Poor font rendering

Hello,
an application, that loads a ttf font and uses
g2d.setRenderingHint(RenderingHints.KEY_TEXT_ANTIALIASING,
RenderingHints.VALUE_TEXT_ANTIALIAS_ON);
on all components that display text with this font worked well with jre 1.4 on WinXP.
Sometimes ago, I rebuilt it with jre 1.6 and due to customer complaints checked the rendering. I dramatically got worse compared to 1.4, where the rendering was fine (jre 1.6.0_03, Windows Vista). The quality of the text display is really poor. Is there a regression? And what's more: Is there a way to improve the rendering again. I already played with different renderigHints, but I could not notice any change.
Thank you,
Wolfgang

Is this problem reproducible with only this custom font?
E.g. system fonts like Tahoma look ok?
Copy your font to lib/fonts directory in the jre (or windows/fonts)
and run Font2DTest application from jfc/demo (part of every jdk).
Select your font and try different antialiasing modes - are they all looking bad?
Which one is similar to what you observe in your component?
Ideally, it will be nice if you can post minimal testcase to reproduce your problem
- e.g. draw line of text to BufferedImage and save it as png.
Post testcase and image. If possible - please post font file or provide link to it.

Similar Messages

Poor Font Rendering - Not very smooth!

My fonts are rendering poorly in Indesign even when viewing at 100% viewed as High Quality Display.
Am working on an iMac - Indesign CC. Trying to put a Resume together. Macs own program "Pages" actually seems to be rendering smoother fonts.
Would appreciate any advice

Thanks Jeffrey much appreciated. Had already got AA ticked in preferences...although it is better than when turned off Fonts and dotted lines still look somewhat pixelated compared to say text in "Pages" - Macs version of Word.
Cheers
Rob

Poor fonts rendering in XSun

Hello all,
I am relatively new to Solaris, I spent the last 15 years using
Irix and Linux, so I am not sure what to expect, but the
rendering of the fonts on my new workstation is horrible.
I am using GNOME 2, but it is as bad with with CDE.
The machine is a Sun Blade 150 with a 21" monitor and
here is the output of m64config -propt
--- OpenWindows Configuration for /dev/fbs/m640 ---
OWconfig: machine
Video Mode: 1280x1024x75
Depth: 24
For Linux there is an HOW TO that suggests ways to improve
the rendering of the fonts. Is there something like this for IRIX.
Please help me before I go blind!
Marcel

This sounds like an issue with your WM not being able to find the fonts it wants. I'm no expert here - actually fairly novice but :
- What WM environment are you trying to use ?
- Is the Font Server process running / enabled ?
I've had issues with Fluxbox on Solaris 9 that sounds real close to what you are describing and for me it was an issue with Fluxbox not knowing where the fonts where.

Windows OpenType CFF Font Rendering

We have a situation where our identity font is displaying terribly in MS Word 2010 on Windows 7. The font looks great in InDesign and Illustrator. The font family is OpenType with PostScript outlines, aka CFF. This behavior is consistent for any OpenType font from Adobe, such as Myriad Pro or Adobe Garamond.
I am nearly certain that the Windows font rendering engine is optimized for TrueType outlines and renders PostScript outlines poorly. I also think that Adobe is using a different rendering engine for the Creative Suite applications, perhaps their own. I have not been able to find any specific documentation of these statements.
Does this ring true? Does anyone know of specific documentation of poor font rendering in Windows applications, especially MS Office?

Argg! I knew it would be something stupid. I spent a lot of time recently trying to get all the exceptions worked out in font embedding and it is all starting to run together.
Yes, I use flate by default, but I used AsciiHex so I could examine the data easily. Now I'm wondering when this crept in and how much time I wasted. Maybe I don't want to know.
This fixes the display issue in Acrobat/Reader, but Apple Preview still won't display the font (it substitutions but gives no error). Does anyone know if Apple Preview even supports FontFile3/OpenType?
Confusingly, Acrobat's Preflight -> PDF Analysis -> "Report PDF syntax issues" still reports the "An unexpected value is associated with the key" error.
In this case, would extracting the CFF table as is from the OTF be a valid CFF font that could be used, thereby using FontFile3/Type1C and make it compatible with Apple Preview? Just thinking out loud.
I've updated the file http://www.pagestream.org/fonttest4.pdf to reflect the proper encoding for anyone who might have an inkling to take a look.
Thank you Leonard for your help!
Deron

Font rendering is poor after a hard reset

After a crash, I had to power off my MBP. Since it rebooted the font rendering has been poor. I have posted an image here to show you the difference. It is slight, but the font rendering used to be much more crisp. Now they appear too soft and blurred around the edges.
http://img.skitch.com/20100508-xmrup6hx2q3eqqqkj6rekhg6hc.png
Can anyone tell me what might have happened and how to fix it?
Thanks!
Mason

Looking at the image, it seems that your computer has changed its font smoothing setting.
You can alter this by going to System Preferences->Appearance and ticking the "Use LCD font smoothing when available" box.
It doesn't apply to running applications, so you need to quit and restart Safari to see the change.

Font rendering issue / Mountain Lion / non Apple LCD display

Hello
This font rendering issue or problem is probably well know by Apple crew too but nobody has solved it yet. Only poor solution are available such as try to adjust manually font rendering by writin some scripts concerning anti alias levels...they really dont solve the problem.
Could Apple bring us solution to this by developing or updating Mountain Lion?
So what is the problem: font rendering is very poor in Mountain Lion when using non Apple LCD. For example Fujitsu SL27T-1 LED (LCD displa) shows fonts very nice way in Windows but in Mac OS ML does not. Somebody told me that its about software vs. hardware rendering. Dont know about that but could you bring me the solution which is not advising me to buy Apple display (which is five times more expensive than other manufactures displays).
Br
M. Leino

just want to add that overall fonts look blurry and they are not very sharp.

[SOLVED]A nice sharp font renderer (not as sharp as windows)

Is there another font renderer out there? I tried freetype the default and that gives me blurry edges. Infinality is not better in my opinion. Same blurry edges too many configurations. Are there any other renderers out there?
Last edited by tedbell (2012-08-07 20:06:21)

