Poor Internet Connection/Have to keep resetting the modem

For the past two months our internet service has been terrible.  I've had numerous phone calls with Verizon tech support and had two technicians visit our house.  Needless to say, after all new wiring in our house, updating the lines outside our house, and a new modem I still have to reset the modem several times a day and then when the internet does work it is extremely slow.  The technician said my house and my neighbor's house don't even show on the grid for our local Verizon office and that the problem is somewhere between our road and their office........so how does that get fixed?  Apparently the lines are too busy and it just keeps kicking us off.  Has anyone else experienced a problem like this?  I work part time from home and rely on my internet service.  I also don't have the time to contact Verizon every single day!  Help!

Hi country105,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. The title of your post is the link. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.

Similar Messages

  • Trying to connect to a known internet connection but i keep getting the response "unable to join network"

    Trying to connect to a known internet connection but I keep getting the response "Unable to join network" and the internet is connected, please help.

    Okay now this description was pretty vague but it could be a few things. First thing to try. Turn wifi off and then one again and try to connect. If this fails read on.
    The second step is to select that network in the wifi settings so you get an expanded menu of it. Follow these steps from the home menu on your ipad... SETTINGS>Wi-FI>NETWORK NAME (you have to click the little blue arrow)> FORGET THIS NETWORK. Then turn wifi off and then on. Then try to connect again. If this fails... well read on,
    Okay, so now you really know it's most likely not your ipad, so go on down to your wifi router and turn it off, wait ten seconds, turn it on again. WITH YOUR IPAD OFF. Then turn on your ipad on and then try to connect again. If this fails... Then you'll have to do some more complex things. You could try setting up the network again. IF that fails too. Leave some details about your router, brand, year etc... And I'll try to let you know what else it could be.

  • Have to keep resetting the service number

    I have got a new i phone 4s and my old i phone 3 number was transfered over to my micro sim in store, the problem I am having is ever day I have to reset the service number as it keep going back to a pay monthly one and im on pay as you go. is there any ideas on what to do

    If there is, I haven't found it. Every couple of days I toggle the setting off and on to get it to work again and it lasts for two or three more days, then I repeat the process. I have reset all settings and restored my iPad and I still can't get to work reliably.

  • I have Comcast internet, my roommates PC (with viruses) runs at the speed of light while my iMac struggles.  My iMac worked fine on other internet connections before we got our own internet.  I've reset the modem, cleaned my Mac, still nothing helps!

    As my title states, the PC works super fast and mine struggles.  We have $75 internet which goes to say that our internet is mega fast.  Before we got our personal modem, we were sniping other peoples internet in our apartment complex.  Even with a few bars of internet from AirPort, it was going faster than our internet now.  I've reset the modem, I've inserted DNS's, I've cleaned my Mac, everything I can think of.  I need help.  I called Comcast and they said it was my iMac.  I just bought this iMac in October.  It's still new to me.  Comcast says it's my iMac but I do not believe them.  My iMac runs fast, until I try to use the internet, so I know it's somehting with the internet.  Please help, it's making me regret spending $1300 on a computer

    I have asked a moderator to provide assistance, they will post an invite on this thread.
    Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
    Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • I have had over 5 time out err-3259 trying to update my Ipad 2 on my imac from last night and all this morning. Anyone else having this issue? It is definitely not my internet connection etc. Right in the end at 99% this error message comes out. Help

    I have had over 5 time out err-3259 trying to update my Ipad 2 on my imac from last night and all this morning. Anyone else having this issue? It is definitely not my internet connection etc. Right in the end at 99% this error message comes out. Help

    Hi, aliahfromauckland.
    If you are still experiencing issues when attempting to update your iPad, see the article below. 
    iTunes Store reporting error - 3259
    http://support.apple.com/kb/TS2799
    Hope that helps,
    Jason H. 

  • TS1363 I can't connect to the itunes store from my Windows Vista PC. I have run diagnostics and itunes have verified my internet connection as positive, but not the secure link to the itunes store. This comes up as failed.  Any suggestions?

