Poor Internet performance (ping, download, and upload) even wired directly to modem

I recently purchased a new iMac running OSX 10.8, and have been noticing exteremely poor internet performance compared to what I am used to with our internet connection. Running speedtests, I typically get results as follows:
Ping: 500-2500ms
Download: 2-3Mbps
Upload: 0.05-0.1Mbps
There more or less reflect the way web browsing feel. It takes forever for clicks to take effect, but content loading on pages is reasonable for most lightweight pages. As a comparison, running the same test on my Win 7 Dell laptop, I get more or less the advertised limits of my internet package:
Ping: 20-80ms
Download: 18-15Mbps
Upload: 0.4-0.6Mbps
To troubleshoot the issue, I wanted to ensure it was not the wireless connection or the router, so I disconnected the router and run an ethernet cord directly from the iMac to the router, and I got the same results. I then disconnected the router entirely and ran the cord directly to the cable modem, and again got the same results. Questioning whether it was an issue with the browser, I downloaded Chrome and again ran the test, only to get the same results.
Now I feel stuck. I know there is no issue with the cable modem or the connection coming to our home, but have no idea how to improve the performance of the computer. I would appreciate some tricks or tips to try and improve the performance on either a wired ethernet connection, or ideally on wireless.
Thanks in advance.

Triple-click anywhere in the line below to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.

Similar Messages

I have the Jetpack 4GLTE, what is the Mbps download and upload speeds for this device?

I have the Jetpack 4GLTE, what is the Mbps download and upload speeds for this device?

The avgrage real speed will be more in the area of 25 to 38 Mbps You would need to be in a strong signal area with high grade cell tower service and low customer use to even reach 50 Mbps.
From Verizon page. Just be aware that using the MiFi 6620L can cost a lot of money. And you can thank the device's fast performance for that. In my testing around the San Francisco Bay Area, rathe device delivered blazing-fast download speeds that nged between around 10Mbps to around 40Mbps. At those speeds, you can burn through 4GB of data in just less than an hour. Once you reach the cap, of course, you'll have to pay somewhere between $10 to $15 for each additional gigabyte, depending on the plan you sign up for.
For more information follow link: Verizon Ellipsis Jetpack MHS800L | Verizon Wireless

My download and upload speed is half that of my laptop

My download and upload speed is half that of my laptop. I looked on a forum and it suggested that the new version of IOS might solve the problem, but I have updated to the latest and it hasn't. It is erratic, and I have to move my ipad round to get a signal in some parts of the house, whereas the laptop works very fast right next to it.

Problem solved. The culprit is the VZ issued Actiontec Modem-Router-Access Point.
I have doubt from the beginning that the problem is caused by my wifi adapter b/c it has always performed very well from the start. Upon more research on the web, I see that there are a lot of people having the exact problem as I do with their FiOS internet. I found some users who solved the problem with the same solution so I decide to try the same.
When I switched to FiOS, I took away my Asus N router b/c the VZ supplied Actiontec is a N router and AP also. Now, I turn off wireless in the Actionteach and hook up my Asus N router to it to use it as the AP. Boom! Now I get the full provisioned 50/25 speed and then some with both wired and wireless (and, my upstairs office is getting 40/20 wirelessly when before it used to be only about 15/10 using the Actiontec AP). Turning off the Asus and turning the Actiontech wireless back on and the wireless drops back down to 25/15. So it is pretty clear to me that somehow the Actiontec is not performing the way it should.
(In the Asus N router, in additional to the option of setting the wireless mode to b, g, n, there is also an option to select the wireless speed of up to 11, 54, 72 or 150. When I select “Up to 72 Mbps”, I get the same wireless speed as when I use the Actiontec AP which is only about 25/15. When I set the Asus speed to “Up to 150” I get the full provisioned speed of 50/25. So I look into the Actiontec but there is no such option beside the option to configure the b, g, n modes.)
I don’t think they give me a bump unit of the Actiontec b/c this problem is rather widespread. So, either there is a problem with this entire line of model of Actiontec or that there is a setting (or settings) in it that prevent it from performing the way it should but I look and look and can’t find any relevant setting.