here's ..profile.d/infinality-settings.sh:
### INFINALITY ENVIRONMENT VARIABLES FOR EXTRA RUN-TIME OPTIONS ##
# These environment variables require that their respective patches
# from http://www.infinality.net have been applied to the Freetype
# installation you are using. They will do abolutely
# nothing otherwise!
# This file should be copied to /etc/profile.d/ for system-wide
# effects and/or included in ~/.bashrc or ~/.bash_profile for per-user
# effects:
# . ~/path/to/this/file/infinality-settings.sh
# Of course, the per-user settings will override the system-wide
# settings. Default values indicated below will be used when the
# environment variables below are not defined.
# When I say "Default:" below, I'm referring to the default if no
# environment variables are set. Generally this ends up being
# whatever Freetype's default is set to.
# EXAMPLES
# Please see 3/4 down in this file for examples of different settings.
################## EXPLANATION OF SETTINGS ######################
# SET_XFT_SETTINGS
# Should the below Xft settings be set globally by this script? (true/false)
SET_XFT_SETTINGS=true
# XFT settings are like a red-headed stepchild that should be beaten severely.
# These only affect legacy programs, and *parts* of some modern programs like
# google-chrome. We only deal with these settings because we have to, otherwise
# crap will slip by. I recommend using hintslight and autohint as the defaults
# normally in local.conf. The reason hintfull and autohint:0 is needed here
# because otherwise some programs will occassionally request slight hinting for
# a truetype font. When a program does this, Freetype automatically uses the
# autohinter, when you may actually want it to be rendered with the TT hinter,
# (if specified in local.conf). So setting this to hintfull guarantees that the
# TT font will be rendered with the TT hinter (assuming it is specified in
# /etc/fonts/local.conf to be rendered that way.) For TT fonts that you want
# rendered with autohint, specifiying that in the /etc/fonts/local.conf
# should be enough. But you might think that by setting this to hintfull
# that it's going to use Freetype's full autohinting (which we *completely*
# avoid) for fonts you want autohinted. This is where
# INFINALITY_FT_AUTOFIT_FORCE_SLIGHT_HINTING comes in. It tells freetype to
# use slight hinting on fonts set for autohinting, even if the program requests
# full autohinting. Freetype's full hinting only looks OK under certain
# circumstances. The goal of infinality is to make infinality hinting look
# good all the time.
XFT_SETTINGS="
Xft.antialias: 1
Xft.autohint: 0
Xft.dpi: 96
Xft.hinting: 1
Xft.hintstyle: hintfull
Xft.lcdfilter: lcddefault
Xft.rgba: rgb
if [ "$SET_XFT_SETTINGS" = "true" ]; then
echo "$XFT_SETTINGS" | xrdb -merge > /dev/null 2>&1
fi
# INFINALITY_FT_FILTER_PARAMS
# This is a modified version of the patch here:
# http://levelsofdetail.kendeeter.com/2008/12/dynamic_fir_filter_patch.html
# Allows you to adjust the FIR filter at runtime instead of at
# compile time. The idea is to have values add up to 100, and be
# symmetrical around the middle value. If the values add up to
# more than 100, the glyphs will appear darker. If less than 100,
# lighter. I recommend using this method to make glyphs darker
# or lighter globally as opposed to using the gamma option (see note in
# the gamma option).
# Here are some samples of various filter parameters:
# (this has been changed to use integers between 0 and 100 to
# avoid problems with regional differences like comma for decimal point)
# Strong Extra Smooth "15 20 30 20 15" (extra smooth, natural weight)
# Extra Smooth "20 20 30 20 20" (extra smooth, extra weight)
# Smooth "15 20 32 20 15" (smooth, natural weight)
# Stronger Gibson "11 22 38 22 11" (smooth, extra weight)
# Gibson "11 22 33 22 11" (smooth, natural weight)
# Freetype Light "00 33 34 33 00" (sharp, natural weight) # freetype's "light" LCD filter
# Freetype Default "06 25 44 25 06" (sharp, extra weight) # freetype's default
# Extra Sharp "00 35 35 35 00" (extra sharp, extra weight) # freetype's "light" LCD filter on acid
# Windows uses something more sharp, maybe along the lines of Freetype's default
# Default if no ENV_VARS present: [Freetype's default]
# Recommended: "11 22 38 22 11" (too dark / smooth for some)
# Example 1: export INFINALITY_FT_FILTER_PARAMS="11 22 38 22 11"
export INFINALITY_FT_FILTER_PARAMS="11 22 38 22 11"
# INFINALITY_FT_STEM_ALIGNMENT_STRENGTH
# This performs analysis on each glyph and determines an amount
# to shift the glyph, left or right, so that it aligns better to
# pixel boundaries.
# This results in subtley cleaner looking stems, at the expense of
# proper distances between glyphs. This is only active for sizes
# 10 px or greater and does not apply to bold or italic fonts.
# There are also exceptions on a small number of fonts that I've
# not been able to render nicely with alignment enabled. In those
# cases, a forced translation is applied instead.
# Possible values:
# 0 through 100 - think of as percentage of strength
# 0 corresponds to no shifting whatsoever. In other words, OFF.
# 100 corresponds to a full move to a snap zone defined by
# the snapping algorithm, be it left or right. This
# is the full amount any glyph could be moved in order to make it
# align to the pixel.
# Values inbetween act as caps. If the algorithm determines that it
# wants to move the glyph .33 of a pixel to the left, but the value
# is set to 50 (i.e. 50%), then the maximum move that would be allowed
# is 50% of half a pixel, in other words .25. So instead of .33 the
# glyph is moved .25 of a pixel.
# For a subtle effect that doesn't dramatically affect the glyph, use
# 25 for this and 25 for INFINALITY_FT_STEM_FITTING_STRENGTH
# Default if no ENV_VARS present: 0
# Recommended if you want to use it: 100
export INFINALITY_FT_STEM_ALIGNMENT_STRENGTH=25
# INFINALITY_FT_STEM_FITTING_STRENGTH
# This performs analysis on each glyph and determines an amount
# to horizontally scale the glyph, so that stems align better to
# pixel boundaries. An emboldening (or anti-emboldening) is
# performed afterward to account for stem width exaggeration.
# This results in subtley cleaner looking fonts, at the expense of
# proper distances between glyphs and slightly misshapen glyphs.
# This is only active for sizes 10 px or greater and does not
# apply to bold or italic fonts.
# There are also exceptions on a small number of fonts that I've
# not been able to render nicely with fitting enabled. In those
# cases, a forced translation is applied instead.
# Possible values:
# 0 through 100 - think of as percentage of strength
# 0 corresponds to no stretching whatsoever. In other words, OFF.
# 100 corresponds to a full pixel stretch, be outward or inward. This
# is the full amount any glyph could be stretched in order to make it
# align to a pixel boundary. Which direction is chosen is part
# of the art of what I'm trying to do in the code. ;)
# Values inbetween act as caps. If the algorithm determines that it
# wants to stretch the glyph .75 of a pixel outward, but the value
# is set to 50 (i.e. 50%), then the maximum move that would be allowed
# is 50% of a pixel, in other words .50. So instead of .75 the
# glyph is stretched .50 of a pixel.
# For a subtle effect that doesn't dramatically affect the glyph, use
# 25 for this and 25 for INFINALITY_FT_STEM_FITTING_STRENGTH
# Default if no ENV_VARS present: 0
# Recommended if you want to use it: 100
export INFINALITY_FT_STEM_FITTING_STRENGTH=25
