Poor quality audio

P205 S6237 Satellite with very poor quality sound. The volume is okay, but the sound is warped like a bad audio cassett. No difference between the onboard speekers, head phones, or external speekers. I updated the audio drivers (Realtek), but made no difference.

Satellite P205-S6237
Probably the sound chip, but maybe interference from something in memory.
Two experiments to make.
1. Boot into Safe Mode.
Start your computer in safe mode
2. Boot normally into another user account. If necessary, create one.
Create a user account
-Jerry

Similar Messages

Disney Channel (250): Are you getting poor quality audio?

There are a number of people, myself included, who are getting AM quality audio on WGN, Comedy Central, FX, Discovery and The Disney Channel on 250. I spoke with a CSR and she said if enough people called in with their observations they would take action as apparently Disney is an important channel.
Even if you're not a fan if you're getting AM quality sound on 250 please call 888-553-1555 as the problems are identical and it would get Verizon a bone to work on so they can get to the rest later.
{please keep it relevant} she tried to blame my stereo for being faulty on the select channels while acting fine on the other channels and on Comedy Central when Verizon played local insert ads. If she believed me she wouldn't have said such things in such tones.
Thank you. Hopefully this can close the several threads open on these AM sound stations.
Message Edited by ElizabethS on 08-03-2009 04:04 PM
Drewdove
Solved!
Go to Solution.

Drew_from_Dover wrote:
The sound is AM quality again. I seriously hope they can find a permanent fix and not a temporary patch.
If any of you are experiencing this and call in thank you in advance for your efforts. They will be well worth it.
Tell them exactly what you're hearing (on 250) and compare it to what you're hearing on other SD channels. Thank you.
I guess the squeaky wheels got the fix! WGN, Comedy Central, FX and Discovery have had fixed audio for a week. It started with the fix to C-Span 2 and the fixes went on from there. Yet to be fixed is QVC, HSN, C-Span and Disney on 250.
Hey, you like Radio Disney on AM radio? You'll love Disney Channel with AM stereo sound.
I wouldn't count of Disney (250) getting picked next, not with the lack of interest as demonstrated in this thread. You're on your own, good luck!
Drewdove

IMac 27 - very poor quality audio when using analogue headphone output

Hi,
I've had my iMac 27 (i7 quad core, early 2010, OS X 10.6.4), hooked up to my hi-fi via the headphone output jack (analogue) since i bought the machine a few months ago, and its worked fine. However, the audio quality has suddenly deteriorated. The volume is very low, meaning that I can only hear anything if I turn up my hi-fi volume all the way, and then the sound is distorted (as you'd probably expect). Turning up the volume on say, iTunes, whist playing a track, combined with turning up the iMac's output volume does cause an increase in overall volume, but it only makes the difference between totally inaudible and very quiet! Its as if there is some internal output- level setting within the iMac that has 'stuck' at a very low setting!
Troubleshooting actions carried out so far:
Removing the audio cable from the iMac's headphone socket allows the Imac to play via its own internal speakers, and this works fine! (The sound is good, volume is decent, no distortion). So, its just the headphone audio that is affected!
I've verified the sound settings in system preferences. They look fine.
I've performed several soft and hard reboots (with up to 24-hours separating power-off/power-on cycles), but to no avail.
I've booted into Windows XP (bootcamp) and the same audio problem persists (so its not the O/S that's causing the issue).
I've checked the cable and my hi-fi by removing the 3.5mm terminating plug from the imac and sticking into my mp3 player's headphone jack. All works fine. I then inserted the 3.5mm plug plug into my laptop's headphone jack. Again, perfect sound reproduction through my hi-fi. I then returned the plug to the imac's headphone socket and the audio problem re-surfaced, so its definitely the imac that is at fault.
I've ran the extended hardware tests too - no faults found.
I reckon its a hardware fault, but just wondered if anyone else had experienced the same problems?
Incidentally, my Imac is well within its 12-month warranty, but the complimentary 90-day Applecare cover has expired. Looks as if I'm going to have to make an appointment with a 'Genius', but I didn't want to go through the hassle of transporting the system unless necessary. Thankfully, I've had none of the other widely reported quality issues, and apart from this audio problem the machine has performed flawlessly.
Kind regards.