    I can't connect to the itunes store from my Windows Vista PC. I have run diagnostics and itunes have verified my internet connection as positive, but not the secure link to the itunes store. This comes up as failed.  Any suggestions?

    everytime I try to open the store it endlessly says "accessing iTunes store" but it never opens.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • TS1589 I have to reboot my BTinfinity router to enable me to link my ipod to Airport express. When it is connected it works perfectly, but it is getting a bind to have to keep switching the router power off. Any one help???

    I have to reboot my BTinfinity router to enable me to link my ipod or my iphone to Airport express. When it is connected it works perfectly, I use it to play music through my BOSE soundwave, but it is getting a bind to have to keep switching the router power off. Any one help???
    Ipod touch: 4th generation Upto date software
    Airport Express: Latest model
    Iphone 5: Upto date software

    This can sometimes be the result of a faulty/damaaged USB sync cable.  Do you have another cable you could test it out with?
    B-rock

  • I want to share my internet connection with my iPhone via the usb cable. I have a Macbook pro. What do you think? Is this possible? And if yes, then how?  Thanks!

    I want to share my internet connection with my iPhone via the usb cable. I have a Macbook pro. What do you think? Is this possible? And if yes, then how?
    If not why option available
    Thanks!

    What Carolyn says is correct. You can, however, share an Internet connection with your iPhone wirelessly by turning in Internet sharing (found in System Preferences > Sharing.) If your MacBook Pro is already using a wireless connection, you can just connect to the same wireless network it is using.
    Best of luck.

  • Why when I plug my earphone on my ipod, I hear nothing just the beat and the singer, sing make noise, and to have heard correctly I have to keep taking the listener connection, I would like to know how to repair it? srry google traduc .

    pourquoi quand je branche mes ecouteur sur mon ipod, je entend rien juste le beat et le chanteur , chanter en bruit de font , et pour avoir entendre correctement je dois maintenir la prise de connection des écouteur , j'aimerais savoir comment reparer sa ?
    why when I plug my earphone on my ipod, I hear nothing just the beat and the singer, singmake noise, and to have heard correctly I have to keep taking the listener connection, Iwould like to know how to repair it?

    - Sure sounds like the headphone jack is defective and requires replacement. Try cleaning out/blowing out the headphone jack first.
    - Apple will only replace your iPod for a refurbished one for this price
    Apple - Support - iPod - Repair pricing
    - Google to find a third-party place in yuor country.
    - Replace the jack yourself
    iPod Touch Repair – iFixit

  • Iphone 4s freezing at start up then shuts off and keeps restarting then repeating that process over and over. I have tried to reset the phone two different ways and still this problem occurs after I update it or turn off the phone.

    yes the title says most of what is going on.
    I recently reset my phone, losing all contacts and pictures. It was working fine, then after I updated it, it will not turn on completely.
    It starts up with the apple logo
    -goes to the ios 6 (please slide to open) screen
    -then shuts off
    -and repeats the process unless I shut the phone off manually
    I have tried to hold the lock and the home button down to manually reset the phone
    I have also tried reseting the phone completely previously, and I still have this problem.
    Any ideas?
    Thank you!!

    I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
    When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.

  • Poor internet connectivity through WRT160N

    I bought and installed a WRT160N v.3 router about 3 months ago and all was fine.  Recently, however, very poor internet connectivity has been experienced from my other 2 computers connected via wireless.  Last night I upgraded the firmware (actuallly Linksys tech) and it appeared at first to fix the problem.  Unfortunately, it didn't.  The same problem continues on both computers.  I have since done a hard reset and started from default parameters, but that didn't help either.
    This appears to be a common problem, but I haven't seen a complete fix.
    I have a Comcast cable internet connection and a speed test done on the hardwired computer gives the expected download/upload speeds (~20MBps and 8 MBps).  Through the wireless connection to the WRT160N is another story.  Speeds are less than 0.5MB!
    Any suggestions???

