Poor Internet speed, TC 535kbps but through WAG300N 6654kbps

Ok so I took the plunge and purchased a new TC 1TB yesterday and after going through the Airport Utility setup process everything seems to be working apart from the very poor internet speed when connecting via the TC > WAG300N.
Linksys WAG300N Download-6654kbps / Upload-355kbps
Apple Time Capsule Download-535kbps / Upload-348kbps
_*TC details*_
Status: Normal (Green)
Version: 7.5.1
_*Internet Connection*_
Connect Using: Ethernet
Ethernet WAN Port: Automatic (Default) +*I have tried all the options with this setting*+
Connection Sharing: Share a public IP address +*I have also tried the "Off (Bridge Mode) setting*+
TCP/IP
IP Address: I have set manual
Router address: Points to my WAG300N
DNS Server(s): This is set to my WAG300N +*I have tried the DNS addresses from my ISP which still result in the 535kbps Download speed*+
I have tried different Cat cables and different ethernet slots from the TC WAN to the WAG300N, I have also connected my MacBook with an ethernet cable directly to the TC. The hardwired connection still gave me the same speed test results.
I hope I have listed all the information that someone might need to help me out. If you need any further details just shout and I will post them.
One last thing, could this be a faulty Time Capsule?

Good News
I borrowed my father-in-law's old 3COM modem/router to test out my feeling that the ethernet ports on my WAG300N were not playing ball.
I'm now a very happy bunny! setting the 3COM in Bridge Mode and using PPPoE on the Time Capsule I have my MacBook and iPhone the wife's XP laptop and BlackBerry all running through the Time Capsule
My speeds are now as they should be:
[img]http://www.mybroadbandspeed.co.uk/results/25514591.png[/img]
Message was edited by: Pongify

Similar Messages

  • Poor internet speed getting slower

    The area i live in has a very poor internet speed however in the last couple of months it has got significantly slower, where web pages arent evening loading and streaming is getting near impossible
    BT call centre suggested leaving it an hour, then a day then a few days and they would 'fix' something. No change ever happens after these calls and leaving the internet unused for days at a time is getting unacceptable

    ADSL line status
    Connection information
    Line state
    Connected
    Connection time
    0 days, 0:11:29
    Downstream
    1,280 Kbps
    Upstream
    448 Kbps
    Line state
    Connected
    Connection time
    0 days, 0:11:29
    Downstream
    1,280 Kbps
    Upstream
    448 Kbps
    ADSL settings
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    ITU-T G.992.1
    Latency type
    Interleaved
    Noise margin (Down/Up)
    8.2 dB / 15.0 dB
    Line attenuation (Down/Up)
    63.0 dB / 31.5 dB
    Output power (Down/Up)
    15.9 dBm / 12.3 dBm
    Loss of Framing (Local)
    0
    Loss of Signal (Local)
    0
    Loss of Power (Local)
    0
    FEC Errors (Down/Up)
    145 / 0
    CRC Errors (Down/Up)
    4 / N/A
    HEC Errors (Down/Up)
    N/A / 0
    Error Seconds (Local)
    4
    Download Speed(mbps) 0.97
    upload speed 0.24
    ping latency ms 0.00

  • Poor internet speed with time capsule or Airport extreme

    I'm trying to find away to increase the throughput of my 1st generation tme capsule. i'm getting a 33% drop in speed over wireless compared to wired conncetions.
    current setup
    Virginmedia XXL broadband  100Mbit down  5Mbit up.
    Modem standard virginmedia modem (not the superhub) connected to Apple time capsule (500Mb) @ 1000Mbit full duplex
    time capsule reset to default and then configured to use 5Ghz band, channel 36 . (no other networks in the area using this band) tested using wifi scanner and istumbler
    tested down/up speed using www.vmspeed.com
    wired connection
    105Mb/sec download   4.9Mb/sec upload
    wireless connection
    73.14Mb/sec download   4.7Mb/sec upload
    i have tried testing with an airport extreme 3rd Gen with the same setup and get the same results.
    Tested using a 2008 Macbook running Lion 10.7.3 and also tested using 2010 Macbook unibody running snow leopard 10.6.8. both laptops connecting to wireless network at 270Mb/sec and are both exhibiting the same drop in speed over wireless. only one laptop connected to the network at a time.
    is thier a limit to the time capsule/airport extreme wireless throughput?