# INFINALITY_FT_STEM_SNAPPING_SLIDING_SCALE
# This allows you to set a ppem at which alignment and fitting
# will reach 100%. As glyphs become larger, more dramatic
# snapping will not affect the glyph shape as much, so it makes
# sense to allow this.
# For fonts that are 10 ppem, the values set above for
# INFINALITY_FT_STEM_ALIGNMENT_STRENGTH and
# INFINALITY_FT_STEM_FITTING_STRENGTH will be used. As the ppem
# gradually becomes larger, so will the strength settings, and
# they will reach 100% at the ppem you specify here.
# This is a simple linear scale.
# Possible values:
# 0 means to not use this feature
# 11 and up will set the 100% level to that ppem value
# Anything else is officially undefined, but I still bound it internally.
# Default if no ENV_VARS present: 0
export INFINALITY_FT_STEM_SNAPPING_SLIDING_SCALE=40
# INFINALITY_FT_USE_KNOWN_SETTINGS_ON_SELECTED_FONTS
# This applies largely to certain MS fonts, but some others as well.
# it will apply known good settings on a font-by-font basis, regardless
# of the other settings above or below.
# - Use known values for selected fonts & ppems that are known to look
# ok with 100:
# INFINALITY_FT_STEM_ALIGNMENT_STRENGTH
# INFINALITY_FT_STEM_FITTING_STRENGTH
# - Use various internal tweaks like compatible widths and other
# font-specific hacks.
# - Use gamma, brightness or contrast adjustments automatically
# on certain fonts. Global settings will still apply afterwards.
# - Enable various forced settings on selective fonts during
# rasterization and stem_alignment.
# If set to TRUE, this will use 100 regardless of the values you have
# specified above. It will not affect fonts that are not in this
# small list.
# Possible values:
# FALSE means to not use this feature
# TRUE will enable this feature
# Default if no ENV_VARS present: FALSE
# Recommended: TRUE
export INFINALITY_FT_USE_KNOWN_SETTINGS_ON_SELECTED_FONTS=true
# INFINALITY_FT_CHROMEOS_STYLE_SHARPENING_STRENGTH
# This enables an algorithm found in ChromeOS for sharpening the
# appearance of glyphs. It is based off this patch:
# http://codereview.chromium.org/3298011/diff/9001/media-libs/freetype/files/freetype-2.3.11-lcd-sharpen.patches
# It gives glyphs a more "grainy" look through some gamma
# correction. It does tend to thin out vertical stems, which
# may be a feature or a bug depending on your taste ;)
# Possible values:
# 0 through 100 - think of as percentage of strength
# 0 corresponds to no sharpening whatsoever. In other words, OFF.
# 25 is good for a subtle effect.
# 50 corresponds to the default ChromeOS value.
# 100 corresponds to maximum sharpening. This usually results in
# something undesirable looking.
# As you increase this amount, it is good to decrease the gamma (2nd value)
# of INFINALITY_FT_PSEUDO_GAMMA, and possibly increase
# INFINALITY_FT_STEM_FITTING_STRENGTH and
# INFINALITY_FT_STEM_ALIGNMENT_STRENGTH, as it seems like the algorithm
# lightens stems that aren't fully on-pixel.
# Default if no ENV_VARS present: 0
# Recommended: If you're going to use this filter - 50
export INFINALITY_FT_CHROMEOS_STYLE_SHARPENING_STRENGTH=0
# INFINALITY_FT_WINDOWS_STYLE_SHARPENING_STRENGTH
# This enables an algorithm developed with the intention to sharpen
# fonts to look similarly to Windows.
# It gives glyphs a more "grainy" look, like the ChromeOS filter
# except it does so more selectively. This prevents the thinning
# of vertical stems that is noticible when a blanket gamma filter
# like the ChromeOS filter is applied.
# I also get a "cleaner" impression from the fonts with this Windows
# style filter. This filter was done by 100% experimentation,
# and there things that could probably be improved.
# Some may argue that I shouldn't be trying to take the shortcomings
# of the MS approach and bring them here. I disagree, as part
# of freedom is having the right to make your fonts look as
# shitty as you'd like.
# Using this filter does somewhat lessen the need to use stem
# fitting and stem alignment, as glyphs appear sharper.
# This setting can be used at the same time as the previous chromeOS
# sharpening, and happens after it in the code.
# Possible values:
# 0 through 100 - think of as percentage of strength
# 0 corresponds to no sharpening whatsoever. In other words, OFF.
# 10-25 is good for a subtle effect while not completely decimating glyphs.
# 50-75 corresponds to probably something in the range that Windows uses.
# 100 corresponds to maximum sharpening.
# Using a high value for this variable along with enabling the
# fringe filter (below) almost eliminates the need
# for INFINALITY_FT_AUTOHINT_SNAP_STEM_HEIGHT to be set to 100,
# and can instead be set at 0. (Setting
# INFINALITY_FT_AUTOHINT_SNAP_STEM_HEIGHT to 0 prevents missing
# stems in the middle of s. The drawback is that many fonts just look
# way too sharp and grainy at this setting. Your call.)
# Default if no ENV_VARS present: 0
# Recommended if you want to use this filter: 65
export INFINALITY_FT_WINDOWS_STYLE_SHARPENING_STRENGTH=10
# INFINALITY_FT_AUTOHINT_SNAP_STEM_HEIGHT
# When using autohinting, horizontal stems you'd find in E, f, T, -,
# etc. are normally not snapped to full integer pixel heights, meaning
# that you will get a semi-dark fringe on these stems, above or
# below the black line of pixels:
# (- represents the semi-dark pixels)
# Setting this to 100 will force integer pixel heights. Setting it to
# zero will do what Freetype does by default. Anything inbetween will
# act as a weighted average of the two.
# This is disabled when the standard width is found (via voodoo) to be
# less than 1 pixel, in order to prevent the vanishing stem issues on
# letters with diagonal stems like a and s.
# Under most circumstances, this should be set at 100. If you choose to
# not set it to 100, you may want to set INFINALITY_FT_FRINGE_FILTER_STRENGTH
# to a non-zero value in order to reduce fringing.
# Possible values:
# 0 - default Freetype value
# 100 - a full pixel
# Default if no ENV_VARS present: 0
# Recommended: 100
export INFINALITY_FT_AUTOHINT_SNAP_STEM_HEIGHT=100
# INFINALITY_FT_USE_VARIOUS_TWEAKS
# - Force autohint when no TT instructions present.
# - Artificially embolden horizontally only.
# - When artificially emboldening, maintain the glyph width.
# - Embolden light and thin-stemmed glyphs automatically.
# - Don't sharpen italics.
# Some fonts look bad when stem aligned at certain ppems, no matter
# what. I've put exceptions in to deal with these, included in
# these tweaks. Georgia and Lucida Grande are examples.
# Possible values:
# true - enable tweaks
# false - do not enable tweaks (do Freetype default)
# Default if no ENV_VARS present: false
# Recommended: true
export INFINALITY_FT_USE_VARIOUS_TWEAKS=true
# INFINALITY_FT_GAMMA_CORRECTION
# This does a weighted gamma correction at the LCD filter phase
# PRIOR to the LCD filter. Unfortunately it does not however
# take into account the color on which the glyph is being rendered
# (or for that matter the color of the glyph),
# which would need to happen in X rendering. It is actually
# using the gamma function in calculations though.
# The first value indicates a px value, the second indicates a
# "gamma" value. All sizes less than the px value will be corrected
# on a weighted scale based on the second value.
# The gamma value is commonly between 0.0 and 3.0. Due to localization
# issues, the gamma value should be specified as it's actual value
# multiplied by 100. So a gamma of 1.3 would be 130. In practice,
# I'd stay between 40 and 250.
# Values 1 through 100 will darken the glyph
# Values greater than 100 will lighten the glyph
# Example 1: Darken glyphs that are less than 10 px. With some fonts
# even 5 or 6px is readable!
# export INFINALITY_FT_GAMMA_CORRECTION="10 60"
# Example 2: Lighten all glyphs (below 100px)
# export INFINALITY_FT_GAMMA_CORRECTION="100 150"
# Example 3: Do nothing
# export INFINALITY_FT_GAMMA_CORRECTION="0 100"
# Default: [No gamma correction]
export INFINALITY_FT_GAMMA_CORRECTION="0 100"
