sources, but I am sure there are VB functions you could use in the report itself to accomplish the same task.
It is late, and I've been at this project all day long, so forgive me if I have explained anything poorly or gotten any concepts long. Yet, at this late hour, I believe this is what the renderer is doing.
I hope this helps someone else in the future, or at least points them in the right direction.

Export quality in After Effects

I'm using After Effects CS4 and have exported as an MPEG-4. The quality of the final movie is very poor. It looks like a low quality JPEG. In After Effects preview, it looks fine.
I'm familiar with exporting quality videos out of Premiere. Is the usual workflow to open AE projects in Premiere and use the options there to export? Or am I missing something in AE?

That may be, but I'm just not a fan. I did some tests a few years ago and decided that Animation
wasn't worth it and that it was in fact creating artifacts in my renders.
Just to show my work, I am pulling some info from wikipedia as a reference:
"For complex 3D rendered scenes or digitized film of real-world footage, it barely compresses at all and also can add visible noise."
Now I know, wikipedia isn't highly reliable, anyone can edit it, blah blah blah, but this statement runs congruent to my own findings. Add to that the weighty file size, and then the fact that this codec is officially my ENEMY because my students, who are instructed to use Sorenson 3, often forget to change the codec for their .mov renders, and so sometimes I get these bloated files that I have to trash and they have to re-render, and I just don't really care for this codec at all.
I just don't render video any more. Haven't for a long time now. So many advantages to using img sequences, I haven't looked back to big bloated video files.

Premiere Elements 11 - poor render quality?

I was reading a review of Premiere Elements 11, and it was noted that PE11 had limited render options which can result in poor quality output files:
"Rendering quality is limited to the original format, which is usually consumer-grade and heavily compressed, so adding an effect can degrade the video quality in the final rendered version when viewed at full size, especially in fast-moving scenes. Changing the preferences to slower/better quality helps, but does not eliminate this problem."
http://www.techhive.com/article/2010628/review-adobe-premiere-elements-11-offers-an-easy-f ast-and-simple-take-on-video-editing.html
Does anyone have any feedback on this? Are the rendering options limited?
I am currently downloading the trial to test it. I tried using the "Adobe Download Assistant" but the download speed was poor, so I had to switch to a scene release on a filehosting site instead (good one Adobe).
thanks

Another season, another review, and again far from the facts. This is only slightly better than the outright dubious ones by some weirdos in the previous releases!!
I have just downloaded the trial version and have done "rendering" and "export" and so I have no clue what he is talking about!! I tried an AVCHD clip and changed the opacity so that it requires rendering. I also added Guassian Blur to get it to need render (It used to be a Red line till PrE10, it is Yellowish now..). What I noticed was that the rendering happened very quickly and the rendered file was 1/2 the height and 1/2 the width. I find that verrrrry convenient, because when someone does rendering, it is because they want to have a quick look at how the composition looks like with their effects, titles, transitions, PiPs etc. It is done only to get an idea of what it looks like and is in no way related to how the exported output will look like. To get a preview of that this quickly is a good feature. Then I noticed an option in the preferences where they have given the option to change the render quality and hence speed back to the Full Quality - Slower Speed. but you know what? I don't think the reviewer is even looking at this.
What he means is the exported output. The ones under Publish/Share tab in PrE11. In my tests I find that the render quality has no impact on the exported quality. I exported it to a AVCHD-1920x1080-30p preset and I found it to be just as good as it was in PrE10. Same file size and same bit rate, just to confirm. "Rendering is limited to the original format.." What does he mean? If he meant export, I can again confidently say that you can export the same AVCHD file to NTSC DV Standard, WMV (WMV9), QuickTime (MOV wrapper) and multiple other formats. The export presets can be chosen immaterial of the input videos/timeline. If he means rendering (The one where you hit "Enter" on the timeline), the format is and has been "All-I-Frame-MPEG2" - that is Fixed.
I can assure you that the quality of finished output has and will depend on the combination of choice of the file (it's properties), the project setting (that is automatic - again!), the export preset resolution and frame rate (choose this as close as the original for best results) and the bit rate (higher is better - mostly). And this is no different from PrE10, 9, 8, 7, ..... The very fact that PrE has been giving the user options and control and at the same time makes it easy for novices over the years, is good enough reason for me to continuously go for it.

Poor Image Quality on Finished Project

I've seen similar questions before, but no responses. I put together a movie using still pictures, titles, and audio from iTunes using iMovie. I then export it to a .m4v format and import it into iDVD (the newest version). It looks perfect when I view it on my computer, but when I burn it (which works as it should), I get very poor image quality watching it on my TV. The images have red shadows that stretch and cover the faces. Some of the pictures are just more red than they should be, but others are just terrible. Even using the highest quality encoding, the problem persists. PLEASE HELP. Thank you.

Hi
a. make a DiskImage first and test this with Apple DVD-player.
(File menu and down "Make a DiskImage")
b. I only use streamingDV - no .m4v or like (may be it works - I don't know)
else
*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
iDVD pref file resides. Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named.
com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
• Program miss-match. iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match. iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match. iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
Last resort. from Craig. Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
If You do a re-install be sure to get rid of all iDVD old parts AND then EMPTY the Trash-basket !
Yours Bengt W

Poor export quality

Similar Messages

Maybe you are looking for