    Further to Bob's comments..
    A Gen1 TC will be using marvel wireless chip and your 2008 and 2010 Macbook will use atheros and/or broadcom cards.. Just open your system profiler and look for info on the airport. We find the mixture of wireless chipsets especially older draft N and later N products can give very varied results.
    The very fact you are linking at 270 and not 300mbps shows some reduction from theoretical max speed.. and really to get over 100mbps with any wireless you need perfect setup.. matched wireless chips etc.
    Do a test uploading and downloading a file to the TC to see if the LAN speed is better than internet speed.
    In reality I think you are doing especially well.. we see loads of people complaining about slow internet here who are getting less than 10% of the speed they get direct when routed through the TC. And on most occasions the limit in speed is not really going to affect what you do, as the real links to the internet are not that fast.

  • Poor internet speeds, unacceptable?

    Hello I have been a sky customer for many years but in the past 6 months I have almost un-usable internet connection. I would like to play my games consoles, pc and stream movies online aswell  as using RFID to communicate with friends but I cant with my internet speeds?I am getting on average:Ping: 50ms Download Speed: 8mbpsUpload Speed: 0.6mbps (Wired and Wireless)Also the internet connection drops 1-2 times per day...Despite trying all 13 WAP channels and moving the router to many places around the house i still have had no luck - I am now using a 3m ethernet cable from the microfilter to get better connection on my devices.I was wondering if anyone could help me resolve these issues as these are not the speeds I promised, is it something that can be fixed or do I require a sky engineer? Also I am using the most up-to-date hardware as provided by sky

    The speeds you should be seeing are as I put in my last post; it should be around 10Mbps download and around 0.7Mbps upload based on your connection stats.
    With regard to iCloud/Google backups, it would only need one device to start backing up photos or music, for example, to saturate that 0.7Mbps upload speed. This, in turn, would affect the download speed for all devices as they need to be able to send packets of information as well as receive them.
    First thing I'd suggest is that, next time it happens, have a quick check of the iPad and any Android devices and make sure they aren't backing up. If they are, disconnect them and see if things improve.
    If the issue persists, you'll need to contact Sky via the channels below to report the fault. 
    https://contactus.sky.com/uk

  • Slow internet speed on Mac, but not on iPad

    So, I've just tested my internet speed on my Mac and I got  very low results. I also ran the test on my iPad and got the full and regular speed. I noticed that indeed the internet is faster on my iPad. This wasn't happening at all, not that I can remember. Is my Mac's network card damaged or something?

    Please answer as many of the following questions as you can.
    Restart your router and your broadband device, if they're separate. Any change?
    If you can connect to more than one network, are they all slow?
    Are all network applications slow, or only some? If only some, which ones?
    Is networking always slow, or only sometimes?
    Disconnect all other devices from the network. Any change?
    Boot in safe mode and test. Any difference?

  • I have Internet speed 1 GB but Time Capsule last generation is share wifi maximum speed 200 Mb.

    I have a TC ME177/LL/A and an Internet speed of 1 GB. My TC is working on WiFi with maximum speed of 200 Mb. Is anybody which has same problem and fix it?

    You cannot get even close to your 1GB speed with an Apple router.. that are just not fast enough even on ethernet.. on wireless you can expect a very substantial drop.. 200Mbps is hugely fast internet for wireless to a router.. and that does indicate an actually connection speed (link rate) of something in the order of 600-800Mbps.. wireless is also another form of politics.. it is how to tell lies.. and when found out.. tell even bigger ones to cover it up.

  • I have rented a movie on atv and it starts playing for 5 minutes then has been loading for over 12 hours, changed from hd to sd my internet speed seems ok, but running out of time to watch it. Any suggestions?

    I have rented a movie from itunes on my atv last night about 8pm.  started watching shortly thereafter, it stopped and said loading...it is still loading, now almost out of time to watch.  I read some suggestions about changing hd to sd in settings, and I did.  I admit I am so ignorant about all of this, but if anyone can offer something else, it would be greatly appreciated. Thanks, vic365

    I also had terrible issues with 2 Wire Gateway and my mid-2010 MacBook Pro.  We changed to WPA2 and that seems to have fixed the problem.  The AT&T tech support person, Phillipines, was extremely helpful.  She went through network settings with me.  One interesting step was going into my DNS tab (Network Preferences and then Advanced Button) and replacing my entries with these:
    68.94.156.1
    68.94.157.1
    It's been several days and I've only seen a few random packet drops.  Still charging along at full signal strength.