    Well, I think I solved my problem.  I had the router set-up with WEP encryption and was getting very poor internet connections on my wireless PCs.  After trying a miriad of fixes found on this site and others, I decided to go to a unprotected network set-up.  I was amazed to see my wireless connectivty jump to the expected speeds for my Comcast cable connection. 
    Has anyone heard of WEP causing a slowdown in connectivity?
    Guess I will try the other security set-ups to see if I can get fast connectivity and a secure network.

  • Slingbox: setup problem "your Slingbox has been disconnected due to poor internet connection"

    Does anyone have experience in setting up a Slingbox with their Verizon router? If so, have you encountered this error ("your Slingbox has been disconnected due to poor internet connection")? How did you fix it?
    Thanks!!

    #1 Are you on
    a) DSL
    b) FIOS?
    #2 At least what the brand and model of your router is.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Avoided poor internet connection

    Just bought an Android phone and it doesn't connect to my WOW network wifi. Very shortly after saying it is connected, it comes back with the message: "Avoided poor internet connection." I do not have this problem with any of my other wifi connected devices: iPhones, iPad, Dell laptops, TVs, ...

    Do you have smart wifi enabled? It will use OTA data if it detects a weak wifi signal versus cellular service. Turning it off forces the use of wifi, no matter the signal strength.

  • Having trouble to keep internet connection constant, airport keep diconnect

    I just re-install my Mac Os 10.5.2 after 1 year of using my Mac book. Since the re-installation, my airport has become very unstable, it connect to the internet for a few minute then disconnect, i have try to reset the "SMC", but the problem is still here.
    Before the re-installation, the airport was also disconnecting but more rarely than now.
    The time the airport remain connected is between 1 to 4 minutes, then disconnect.
    To use internet after it disconnect, I have to switch off the airport then on again, used for another minutes then again back to on/off process.
    I would like to have some hints how to solve the problem permanently . Thanks

    HI and Welcome to Apple Discussions...
    Try updating your system software to 10.5.8.
    10.5.8 Combo Update Download
    Run Disk Utility and repair disk permissions before and after the installation.
    Carolyn

  • All of a sudden, my ipod touch will only recognize/play purchased items. I then have to completely reset the ipod and re-sync. I've had to do this 6 times, and support has been no help.

    All of a sudden, my ipod touch will only recognize/play purchased items. I then have to completely reset the ipod and re-sync. I've had to do this 6 times, and support has been no help.

    So you also rebooted your router correct?  Does the iPod still connect okay to other networks? 
    B-rock

Maybe you are looking for

  • Xrpcc tool error: NullPointerException

    im trying Hello class example. //interface claas defination is import java.rmi.Remote; import java.rmi.RemoteException; import javax.xml.rpc.server.ServiceLifecycle; public class HelloClass implements HelloInterface, ServerLifecycle{ public String my

  • Search and Create Directory?

    Hello, how do I search for a directory and create it if it doesn't exist? Unfortunately, the 'New Directory' vi can't create a new directory with sub directories. For example, I want to create the directory 'c:\measurements\data'. The 'New Directory'

  • SQL job creation/modification/deletion auditing?

    I have a job 'pop-up' 3 days ago on one of our Servers and of course 'nobody' is coming forward and saying 'I did it'. Is there a way to determine who created the job after the fact? Going forward, is there a way to be notified via email when jobs ar

  • ORA-12014 table does not contain a primary key constraint

    Hi I have some existing Materialised Views I am trying to redeploy through OWB as its now our standard tool. The existing code has CREATE MATERIALIZED VIEW ....... .REFRESH ON DEMAND WITH ROWID AS SELECT * FROM apps.fafg_assets When I create in OWB y

  • I can not select the project when I am creating a change using SM_CRM

    Hi !! My Project was checked and all verifications are green. But, when I enter in transaction SM_CRM, and I try to create a change, no projects are showed. I don´t know what is necessary to do. And, after this, I would like to define my maintanance