Poor import quality??

I've been using FCPX for my past few projects & only just now realized that it's not my camera / lens making my videos look blurry, it's Final Cut! I'm using a Canon T3i, which records in H264 at 1080p, 24fps. If I play the videos back via HDMI onto a monitor from the camera, they look great. If I play them in the Finder, they look great. As soon as they come into FC, they are ruined & I cannot figure out why. I'm running version 10.1.2 on OS 10.9.4.
- I don't have any of the transcoding boxes checked on import
- Under "Quality", I have Better Quality selected
- Under "Media", I have Optimized/Original selected
- Even after exporting as H264, 1080, it looks equally as bad if not worse.
I also just did a short screen capture video of my entire Thunderbolt Display screen. When played back in the FC project, it looks blurry & terrible.
Anyone have any ideas??

silence2-38554 wrote:
As soon as they come into FC, they are ruined & I cannot figure out why. I'm running version 10.1.2 on OS 10.9.4.
Right click on one of your clips and choose Reveal in Finder. If you copied the media to your library, it should take you to the Original Media folder. Open that clip in Quicktime player. How does it look?
If it looks OK, create a new test project. Choose automatic for project settings – so that your clip determines project settings. Edit the clip to the timeline. Export that clip as a Pro Res 422 master file. How does that look?
Russ

Similar Messages

Poor import quality when capturing DV.

Hi Guys
FCP X is now my third Mac software attempt to get good import capture but still failing.
When i import footage from my Sony HVR Z1E via Firewire the captured footage is seriously low in quality yet massive in file size as should be. When i go into my FCP X Events folder to check the Original Media folder the captured footage is seriously poor. It lacks the 50i and seems to have dropped frames to make it 25fps so its extremely jittery where as original footage is smooth with usual video look. Also the captured footage is low in colour and punch and has terrible sharpness. I used to have same problems with FCP Express also.
However when i owned a cheap PC laptop and captured footage using cheap Pinnacle software the captured footage was as per DV. Extremely sharp and very rich in colour and quality.
Can alyone explain this problem i am at odds end now.
This is my second Mac Book Pro using Mac OS X 10.6.8.
P.S Its PAL i record in as living in UK
Thanks
Tahir

DV can only be viewed properly on a video monitor. Unfortunately FCP doesn't support that. There is no loss in quality when importing DV media.
If you want to see the interlacing in the FCP viewer you have to switch it on with the view switch in the upper right corner.

Poor photo quality when importing to iMovie

I imported some photos to make a slide show with added soundtrack. When I select a photo and click the "Show photo settings" it looks crisp and clear, just as it was shot. As soon as I deselect the "Show photo settings" button it looks blurred, pixeled and fuzzy, just an ultra low quality photo. The end result of the video slide show it's just a low end work.
I just want to burn some DVD's to show my photographic work, but such a poor photo quality it's not going to help me achieve what I had intended.
Any clues anyone???

I'd like to follow up on your answer re: resolving poor photo quality. It seems the mere act of bringing photos into iMovie degrades the quality. You look at the photo in the preview window and it looks crisp. But then when you "ADD" it to the timeline, it becomes almost fuzzy. Isn't iMovie rendering the photos then and there as you bring them into the timeline? I cannot seem to make the photos look sharper and it doesn't seem to help doing the slideshow first in iPhoto, which I'd rather not do anyway.
Any suggestions?

Poor imported audio quality in Captivate 4

Hi Everyone,
I'm having some serious audio quality issues with Captivate 4. I'm recording my audio in Audacity and importing it into Captivate. The audio sounds great in Audacity, Windows Media Player, iTunes, and everything else I've tested it in. However, once I import it into Captivate and press play, it sounds horrible. It's thin, tinny, and robotic. The degradation in quality is considerable. I've tried recording my audio as both .mp3s and .wavs, but they both sound bad once imported. I've also downloaded all of the available patches, including the patch specifically designed to address poor audio quality in Captivate 4. I've tinkered with every audio setting I can find. No luck. I have noticed that the shorter/smaller audio files are less garbled, and really short files are sometimes not garbled at all. I would record directly into Captivate, but the audio sounds even worse when I do that. Anyone have any idea how I can remedy this situation? Just for background info, I'm running Captivate 4 on a macbook running XP via parallels.
Thanks