  • Poor internet speeds in Singapore

    Hi all
    We have a vpn to a site in Singapore, we experience slow speeds and even dropouts sometimes at certain times of the day!
    Is the internet in Singapore well known for being slow, Is there a high contention ratio or something ?
    cheers
    Carl

    Carl, 
    Singapore is an IT "power house" of Asia.   You will need to look closely at your router, line errors, load, etc.  SingTel technicians are very good.  

  • Poor internet speed over airport

    my daughters 20 in ch 1.8 Ghz iMac G5 is incredibly slow over airport.  It has the built in aircard and is running off a Linksys B/G router.  it is the only machine pulling from that router most of time, sometimes the Wii runs off that router.  The connection is usually 3-4 bars, but the speed is miserable.  The aircard only sees 3 networks, however sitting my MacBook next to it, I can pick up 7-8 networks (3 are in our house.)
    Is the reception just generally this bad on an iMac? Anything I can do to help it?  wrap it in aluminum foil...

    See KB Articles:  http://support.apple.com/kb/HT1401 AirPort troubleshooting guide 
    http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
    ============================ 
    System Preferences>Network Click the Assist Me button.
    In the next window that pops up, click the Diagnostic button & do the necessary. 
    ===================== 
    If using Linsys router contact LinkSys Customer Support and/or post in their forums.
    wrap it in aluminum foil...
    That only works if you attach the rabbit ears antenna.

  • Poor internet speed over wireless

    We just signed up for a new ADSL2+ plan, and received a wireless router along with it (an Open Networks iConnect Access 624W), which came pre-configured for our ISP (Internode).
    My housemate (who has a 17" iMac G5), had no problems finding the router and is getting around 1.5MB down a second. I, on the other hand am getting anywhere from 130kB a second, down to 0. It's slow, and very very patchy. And it's getting worse. (this morning, I struggled to download a 700kb file).
    I tried to re-setup the airport settings multiple times to no avail. I've checked to see I've run all software updates (I have).
    It's weird, it's not like it isn't connecting. I can at least bring up something, albiet very slowly, and I can see the other iMac via bonjour. I just can't get the same internet performance.
    The router is placed pretty much dead centre between the two iMacs too (just in the hall between the rooms). Can't be more than 3m away from the computer.
    Is there anything I can do to narrow down the issue?
    Could there be something wrong with my Airport Extreme card?
    Thanks in advance

    Welcome to the discussions!
    It certainly is possible that there is a hardware problem, but it is more likely that it is in the settings somewhere. Have you checked to see that the settings in the two Macs match? I would make sure that Airport is listed first in the connections and also be sure to have IPv6 turned off. Those are two things that I have found can make a difference in the performance.

  • Why is my internet speed is fast, but webpages (facebook, google search) load slowly.

    This is a persisting problem. Restarting/reinstalling firefox seems to fix it for a short time but it always comes back. The same problem happens in chrome and firefox on my desktop but not on my laptop or smart phone. I've tried switching anti virus software and servers but neither helped. Other Options?

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • Poor internet connection over wireless router

    We have a modem and wireless router setup in our house. The PC Laptop connects wirelessly and gets a fair internet speed. The Mac Laptop on wireless however gets a very very poor internet speed over the network. Any ideas why this is so?
    The speed increases a bit when I hook the mac laptop directly up to the modem via cable, but the wireless is the problem...
    thx

    lots of questions need answers.
    name of provider?
    the speed you signed for?
    cable or DSL or ?
    modem is older or not?
    firmware update required?
    router model?
    firmware update required?
    at least start here.

  • Slow Internet speed, please help!!

    Hi for the past month or so I've beeing getting really poor internet speeds, I've rang BT and they did some tests and I saw some kind of improvement for a little while, but now its gone back to being slow again. Please can anyone help or suggest how I can get the speed improved or resloved totally. I used to get 5Mbps minimum anytime of the day!!
     See screens below
    Thanks
    George
    Solved!
    Go to Solution.