Download and upload zcl_class

how i can download and upload zcl_class??

I copied - created - and ran program YRS_CLASS_UPLOAD_XML to try to upload xml i got from the internet on utilizing the new alv object model named refactoring.zip. When I run this program to try to upload, I get an error on statement in a method of CL_XML_DOCUMENT where is does a select single LO_CLASS from BDS_LOCL into l_class. If does not find the following types in the table BDS_LOCL for C_BDS_CLASSNAME value of CL_XML_DOCUMENT and C_BDS_CLASSTYPE value of CL. Any help at this point?

My MBA keep downloading and uploading with no obvious reason?

Here is a link to the original post https://discussions.apple.com/thread/3015185
I will go crazy over this one! The problem started almost 10 days ago .
My Mac Book air keeps downloading and uploading KBs ranging from 2 KBsto 30 KBs Ups and Downs (see the attachment please ).
I'm living currently in Amman/Jordan and using Orange 3G+ USB dongle and InternetEverywhere software to connect (check the screen shot).
I also installed Protemac and there was no app I tracked which was the reasonbehind the constant download/upload during idle time .
I did everything; formatted and clean installed Os X , installed antivirus(nothing found ),checked the USB dongle with Windows 7 operating system and tomy surprise everything is fine .
I tried to reinstall the driver many times from http://www.orange.jo/en/software.php and again nothing has changed the same behavior again !
I called Orange tech support and they said if there is no problem with Windows 7 there is nothing that we can do .
What I have noticed is that when I connect to internet the Orange software only downoald 11 KBs and then stopped ,the preoblem start when I open a page on firefox or Safari and then after seconds the activity monitor start to regestier upload and downalod activity (both ways) ranging from 3 KBs ups and 3 KBs downn to 25 KBs Ups and 25 KBs down , this is just like a loop activity .
Should I leave this problem to eat all my bandwidth threshold ,is their something wrong with my MBA ( I hope not )
Please help me with this .

Here is a snap shot of CPA - Cocoa Packet Analyzer,the thing is that I don't know how to translate the packets being sent or received

My MBA keep downloading and uploading at idle time

I will go crazy over this one! The problem started almost 10 days ago .
My Mac Book air keeps downloading and uploading KBs ranging from 2 KBsto 30 KBs Ups and Downs (see the attachment please ).
I'm living currently in Amman/Jordan and using Orange 3G+ USB dongle and InternetEverywhere software to connect (check the screen shot).
I also installed Protemac and there was no app I tracked which was the reasonbehind the constant download/upload during idle time .
I did everything; formatted and clean installed Os X , installed antivirus(nothing found ),checked the USB dongle with Windows 7 operating system and tomy surprise everything is fine .
I tried to reinstall the driver many times from http://www.orange.jo/en/software.php and again nothing has changed the same behavior again !
I called Orange tech support and they said if there is no problem with Windows 7 there is nothing that we can do .
What I have noticed is that when I connect to internet the Orange software only downoald 11 KBs and then stopped ,the preoblem start when I open a page on firefox or Safari and then after seconds the activity monitor start to regestier upload and downalod activity (both ways) ranging from 3 KBs ups and 3 KBs downn to 25 KBs Ups and 25 KBs down , this is just like a loop activity .
Should I leave this problem to eat all my bandwidth threshold ,is their something wrong with my MBA ( I hope not )
Please help me with this .

Thanks Tuttle,
Any way I tried today Virus Barrier 6 and it here are some screen shot,it seems that my mac is keep sending or receiving packets from this ip 10.139.142.71 or 212.202.105.83
Thanks Tuttle ,
Here are another screen shots :
I tried to block those ips but nothing happened .