# INFINALITY_FT_BRIGHTNESS
# This filter adjusts brightness, using the standard algorithm
# for brightness. It is applied AFTER the LCD filtering.
# For a Windows XP look, set brightness to something and contrast to 50
# This will also tend to increase its sharpness.
# These values are relative and don't really mean anything
# however they are satisfactory for a range of appearances.
# Another tip is to use a gamma setting of "1000 110" or something
# over 100 to lighten things before processing.
# Default if no ENV_VARS present: 0
# Dark XP Experience: -25
# Light XP Experience: 40
# Example: export INFINALITY_FT_BRIGHTNESS="-20"
export INFINALITY_FT_BRIGHTNESS="0"
# INFINALITY_FT_CONTRAST
# This filter adjusts contrast, using the standard algorithm
# for contrast. It is applied AFTER the LCD filtering.
# For a Windows XP look, set brightness to -25 and contrast to 50
# This will also tend to increase its sharpness.
# These values are relative and don't really mean anything
# however they are satisfactory for a range of appearances.
# Another tip is to use a gamma setting of "1000 110" or something
# over 100 to lighten things before processing.
# Default if no ENV_VARS present: 0
# Dark or Light XP Experience: 50
# Example: export INFINALITY_FT_CONTRAST="50"
export INFINALITY_FT_CONTRAST="0"
# INFINALITY_FT_GRAYSCALE_FILTER_STRENGTH
# This filter adjusts subpixel-rendered glyphs toward grayscale.
# Sometimes this is useful in getting a rendering more like
# OSX.
# Range: Integers 0 through 100
# 0 represents no filtering
# 50 represents halfway between subpixel and grayscale
# 100 represents completely grayscale
# Default if no ENV_VARS present: 0
# Recommended, if you want to use it: 30
# Example: export INFINALITY_FT_GRAYSCALE_FILTER_STRENGTH="33"
export INFINALITY_FT_GRAYSCALE_FILTER_STRENGTH="0"
# INFINALITY_FT_FRINGE_FILTER_STRENGTH
# This filter tries to remove the horizontal fringing that is found on
# default autohinted glyphs (similar to OSX-rendered glyphs).
# For example, an E may be rendered so that the middle horizontal
# stem is 100% black, but also has a horizonal row of pixels above
# it that is at 50% intensity. This makes the glyph look dirty,
# however it is technically accurate.
# This would be useful in cases where you have
# INFINALITY_FT_AUTOHINT_SNAP_STEM_HEIGHT set to something less than 100
# but also can affect glyphs at 100, to some degree.
# Unless fonts are showing fringes in a way that annoys you, I recommend
# keeping it disabled, as it can slightly interfere with smooth appearance
# sometimes.
# Range: Integers 0 through 100
# 0 represents no filtering
# 50 represents a 50% reduction of detected fringes
# 100 represents completely removing detected fringes
# Default if no ENV_VARS present: 0
# Recommended, if you want to use it: 100
# Example: export INFINALITY_FT_FRINGE_FILTER_STRENGTH="100"
export INFINALITY_FT_FRINGE_FILTER_STRENGTH="0"
# INFINALITY_FT_AUTOHINT_HORIZONTAL_STEM_DARKEN_STRENGTH
# This post-filter darkens horizontal stems that autohint renders as semi-dark.
# Freetype will by default not force stems to render to pixel boundaries
# because it results in "vanishing stems". This happens on things like
# s S a and other glyphs with center diagonal stems.
# If you have INFINALITY_FT_AUTOHINT_SNAP_STEM_HEIGHT set to 100,
# you're telling it to force pixel boundaries, which can result in the
# vanishing stems. To get around this problem, I internally override the
# INFINALITY_FT_AUTOHINT_SNAP_STEM_HEIGHT setting if the stem width
# is less than a full pixel, regardless. This causes semi-dark stems, but
# at least there are stems there.
# This filter is intended to darken those semi-dark stems. I highly
# recommend using this, but setting to a low value like 10, because
# it is particularly sensitive right now, and can make thin fonts
# look weird otherwise.
# Range: Integers 0 through 100
# 0 represents no darkening
# 50 represents a 50% increase toward 1 pixel in height
# 100 represents a full pixel of height
# Default if no ENV_VARS present: 0
# Recommended, if you want to use it: 10
# Example: export INFINALITY_FT_AUTOHINT_HORIZONTAL_STEM_DARKEN_STRENGTH="10"
export INFINALITY_FT_AUTOHINT_HORIZONTAL_STEM_DARKEN_STRENGTH="10"
# INFINALITY_FT_AUTOHINT_VERTICAL_STEM_DARKEN_STRENGTH
# This post-filter darkens vertical stems less than 1 pixel that autohint
# renders as semi-dark. This applies mostly to thin fonts like
# Courier New, Raleway, and fonts with the word "Light" in the title or
# style. Although what autohint is doing is technically correct, it
# results in a bad looking rendering because it's too light, at small
# ppems. This filter tries to correct that.
# There is an aspect of this that is automatic, so it's safer to use
# larger values for this than the above horizontal ENV_VAR. However
# setting this higher has more impact on thinner fonts. So, I still
# recommend lower values.
# Range: Integers 0 through 100
# 0 represents no darkening
# 50 represents a 50% increase (from current strength) toward 1 pixel
# 100 represents a full pixel of width
# Default if no ENV_VARS present: 0
# Recommended, if you want to use it: 25
# Example: export INFINALITY_FT_AUTOHINT_VERTICAL_STEM_DARKEN_STRENGTH="25"
export INFINALITY_FT_AUTOHINT_VERTICAL_STEM_DARKEN_STRENGTH="25"
# INFINALITY_FT_AUTOHINT_INCREASE_GLYPH_HEIGHTS
# This will slightly stretch some glyphs vertically between 9px
# and 14px (inclusive). Some people may find this more
# aesthetically pleasing. This only applies to fonts that are
# using autohint. I used to recommend this to be set true, but
# it does mess with some (less popular) glyphs in a nasty way.
# The goal here is to increase the height of some fonts by 1 px
# but leave the x-height where it is. Arial is a good example
# of this working properly. Compare the heights of Arial, Times
# and Freesans with this on, vs. TT hinted versions of Arial and
# Times.
# Possible values:
# true - enable height adjustment
# false - do not enable height adjustment
# Default: false
export INFINALITY_FT_AUTOHINT_INCREASE_GLYPH_HEIGHTS=true
# Experimental emboldening values for OSX mode
export INFINALITY_FT_GLOBAL_EMBOLDEN_X_VALUE=0
export INFINALITY_FT_GLOBAL_EMBOLDEN_Y_VALUE=0
export INFINALITY_FT_BOLD_EMBOLDEN_X_VALUE=0
export INFINALITY_FT_BOLD_EMBOLDEN_Y_VALUE=0
########################### EXAMPLES ############################
# Set the USE_STYLE variable below to try each example.
# Make sure to set your style in /etc/fonts/local.conf too.
# Possible options:
# DEFAULT - Use above settings. A compromise that should please most people.
# OSX - Simulate OSX rendering
# UBUNTU - Simulate UBUNTU rendering
# LINUX - Generic "Linux" style - no snapping or certain other tweaks
# WINDOWS - Simulate Windows rendering
# WINDOWS7 - Simulate Windows rendering with normal glyphs
# WINDOWS7LIGHT- Simulate Windows 7 rendering with lighter glyphs
# WINDOWS - Simulate Windows rendering
# VANILLA - Just subpixel hinting
# CUSTOM - Your own choice. See below
# ----- Infinality styles -----
# CLASSIC - Infinality rendering circa 2010. No snapping.
# NUDGE - CLASSIC with lightly stem snapping and tweaks
# PUSH - CLASSIC with medium stem snapping and tweaks
# SHOVE - Full stem snapping and tweaks without sharpening
# SHARPENED - Full stem snapping, tweaks, and Windows-style sharpening
# INFINALITY - Settings I use
# DISABLED - Act as though running without the extra infinality enhancements (just subpixel hinting).
USE_STYLE="LINUX"
### NEEDS WORK ###
################# OSX STYLE #################
if [ "$USE_STYLE" = "OSX" ]; then
export INFINALITY_FT_FILTER_PARAMS="03 32 38 32 03"