    This the only kind of log I can find. under 'security log' it doesn't mention crc hec or error sound anywhere 
    Aug 27 14:08:57 (none) daemon.info udhcpd[348]: received DISCOVER
    Aug 27 14:08:59 (none) daemon.info udhcpd[348]: sending ACK to 192.168.2.2
    Aug 27 14:08:59 (none) daemon.info udhcpd[348]: check_conf_ip_assign s Mon Aug 27 14:08:59 2012
    Aug 27 14:09:03 (none) daemon.info udhcpd[348]: check_conf_ip_assign d Mon Aug 27 14:09:03 2012
    Aug 27 14:09:03 (none) daemon.info udhcpd[348]: sending OFFER of 192.168.2.41
    Aug 27 14:09:03 (none) daemon.info udhcpd[348]: received REQUEST
    Aug 27 14:09:03 (none) daemon.info udhcpd[348]: sending ACK to 192.168.2.41
    Aug 27 14:09:03 (none) daemon.info udhcpd[348]: check_conf_ip_assign s Mon Aug 27 14:09:03 2012
    Aug 27 14:09:03 (none) daemon.info udhcpd[348]: check_conf_ip_assign e Mon Aug 27 14:09:03 2012
    Aug 27 14:09:03 (none) daemon.info udhcpd[348]: sending ACK to 192.168.2.41
    Aug 27 14:09:28 (none) daemon.err nmbd[563]: [2012/08/27 14:09:28, 0] nmbd/nmbd_become_lmb.c:become_local_master_stage2(396)
    Aug 27 14:09:28 (none) daemon.err nmbd[563]: *****
    Aug 27 14:09:28 (none) daemon.err nmbd[563]:
    Aug 27 14:09:28 (none) daemon.err nmbd[563]: Samba name server ROUTER is now a local master browser for workgroup WORKGROUP on subnet 192.168.2.1
    Aug 27 14:09:28 (none) daemon.err nmbd[563]:
    Aug 27 14:09:28 (none) daemon.err nmbd[563]: *****
    Aug 27 14:09:28 (none) daemon.err nmbd[563]: [2012/08/27 14:09:28, 0] nmbd/nmbd_become_lmb.c:become_local_master_stage2(396)
    Aug 27 14:09:28 (none) daemon.err nmbd[563]: *****
    Aug 27 14:09:28 (none) daemon.err nmbd[563]:
    Aug 27 14:09:28 (none) daemon.err nmbd[563]: Samba name server ROUTER is now a local master browser for workgroup WORKGROUP on subnet 192.168.169.1
    Aug 27 14:09:28 (none) daemon.err nmbd[563]:
    Aug 27 14:09:28 (none) daemon.err nmbd[563]: *****
    Aug 27 14:09:28 (none) daemon.err nmbd[563]: [2012/08/27 14:09:28, 0] nmbd/nmbd_become_lmb.c:become_local_master_stage2(396)
    Aug 27 14:09:28 (none) daemon.err nmbd[563]: *****
    Aug 27 14:09:28 (none) daemon.err nmbd[563]:
    Aug 27 14:09:28 (none) daemon.err nmbd[563]: Samba name server ROUTER is now a local master browser for workgroup WORKGROUP on subnet 192.168.5.17
    Aug 27 14:09:28 (none) daemon.err nmbd[563]:
    Aug 27 14:09:28 (none) daemon.err nmbd[563]: *****
    Aug 27 14:10:49 (none) daemon.info udhcpd[348]: received REQUEST
    Aug 27 14:10:49 (none) daemon.info udhcpd[348]: received DISCOVER
    Aug 27 14:10:51 (none) daemon.info udhcpd[348]: sending ACK to 192.168.2.2
    Aug 27 14:10:51 (none) daemon.info udhcpd[348]: check_conf_ip_assign s Mon Aug 27 14:10:51 2012
    Aug 27 14:10:52 (none) user.notice igmp[568]: igmp:IP_ADD_MEMBERSHIP Failed
    Aug 27 14:10:53 (none) daemon.info udhcpd[348]: check_conf_ip_assign d Mon Aug 27 14:10:53 2012
    Aug 27 14:10:53 (none) daemon.info udhcpd[348]: sending OFFER of 192.168.2.10
    Aug 27 14:10:53 (none) daemon.info udhcpd[348]: received DISCOVER
    Aug 27 14:10:53 (none) daemon.info udhcpd[348]: sending ACK to 192.168.2.10
    Aug 27 14:10:53 (none) daemon.info udhcpd[348]: check_conf_ip_assign s Mon Aug 27 14:10:53 2012
    Aug 27 14:10:53 (none) daemon.info udhcpd[348]: check_conf_ip_assign d Mon Aug 27 14:10:53 2012
    Aug 27 14:10:53 (none) daemon.info udhcpd[348]: sending OFFER of 192.168.2.10
    Aug 27 14:10:53 (none) daemon.info udhcpd[348]: received REQUEST
    Aug 27 14:10:53 (none) daemon.info udhcpd[348]: sending ACK to 192.168.2.10
    Aug 27 14:10:53 (none) daemon.info udhcpd[348]: check_conf_ip_assign s Mon Aug 27 14:10:53 2012