After hours of back-up, downloading and uploading...I am now updated with all the latest Mac software. However, I no longer have access to Excel and Word. Is there a way I can access my documents in either of those? Help, please.

After hours of back-up, downloading and uploading...I am now updated with all the latest Mac software. However, I no longer have access to Excel and Word. Is there a way I can access my documents in either of those? Help, please.

If you have older versions of excel and word that previously ran under the Rosetta emulator (allows PowerPC code to run on Intel system), they will no longer work with Lion.
You can use the Apple programs Pages and Numbers to access the files. They can be bought and downloaded from the App store. NeoOffice is available at http://www.neooffice.org/neojava/en/index.php which has Lion support. OpenOffice doesn't talk to Lion support, it's at http://www.openoffice.org/

PO header attachment download and upload

Hi All,
I have requirement to download the attachments attached at Purchase Orders(PO) header level . And then from the downloaded file , I further want to upload it to another target system.
I have already uploaded the PO at target system but header level attachments were missed out.
My source and target system is in Ver 4.6C
Please let me know -
1. All tables that are involved in storing the attachments at header level for purchase orders.With this I can upload attachments directly to the target system tables.
2.Any Function module for download and upload the attachments of PO at header level.
I will appreciate any help to do this .
Thanks
Deepak

Hi ,
Thanks for suggestion.I Have used FM SO_ATTACHMENT_INSERT to insert Attachment. SOOD table is getting updated. But still PO header level attachment is missing. I think FM only update the table SOOD and do not ensure to put the attachment to the right Purchase order.
Please let me know if you have an Idea how to put attachments to PO header level.Let me know tables that can be directly updated in order to attach the attachment to PO header level.
Thanks
Deepak

Hierarchy download and upload

Hi experts,
i want to download hierarchies from production bw to development bw. pls explain me the procedure how to do. as i understand hierarchies will be in the r/3 system. then how do i download them and upload them to the required box in bw. is there any function module for downloading and uploading hierarchies.
Pls help.....

