Poor Print Quality - Acrobat 7 Standard

Trying to print several PDF drawings to a Canon ir2880 network printer and the lines come out choppy and any text is unreadable. The printer has a post script driver, up to date. Has anyone else come across this problem? It only occurs with PDFs.

Thanks for the suggestion. Unfortunately that did not help. I think part of the issue is Acrobat is using up resources. I noticed that moving around the file or even when attempting to print the CPU maxes out. The PDF contains large drawings and that is probably the cause. Is there anything that can be done to optimize Acrobat for better performance?
Thanks

Similar Messages

Poor print quality through photoshop CS 6 using HP 7520

Hi Im having poor print quality (muddy) dense, I might not have the proper color management or printer profile loaded on the HP 7520. using Windows 7 (64) bit.
Thanks
Bill

Well, I guess it is all about the paper.
I started using Premium Ink Jet paper which cleaned up the printing a great deal. Standard quality settings now produce just faint imperfections but higher quality settings eliminate them entirely.
One of those "you get what you pay for" issues I guess.

HP LaserJet 2600n poor print quality/streaking

I am the original owner of an HP LJ 2600n with a poor print quality/streaking issue. The poor print quality occurs with any and all paper that I use (currently Hammerhill 20# stock) and occurred with Windows XP and Windows 7. The print cartidges are all genuine HP and changing them does not make any difference. I have cleaned the front door roller with no improvement. My firmware version is 20070716. The black cartridge is at 33%; yellow 75%; cyan 91% and magenta 91%...
Any advice would be appreciated. An example of the output is attached below:

Hi everyone,
I have resolved my problem. I took a leap and purchased a new toner cartridge, and the new catridge works great. Installed it yesterday and the test page comes out clean, clear and with no double image. I'm happy.
Apparently the printer had not had a print item sent to it in over a year. I think that was actually hard on the toner cartridge.
Tthanks to everyone for their help via private emails!
mark

L7780 poor print quality after not using for 6 months

Poor print quality after not using my printer for about 6 months. Ran thru the tools (clean printhead, aligh, etc . . .) didn't help. Replaced all chartridges, still no help.
I'm fairly tech savy, been in IT for 27 years starting with hardware support.
Question, can I manually clean the printheads or should I just replace. I would rather try to clean them manually after just shelling out > $ 170 on new chartridges.
thanks
Brent

Hi @Brentl
Yes, you can clean the printhead and the inside of the printer. The following document will help; 'The Following Printheads are Missing or Damaged, Replace the Printhead' Message Displays on the All....
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

How do I install the PDF printer in Acrobat Standard 10.1.12??

Updated to Acrobat Standard 10.1.12 a week ago and noticed that no PDF printer was installed. How do I install the PDF printer??

Sara,
Yes I’m running Windows 7 (64-bit). I went to the web site and followed the Add Printer instructions. I tried all of the Adobe PDF Converters and I got either one or the other of the two messages in the attached file. I appreciate your help and hope you’ve got other ideas. By the way, I’ve already completely un-installed Acrobat Standard X and reinstalled. No joy. When I got this PC I had to install this version of Acrobat on the machine and I had no problems like this. I have also applied several updates to my original version of Acrobat Standard X and I never had this issue. This issue just came about when I applied the 10.1.12 update. But the un-install and re-install has not fixed the PDF printer issue.
So, hope you’ve got some other magic. It does seem like some needed Adobe software is missing or there is something else on my machine that is impacting the proper installation of the Adobe software pieces (or not allowing some pieces to install).
Thanks for your help,
Nick

C4180 poor print quality

I've had my c4180 for a couple of years without any problems but the image print quality is now starting to deteriorate. When printing images on normal paper I usually print at maximum dpi but the quality is quite poor with white lines across the images. I've tried cleaning the print cartridges many times but it makes no difference. I've taken out the colour cartridge and given it a clean as recommended but still no improvement. There is just under half of the colour ink left so it's not because I'm running low either.
It's looking like I will need to buy a new printer which I really didn't want to have to do as it works perfectly apart from this.
Can anyone suggest anything?
Thanks in advance.