    Aug 27 14:10:53 (none) daemon.info udhcpd[348]: check_conf_ip_assign e Mon Aug 27 14:10:53 2012
    Aug 27 14:10:53 (none) daemon.info udhcpd[348]: sending ACK to 192.168.2.10
    Aug 27 14:10:58 (none) daemon.info udhcpd[348]: DHCPINFORM
    Aug 27 14:11:27 (none) user.notice igmp[568]: igmp:IP_ADD_MEMBERSHIP Failed
    Aug 27 14:18:00 (none) daemon.info dnsmasq[338]: reading /etc/hosts
    Aug 27 14:18:00 (none) daemon.info dnsmasq[338]: reading /tmp/resolv.conf
    Aug 27 14:18:00 (none) daemon.info dnsmasq[338]: using nameserver 213.120.234.34
    Aug 27 14:18:06 (none) daemon.notice pppd[566]: PPPoE disconnected
    Aug 27 14:18:06 (none) daemon.info pppd[566]: Exit.
    Aug 27 14:18:06 (none) daemon.info pppd[566]: Exit.
    Aug 27 14:18:13 (none) daemon.info wanstatus[607]: Internet Status: Not Connected
    Aug 27 14:18:13 (none) daemon.notice pppd[4900]: PPPoE 2.4.1 started by root, uid 0
    Aug 27 14:18:58 (none) daemon.info dnsmasq[338]: reading /etc/hosts
    Aug 27 14:18:58 (none) daemon.info dnsmasq[338]: reading /tmp/resolv.conf
    Aug 27 14:18:58 (none) daemon.info dnsmasq[338]: using nameserver 213.120.234.62
    Aug 27 14:18:58 (none) daemon.info dnsmasq[338]: using nameserver 213.120.234.34
    Aug 27 14:19:02 (none) daemon.info wanstatus[607]: Internet Status: Connected
    Aug 27 15:02:41 (none) daemon.info udhcpd[348]: DHCPINFORM
    Aug 27 15:31:16 (none) daemon.info udhcpd[348]: received DISCOVER
    Aug 27 15:31:18 (none) daemon.info udhcpd[348]: sending ACK to 192.168.2.2
    Aug 27 15:31:18 (none) daemon.info udhcpd[348]: check_conf_ip_assign s Mon Aug 27 15:31:18 2012
    Aug 27 15:31:20 (none) daemon.info udhcpd[348]: check_conf_ip_assign d Mon Aug 27 15:31:20 2012
    Aug 27 15:31:20 (none) daemon.info udhcpd[348]: sending OFFER of 192.168.2.13
    Aug 27 15:31:20 (none) daemon.info udhcpd[348]: received DISCOVER
    Aug 27 15:31:20 (none) daemon.info udhcpd[348]: sending ACK to 192.168.2.13
    Aug 27 15:31:20 (none) daemon.info udhcpd[348]: check_conf_ip_assign s Mon Aug 27 15:31:20 2012
    Aug 27 15:31:20 (none) daemon.info udhcpd[348]: check_conf_ip_assign d Mon Aug 27 15:31:20 2012
    Aug 27 15:31:20 (none) daemon.info udhcpd[348]: sending OFFER of 192.168.2.13
    Aug 27 15:31:20 (none) daemon.info udhcpd[348]: received REQUEST
    Aug 27 15:31:20 (none) daemon.info udhcpd[348]: sending ACK to 192.168.2.13
    Aug 27 15:31:20 (none) daemon.info udhcpd[348]: check_conf_ip_assign s Mon Aug 27 15:31:20 2012
    Aug 27 15:31:20 (none) daemon.info udhcpd[348]: check_conf_ip_assign e Mon Aug 27 15:31:20 2012
    Aug 27 15:31:20 (none) daemon.info udhcpd[348]: sending ACK to 192.168.2.13
    Aug 27 15:34:45 (none) daemon.info udhcpd[348]: received REQUEST
    Aug 27 15:34:45 (none) daemon.info udhcpd[348]: sending ACK to 192.168.2.41
    Aug 27 15:34:45 (none) daemon.info udhcpd[348]: check_conf_ip_assign s Mon Aug 27 15:34:45 2012
    Aug 27 15:34:45 (none) daemon.info udhcpd[348]: check_conf_ip_assign e Mon Aug 27 15:34:45 2012
    Aug 27 15:34:45 (none) daemon.info udhcpd[348]: sending ACK to 192.168.2.41
    Aug 27 15:56:48 (none) daemon.info httpd[12955]: 192.168.2.10 login success
    Aug 27 16:14:27 (none) daemon.info udhcpd[348]: received REQUEST
    Aug 27 16:14:27 (none) daemon.info udhcpd[348]: sending ACK to 192.168.2.10
    Aug 27 16:14:27 (none) daemon.info udhcpd[348]: check_conf_ip_assign s Mon Aug 27 16:14:27 2012
    Aug 27 16:14:28 (none) daemon.info udhcpd[348]: check_conf_ip_assign e Mon Aug 27 16:14:28 2012
    Aug 27 16:14:28 (none) daemon.info udhcpd[348]: sending ACK to 192.168.2.10
    It's a belkin Play Router
    http://www.shop.bt.com/products/belkin-play-wireless-nn--bt-adsl-modem-router-6P61.html