Hello,
To execute the program you have to run it in transaction se38.
Check if you have it since it is Z you might not have it.
If you don't find it create in se38 a new program with the following code:
*& Report Z_SAP_HIERARCHY_DOWNLOAD                                    *
* SAP Consulting BW Tools:
* Download hierarchy into a flat file. The file has the correct format
* for uploading into BW via a hierarchy InfoSource (IDOC).
* (c) SAP AG 2003-2004 MFB, SAP Labs LLC
* created: 2003-07-23
* last update: 2004-05-02
* Text elements:
* P_DATES Include from/to dates
* P_DATETO Valid-to date
* P_FNAME File name
* P_HIENM Hierarchy name
* P_INTER Include from/to leaves
* P_IOBJNM InfoObject
* P_LANGU Language
* P_VERS Hierarchy version
REPORT z_sap_hierarchy_download.
TYPE-POOLS: rs, rsdm, rrh1.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
PARAMETERS:
p_iobjnm TYPE rsdiobjnm MEMORY ID rsc.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
PARAMETERS:
p_hienm TYPE rshiedir-hienm,
p_vers TYPE rshiedir-version,
p_dateto TYPE rshiedir-dateto,
p_langu TYPE rshiedirt-langu.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME.
PARAMETERS:
p_fname LIKE rlgrap-filename,
p_dates AS CHECKBOX DEFAULT 'X',
p_inter AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK b3.
* File structure
TYPES:
* No dates/intervals
BEGIN OF y_s_hierfile_1,
nodeid TYPE rshienodid,
iobjnm TYPE rsiobjnm,
nodename TYPE rsnodename,
* tlevel TYPE rstlevel,
link TYPE rslink,
parentid TYPE rsparent,
childid TYPE rschild,
nextid TYPE rsnext,
langu TYPE langu,
txtsh TYPE rstxtsh,
txtmd TYPE rstxtmd,
txtlg TYPE rstxtlg,
END OF y_s_hierfile_1,
y_t_hierfile_1 TYPE STANDARD TABLE OF y_s_hierfile_1,
* With dates
BEGIN OF y_s_hierfile_2,
nodeid TYPE rshienodid,
iobjnm TYPE rsiobjnm,
nodename TYPE rsnodename,
* tlevel TYPE rstlevel,
link TYPE rslink,
parentid TYPE rsparent,
childid TYPE rschild,
nextid TYPE rsnext,
dateto TYPE rsdateto,
datefrom TYPE rsdatefrom,
langu TYPE langu,
txtsh TYPE rstxtsh,
txtmd TYPE rstxtmd,
txtlg TYPE rstxtlg,
END OF y_s_hierfile_2,
y_t_hierfile_2 TYPE STANDARD TABLE OF y_s_hierfile_2,
* With intervals
BEGIN OF y_s_hierfile_3,
nodeid TYPE rshienodid,
iobjnm TYPE rsiobjnm,
nodename TYPE rsnodename,
* tlevel TYPE rstlevel,
link TYPE rslink,
parentid TYPE rsparent,
childid TYPE rschild,
nextid TYPE rsnext,
leafto TYPE rsleafto,
leaffrom TYPE rsleaffrom,
langu TYPE langu,
txtsh TYPE rstxtsh,
txtmd TYPE rstxtmd,
txtlg TYPE rstxtlg,
END OF y_s_hierfile_3,
y_t_hierfile_3 TYPE STANDARD TABLE OF y_s_hierfile_3,
* With dates/intervals
BEGIN OF y_s_hierfile_4,
nodeid TYPE rshienodid,
iobjnm TYPE rsiobjnm,
nodename TYPE rsnodename,
* tlevel TYPE rstlevel,
link TYPE rslink,
parentid TYPE rsparent,
childid TYPE rschild,
nextid TYPE rsnext,
dateto TYPE rsdateto,
datefrom TYPE rsdatefrom,
leafto TYPE rsleafto,
leaffrom TYPE rsleaffrom,
langu TYPE langu,
txtsh TYPE rstxtsh,
txtmd TYPE rstxtmd,
txtlg TYPE rstxtlg,
END OF y_s_hierfile_4,
y_t_hierfile_4 TYPE STANDARD TABLE OF y_s_hierfile_4.
* Hierarchy definition
DATA:
g_s_hiesel TYPE rsndi_s_hiesel,
g_s_hiedir TYPE rsndi_s_hiedir,
g_subrc TYPE sy-subrc,
g_t_hiedirt TYPE TABLE OF rshiedirt,
g_s_hierstruc TYPE rssh_s_htab,
g_t_hierstruc TYPE TABLE OF rssh_s_htab,
g_s_thiernode TYPE rsthiernode,
g_t_thiernode TYPE TABLE OF rsthiernode WITH KEY langu hieid objvers
nodename,
g_s_hierintvl TYPE rssh_s_jtab,
g_t_hierintvl TYPE TABLE OF rssh_s_jtab WITH KEY hieid objvers nodeid,
g_s_message TYPE rsndi_s_message,
g_t_message TYPE TABLE OF rsndi_s_message,
g_s_chavlinfo TYPE rsdm_s_chavlinfo,
g_t_chavlinfo TYPE rsdm_t_chavlinfo.
* File
DATA:
g_fname TYPE string,
g_struct_s TYPE string,
g_struct_t TYPE string,
gr_s_file TYPE REF TO data,