export INFINALITY_FT_GRAYSCALE_FILTER_STRENGTH=25
export INFINALITY_FT_FRINGE_FILTER_STRENGTH=0
export INFINALITY_FT_AUTOHINT_HORIZONTAL_STEM_DARKEN_STRENGTH=10
export INFINALITY_FT_AUTOHINT_VERTICAL_STEM_DARKEN_STRENGTH=25
export INFINALITY_FT_WINDOWS_STYLE_SHARPENING_STRENGTH=0
export INFINALITY_FT_CHROMEOS_STYLE_SHARPENING_STRENGTH=0
export INFINALITY_FT_STEM_ALIGNMENT_STRENGTH=0
export INFINALITY_FT_STEM_FITTING_STRENGTH=0
export INFINALITY_FT_GAMMA_CORRECTION="1000 80"
export INFINALITY_FT_BRIGHTNESS="10"
export INFINALITY_FT_CONTRAST="20"
export INFINALITY_FT_USE_VARIOUS_TWEAKS=false
export INFINALITY_FT_AUTOHINT_INCREASE_GLYPH_HEIGHTS=false
export INFINALITY_FT_AUTOHINT_SNAP_STEM_HEIGHT=0
export INFINALITY_FT_STEM_SNAPPING_SLIDING_SCALE=0
export INFINALITY_FT_USE_KNOWN_SETTINGS_ON_SELECTED_FONTS=false
export INFINALITY_FT_GLOBAL_EMBOLDEN_X_VALUE=0
export INFINALITY_FT_GLOBAL_EMBOLDEN_Y_VALUE=8
export INFINALITY_FT_BOLD_EMBOLDEN_X_VALUE=16
export INFINALITY_FT_BOLD_EMBOLDEN_Y_VALUE=0
fi
################# UBUNTU STYLE #################
if [ "$USE_STYLE" = "UBUNTU" ]; then
export INFINALITY_FT_FILTER_PARAMS="11 22 38 22 11"
export INFINALITY_FT_GRAYSCALE_FILTER_STRENGTH=0
export INFINALITY_FT_FRINGE_FILTER_STRENGTH=0
export INFINALITY_FT_AUTOHINT_HORIZONTAL_STEM_DARKEN_STRENGTH=10
export INFINALITY_FT_AUTOHINT_VERTICAL_STEM_DARKEN_STRENGTH=25
export INFINALITY_FT_WINDOWS_STYLE_SHARPENING_STRENGTH=0
export INFINALITY_FT_CHROMEOS_STYLE_SHARPENING_STRENGTH=0
export INFINALITY_FT_STEM_ALIGNMENT_STRENGTH=0
export INFINALITY_FT_STEM_FITTING_STRENGTH=0
export INFINALITY_FT_GAMMA_CORRECTION="1000 80"
export INFINALITY_FT_BRIGHTNESS="-10"
export INFINALITY_FT_CONTRAST="15"
export INFINALITY_FT_USE_VARIOUS_TWEAKS=true
export INFINALITY_FT_AUTOHINT_INCREASE_GLYPH_HEIGHTS=false
export INFINALITY_FT_AUTOHINT_SNAP_STEM_HEIGHT=0
export INFINALITY_FT_STEM_SNAPPING_SLIDING_SCALE=0
export INFINALITY_FT_USE_KNOWN_SETTINGS_ON_SELECTED_FONTS=false
fi
################# LINUX STYLE #################
if [ "$USE_STYLE" = "LINUX" ]; then
export INFINALITY_FT_FILTER_PARAMS="06 25 44 25 06"
export INFINALITY_FT_GRAYSCALE_FILTER_STRENGTH=0
export INFINALITY_FT_FRINGE_FILTER_STRENGTH=0
export INFINALITY_FT_AUTOHINT_HORIZONTAL_STEM_DARKEN_STRENGTH=0
export INFINALITY_FT_AUTOHINT_VERTICAL_STEM_DARKEN_STRENGTH=0
export INFINALITY_FT_WINDOWS_STYLE_SHARPENING_STRENGTH=0
export INFINALITY_FT_CHROMEOS_STYLE_SHARPENING_STRENGTH=25
export INFINALITY_FT_STEM_ALIGNMENT_STRENGTH=0
export INFINALITY_FT_STEM_FITTING_STRENGTH=0
export INFINALITY_FT_GAMMA_CORRECTION="0 100"
export INFINALITY_FT_BRIGHTNESS="10"
export INFINALITY_FT_CONTRAST="50"
export INFINALITY_FT_USE_VARIOUS_TWEAKS=true
export INFINALITY_FT_AUTOHINT_INCREASE_GLYPH_HEIGHTS=false
export INFINALITY_FT_AUTOHINT_SNAP_STEM_HEIGHT=100
export INFINALITY_FT_STEM_SNAPPING_SLIDING_SCALE=0
export INFINALITY_FT_USE_KNOWN_SETTINGS_ON_SELECTED_FONTS=false
fi
################# WINDOWS XP STYLE LIGHT #################
if [ "$USE_STYLE" = "WINDOWSXPLIGHT" ]; then
export INFINALITY_FT_FILTER_PARAMS="06 25 44 25 06"
export INFINALITY_FT_GRAYSCALE_FILTER_STRENGTH=0
export INFINALITY_FT_FRINGE_FILTER_STRENGTH=100
export INFINALITY_FT_AUTOHINT_HORIZONTAL_STEM_DARKEN_STRENGTH=10
export INFINALITY_FT_AUTOHINT_VERTICAL_STEM_DARKEN_STRENGTH=25
export INFINALITY_FT_WINDOWS_STYLE_SHARPENING_STRENGTH=65
export INFINALITY_FT_CHROMEOS_STYLE_SHARPENING_STRENGTH=0
export INFINALITY_FT_STEM_ALIGNMENT_STRENGTH=15
export INFINALITY_FT_STEM_FITTING_STRENGTH=15
export INFINALITY_FT_GAMMA_CORRECTION="1000 120"
export INFINALITY_FT_BRIGHTNESS="20"
export INFINALITY_FT_CONTRAST="30"
export INFINALITY_FT_USE_VARIOUS_TWEAKS=true
export INFINALITY_FT_AUTOHINT_INCREASE_GLYPH_HEIGHTS=false
export INFINALITY_FT_AUTOHINT_SNAP_STEM_HEIGHT=100
export INFINALITY_FT_STEM_SNAPPING_SLIDING_SCALE=30
export INFINALITY_FT_USE_KNOWN_SETTINGS_ON_SELECTED_FONTS=true
fi
################# WINDOWS 7 STYLE LIGHT #################
if [ "$USE_STYLE" = "WINDOWS7LIGHT" ]; then
export INFINALITY_FT_FILTER_PARAMS="20 25 38 25 05"
export INFINALITY_FT_GRAYSCALE_FILTER_STRENGTH=0
export INFINALITY_FT_FRINGE_FILTER_STRENGTH=100
export INFINALITY_FT_AUTOHINT_HORIZONTAL_STEM_DARKEN_STRENGTH=10
export INFINALITY_FT_AUTOHINT_VERTICAL_STEM_DARKEN_STRENGTH=25
export INFINALITY_FT_WINDOWS_STYLE_SHARPENING_STRENGTH=100
export INFINALITY_FT_CHROMEOS_STYLE_SHARPENING_STRENGTH=0
export INFINALITY_FT_STEM_ALIGNMENT_STRENGTH=0
export INFINALITY_FT_STEM_FITTING_STRENGTH=0
export INFINALITY_FT_GAMMA_CORRECTION="1000 160"
export INFINALITY_FT_BRIGHTNESS="0"
export INFINALITY_FT_CONTRAST="20"
export INFINALITY_FT_USE_VARIOUS_TWEAKS=true
export INFINALITY_FT_AUTOHINT_INCREASE_GLYPH_HEIGHTS=false
export INFINALITY_FT_AUTOHINT_SNAP_STEM_HEIGHT=100
export INFINALITY_FT_STEM_SNAPPING_SLIDING_SCALE=30
export INFINALITY_FT_USE_KNOWN_SETTINGS_ON_SELECTED_FONTS=true
fi
################# WINDOWS XP STYLE #################
if [ "$USE_STYLE" = "WINDOWSXP" ]; then
export INFINALITY_FT_FILTER_PARAMS="06 25 44 25 06"
export INFINALITY_FT_GRAYSCALE_FILTER_STRENGTH=0
export INFINALITY_FT_FRINGE_FILTER_STRENGTH=100
export INFINALITY_FT_AUTOHINT_HORIZONTAL_STEM_DARKEN_STRENGTH=10
export INFINALITY_FT_AUTOHINT_VERTICAL_STEM_DARKEN_STRENGTH=25
export INFINALITY_FT_WINDOWS_STYLE_SHARPENING_STRENGTH=65
export INFINALITY_FT_CHROMEOS_STYLE_SHARPENING_STRENGTH=0
export INFINALITY_FT_STEM_ALIGNMENT_STRENGTH=15
export INFINALITY_FT_STEM_FITTING_STRENGTH=15
export INFINALITY_FT_GAMMA_CORRECTION="1000 120"
export INFINALITY_FT_BRIGHTNESS="10"
export INFINALITY_FT_CONTRAST="20"
export INFINALITY_FT_USE_VARIOUS_TWEAKS=true
export INFINALITY_FT_AUTOHINT_INCREASE_GLYPH_HEIGHTS=false
export INFINALITY_FT_AUTOHINT_SNAP_STEM_HEIGHT=100
export INFINALITY_FT_STEM_SNAPPING_SLIDING_SCALE=30
export INFINALITY_FT_USE_KNOWN_SETTINGS_ON_SELECTED_FONTS=true
fi
################# WINDOWS 7 STYLE #################
if [ "$USE_STYLE" = "WINDOWS7" ]; then
export INFINALITY_FT_FILTER_PARAMS="20 25 42 25 06"
export INFINALITY_FT_GRAYSCALE_FILTER_STRENGTH=0
export INFINALITY_FT_FRINGE_FILTER_STRENGTH=100
export INFINALITY_FT_AUTOHINT_HORIZONTAL_STEM_DARKEN_STRENGTH=10
export INFINALITY_FT_AUTOHINT_VERTICAL_STEM_DARKEN_STRENGTH=25
export INFINALITY_FT_WINDOWS_STYLE_SHARPENING_STRENGTH=65
export INFINALITY_FT_CHROMEOS_STYLE_SHARPENING_STRENGTH=0
export INFINALITY_FT_STEM_ALIGNMENT_STRENGTH=0
export INFINALITY_FT_STEM_FITTING_STRENGTH=0
export INFINALITY_FT_GAMMA_CORRECTION="1000 120"
export INFINALITY_FT_BRIGHTNESS="10"
export INFINALITY_FT_CONTRAST="20"
export INFINALITY_FT_USE_VARIOUS_TWEAKS=true
export INFINALITY_FT_AUTOHINT_INCREASE_GLYPH_HEIGHTS=false
export INFINALITY_FT_AUTOHINT_SNAP_STEM_HEIGHT=100
export INFINALITY_FT_STEM_SNAPPING_SLIDING_SCALE=0
export INFINALITY_FT_USE_KNOWN_SETTINGS_ON_SELECTED_FONTS=true
fi
############### VANILLA STYLE ##############
if [ "$USE_STYLE" = "VANILLA" ]; then
export INFINALITY_FT_FILTER_PARAMS="06 25 38 25 06"
export INFINALITY_FT_GRAYSCALE_FILTER_STRENGTH=0
export INFINALITY_FT_FRINGE_FILTER_STRENGTH=0
export INFINALITY_FT_AUTOHINT_HORIZONTAL_STEM_DARKEN_STRENGTH=0
export INFINALITY_FT_AUTOHINT_VERTICAL_STEM_DARKEN_STRENGTH=0
export INFINALITY_FT_WINDOWS_STYLE_SHARPENING_STRENGTH=0
export INFINALITY_FT_CHROMEOS_STYLE_SHARPENING_STRENGTH=0
export INFINALITY_FT_STEM_ALIGNMENT_STRENGTH=0
export INFINALITY_FT_STEM_FITTING_STRENGTH=0
export INFINALITY_FT_GAMMA_CORRECTION="0 100"
export INFINALITY_FT_BRIGHTNESS="0"
export INFINALITY_FT_CONTRAST="0"
export INFINALITY_FT_USE_VARIOUS_TWEAKS=false
export INFINALITY_FT_AUTOHINT_INCREASE_GLYPH_HEIGHTS=false
export INFINALITY_FT_AUTOHINT_SNAP_STEM_HEIGHT=0
export INFINALITY_FT_STEM_SNAPPING_SLIDING_SCALE=0
export INFINALITY_FT_USE_KNOWN_SETTINGS_ON_SELECTED_FONTS=false