  • Loss of internet speed using EA2700

    Hello,
    So I setuped my network as follows.
    one Linksys Ea2700 model is the DHCP server and connects via PPPOE to my ISP and another 2 routers ( same model) connected to the router.
    Now if I connect directly with my computer ( Asus G series laptop with Windows 8 installed on him) I get the full 100 Mbps connection the ISP promised.
    Connected to the internet behind the router I get a speed loss to 40 Mbps wired connection and about 27 Mbps wireless connection.
    If I connect behind one the second routers I use as access points the speed is at about 9 Mbps wired connection and 8 Mbps wireless connection.
    I've tried disabling the router firewall protection but it only made things worse. Thou It felt a bit faster as someone suggested I couldn't use the internet properly ( the pages weren't loading but oddly If i could manage to download something it had a decent speed).
    Also connected through one of the second routers I have a CCTV recording device that also streams to the internet ( with a setuped DDNS ) and it works properly. If I disabled the stream I couldn't notice much of a internet speed increase.
    As a final note I already read this thread http://community.linksys.com/t5/Wireless-Routers/EA2700-wired-speed-issue-worst-expensive-router-i-e...
    Incidently me and him have the same ISP.
    So my questions are:
    How do I decrease this internet speed loss that passes through the routers?
    Is changing any of the routers neccesary? According to the specs these routers should be working fine.

    Hi dkey89,
      Media prioritization should be set to 0 kbps for Downstream Bandwidth and Upstream Bandwidth. See illustration below: 

  • 10.4.9 and internet speed

    I am being told by my internet provider (charter) that they are getting many calls about poor internet speed w/ mac users after the 10.4.9 upgrade. my internet speed are really back after the upgrade. has anyone heard of this and if so how to fix it?

    A few things to try, with no guarantees:
    * Visit sites such as http://www.macfixit.com and http://www.macintouch.com to see if others have reported the problem and/or workarounds/fixes.
    * Run Disk Utility and "fix permissions", and "verify disk".
    * Run Activity Monitor and see if any obvious culprits are shown - CPU utilization way too high, constant disk activity, constant paging, unexplained network activity (or lack of it), etc.
    * Download and install the "combo" 10.4.9 updater.
    * If you know what to look for, look at the network settings and see if they make sense.
    * Do you have a PC or a Mac running 10.4.8 to use as a control sample?
    Doug

Maybe you are looking for

  • Can I choose an exchange for a new line if equidis...

    Hi, We are considering purchasing a new build property in the KA6 5HB postcode. The sales centre at the property has two phone connections - one from the Prestwick exchange, and one from the Annbank exchange. The postcode for the sales centre is KA6

  • How do I change my default search engine in Safari?

    I would like to change my default search engine other than the options that's given in the Preferences. Does anyone know how to?

  • Fade-off with MSI T-128 (nVidia geForce FX 5200) PCI card

    Hi I'm totally fade-off with nVidia GeForce FX 5200 (MSI -T128) graphics PCI card. I've tried all options found on different forums and also with latest driver for the card both from MSI and nVidia. But non of these are able to solve my problem. Even

  • Another New Quantum Bug.

    Lately I sometimes have trouble turning off the VMS and Media Client boxes using the remotes. The light will go off, and then pop back on. Depending on when I get tired of pressing the STB button on the remote ( 5 times, 10 times), I'll go and use th

  • Unnamed/named faces unsticking in few select photos

    Please let me know if anyone has experienced this or know why this may be happening. Out of about 4000 photos, 3 photos if I name the face, click done, and then go back into it, the face is gone (the name of the face as well as the recognition that a