gr_t_file TYPE REF TO data.
FIELD-SYMBOLS:
<g_langu> TYPE ANY,
<g_s_file> TYPE ANY,
<g_t_file> TYPE STANDARD TABLE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_iobjnm.
CALL FUNCTION 'RSD_IOBJ_F4'
    EXPORTING
      i_show_cha    = rs_c_true
      i_objvers     = rs_c_objvers-active
      i_hietabfl    = rs_c_true
    CHANGING
      c_iobjnm      = p_iobjnm
    EXCEPTIONS
      illegal_input = 1.
CHECK sy-subrc = 0.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_hienm.
DATA:
l_s_hiertxt TYPE rrh1_s_hiertxt,
l_t_hiertxt TYPE rrh1_t_hiertxt.
CALL FUNCTION 'RRH1_HIERARCHY_HELP_VALUES_GET'
    EXPORTING
      i_iobjnm          = p_iobjnm
      i_dateto          = p_dateto
      i_hienm           = p_hienm
      i_version         = p_vers
    IMPORTING
      e_t_hiertxt       = l_t_hiertxt
    EXCEPTIONS
      no_f4_available   = 1
      dialogue_canceled = 2
      OTHERS            = 3.
CHECK sy-subrc = 0.
READ TABLE l_t_hiertxt INTO l_s_hiertxt INDEX 1.
CHECK NOT l_s_hiertxt IS INITIAL.
p_hienm = l_s_hiertxt-hienm.
DATA:
l_s_dynpfields TYPE dynpread,
l_t_dynpfields TYPE STANDARD TABLE OF dynpread.
CLEAR: l_t_dynpfields, l_s_dynpfields.
l_s_dynpfields-fieldname = 'P_VERS'.
WRITE l_s_hiertxt-version TO l_s_dynpfields-fieldvalue.
APPEND l_s_dynpfields TO l_t_dynpfields.
l_s_dynpfields-fieldname = 'P_DATETO'.
WRITE l_s_hiertxt-dateto TO l_s_dynpfields-fieldvalue.
APPEND l_s_dynpfields TO l_t_dynpfields.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
    EXPORTING
      dyname     = sy-repid
      dynumb     = sy-dynnr
    TABLES
      dynpfields = l_t_dynpfields.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
DATA:
l_filename1 TYPE string,
l_filename2 TYPE string,
l_path TYPE string,
l_fullpath TYPE string,
l_action TYPE i.
l_filename1 = p_fname.
CALL METHOD cl_gui_frontend_services=>file_save_dialog
EXPORTING
window_title = 'Select Download File'
default_extension = 'txt'
default_file_name = l_filename1
file_filter = 'All Files (*.*)|*.*|Text files (*.txt)|*.txt'
CHANGING
filename = l_filename2
path = l_path
fullpath = l_fullpath
user_action = l_action
EXCEPTIONS
cntl_error = 1
OTHERS = 2.                                               "#EC NOTEXT
CHECK sy-subrc = 0.
CALL METHOD cl_gui_cfw=>flush.
IF l_action = 0.
    p_fname = l_fullpath.
ENDIF.
INITIALIZATION.
GET PARAMETER ID 'RSC' FIELD p_iobjnm.
START-OF-SELECTION.
* Check input
CHECK NOT p_fname IS INITIAL.
IF p_langu IS INITIAL.
    p_langu = sy-langu.
ENDIF.
IF p_dateto IS INITIAL.
    p_dateto = '99991231'.
ENDIF.
* Read hierarchy
CLEAR g_s_hiesel.
g_s_hiesel-objvers = rs_c_objvers-active.
g_s_hiesel-hienm = p_hienm.
g_s_hiesel-version = p_vers.
g_s_hiesel-iobjnm = p_iobjnm.
g_s_hiesel-dateto = p_dateto.
CALL FUNCTION 'RSNDI_SHIE_STRUCTURE_GET'
    EXPORTING
      i_s_hiesel        = g_s_hiesel
      i_no_nodenm_table = rs_c_true
    IMPORTING
      e_s_hiedir        = g_s_hiedir
      e_subrc           = g_subrc
    TABLES
      e_t_hiedirt       = g_t_hiedirt
      e_t_hierstruc     = g_t_hierstruc
      e_t_thiernode     = g_t_thiernode
      e_t_hierintvl     = g_t_hierintvl
      e_t_message       = g_t_message.
IF g_subrc <> 0.
    READ TABLE g_t_message INTO g_s_message INDEX 1.
    IF sy-subrc = 0.
      MESSAGE ID g_s_message-msgid TYPE 'I' NUMBER g_s_message-msgno
      WITH g_s_message-msgv1 g_s_message-msgv2
      g_s_message-msgv3 g_s_message-msgv4.
    ELSE.
      MESSAGE ID 'RSBO' TYPE 'I' NUMBER 899
      WITH 'Hierarchy read error'.
    ENDIF.
    EXIT.
ENDIF.
* Defined output structures
IF p_dates IS INITIAL AND p_inter IS INITIAL.
    g_struct_s = 'Y_S_HIERFILE_1'.
    g_struct_t = 'Y_T_HIERFILE_1'.
ELSEIF p_dates = 'X' AND p_inter IS INITIAL.