Hi,
I responded here in the forums because I figure other people might need this info as well.
In Audacity, I go to:
Preferences -> Quality -> Default Sample Format and set it to 16 bit.
Then click OK.
When you record new audio tracks, they should automatically be set to 16 bit.
Does that help?
Shawn
**CONFIDENTIALITY NOTICE and DISCLAIMER**
This message and any attachment are confidential and may be
privileged or otherwise protected from disclosure and solely for
the use of the person(s) or entity to whom it is intended. If you
have received this message in error and are not the intended
recipient, please notify the sender immediately and delete this
message and any attachment from your system. If you are not the
intended recipient, be advised that any use of this message is
prohibited and may be unlawful, and you must not copy this
message or attachment or disclose the contents to any other person.

Poor sound quality in timeline and export; fine in Source?

Hello all.
Newbie to Pr but experienced pro in digital audio. I'm stumped and know I'm just missing something somewhere.
I've made a music video for one of my songs. The graphics are all done (in AE), imported to Pr and eveything looks great. I import the final mix of the audio and it sounds very low quality when played from the timeline and in the final output, regardless of format (I've tried several presets and custom settings as well). I played around and noticed that the audio sounds fine when played from the Source window inside Premier.
The Pr session is comrised of 18 video tracks (not all playing at once, of course) and one stereo audio track.
I've tried re-exporting the audio from Logic at different bit depths, sample rates and file formats (mp3, wav, AAC, etc) but the results are the same every time: Source (Pr)sounds fine, Logic output sounds fine, rendered / timeline playback sounds like very low quality mp3 and final product sounds just as bad.
I've tried everything I can think of. I hope one of you can show me what I'm missing.
TIA!
Mark
Premier Pro CC
Processor 2 x 2.8 GHz Quad-Core Intel Xeon
Memory 8 GB 800 MHz DDR2 FB-DIMM
Graphics ATI Radeon HD 2600 XT 256 MB
Software OS X 10.9.1 (13B42)

Thank you for the reply!
I was experiencing the same results no matter what export settings I used. Plus the poor sound quality was present in the timeline itself, without even exporting the project.
I finally threw my hands up, started a completely new project, drug the same audio file in... sounded fine. Copied / Pasted the video clips from the original, broken project and boom, eveything is fixed. Yeah, corrupted Pr file it turns out. All I had to do was start a new project and import all the old components.
I've had to do this in Logic a lot (increasingly, these days). I just wish I'd tried it 10 hours earlier! Ha.
Anyway, problem solved, and thanks very much!

Import quality issue with AVC/H.264 and workaround

When I import from my Sanyo Xacti HD700 using "Import from Camera..." the import quality has significant blocking / compression artifacts. However, if I copy the same file off the SD card from the camera and play it back in QTplayer it does not have this same blocking / compression artifacts.
The file is a .MP4 container using H.264 codec for video and AAC for audio. The resolution is 1280x720p and framerate 30fps.
After spending a significant portion of time messing around with iMovie 08 trying to get it to import without the quality loss I have discovered that "Import from Camera..." and "Import Movies..." have different behavior (in terms of video quality) on the SAME FILE.
*To reproduce*:
1) Record a video with Sanyo Xacti HD700 camera. (One with a nice color gradient is good because it will make the compression artifacts more obvious).
2) Import the video from the camera using "Import from Camera..." (Name the event "Import from Camera" so you can remember which is which)
3) Copy the .MP4 file from the mounted drive onto your local harddrive. (Not sure if this step is actually necessary, but haven't tried without)
4) Import the video from the .MP4 on your desktop using "Import Movies..." (Name the event "Import Movies") Notice that this completes much quicker than step 2.
5) Find the two imported movies in your "iMovie Events" folder. You will notice that both movies are different sizes when you would expect them to be identical. (In my case the movie from "Import from Camera" was 47.4MB while the movie from "import movies" was 33.1MB, and the file on the SD card was 33.1 MB)
6) At this point you will also notice that the movie imported from camera will have a custom name like clip-2007-12-26 14;41;44.mov while the movie from "import movies" will have the same filename as it did on the camera i.e SANY0025.MP4.
7) Now open both files in QTplayer and arrange them side by side showing the same frame. You will see that the quality is much worse in the file from "Import from Camera".
Hypothesis:
My guess is that when you select "Import from Camera" it does some transcoding on these files that it doesn't do when you select "Import Movies". (Maybe Import from Camera always transcodes, whereas Import Movies checks to see if it needs to transcode or not?) I believe this because it takes significantly longer using the "Import from Camera" during which time it would appear to be performing some type of transformation on the movie. Also, because the file name in the folder is different.
I believe that either this transcoding is flawed or of poor quality which leads to the poor quality video when importing.
*Work around*:
Use "Import Movies..." instead of "Import from Camera..."
Note that I have not yet taken this through the export process to know how this will impact the final output.
Finally, for the skeptics, here is a screengrab of the two movies side by side in QTplayer on the same frame. The one on the left was imported with "Import from Camera" and the one on the right with "Import Movies". Look at the right side of the yellow playset and also at the hair. In motion it looks quite bad.
Thoughts?