I have 30 new imacs running Snow Leopard. They replace 30 emacs that were running panther. I have 30 headsets (labtech) that worked beautifully with my emacs. Used them so my kids could create imovie projects using imovie 6. Well all that has changed with my new imacs. I went to use imovie 9 today and what a disaster. NONE of the headsets would work as they had on the emacs. The kids had to wiggle the plugs and that would sometimes create sound out of one channel, no channels, or would create a crackling sound. Worse than that is that it would give the kids the spinning beach ball. They would unplug the headsets and after about 1 minute imovie would return to normal. I took some of the headsets and tried them out on an emac I have in the room and they all work. I tried them on my macbook pro and they all work. So, it is not wiring or a plug. The sound prefs are setup correctly. Any suggestions? Has anyone else experienced this problem? Here I have new imacs which will allow more sophisticated projects with the iLife apps, but can't use them due to inoperable headsets. I have tried three different brands of headsets and 2 of them will not work at all. These were brand new imacs - right out of the box, and brand new headsets. This is very frustrating to me and the students.
Any help would be appreciated. How can apple not design a fully functioning headphone jack as they have in the past?

ITunes only mono / very poor quality audio via Airport Express

I have a relatively old (3-4 years?) Airport Express, which had been working perfectly to play iTunes over my hifi system wirelessly. However after a year or two of not using it (and upgrading my OS X Tiger regularly in the mean time) I am having problems. Initially iTunes would not connect at all (unknown error -3256) so after reading various discussion posts I (a) downloaded AirPort Utility 5.3.2 for Tiger and (b) used it to upgrade the operating software on the AX unit (now 6.3 I think?), successfully I think.
Following this iTunes finds the external hifi/speakers and music plays wirelessly through them BUT the audio quality is terrible, varying from treble only with no base to playing only out of one speaker.
The audio quality is perfect if I plug my Mac / iTunes directly into the hifi using the same cable as that connecting to the AX unit, so I figure this must be a problem with the bandwidth/connection from the Mac to AX.
Can someone please help me? Much appreciated.

If it's bandwidth probelm I would expect to hear the music cutting in and out (as the AX trying to fill its buffer up and then the buffer becomes empty as not enough data coming in to fill it). Rather than becoming mono only or treble only.
I think you should check your analog connections.

IPhone 5 Poor Headphone Audio Quality

I got my iPhone 5 a few days ago and I must say the sound I'm getting from my iPhone 5 to my headphones is pure garbage.
I use Beats By Dre heaphones and when I listen to music on my Mac and other devices the audio quality is great, but when I listen to music from my iPhone 5 to my headphones, I hear excessive rattling over the vocals of the music I listen to. I'm assuming it might be the Music app's fault, since I listen to songs from the YouTube App as crystal clear as I do from my Mac from iTunes. I have the same problem with my EarPods: They sound great on anything but my iPhone 5 Music app. Is there any fix possible? Is there any Music app alternative I can try? I'm tired of searching for the songs I want to hear on YouTube everytime to get good sound quality...In short:
Sound quality from the Music app: Really poor quality, I can't stand it.
Sound quality from anywhere else on my iPhone: Crystal Clear
Does anyone get the same problem/complaint from their iPhone 5's?
Side Note: I do purchase my music from iTunes, so I should get good sound quality.

Hey, I recently discovered that when I purchase music from iTunes directly to my iPhone, the sound I get is crystal clear. Do the test with any song: Listen to it before downloading the song from iTunes > Delete it > Download from iTunes from your iPhone > Listen again.
The problem is that not all my music is from iTunes, most of my music comes from CDs. Another thing I must point out is that I can't figure out whether to blame the new Lightning Connector or iTunes from my Mac, since I thought Wi-Fi Sync would solve the problem but I see no changes at all with the music I didn't purchase from my iPhone 5

Poor Quality HD Channels

I see alot of posts, regarding poor quality HD channels. AMC ,IFC ,FOOD NETWORK, USA in regards to macroblocking, tiling, and audio lag, which I am experiencing in RI. Have called many times regarding this issue. Is Verizon working on this? Is it a problem that can be fixed? From what i understand it is a provider issue.
This problem goes back to 2009. Verizon's big selling point is "crystal clear" channels. They dropped the ball on this one!