    g_struct_s = 'Y_S_HIERFILE_2'.
    g_struct_t = 'Y_T_HIERFILE_2'.
ELSEIF p_dates IS INITIAL AND p_inter = 'X'.
    g_struct_s = 'Y_S_HIERFILE_3'.
    g_struct_t = 'Y_T_HIERFILE_3'.
ELSE.
    g_struct_s = 'Y_S_HIERFILE_4'.
    g_struct_t = 'Y_T_HIERFILE_4'.
ENDIF.
CREATE DATA gr_s_file TYPE (g_struct_s).
ASSIGN gr_s_file->* TO <g_s_file>.
CREATE DATA gr_t_file TYPE (g_struct_t).
ASSIGN gr_t_file->* TO <g_t_file>.
* Nodes
REFRESH <g_t_file>.
LOOP AT g_t_hierstruc INTO g_s_hierstruc.
    CLEAR <g_s_file>.
    MOVE-CORRESPONDING g_s_hierstruc TO <g_s_file>.
* Texts for nodes
    READ TABLE g_t_thiernode INTO g_s_thiernode WITH TABLE KEY
    langu = p_langu
    hieid = g_s_hierstruc-hieid
    objvers = rs_c_objvers-active
    nodename = g_s_hierstruc-nodename.
    IF sy-subrc = 0.
      MOVE-CORRESPONDING g_s_thiernode TO <g_s_file>.
    ELSE.
* Texts for characteristic values
      REFRESH g_t_chavlinfo.
      CLEAR g_s_chavlinfo.
      g_s_chavlinfo-c_chavl = g_s_hierstruc-nodename.
      APPEND g_s_chavlinfo TO g_t_chavlinfo.
      CALL FUNCTION 'RSD_CHAVL_READ_ALL'
        EXPORTING
          i_iobjnm                  = g_s_hierstruc-iobjnm
          i_langu                   = p_langu
          i_dateto                  = p_dateto
          i_check_value             = space
          i_sid_in                  = space
          i_hieid                   = g_s_hiedir-hieid
          i_objvers                 = g_s_hiedir-objvers
        CHANGING
          c_t_chavlinfo             = g_t_chavlinfo
        EXCEPTIONS
          info_object_not_found     = 1
          routines_generation_error = 2
          check_table_not_existing = 3
          text_table_not_existing   = 4
          OTHERS                    = 5.
      IF sy-subrc = 0.
        READ TABLE g_t_chavlinfo INTO g_s_chavlinfo INDEX 1.
        IF sy-subrc = 0.
          MOVE-CORRESPONDING g_s_chavlinfo-e_chatexts TO <g_s_file>.
          ASSIGN COMPONENT 'LANGU' OF STRUCTURE <g_s_file> TO <g_langu>.
          IF sy-subrc = 0.
            <g_langu> = p_langu.
          ENDIF.
        ENDIF.
      ENDIF.
    ENDIF.
* Intervals
    IF g_s_hierstruc-intervl = 'X' AND p_inter = 'X'.
      READ TABLE g_t_hierintvl INTO g_s_hierintvl WITH TABLE KEY
      hieid = g_s_hierstruc-hieid
      objvers = rs_c_objvers-active
      nodeid = g_s_hierstruc-nodeid.
      IF sy-subrc = 0.
        MOVE-CORRESPONDING g_s_hierintvl TO <g_s_file>.
      ENDIF.
    ENDIF.
    APPEND <g_s_file> TO <g_t_file>.
ENDLOOP.
* Download output table
g_fname = p_fname.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      filename                = g_fname
      write_field_separator   = space
    TABLES
      data_tab                = <g_t_file>
    EXCEPTIONS
      file_write_error        = 1
      no_batch                = 2
      gui_refuse_filetransfer = 3
      invalid_type            = 4
      no_authority            = 5
      unknown_error           = 6
      header_not_allowed      = 7
      separator_not_allowed   = 8
      filesize_not_allowed    = 9
      header_too_long         = 10
      dp_error_create         = 11
      dp_error_send           = 12
      dp_error_write          = 13
      unknown_dp_error        = 14
      access_denied           = 15
      dp_out_of_memory        = 16
      disk_full               = 17
      dp_timeout              = 18
      file_not_found          = 19
      dataprovider_exception = 20
      control_flush_error     = 21
      OTHERS                  = 22.
IF sy-subrc = 0.
    MESSAGE ID 'RSBO' TYPE 'I' NUMBER 899
    WITH 'Hierarchy download successful!'.
ELSE.
    MESSAGE ID sy-msgid TYPE 'I' NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Diogo