Really? You don't see the difference?
Ok, well here is it blown up to 2X to make it more obvious:
and here it is blown up to 2X and with the contrast increased to make it even more apparent:
I perhaps didn't pick the best frame as an example, but it is very obvious in motion. If necessary I suppose I could post a small movie clip to show.
Message was edited by: Richard_

FCE import quality vs. iMovie

Is FCE capable of capturing/importing video at an improved quality level than iMovie 6?
I understand the superior editing & functionality aspects of FCE, but am trying to see if using FCE also gives you the ability to produce a higher quality video. FYI, I will be working with a bunch of MiniDV tapes.

I went to FCE because I was disappointed with the DVD final results of iMovie 06 at its best setting (at least what I think is the best). Thinking Imovie was just a poor factory add-on program I got FCE and on my initial tests with the same footage imported then exported through their respective programs, I saw great differences in the picture. Viewed back on a good Panasonic Gaoo 37 inch TV.
Smoke or fog, trees, anything with a lot of detail seemed less vibrant with iMovie.
I am open to opposition on these findings as perhaps something wasn't set right, but to date I have not been able to encode a DVD from Imovie as well as that from FCE
I suppose this is off topic since the question was of import quality, not export.
Cheers

Poor Sound Quality with iTunes 8

I just installed iTunes 8, and all of the songs in my Library play with poor sound quality regardless of the view I have open. The sound is really muffled, but the voices and higher frequencies sound tinny and shaky. I tried playing with the Equalizer and Sound Enhancer settings, but was not able to fix the problem.
What can I do to get the iTunes 7 sound back?

I, too, am experiencing a significant decline in the sound quality of recordings in my collection. The recordings sound very muffled on the low, bass end of the sound spectrum, and the treble is significantly diminished. This decline in sound quality occurred immediately after I upgraded to iTunes 8. The sound quality in iTunes 7 was fine, and overall better.
It appears that my iTunes 8 attempts to improve the playback sound quality of songs with 128 kbps bit rates, as these songs in my collection do seem to actually sound better. However, most of my collection are recordings imported at the higher sound quality standard of 320 kbps from CDs that I purchased, and these recordings all sound poor since I've installed iTunes 8.

Poor Image Quality on Finished Project

I've seen similar questions before, but no responses. I put together a movie using still pictures, titles, and audio from iTunes using iMovie. I then export it to a .m4v format and import it into iDVD (the newest version). It looks perfect when I view it on my computer, but when I burn it (which works as it should), I get very poor image quality watching it on my TV. The images have red shadows that stretch and cover the faces. Some of the pictures are just more red than they should be, but others are just terrible. Even using the highest quality encoding, the problem persists. PLEASE HELP. Thank you.