43,
Ink has a limited life span. It is sad, I know. The ink in the printer may just be "old" beyond it's actual age.
I have an old J6480 that I use only occasionally -- it is such a good printer that I keep it in spite of the fact that I might have to change out the cartridges more frequently than when the unit actually runs out of ink.
You might change out the cartridges so you are not coating the insides of the printer with the old ink.
If you are not going to use the printer very often, it does seem to help to keep it stored in a cabinet: dark and enclosed where there is not an abundance of light, dust, dampness, or temperature differences. I keep the J6480 in a cabinet on the other side of the house and use it wirelessly about every six months.
You may have to re-run the cleaning operation a couple of times after you do change the ink; change out the cartridges, test, and then decide.
Click the Kudos Star!
It is a nice way to say “Thank You” for the help.
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur

CP1025nw, repeptetive smudges, poor print quality, pushing toner button does nothing.

I haven't used this printer in a couple of years, so I sense some of my issues might be related to that. First up, the print quality is quite poor. Despite having a new black toner cartridge, the B&W printing isn't very strong; it's blotchy in some areas with random spots in others. Second, there are repeating color splotches all over the place. I've attached a photo. Third, pressing any of the toner buttons does nothing, no beeps, blinks, or movement. So far, the only things I've tried was toreplace the black toner cartridge and blow out the interior of the machine with compress air. I also removed the drum and gave that a quick and careful cleaning.. Any thoughts?

Hi , Welcome back to the HP Support Forums! I understand that you're experiencing print quality issues on your HP LaserJet Pro CP1025nw. I would be happy to assist you with this. Please try the steps in this document to see if it will help resolve this issue. Resolving Print Quality Issues. If you get to Solution eleven: Replace the problem print cartridge. I recommend you call technical support before you consider replacing the cartridge. Contact HP Technical Support: What you can do, is use the following link to create yourself a case number, then call and it may help speed up the call process:
Step 1. Open link: www.hp.com/contacthp/
Step 2. Enter Product number or select to auto detect
Step 3. Scroll down to "Still need help? Complete the form to select your contact options"
Step 4. Scroll down and click on: HP contact options - click on Get phone number
Case number and phone number appear.
I hope this helps.

Cannot Print with Acrobat Standard X

One of my clients is running ACROBAT X Standard on Windowes 7 64-bit.. She cannot print any PDF using Acrobat to any printer. Print jobs never reach the queue. As a work around she muct convert to Word.
Printing as image does not help.
Saving a copy does not help.
I have applied al updates, repaired and completely removed and re-installed the product but nothing helps.
Also, the Printer Properties button and Page Setup buttons do not work. They are not disabled (greyed out), they just don't launch these functions.
I appreciate any help!
Charlie O
Plexus IT

Hi I use windows and the Reader version I have is Adobe X1. And yes - I cannot even open Adobe Reader and yes I reinstalled it.
From: Sara.Forsberg <[email protected]>
To: Verla Adams <[email protected]>
Sent: Thursday, April 16, 2015 7:28 PM
Subject: all of the sudden I cannot print with Acrobat reader and when I tried help it suggested opening Adobe Reader but when I try to open it nothing happens. What can I do to fix this?
all of the sudden I cannot print with Acrobat reader and when I tried help it suggested opening Adobe Reader but when I try to open it nothing happens. What can I do to fix this?
created by Sara.Forsberg in Acrobat Reader - View the full discussionHi verlaa73828618, It sounds, then, that you can't even open Adobe Reader. Is that correct? What version of Reader are you currently using (and are you on Mac OS or Windows)? Have you tried reinstalling Reader? Best,Sara If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7446005#7446005 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7446005#7446005 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Acrobat Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Illustrator - poor print quality - jagged lines

Ok, I read here about color problems with Illustrator and InDesign when printing with devices considered "RGB" (like any non postscript inkjet). Well, my problem is different. Lines are jagged when printed with Illustrator, if I want good print quality I must use the system preview software (Mac OS X 10.5.6). This is not good, why open another soft if Illustrator MUST print the file for me. At Illustrator print dialog "print as bitmap" is market and can't be deselected (is gray).
I'm using
Mac OS 10.5.6
Illustrator CS 3 13.0.2
HP Photosmart C4280 All-In-One (DriverHP_Photosmart_C4200_series V. 2.3.2)
Thank you!