Function module to choose the file for download and upload

what is the function module to choose the file for download and upload for presentation server.
give me with example

Please search in SCN.
This has been discussed so many times.

Download and Upload smartform in 4.6c

I have the requirement to download and upload the smartforms in 4.6c. I need the help, which standard function module will solve the problem.
Thanks .
Vinayak.

Hi,
Use Transaction "Smartforms" -->Enter Smartform Name
-> Utilities> Download form
This will down load smartform in XML format.
Use the Utilities--> Upload for upload the form .
Please sure the upload file is in XML format.
Hope this will help you.
Lanka

Download and Upload(!) ABAP-Source and DDIC-Objects?

Hi,
is there a standard transaction or third party tool
to download and upload(!!) ABAP-Source (function modules,
function groups, module pools, reports...) and DDIC-Objects
(tables, structures, data elements) to a local file system?
In terms of uploading these objects it would be desirable
that the transaction/tool creates packages/development classes/.. on its own.
I would need that to copy the same source and ddic-objcets to different customer systems without doing it "manually" everytime.
Does anyone know advice?
Thank you,
Bernhard

Hi Bernd,
look here :
Re: how to download pf-status and upload in another system
Andreas

Download and upload of file to server dir (AL11)

Hello,
I have a custom program that is downloading files from application server directory (they are like templates) to user local pc. User is then modifying such files and finally upload them in another AS directory.
The program is currently making use of FM's C13Z_FILE_DOWNLOAD_BINARY and C13Z_FILE_UPLOAD_BINARY.
There was no problem until hot packages have been implemented: now such FM's are returning an error saying:
Internal program error; (YDOWNLOAD SAPLC13Z 0 C13Z_RAWDATA_WRITE)
When in debug, it appears that the FM C13Z_RAWDATA_WRITE (called by the above mentioned FM's) is checking the calling program (sy-cprog) and if this latter is not within a list of standard programs (hardcoded), then the error is thrown.
My question is: Is there another way to download and upload files without such error? Could you please share the code?
Thanks a lot for help and suggestions!
Best regards,
JFlanders