forya1 wrote:
Sometimes it is an issue with HDMI especially if you are running through a Home Theater system. Try going direct HDMI, or even Composite (5 RCA Cables) If hooking up composite fixes the problem, then it could be your TV and box aren't getting along well.
Composite cables will NOT transmit an HD signal. I presume you meant Component.
Justin
FiOS TV, 25/25 Internet, and Digital Voice user
QIP7232, QIP7100-P2, IMG 1.9.1
Keller, TX 76248

Export via Quick Time ends up being pixelated and poor quality

I shoot my student film on an Arri S camera with 16mm color stock. I got my film back to me from the school on a DV tape and imported it into FCP HD on my camcorder. When I went to export it onto a DVD for my actors, the film looks horrible! The blacks are really pixelated and the colors aren't as crisp as they were on film. I was told that it should look the same because we made the movie on better equipment and FCP won't lessen that, but at the same time FCP can't make poor quality work any better. Can someone tell me how to export my film without losing the 16mm quality. I don't want it to look digital, I spent a lot to get the real film stock. Thanks!

1- The film is 6 minutes long
2- I don't know where to find out about the bit rates
3- The audio is simple, just 48 khz stereo.
When using DV format, what's the difference in DV, DVPRO, etc.?
The movie was filmed 24 fps, but then put onto a dv tape for me, so I assume they transferred it at 29.97 fps. Should I now use NTSC or stick to PAL? Basically, anymore compression makes the film look really bad and unusable for festivals, which ultimately was the whole purpose of my blood, sweat, and tears behind this film.
Thanks for all your help and any more questions you need answered to solve this problem I'd be more than happy to answer.

Why are burned DVD's poor quality from the IDVD?

I made a slideshow in iphoto and exported to IDVD so I could burn copies. The show lloked great on screen but the first copies on dvd's were terrible. The quality of images are very poor and seem to be depixilated? Why would the copies be so poor? Does the widescreen or standard have something to do with it??
Help

Hi
There are levels in h*e*l*l*
iDVD - is same as DVD Standard - Interlaced SD-Video
Feeding iDVD progressive or HD material will not improve result but degrade this as from
- iMovie'08 to 11 - as they can not deliver - but only every second line of the picture
- iDVD downscaling from HD - is doing a bad job
So by using a program that can deliver - best possibly DVD is the result
- iMovie HD6
- FinalCut any version
- FotoMagico™ - (for SlideShows)
If this is not enough - then DVD is no option as HD-DVD is rare and needs special HD-DVD-players - alt
• Blu-Ray e.g. from Roxio Toast™ but still needs BD-Player as PlayStation3 etc
• out in high quality to USB-memory to be played on device that can do this
• Play via MacBook and out to a HD-projector/TV
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
Try to break the process up into two stages
• Save as a DiskImage (calculating part)
• Burn from this .img file (burning stage)
To isolate where the problem starts.
Another thing is - Playing it onto a Blu-Ray Player. My PlayStation3 can play BD-disks but not all of my home made DVDs so to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
• No File Vault on - Important
• NO - TimeMachine - during iMovie/iDVD work either ! IMPORTANT
• Lot's of icons on DeskTop/Finder also slows down the Mac noticeably
• Start a new User-Account and log into this and iMovie get's faster too - if a project is in a hurry
• And let Mac run on Mains - not just on battery
Yours Bengt W

Poor Quality Export to AVI

Hi im a newcomer to Premier Pro and need some help in adjusting my settings for exporting my video.
The video in question is made up of 5 seperate videos (created from still jpegs with ImageVideoMachine at 1024x768 with 24fps and 1080HD Profile). When I view these videos seperately they are good quality and do not have any problems. However after i imported them to Premier Pro and added an audio track in the background and a small bit of text the quality after export is really bad in places.
I have tried lots of different settings in the export but just cant seem to get it right. The main problems that seem to occur is when the camera moves quickly from one scene to another and it seems to get very blurry and pixelated and sort of like half the scene is catching up (hope this makes sense!).
The entire video is only 4 and a half minutes long so I am not too worried about the size of the file. Any help would be greatly appreciated as im at a loss what to try next and the poor quality of the video takes away so much from my hard work in creating the presentation.
Hoping you can help
Alan