Illustrator is a postscript application. It sends Postscript data.
An inkjet printer without a Postscript RIP (Raster Image Processor) does not understand the postscript data, therefore it prints what it does understand - the low resolution raster preview image.
You can avoid all this by simply saving the Illustrator files (or Indesign files) as PDFs. Then print the PDF. Adobe Acrobat is a software RIP which converts the postscript data for you.
This is also why Preview will print correctly. Preview uses the embedded PDF data, not the postscript data.
Other than that, you need to get a printer that understands Postscript, preferable level 3 postscript.

Brother HL-3170CDW won't print in color, has poor print quality. I have downloaded drivers, and firmware from Brother with no success.

Just received this printer, and am unable to have any success with it printing in color. I have downloaded drivers, and firmware from Brother that are for OSX 10.9. Also, the print quality is quite poor. Any suggestions what I should be looking for to resolve this? I feel like I am back in the 90's with Windows 3.1!

You need to go to the brother website and download the driver for your printer. I had the same problem, and resolved it just now. The driver for this particular printer is not a good match for any of the preinstalled printer drivers on os x.

Poor print quality for black ink for Photosmart 6520e

Having a problem with black printing. Using all HP cartridges, but when I run a test page, I get white, horizontal bars across the black test bars. Some of them are 1/4 inch wide. Replaced the cartridge and did the automatic printhead cleaning, but no improvement. I know the printhead is not removeable, what is the next step?

Hi @Mikenstlouis,
Welcome to the HP Support Forums! I see you are running into some print quality issues with the black ink on your HP Photosmart 6520.
I would like you to continue here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, I understand you may have done some of these steps already but I need you to complete all steps in order to resolve the missing black issue you are experiencing.
Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
If you are still unable to print in black ink, I suspect the issue may be the printer and not the cartridge. I highly recommend you call our technical support at 800-474-6836, I trust they will be able to assist you regardless of the warranty status. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www.hp.com/cgi-bin/hpsupport/index.pl
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Dell 3130cn Poor Printing Quality

The print quality on my Dell 3130cn has recently gone downhill. It's missing print and the print that does make it to the paper is very light. I've changed out the toner cartridges but that didn't and honestly, I didn't expect it to help. Does this mean it's time for a new fuser?

Horizontal lines? Make sure you have the right print settings and paper settings on your printer.
That sounds a LOT like you have the paper type set to plain paper, or have it set to draft mode, or something.

Poor Printing quality after changing the catridges

After changing the complete set of catridge print quality is very bad and only prining in Magenta & Grey color.
regards,

Please read this post then provide some details. What printer model? What operating system? Are there any error messages on the printer or computer screen?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP6600 Poor Print Quality

Hi,
I am contiinually having to run the Printhead Clean feature before I can print with my Officejet 6600. Once the cleaning is completed, the print quality is fine. Prior to running the cleaner the printing is smudged, blurred or missing, and is often only black (i.e. no colours).
The printer is about 6 months old and has had this problem from day 1 ( I know, i'm lazy). I seem to be consuming almost all of my ink just getting the printheads clean.
According to the HP tool, the printheads are ok. The cartridges don't seem to have a vent in them, is this correct?
I'd appreciate any suggestions, please?
Rob.
This question was solved.
View Solution.

Hello @Crossy,
Generally you want to update the Firmware via a USB Cable connection as it is a direct connection. You don't want any interference when you run a Firmware Update as it reprograms the printer. If the programming update is interfered with in any way than you're pretty much left with an expensive paper weight.
In your specific case, because your printer is currently running version MIM2CN1435AR than that is the latest version. The Firmware Update tool will not allow you to resend the firmware.
The last step now would be to contact our Australian support team at: 1300 721 147
HP Australia Support Center
I wish you luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Recent poor print quality on C5580

I have had my C5580 for a year or so with no problems. Three days ago the print quality decreased dramatically with all the photos looking very grainy and pixely. I have replaced the ink cartridged, check the print quality which defaults to "best", and even check the camera to find out if I accidentally altered the photo quality. I am at a loss as to what happened. Any help?

Steps in this link should help you:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00219778&cc=us&lc=en&dlc=en&product=3575276&tmp...
Have you checked if standalone copy works fine?
I work for HP but my posts and replies are my own.
-Michael

Poor Print Quality - Acrobat 7 Standard

Similar Messages

Maybe you are looking for