Hi
a. make a DiskImage first and test this with Apple DVD-player.
(File menu and down "Make a DiskImage")
b. I only use streamingDV - no .m4v or like (may be it works - I don't know)
else
*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
iDVD pref file resides. Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named.
com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
• Program miss-match. iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match. iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match. iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
Last resort. from Craig. Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
If You do a re-install be sure to get rid of all iDVD old parts AND then EMPTY the Trash-basket !
Yours Bengt W

HP LaserJet 2600n poor print quality/streaking

I am the original owner of an HP LJ 2600n with a poor print quality/streaking issue. The poor print quality occurs with any and all paper that I use (currently Hammerhill 20# stock) and occurred with Windows XP and Windows 7. The print cartidges are all genuine HP and changing them does not make any difference. I have cleaned the front door roller with no improvement. My firmware version is 20070716. The black cartridge is at 33%; yellow 75%; cyan 91% and magenta 91%...
Any advice would be appreciated. An example of the output is attached below:

Hi everyone,
I have resolved my problem. I took a leap and purchased a new toner cartridge, and the new catridge works great. Installed it yesterday and the test page comes out clean, clear and with no double image. I'm happy.
Apparently the printer had not had a print item sent to it in over a year. I think that was actually hard on the toner cartridge.
Tthanks to everyone for their help via private emails!
mark

Very poor video quality after transcoding in Adobe Encore CS5.1

MERRY CHRISTMAS AND A HAPPY NEW YEAR!
I have very poor video quality after transcoding the video file (MPEG) in Adobe Encore CS5.1. Below you see my used settings in my filmproject.
The problem exists after transcoding in Adobe Encore CS5.1. I checked all steps and found out that there is no problem until transcoding. My exported file in MPEG has very good video and audio quality.
Facts:
1. Camcorder: Panasonic AG-AC160AEJ
Operating System : Windows 7, 64 Bit, Ultimate edition
Source files: MTS files
Recording settings (clip settings):
Type: MPEG Movie
Image Size: 1920 x 1080
Frame Rate: 25,00
Source Audio Format: 48000 Hz - compressed - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Pixel Aspect Ratio: 1,0
2. Sequence settings in Premiere Pro
Sequence was created from Clip directly with settings above.
3. Exporting settings in Adobe Premiere Pro:
Match sequence settings was activated. Now other changes were set.
4. Exported File:
Video
Image Size: 1920 x 1080
Data Transfer Rate: 25920 kBit / s
Frame rate: 25
Audio:
Bit rate: 384 kBit / s
Channels: 2 (stereo)
Frequence: 48 kHz
5. Transcoding settings in Adobe Encore:
I used different transcoding settings such as automatic DVD Transcoding, CBR and VBR.I also set “use maximum render quality”. But all results were always the same: very poor quality.
Why does the encore transcoding cause such bad video quality?
How can I solve this problem?
Please help me soon.
Best regards.

Hi Ann,
1) I did not only „Automatic (based on source)“ options in my tests, but also many other customized options.
The results are very poor. I have done a new test with the following settings. The result is also poor:
Download link: http://www.klavierlehrer-bayern.de/download/test_mpeg2dvd_1.m2v
Export Settings:
Format: MPEG2-DVD
Preset: Custom
Codec: MainConcept MPEG Video, Quality: 5
Frame Rate: 25 fps
Field Order: Upper
Pixel Aspect Ratio: Automatic (based on source)
Render at Maximum Rate: [active]
Bitrate Encoding: VBR, 2 pass
Minimum Bitrate (Mbps): 5
Target Bitrate (Mbps): 9
Maximum Bitrate (Mbps): 9
GOP Settings
M Frames: 4
N Frames: 12
Use Maximum Render Quality: [active]
Multiplexer: None
2) Why shouldn’t I use the “Match Sequence Settings” in exporting? Because of the big output file size?
I used it and the results are very good as I expected:
Download link: http://www.klavierlehrer-bayern.de/download/test_MatchSequenceSettings.mpeg
Export Settings
Match Sequence Settings [selected]
1920 x 1080, 25 fps, Upper, Quality 50
User Maximum Render Quality: [active]
3) I tried also Dynamic Link in PremierePro (to Encore).
The results are also poor.
4) I will test also LagarithLoslessCodec and frameserving +DGMPGDec. But the video is vertical long drawn-ot.
I think I did not use it correctly.
Regards

HT201335 Airplay Mirror Poor Image Quality on CBS app - help?