Just as further information for anyone who can help. These are the properties of one of the five .avi files I created using ImageVideoMachine. As I said these play at a good quality and without any pixelation of blurriness.
1.avi
Type: AVI Movie
File Size: 32.6 MB
Image Size: 1024 x 768
Pixel Depth: 1024
Frame Rate: 24.00
Total Duration: 00:00:41:21
Average Data Rate: 797 KB / second
Pixel Aspect Ratio: 1.0
AVI File details:
Contains 1 video track(s) and 0 audio track(s).
Video track 1:
Size is 32.58M bytes (average frame = 33.20K bytes)
There are 76 keyframes, 929 delta frames.
Frame rate is 24.00 fps
Frame size is 1024 x 768
Depth is 24 bits.
Compressor: 'DX50', ffdshow Video Codec
Now these are the properties of the best quality export from Premier Pro after I edited my video. Although this is my best quality export it is still very poor quality compared to the original videos I am using to create it.
Type: AVI Movie
File Size: 212.6 MB
Image Size: 1024 x 756
Pixel Depth: 1024
Frame Rate: 24.00
Source Audio Format: 48000 Hz - 16 bit - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:04:11:00
Average Data Rate: 867 KB / second
Pixel Aspect Ratio: 1.333
AVI File details:
Contains 1 video track(s) and 1 audio track(s).
Interleave: 1 : 24.00
Video track 1:
Size is 166.44M bytes (average frame = 36.10K bytes)
This movie appears to have DROPPED FRAMES
There are 28 keyframes, 5905 delta frames.
There are 91 empty frames.
Frame rate is 24.00 fps
Frame size is 1024 x 756
Depth is 24 bits.
Compressor: 'DX50', ffdshow Video Codec
Audio track 1:
Size is 45.95M bytes
Rate is 48000 samples/sec
Sample size is 16 bits
Hope this helps you to understand what im trying to do here.
Thanks again
Alan

SWF poor quality and poor lip sync?

I normally use After Effects and today is my first time experimenting with Flash.
I create virtual presenters that are filmed against a green chromakey screen. I use Keylight in AE to key the green and replace it with different backgrounds. These are then saves as .FLV files.
In my current project the client really wants SWF files. I have tried to convince them to accept FLV's but they won't take them. So, my task is to basically convert my high quality FLV files created in After Effects to SWF's.
I've imported the FLV into Flash and exported it again as an SWF. However, the quality is very very poor and the video is playing at half the speed of the audio, which throws the lip sync off.
Can some please walk me through the correct process of importing the FLV and converting it to a high quality SWF file? As this is my first time with Flash it will need to be a 'take my hand' walkthrough as Flash is very new to me and I am not at all familiar with the softwae interface etc.
The poor quality SWF I created is attached, as well as the high quality FLV I am working from. My task is to create an SWF that replicates the quality of the FLV.
Many thanks.

I would take what Kglad has said a little further. Lyp syncing a live action video of a person with flash is impossible. You could probably do it with some kind of animated figure.
The client is not always right. Unless they have a limitless budget and are willing to fund you and a team for a year or so, I would suggest that you all take a look at why they want a swf.
If they think it is because swfs offer good quality, scalable raster graphics, in a small file size...well they are wrong. For this kind of video the file size will be just as large or larger than an FLV and it won't scale up without getting pixelated.
If they think it is because the swf is easy to play back and an FLV isn't...well they are kind of correct. But in that case the answer is to create some kind of player that plays back the FLV.
Those are the only two reasons that I can think of why someone would say, "Oh we have to have a swf."
Maybe there are others?

