Poor Quality Export to AVI

Hi im a newcomer to Premier Pro and need some help in adjusting my settings for exporting my video.
The video in question is made up of 5 seperate videos (created from still jpegs with ImageVideoMachine at 1024x768 with 24fps and 1080HD Profile). When I view these videos seperately they are good quality and do not have any problems. However after i imported them to Premier Pro and added an audio track in the background and a small bit of text the quality after export is really bad in places.
I have tried lots of different settings in the export but just cant seem to get it right. The main problems that seem to occur is when the camera moves quickly from one scene to another and it seems to get very blurry and pixelated and sort of like half the scene is catching up (hope this makes sense!).
The entire video is only 4 and a half minutes long so I am not too worried about the size of the file. Any help would be greatly appreciated as im at a loss what to try next and the poor quality of the video takes away so much from my hard work in creating the presentation.
Hoping you can help
Alan

Just as further information for anyone who can help. These are the properties of one of the five .avi files I created using ImageVideoMachine. As I said these play at a good quality and without any pixelation of blurriness.
1.avi
Type: AVI Movie
File Size: 32.6 MB
Image Size: 1024 x 768
Pixel Depth: 1024
Frame Rate: 24.00
Total Duration: 00:00:41:21
Average Data Rate: 797 KB / second
Pixel Aspect Ratio: 1.0
AVI File details:
Contains 1 video track(s) and 0 audio track(s).
Video track 1:
Size is 32.58M bytes (average frame = 33.20K bytes)
There are 76 keyframes, 929 delta frames.
Frame rate is 24.00 fps
Frame size is 1024 x 768
Depth is 24 bits.
Compressor: 'DX50', ffdshow Video Codec
Now these are the properties of the best quality export from Premier Pro after I edited my video. Although this is my best quality export it is still very poor quality compared to the original videos I am using to create it.
Type: AVI Movie
File Size: 212.6 MB
Image Size: 1024 x 756
Pixel Depth: 1024
Frame Rate: 24.00
Source Audio Format: 48000 Hz - 16 bit - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:04:11:00
Average Data Rate: 867 KB / second
Pixel Aspect Ratio: 1.333
AVI File details:
Contains 1 video track(s) and 1 audio track(s).
Interleave: 1 : 24.00
Video track 1:
Size is 166.44M bytes (average frame = 36.10K bytes)
This movie appears to have DROPPED FRAMES
There are 28 keyframes, 5905 delta frames.
There are 91 empty frames.
Frame rate is 24.00 fps
Frame size is 1024 x 756
Depth is 24 bits.
Compressor: 'DX50', ffdshow Video Codec
Audio track 1:
Size is 45.95M bytes
Rate is 48000 samples/sec
Sample size is 16 bits
Hope this helps you to understand what im trying to do here.
Thanks again
Alan

Similar Messages

  • Poor quality Export for HD with moving objects

    When I export from iMovie6 any moving image is very poor quality. I am using a Sony HDR-HC1 and trying to export at the highest possible settings.
    When the image is still the quality is very good, but if anything moves the image goes "wobbly" and "jigsaw" like. Panning shots are hopeless and anyone walking in the shot goes wobbly.
    The original capture image seems fine, so I assume it is an exporting problem. Exporting at lower setting, ie for an iPod, the image is great.
    I have tried all different setting, some are better than others.
    Can anyone help?

    Your description of the problem - a 'comb' effect - sounds as if the "fields" which make up the resultant picture have been put together in reverse.
    (..You don't normally see 'interlaced' video in iMovie's playback window - you normally see just a single field of the two, to make the picture clearer and simpler to display..)
    [..A video picture's generally made up of two "fields" which each comprise half the number of lines down the screen: one field comprises the odd-numbered lines, and the other the even-numbered ones. Your exported video should be encoded with the lower (2nd) field first ..as described in this Apple document ..and the problem's mentioned here as well..]
    However ..you said in your first post that "..I am using a Sony HDR-HC1 and trying to export at the highest possible settings.."
    This is an HDV camcorder, and you didn't say if the original footage which you shot was HDV or normal DV. (HDV is recorded differently from normal DV, as it's recorded in a more compressed format, and it has to be automatically 'unscrambled' by Apple's Intermediate Codec while you're importing it into iMovie HD.)
    It seems as if somewhere along the chain of importing>editing>exporting, the fields are being reversed, so that you get this jumpiness on replay when QuickTime tries to deliver a "highest quality" interleaved replay of both fields:
    Ah ..sudden thought: you mentioned that you exported thro' iDVD: "..I have used iDVD by dropping it into a DVD theme and it seems to work ok, although the playback is a little jumpy, not quite as good I would have expected.."
    You may have left the iDVD settings at their default 'NTSC' instead of switching them to PAL.
    Check your iDVD Preferences ..that may be the problem.

  • Poor Quality Export. PLEASE HELP!

    In FCP X, I am trying to export my project in full quality. I went to quicktime export like I did in FCP7 to create a reference file for burning to DVD but the file was very pixilated and poor quality. what should I do to create a full quality export in FCP X?