fi
############### CLASSIC INFINALITY STYLE ##############
if [ "$USE_STYLE" = "CLASSIC" ]; then
export INFINALITY_FT_FILTER_PARAMS="06 25 38 25 06"
export INFINALITY_FT_GRAYSCALE_FILTER_STRENGTH=0
export INFINALITY_FT_FRINGE_FILTER_STRENGTH=0
export INFINALITY_FT_AUTOHINT_HORIZONTAL_STEM_DARKEN_STRENGTH=0
export INFINALITY_FT_AUTOHINT_VERTICAL_STEM_DARKEN_STRENGTH=0
export INFINALITY_FT_WINDOWS_STYLE_SHARPENING_STRENGTH=0
export INFINALITY_FT_CHROMEOS_STYLE_SHARPENING_STRENGTH=0
export INFINALITY_FT_STEM_ALIGNMENT_STRENGTH=0
export INFINALITY_FT_STEM_FITTING_STRENGTH=0
export INFINALITY_FT_GAMMA_CORRECTION="0 100"
export INFINALITY_FT_BRIGHTNESS="0"
export INFINALITY_FT_CONTRAST="0"
export INFINALITY_FT_USE_VARIOUS_TWEAKS=true
export INFINALITY_FT_AUTOHINT_INCREASE_GLYPH_HEIGHTS=true
export INFINALITY_FT_AUTOHINT_SNAP_STEM_HEIGHT=100
export INFINALITY_FT_STEM_SNAPPING_SLIDING_SCALE=0
export INFINALITY_FT_USE_KNOWN_SETTINGS_ON_SELECTED_FONTS=false
fi
################# NUDGE STYLE #################
if [ "$USE_STYLE" = "NUDGE" ]; then
export INFINALITY_FT_FILTER_PARAMS="11 22 38 22 11"
export INFINALITY_FT_GRAYSCALE_FILTER_STRENGTH=0
export INFINALITY_FT_FRINGE_FILTER_STRENGTH=0
export INFINALITY_FT_AUTOHINT_HORIZONTAL_STEM_DARKEN_STRENGTH=10
export INFINALITY_FT_AUTOHINT_VERTICAL_STEM_DARKEN_STRENGTH=25
export INFINALITY_FT_WINDOWS_STYLE_SHARPENING_STRENGTH=0
export INFINALITY_FT_CHROMEOS_STYLE_SHARPENING_STRENGTH=0
export INFINALITY_FT_STEM_ALIGNMENT_STRENGTH=25
export INFINALITY_FT_STEM_FITTING_STRENGTH=15
export INFINALITY_FT_GAMMA_CORRECTION="0 100"
export INFINALITY_FT_BRIGHTNESS="0"
export INFINALITY_FT_CONTRAST="0"
export INFINALITY_FT_USE_VARIOUS_TWEAKS=true
export INFINALITY_FT_AUTOHINT_INCREASE_GLYPH_HEIGHTS=true
export INFINALITY_FT_AUTOHINT_SNAP_STEM_HEIGHT=100
export INFINALITY_FT_STEM_SNAPPING_SLIDING_SCALE=30
export INFINALITY_FT_USE_KNOWN_SETTINGS_ON_SELECTED_FONTS=false
fi
################# PUSH STYLE #################
if [ "$USE_STYLE" = "PUSH" ]; then
export INFINALITY_FT_FILTER_PARAMS="11 22 38 22 11"
export INFINALITY_FT_GRAYSCALE_FILTER_STRENGTH=0
export INFINALITY_FT_FRINGE_FILTER_STRENGTH=0
export INFINALITY_FT_AUTOHINT_HORIZONTAL_STEM_DARKEN_STRENGTH=10
export INFINALITY_FT_AUTOHINT_VERTICAL_STEM_DARKEN_STRENGTH=25
export INFINALITY_FT_WINDOWS_STYLE_SHARPENING_STRENGTH=0
export INFINALITY_FT_CHROMEOS_STYLE_SHARPENING_STRENGTH=0
export INFINALITY_FT_STEM_ALIGNMENT_STRENGTH=75
export INFINALITY_FT_STEM_FITTING_STRENGTH=50
export INFINALITY_FT_GAMMA_CORRECTION="0 100"
export INFINALITY_FT_BRIGHTNESS="0"
export INFINALITY_FT_CONTRAST="0"
export INFINALITY_FT_USE_VARIOUS_TWEAKS=true
export INFINALITY_FT_AUTOHINT_INCREASE_GLYPH_HEIGHTS=true
export INFINALITY_FT_AUTOHINT_SNAP_STEM_HEIGHT=100
export INFINALITY_FT_STEM_SNAPPING_SLIDING_SCALE=30
export INFINALITY_FT_USE_KNOWN_SETTINGS_ON_SELECTED_FONTS=true
fi
################# INFINALITY STYLE #################
if [ "$USE_STYLE" = "INFINALITY" ]; then
export INFINALITY_FT_FILTER_PARAMS="11 22 38 22 11"
export INFINALITY_FT_GRAYSCALE_FILTER_STRENGTH=0
export INFINALITY_FT_FRINGE_FILTER_STRENGTH=0
export INFINALITY_FT_AUTOHINT_HORIZONTAL_STEM_DARKEN_STRENGTH=10
export INFINALITY_FT_AUTOHINT_VERTICAL_STEM_DARKEN_STRENGTH=25
export INFINALITY_FT_WINDOWS_STYLE_SHARPENING_STRENGTH=5
export INFINALITY_FT_CHROMEOS_STYLE_SHARPENING_STRENGTH=0
export INFINALITY_FT_STEM_ALIGNMENT_STRENGTH=25
export INFINALITY_FT_STEM_FITTING_STRENGTH=25
export INFINALITY_FT_GAMMA_CORRECTION="0 100"
export INFINALITY_FT_BRIGHTNESS="0"
export INFINALITY_FT_CONTRAST="0"
export INFINALITY_FT_USE_VARIOUS_TWEAKS=true
export INFINALITY_FT_AUTOHINT_INCREASE_GLYPH_HEIGHTS=true
export INFINALITY_FT_AUTOHINT_SNAP_STEM_HEIGHT=100
export INFINALITY_FT_STEM_SNAPPING_SLIDING_SCALE=40
export INFINALITY_FT_USE_KNOWN_SETTINGS_ON_SELECTED_FONTS=true
fi
################# SHOVE STYLE #################
if [ "$USE_STYLE" = "SHOVE" ]; then
export INFINALITY_FT_FILTER_PARAMS="11 22 38 22 11"
export INFINALITY_FT_GRAYSCALE_FILTER_STRENGTH=0
export INFINALITY_FT_FRINGE_FILTER_STRENGTH=0
export INFINALITY_FT_AUTOHINT_HORIZONTAL_STEM_DARKEN_STRENGTH=10
export INFINALITY_FT_AUTOHINT_VERTICAL_STEM_DARKEN_STRENGTH=25
export INFINALITY_FT_WINDOWS_STYLE_SHARPENING_STRENGTH=0
export INFINALITY_FT_CHROMEOS_STYLE_SHARPENING_STRENGTH=0
export INFINALITY_FT_STEM_ALIGNMENT_STRENGTH=100
export INFINALITY_FT_STEM_FITTING_STRENGTH=100
export INFINALITY_FT_GAMMA_CORRECTION="0 100"
export INFINALITY_FT_BRIGHTNESS="0"
export INFINALITY_FT_CONTRAST="0"
export INFINALITY_FT_USE_VARIOUS_TWEAKS=true
export INFINALITY_FT_AUTOHINT_INCREASE_GLYPH_HEIGHTS=true
export INFINALITY_FT_AUTOHINT_SNAP_STEM_HEIGHT=100
export INFINALITY_FT_STEM_SNAPPING_SLIDING_SCALE=0
export INFINALITY_FT_USE_KNOWN_SETTINGS_ON_SELECTED_FONTS=true
fi
################# SHARPENED INFINALITY STYLE #################
if [ "$USE_STYLE" = "SHARPENED" ]; then
export INFINALITY_FT_FILTER_PARAMS="11 22 38 22 11"
export INFINALITY_FT_GRAYSCALE_FILTER_STRENGTH=0
export INFINALITY_FT_FRINGE_FILTER_STRENGTH=0
export INFINALITY_FT_AUTOHINT_HORIZONTAL_STEM_DARKEN_STRENGTH=10
export INFINALITY_FT_AUTOHINT_VERTICAL_STEM_DARKEN_STRENGTH=25
export INFINALITY_FT_WINDOWS_STYLE_SHARPENING_STRENGTH=65
export INFINALITY_FT_CHROMEOS_STYLE_SHARPENING_STRENGTH=0
export INFINALITY_FT_STEM_ALIGNMENT_STRENGTH=25
export INFINALITY_FT_STEM_FITTING_STRENGTH=25
export INFINALITY_FT_GAMMA_CORRECTION="0 100"
export INFINALITY_FT_BRIGHTNESS="0"
export INFINALITY_FT_CONTRAST="0"
export INFINALITY_FT_USE_VARIOUS_TWEAKS=true
export INFINALITY_FT_AUTOHINT_INCREASE_GLYPH_HEIGHTS=true
export INFINALITY_FT_AUTOHINT_SNAP_STEM_HEIGHT=100
export INFINALITY_FT_STEM_SNAPPING_SLIDING_SCALE=40
export INFINALITY_FT_USE_KNOWN_SETTINGS_ON_SELECTED_FONTS=true
fi
################# DISABLED STYLE #################
if [ "$USE_STYLE" = "DISABLED" ]; then
export INFINALITY_FT_FILTER_PARAMS=
export INFINALITY_FT_GRAYSCALE_FILTER_STRENGTH=
export INFINALITY_FT_FRINGE_FILTER_STRENGTH=
export INFINALITY_FT_AUTOHINT_HORIZONTAL_STEM_DARKEN_STRENGTH=
export INFINALITY_FT_AUTOHINT_VERTICAL_STEM_DARKEN_STRENGTH=
export INFINALITY_FT_WINDOWS_STYLE_SHARPENING_STRENGTH=
export INFINALITY_FT_CHROMEOS_STYLE_SHARPENING_STRENGTH=
export INFINALITY_FT_STEM_ALIGNMENT_STRENGTH=
export INFINALITY_FT_STEM_FITTING_STRENGTH=
export INFINALITY_FT_GAMMA_CORRECTION="0 100"
export INFINALITY_FT_BRIGHTNESS="0"
export INFINALITY_FT_CONTRAST="0"
export INFINALITY_FT_USE_VARIOUS_TWEAKS=false
export INFINALITY_FT_AUTOHINT_INCREASE_GLYPH_HEIGHTS=false
export INFINALITY_FT_AUTOHINT_SNAP_STEM_HEIGHT=
export INFINALITY_FT_STEM_SNAPPING_SLIDING_SCALE=
export INFINALITY_FT_USE_KNOWN_SETTINGS_ON_SELECTED_FONTS=false
fi
################# CUSTOM STYLE #################
if [ "$USE_STYLE" = "CUSTOM" ]; then
export INFINALITY_FT_FILTER_PARAMS="11 22 38 22 11"
export INFINALITY_FT_GRAYSCALE_FILTER_STRENGTH=0
export INFINALITY_FT_FRINGE_FILTER_STRENGTH=0
export INFINALITY_FT_AUTOHINT_HORIZONTAL_STEM_DARKEN_STRENGTH=10
export INFINALITY_FT_AUTOHINT_VERTICAL_STEM_DARKEN_STRENGTH=25
export INFINALITY_FT_WINDOWS_STYLE_SHARPENING_STRENGTH=0
export INFINALITY_FT_CHROMEOS_STYLE_SHARPENING_STRENGTH=0
export INFINALITY_FT_STEM_ALIGNMENT_STRENGTH=100
export INFINALITY_FT_STEM_FITTING_STRENGTH=100
export INFINALITY_FT_GAMMA_CORRECTION="0 100"
export INFINALITY_FT_BRIGHTNESS="0"
export INFINALITY_FT_CONTRAST="0"
export INFINALITY_FT_USE_VARIOUS_TWEAKS=true
export INFINALITY_FT_AUTOHINT_INCREASE_GLYPH_HEIGHTS=true
export INFINALITY_FT_AUTOHINT_SNAP_STEM_HEIGHT=100
export INFINALITY_FT_STEM_SNAPPING_SLIDING_SCALE=0
export INFINALITY_FT_USE_KNOWN_SETTINGS_ON_SELECTED_FONTS=true
fi
And here is fonts.conf:
<?xml version="1.0"?>
<!DOCTYPE fontconfig SYSTEM "fonts.dtd">