Airplay mirror from iMac/iPad to HD TV w/Apple TV has a Poor Image Quality when watching network shows via for example the CBS.com site or the CBS app. The image looks dark, not HD at all. My internet speed/performance is obviously not the issue because Hulu, Netflix etc all come in great using Apple TV ~ sorry, not all that savvy in this department, is the poor picture down to it just being a mirror of the iMac or iPad or is there a setting or something I am missing?

You should use the Acrobat extra menu in word 2010: then edit Preferences and choose Conversion settings : High quality print
Hope it helps

Has anyone had issues with poor image quality when using lightroom to process raw images from Canon 7dmk2

Hi everyone..
..I have been having image quality issues when using Lightroom to process raw files from a 7d mk2... They are all soft with poor clarity.....tonight in despair I tried processing them using canon's software and they are totally different..."much better"
anyone else had similar problems....Andy

I have a 7D2 and have not had what I interpret as poor image quality that has anything to do with the camera.
Can you post a screenshot of what you’re seeing and what specifically you don’t like? Maybe there is something you can do differently or at least there may be an explanation for what you’re seeing.
And if you have a raw image that you wouldn’t mind sharing in a public forum, upload to http://www.dropbox.com/ then post a public share link to it in a reply, here.
In other words post a screenshot of what you see in LR, another of what you see using DPP, and a link to the raw file you’re processing.

Aperture Light Table - Poor image quality

I am using the Light Table function in Aperture (3.4.5.) and I had an issue with the quality of the images on it, when zoomed in or scaled to fit.
The quality of the (larger spread) images looks poor. As if I zoomed in on a thumbnail.
I was looking for a discussion on this and saw some (archived) threads. None of them solved.
However, I think I have found a workaround.
If you get this situation, you can select the image(s) on the light table and regenerate the preview.
Option-click Menu => Photos => Generate Previews
(note: if you don't use the Option key, you will get Menu => Photos => Update Previews and Aperture may say (unjust) that the preview is already up-to-date).
That solves the poor image quality look.

I just remade the same book - as a test - in the extra large hardback format (ie. the one I used for the previous publication, last year).
This time, the pictures are fine. The images appear to be the same quality in the PDF as the originals - much, much better. The size of the file has increased massively too > up from just 2.6MB to 52.8MB.
So does the books production function work well only with the biggest, most expensive option?
I'd really appreciate some feedback from anyone who's tried the different sizes, and preferably some brilliant ideas to make them all work equally well.

Poor image quality save for web

It doesn't matter whether i'm exporting from Ai or Ps or whether it's CS6 or CC. I have changed the raster settings in Ai and i've also tried all optimization options with all different export file types (jpg, png, gif) at all different quality settings. It doesn't matter if I start with an ai, eps, pdf, png... the export result is always poor quality.
I have tried exporting at 300ppi and that does fix the quality issue and bloats the file size, but this way (the export route) is so time consuming since you have to resize your artwork each time as well as the artboard so that it doesn't cut off pixels. Save for web never used to have these quality issues and it also never used to cut off pixels around the edges. These workarounds prove very time consuming and produce file sizes that are not ideal.
When i first noticed this issue I was using Mavericks with CS6 and since am using Yosemite and Creative Cloud.
Steps to reproduce:
1. Create any bitmap or vector graphic in Ai or Ps, It doesn't matter whether you convert text to outlines or not
2. Save for web
3. View image in any application or browser to see poor quality and pixel trimming. Others running the same version and system are not having this issue, but I have checked many forums and found many others that do have this same issue but can't seem to find a solution.
Results:stair stepping, degradation, pixel trimming, general poor image quality
Expected results: Previously the save for web feature allowed for a decent quality image

First try the Cleaner. here's the link for CC but there exists one for Cs6 as well Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Everything I have read says that you kind of have to compromise file-size for quality. Could you post a screenshot of your settings?
also, if it helps: Creative Suite * Optimizing images

Poor import quality??

Similar Messages

Maybe you are looking for