Master file is poor quality when played in QT

I have a 45 minute documentary that was ingested as native into FCPX from a Sony XDCAM, compressed in compressor using mpeg-2 for DVDSP.
All this worked fine.
My question is about the master file. It is 422 (same as source)and Linear PCM. Playback in QT is pretty poor quality.
I optimized (as I was working in proxy) before creating the master file.
My question is, is this normal or did I choose the wrong settings?
Thanks
Sandy

What are the complete specs of the original media besides XDCAM?
compressed in compressor using mpeg-2 for DVDSP.
It is 422 (same as source)and Linear PCM.
I don't believe this is correct. If it's compressed for DVDSP it's going to the DVD standard and is no longer 422. The audio is separate and is normally compressed to an AC3 Dolby Digital file.
I optimized (as I was working in proxy)
Did you switch back to original/optimized before you exported, or did you export the proxy version?

Internal mic poor quality when recording in iMovie

I noticed exceptionally poor quality of internal mic when recording acoustic guitar piece on iMovie, with the built in iSight camera. Technically, the sound is called "Phasing" - it sounds like a slow 'whoosh' over all of the audio.
After investigation, I have found the cause to be the Ambient Noise Reduction algorithm added by Apple.
To remove this - go to:
System Preferences
Sound
Input
*uncheck* 'use ambient noise reduction'
Problem solved....
Now my question - does anyone know how to use the iSight (built in) and simultaneously and synchronously record audio using an External Mic - eg the Blue "Snowball" - which is a USB mic.
In theory, the mic should plug in and then show up as an external device, but when I select iSight camera as my video source - the Powerbook automatically assumes that I want to use the internal mic as my audio source.
Have tried to go to Sys Prefs and change 'Input' to USB - but no option to do so
All help appreciated
SK

Hi thanks for the response
unfortunately, it's got nothing to do with MIDI (which is just a series of controller information)
The Blue 'Snowball' External mic is essentially a 'USB Device' and should be recognised as such by the Mac. The data will come in as 16bit, 44.1khz AES bit stream and then be assigned a destination.
The problem is that iMovie does NOT allow me to separate the iSight camera from recording with 'internal mic'
I want a way of finding how to seperate them - and then assign the USB mic to be associated with the iSight camera - giving me iMovie/iSight videos - with PROFESSIONAL sound
sorry if i didn't make this clear
thanks again
sk

Poor quality F4V compared to FLV

Converting MP4 H.264 file to F4V using CS4 Media Encoder -
results in poor quality playback of F4V (jumpy video and audio out
of synch). Same file converted to FLV using CS3 Flash Video Encoder
has no such problems and is only marginally larger in size.
Examples and source MP4 here:
http://www.2epr.co.uk/test/theoffice.php

This is in wrong forum. Will repost in General.

Very poor quality ichat video

I am new to ichat and I have very poor quality video links with my family. One in CA and the other in TN both are on macs. They are both very fragmented and broken up. Also there is a huge delay in the audio. Please help....I can't see my new nephew. Thanks

i am also having issues with my ichat video quality, and there is a delay on audio sometimes. i chat with my friend in philly; i am in brookyn, ny. sometimes the audio is in sync, and then sometimes we have a delay. but the video quality is so blurry on my end...i can barely see her. but her video of me is fine. my preview screen looks great, the connection doctor says everything is good.
i'm not very good with macs tho and computer jargon. i need someone to help me, but who can walk me thru this stuff like im in first grade.

Poor quality of motion background menu

Hello to all.
For the first time I have made a motion menu with Encore CS5.1
The video background of the menu is of poor quality. It seems that the frame rate is lower than normal.
I have made an experiment:
the menu shows a button which gives access to a video sequence which is the same as the background of the menu. The sources are strictly the same.
The result is that the backgroud menu is of poor quality compared to the content linked by the menu although the assets are the same.
The settings I have used are in the images below.
You will see the video at : http://jp-tech.pagesperso-orange.fr/download/DVD.zip
I have carried out different settings. The results are the same.
Any help appreciated, thank you.

Hi Stan Jones,
Thank you so much for the reply.
I am not sure I have well understood your advice. I think you told me that there is not enough bitrate for the audio.
Anyway I have changed the settings as the following and the issue is the same. Best regards. Jean-Paul
Message was edited by: JP-49

Poor quality audio

Similar Messages

Maybe you are looking for