<fontconfig>


<dir>/usr/share/fonts</dir>
<dir>~/.fonts</dir>

<match target="pattern">
<test qual="any" name="family">
<string>mono</string>
</test>
<edit name="family" mode="assign">
<string>monospace</string>
</edit>
</match>

<match target="pattern">
<test qual="any" name="family">
<string>sans serif</string>
</test>
<edit name="family" mode="assign">
<string>sans-serif</string>
</edit>
</match>

<match target="pattern">
<test qual="any" name="family">
<string>sans</string>
</test>
<edit name="family" mode="assign">
<string>sans-serif</string>
</edit>
</match>

<include ignore_missing="yes">conf.d</include>

<cachedir>/var/cache/fontconfig</cachedir>
<cachedir>~/.fontconfig</cachedir>
<config>

<blank>
<int>0x0020</int> 
<int>0x00A0</int> 
<int>0x00AD</int> 
<int>0x034F</int> 
<int>0x0600</int> 
<int>0x0601</int> 
<int>0x0602</int> 
<int>0x0603</int> 
<int>0x06DD</int> 
<int>0x070F</int> 
<int>0x115F</int> 
<int>0x1160</int> 
<int>0x1680</int> 
<int>0x17B4</int> 
<int>0x17B5</int> 
<int>0x180E</int> 
<int>0x2000</int> 
<int>0x2001</int> 
<int>0x2002</int> 
<int>0x2003</int> 
<int>0x2004</int> 
<int>0x2005</int> 
<int>0x2006</int> 
<int>0x2007</int> 
<int>0x2008</int> 
<int>0x2009</int> 
<int>0x200A</int> 
<int>0x200B</int> 
<int>0x200C</int> 
<int>0x200D</int> 
<int>0x200E</int> 
<int>0x200F</int> 
<int>0x2028</int> 
<int>0x2029</int> 
<int>0x202A</int> 
<int>0x202B</int> 
<int>0x202C</int> 
<int>0x202D</int> 
<int>0x202E</int> 
<int>0x202F</int> 
<int>0x205F</int> 
<int>0x2060</int> 
<int>0x2061</int> 
<int>0x2062</int> 
<int>0x2063</int> 
<int>0x206A</int> 
<int>0x206B</int> 
<int>0x206C</int> 
<int>0x206D</int> 
<int>0x206E</int> 
<int>0x206F</int> 
<int>0x2800</int> 
<int>0x3000</int> 
<int>0x3164</int> 
<int>0xFEFF</int> 
<int>0xFFA0</int> 
<int>0xFFF9</int> 
<int>0xFFFA</int> 
<int>0xFFFB</int> 
</blank>

<rescan>
<int>30</int>
</rescan>
</config>
</fontconfig>
Infinality.conf:
<?xml version='1.0'?>
<!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
<fontconfig>








<selectfont>
<rejectfont>
<pattern>
<patelt name="fontformat" >
<string>Type 1</string>
</patelt>
</pattern>
</rejectfont>
</selectfont>

<match target="font" >
<edit name="embeddedbitmap" mode="assign">
<bool>false</bool>
</edit>
</match>

<match target="pattern" >
<edit name="prefer_outline" mode="assign">
<bool>true</bool>
</edit>
</match>


<match target="pattern" >
<edit name="bitmap_monospace" mode="assign">
<bool>false</bool>
</edit>
</match>


<match target="font">
<edit name="force_autohint" mode="assign">
<bool>false</bool>
</edit>
</match>



<match target="pattern">
<edit name="dpi" mode="assign">
<double>96</double>
</edit>
</match>




<match target="pattern" >
<edit name="qt_use_subpixel_positioning" mode="assign">
<bool>false</bool>
</edit>
</match>

<include>infinality/conf.d</include>
</fontconfig>
I tried every conf.d symlink in the /etc/fonts/infinality/styles.conf.avail folder. I just can't get the fonts to be sharp with nice uniform smoothness. They look garbled.
I just tried the ubuntu freetype and it looks worse.