Hello,
Please see note 1809258 - Internal program error; ( <program name> SAPLC13Z 0 C13Z_RAWDATA_READ )
A possibile solution is to use cl_gui_frontend_services class methods like gui_download and gui_upload, for instance:
TYPES: t_line(1) type x.
DATA: i_tab TYPE STANDARD TABLE OF t_line,
    i_wa(1) type x.
OPEN DATASET lv_file_appl FOR INPUT IN BINARY MODE.
DO.
CLEAR i_wa.
READ DATASET lv_file_appl INTO i_wa.
IF SY-SUBRC <> 0.
    EXIT.
ELSE.
    APPEND i_wa TO i_tab.
ENDIF.
ENDDO.
CLOSE DATASET lv_file_appl.
DATA: lv_fn TYPE string.
lv_fn = lv_file_name.
CALL METHOD cl_gui_frontend_services=>gui_download
EXPORTING
    filename                = lv_fn
    filetype                = 'BIN'
    append                  = ' '
CHANGING
    data_tab                = i_tab
EXCEPTIONS
    file_write_error        = 1
    no_batch                = 2
    gui_refuse_filetransfer = 3
    invalid_type            = 4
    no_authority            = 5
    unknown_error           = 6
    header_not_allowed      = 7
    separator_not_allowed   = 8
    filesize_not_allowed    = 9
    header_too_long         = 10
    dp_error_create         = 11
    dp_error_send           = 12
    dp_error_write          = 13
    unknown_dp_error        = 14
    access_denied           = 15
    dp_out_of_memory        = 16
    disk_full               = 17
    dp_timeout              = 18
    file_not_found          = 19
    dataprovider_exception = 20
    control_flush_error     = 21
    OTHERS                  = 24.
* old functioanlity
*    CALL FUNCTION 'C13Z_FILE_DOWNLOAD_BINARY'
*      EXPORTING
*        i_file_front_end       = lv_file_name
*        i_file_appl            = lv_file_appl
*        i_file_overwrite       = 'X'
** IMPORTING
**    E_FLG_OPEN_ERROR          = false
**    E_OS_MESSAGE              = lv_message
*    EXCEPTIONS
*      fe_file_open_error       = 1
*      fe_file_exists           = 2
*      fe_file_write_error      = 3
*      ap_no_authority          = 4
*      ap_file_open_error       = 5
*      ap_file_empty            = 6
*      OTHERS                   = 7
This is for the download, similarly should be done for the upload.
Hope this could help. Let me know if further details are needed.
Thank you and bye,
Flavio

Download and upload program

Hello to everybody,
I'm looking for a standard program that can download and upload program' source codes. I found the program REPTRAN (in SAP release 6.0) that can only download the source code (with the include as well), but i didn't find the upload one.
So, does anyone knows if exist a standard program that can download source codes (comprensive of include) and upload it as well?
Thanks and bye..

Hi,
Here is code which read the Programs & download:
Here Just pass the itab "SOURCE" into WS_DOWNLOAD.
function zuplt01f_tr.
*"*"Local interface:
*" IMPORTING
*"     REFERENCE(PROGRAM_NAME) TYPE SYREPID
*" TABLES
*"      SOURCE
data: f(240) type c,
        g type i,
        h(72) type c,
        low type i   .
read report program_name into source . " state 'A'.
describe table source lines count.
endfunction.
Raja T

Download and Upload Modulepool program

hai all,
Could any one say how to Download and Upload Modulepool program from sap.
Thanks,
Jeevan.

Hi Puduru
Welcome to ABAP forums.
If you just want to export Module pool program once, you can use transaction SE80 and menu point Utilities->More Utilities->Upload/Download->Download option ( for each include / component ).
Save it as a text file and then repeat the same process.
Here's other programs for the same functionality. You can use one of them.
http://www.members.tripod.com/abap4/Upload_and_Download_ABAP_Source_Code.html
http://sap.ittoolbox.com/code/d.asp?d=1623&a=s
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/finding your code in bsp applications.article
http://www.geocities.com/rmtiwari/Resources/Utilities/WebViewer.html
http://www.dalestech.com/
Dont forget to rewards pts, if it helps ;>)
Regards,
Rakesh

Poor Internet performance (ping, download, and upload) even wired directly to modem

Similar Messages

Maybe you are looking for