Freaky Font Rendering

So, I've managed to successfully embed a couple of fonts into
my AS3 file; one is a vector font (ITC Avant Garde Gothic), and the
other is a pixel font (supernatural). Now, here's where the
problems start...
First, my Avant Garde font renders VERY poorly. On my
TextField, I've tried both anti-aliasing strategies provided by
flash.text.AntiAliasType, and both look aweful; I get the same
blurry, jagged edges! As well, I can't seem to figure out how to
use the "extra light" font in the ITC Avant Garde Gothic family.
The compiler complains when I try to specify the extra light font
in my embed directive. It seems to only want the "regular" font.
Any thoughts?
Second, my pixel font is supposed to be rendered at 10
pixels, so I'm rendering the font at 10 pixels. It looks great!
Well, other than the fact that the SWF seems to only recognize
characters [a-n], everything thing else is excluded, so "Harper"
displays as "Hae". I've tried other pixel fonts with the same
result. Vector fonts work, but look aweful at 10 pixels--with all
of that heavy anti-aliasing that's going on in there.
Please! Help me! I'm begging! This is worse than having to
wait for next week's episode of Lost!
Cheers,
Tim Lowrimore

So, I've managed to successfully embed a couple of fonts into
my AS3 file; one is a vector font (ITC Avant Garde Gothic), and the
other is a pixel font (supernatural). Now, here's where the
problems start...
First, my Avant Garde font renders VERY poorly. On my
TextField, I've tried both anti-aliasing strategies provided by
flash.text.AntiAliasType, and both look aweful; I get the same
blurry, jagged edges! As well, I can't seem to figure out how to
use the "extra light" font in the ITC Avant Garde Gothic family.
The compiler complains when I try to specify the extra light font
in my embed directive. It seems to only want the "regular" font.
Any thoughts?
Second, my pixel font is supposed to be rendered at 10
pixels, so I'm rendering the font at 10 pixels. It looks great!
Well, other than the fact that the SWF seems to only recognize
characters [a-n], everything thing else is excluded, so "Harper"
displays as "Hae". I've tried other pixel fonts with the same
result. Vector fonts work, but look aweful at 10 pixels--with all
of that heavy anti-aliasing that's going on in there.
Please! Help me! I'm begging! This is worse than having to
wait for next week's episode of Lost!
Cheers,
Tim Lowrimore

Font Rendering Got Bad After 32.0 Update

After the recent update, the font started to get badly rendered. Kind of blurry with jagged edges and transparent parts. It used to be okay D:
Sometimes it becomes okay for a moment as I scroll down on pages, and sometimes when I stop scrolling, the font stays as it is; as if there are specific positions for the text to render properly. However, not all of the fonts are affected. Only the ones inside the scroll area.
On times that the font renders properly, the bookmarks font, title bar, and tab names are unaffected and still appear not-smooth. Same thing does not happen on other browsers. All my other system fonts look okay; it's really just Firefox.
Restarting Firefox = didn't work
Restarting Computer = didn't work
Tried setting up Clear Type = didn't work
Tried enabling and disabling Hardware Acceleration on Firefox = didn't work
Tried enabling and disabling the Graphics card itself = didn't work
Tried just about all of the suggestions I found on Google = none worked
Tried complete uninstall and re-install of Firefox 32.0 = didn't work
Graphics Driver are updated ~
Windows is updated ~
I'm using Windows 7 Ultimate 32 bit
Graphics AMD Radeon HD 6800
I fixed it by downgrading to Firefox 31 which makes me sure that 32.0 is the culprit. As I was about to send the message on top; I tried downgrading as my last resort and it worked. Now I'm only sending this as a report. I am hoping you'll figure out what caused it because I am quite strict (OC) that everything in my PC must remain updated >_<; thus I want to use Firefox 32.0 as much as possible.

No one to help on this ??????

Flex 4.5/FP10.2 web app: Font rendering problem

Heya,
Upped a web app from Flex 4.0/4.1 to Flex 4.5 & fonts started to render really badly (blurry & 'stronger').
They are embedded as CFF, no errors or warnings gives. Also upgraded to Flash Player 10.2, which apparently has 'enhanched' font rendering.
Haven't set applicationDPI on the s:Application tag, so DPI management should be disabled according to the docs.
(See http://help.adobe.com/en_US/flex/mobileapps/WS19f279b149e7481c682e5a9412cf5976c17-8000.htm l)
It's straight up @font-face embeds in a CSS file, nothing odd or wrong there.
Is the case that this is how it's supposed to look now? In that case, how do I revert back to sane rendering?
Do I need to configure 4.5 somehow to get it to do fonts right?

Also tested Franklin Gothic, same deal. Tested on Mac (10.2) & PC (10.2 & 10.3). Flex 4.5 for both platforms.
fonts.css:
@font-face
src: url("fonts/arial.ttf");
font-family: Arial;
font-weight: normal;
embedAsCFF: true;
FontTest.mxml:
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600">
<fx:Style source="fonts.css"/>
<s:Label x="20" y="20"
fontFamily="Arial"
fontLookup="embeddedCFF"
fontSize="12"
cffHinting="horizontalStem"
text="TESTAR Testar testar" />
</s:Application>

Font rendering differences between Xfce and KDE

Hi,
I am using both KDE and Xfce (mostly Xfce with KDE apps) and I observed that there is a font rendering difference between Gtk (Xfce) and QT (KDE) apps.
In both desktop environments I use dejavu sans font, size 9 and I have set RGB subpixel rendering and hinting to full.
I created some screenshots of dolphin and thunar to illustrate the differences (right click and select view image to see the screenshots in full resolution)
Can somebody help me to make gtk app fonts to look the same as qt ones? Or at least tell me why there is this difference.
Thank you.

I cant tell you why there is a difference, but this page may help you. https://wiki.archlinux.org/index.php/Font_Configuration
I ended up installing the Ubuntu patched packages in the AUR, but there are different options.

Font rendering quality in Illustrator is terrible!

What the heck rode Adobe when they implemented the new font engine?
Why, oh why is Apple's font rendering so much better? And why wouldn't Adobe use something that's already readily available on the mac platform?
I have a huge problem mocking up website layouts in Illustrator. Type looks much better in Firefox or Safari. How come, huh?

I believe this is the result of sub-pixel antialiasing (SPAA), which optimizes text appearance on laptops. Illustrator's rasterizing doesn't SPAA, which is fine for most CRTs, print, and LCD displays that might be rotated.
It's more a case of the OS being savvy enough to tell what kind of display you have and antialias appropriately. Illustrator's rendering engine does need to support SPAA.

Poor font rendition in reader, fine in Pro

I have both Adobe acrobat reader 9, and Adobe Acrobat Pro.
I generally just read documents with the reader, but recently I find that the reader gives a very poor font resolution, even at 100%, but Pro gives a great rendition of the same documents at any scale. Printing is find from either.
What can be broken with the reader - it is the latest version?

I had the same problem which started only recently. I think it has to do with Flash Player's recent updates.
I updated to Reader 10 and also the latest Flash Player direct from the Adobe site and the problem was solved. Resolution went from barely readable even expanded to crystal clear with default settings. I was using Reader 9 and it was telling me there were no more updates. My guess is that recent updates to Flash Player were not compatible to Reader 9.
Anyway, I think this will solve your problem.

Font rendering OS X issues

Hi people,
I baught a MacBook Air and I am new to OS X. I have this machine since 1 month and I simply cannot get used to the font rendering of OS X. I thought I get used to it after a while, but I don't. I feel like I have body lotion in my eyes all the time, fonts are really blurry and I can only work on that machine for some time. On my windows machine I worked all day long, with no such problems, but not in OS X. It is set to native resolution and I already set the font smoothing to 1, but this is still not enough, while turning font smoothing completely off makes everything look very ugly.
I wonder why no one ever mentioned that in reviews, etc.? Does it not bother mac users? However, is there some other option (besides scaling down to lower resolution)? I have headache almost every evening, so this is really a problem to me.
Thanks in advance.

Do any other applications behave like that? Or just these two?

Crisp / Clear Font Rendering?

Is there any suggestion on Arch Linux running Gnome 2.6.30 to improve the crisp / clearness of my fonts? I installed the latest available nVidia drivers & under 'Appearance' > 'Fonts' > 'Details', I show the following:
* Resolution: 98 dots per square inch.
* Smoothing: Subpixel (LCD)
* Hinting: Slight
* Subpixel Order: RGB
It just never seems as clear and crisp when I compare side by side to Ubuntu or Windows 7. The font clarity is notable difference beween Arch and I would like to change this. Any help and or tips would be greatly appreciated!
Screenshot
-Carlos
Last edited by Carlwill (2010-04-28 13:25:23)

Ubuntu uses special patches for their font rendering: http://wiki.archlinux.org/index.php/Fon … d_packages
Windows uses Cleartype: http://wiki.archlinux.org/index.php/Fon … e_packages

Poor font rendering

Similar Messages

Maybe you are looking for