    So you captured via Firewire ... then it seems likely the footage is DV.
    You imported the footage into FCP X, edited with it, and then exported using Share > Export Movie w/ Current Settings, yes? If not, how? What specific steps and settings did you use?
    And then you burnt a DVD with the exported movie file and it looks pixelated on your TV? Did you do a direct DVD burn test using the original capture files, just to test that they are not teh problem?
    Cheers
    Andy

  • Poor quality exporting from iMovie to iDVD

    When I export a dv movie from iMovie to iDVD, the quality drops significantly. A nice clean movie imported from a dv camcorder to iMovie becomes horrible pixelated mess once exported into iDVD and actually burned into a DVD. No matter what quality settings one uses.
    It seems like many people experience similar problems, judging by postings (unanswered, as far as I can tell). It also appears that basically everyone using iMovie has this problem, but most people are content with poor quality DVDs, or are they?
    Does anyone know why this is so, and if there is any workaround? You know, the simplest way out is to switch to a PC and use one of their standard movie editing software, but isn't Mac supposed to be better for this purpose?

    Hi
    A.
    If You included photos into Your movie and used Share/Export to iDVD. iMovie
    asks to render the material = Destructive in two ways:
    • Losy iDVD project
    • Original iMovie IS HARMED: Photos needs to be re-imported and re-edited.
    • Re do the import and editing.
    • Close iMovier
    • Open iDVD
    • Drop iMovie project icon (with a Star on it) into iDVD
    Done.
    B.
    There are a major difference between a Mac Monitor and a Standard TV (much less
    sharpness due to 525 - 625 lines (NTSC or PAL))
    I connect my Camera to my Mac (via FW) and analog out to a TV so that I can monitor
    the process during iMovie editings. (iMovie preferences set Playback via Camera)
    Yours Bengt W
    Yours

  • Image Quality Exporting to AVI

    I have tried several ways to export to an avi file and the quality is horrible. Any suggestions - I have imported HD footage that looks fine in I Movie but not when it is a finished avi movie.

    Why do you need the AVI container?
    The AVI codec used by iMovie is the ancient Cinepak and it was designed for 320X240 dimensions.

  • Poor Quality Exports of 2D Images

    I have been asked by one of my users about an issue he is having trying to export 2D images of an 3D model in Acrobat 8 Pro on a PC running Windows XP Pro.
    I've looked at the preferences, tried various permutations of the preferred render and legacy hardware setting, and tried increasing the quality of the JPEG and PNG settings in the Output options: none of these produce satisfactory results - it gives muddy lines, poor anti-aliasing and a generally worse appearance than I can get by doing a print screen.
    Is this just a limitation of the version of Acrobat being used, which might improve with version 9, or does anyone have any tips on what to look at to rectify the situation?
    If it is any help, someone else who took a look at it thought that the output seemed to be not using the DirectX9 even when it was set - could it just be that the hardware/ video card isn't up to it?
    Please excuse the possible use of confusing or incorrect terms - I'm a 2D not a 3D person by experience, so I've not got a lot to go on: any help gratefully received!

    The maker of the programme you choose to use is quite moot as they will all use Quicktime to do the actual conversion, and Apple make that.
    What export settings are you using? And what are you viewing the output on?
    What dimensions and colour profile are the original files?
    DVD's are very heavily compressed as is mp4, and slideshows sent to iDVD are doubly compressed - first in iPhoto and afterwards by iDVD.
    The best programme is made by Apple. It's called Final Cut. The Express version is excellent and well worth the price, assuming you don't want to pop the $1k for the full Studio version. However, if you've never used an NLE be prepared for a learning curve.
    Like any slideshow app you will get best results with non compressed images - i.e. don't use Jpegs or png as these are compressed. Making the slideshow in any app involves further compression so working in a lossless format like tiff is best.
    The best output setting will depend on where you intend showing the slideshow.
    Alternatives include PhotoToMovie and Photomagico. There are others, search on MacUpdate.
    Regards
    TD

  • Poor quality export to Quicktime

    I'm using Keynote '08 and getting varying results when exportng to QuickTime
    Both using these settings:
    Export
    Quicktime
    Include audio sound files / movie audio
    Full-quality large
    The only differences were:
    6 months ago
    Manual advance
    The Keynote had 2 quicktime movies incorporated
    Result - excellent quality
    Yesterday
    Recorded timing
    Include the slide show recording
    The keynote had NO quicktime movie BUT a voice over narration
    Result - poor and photos were very degraded
    Can anybody shine light on what could have happened please?

    Where have all the experts gone? I thought this would have an easy solution.

  • Poor quality export from imported mp4 screen capture

    My video source is an mp4 file created from a screen capture of a unix app running on a PC. Quicktime plays the mp4 file fine (lots of detail, dark blacks, ...), but the resulting movie (Share > Export Movie > HD 720p) is faded. When shown on a large screen, the movie is pixelated and faded (grey blacks, etc.).
    I imported the mp4 file into iMovie (File > Import > Movies) with Fit in Frame, Optimize video unchecked, Widescreen (16/9), and 30 fps NTSC.
    I have tried various combinations of import and export settings and the above is the best I get.
    I'm guessing the import is throwing half the information away (hence the faded appearance). Whatever the cause, is there a way to import mp4 files into iMovie and get the same quality on the export? I tried exporting the entire import and got a file about half the size.

    Your description of the problem - a 'comb' effect - sounds as if the "fields" which make up the resultant picture have been put together in reverse.
    (..You don't normally see 'interlaced' video in iMovie's playback window - you normally see just a single field of the two, to make the picture clearer and simpler to display..)
    [..A video picture's generally made up of two "fields" which each comprise half the number of lines down the screen: one field comprises the odd-numbered lines, and the other the even-numbered ones. Your exported video should be encoded with the lower (2nd) field first ..as described in this Apple document ..and the problem's mentioned here as well..]
    However ..you said in your first post that "..I am using a Sony HDR-HC1 and trying to export at the highest possible settings.."
    This is an HDV camcorder, and you didn't say if the original footage which you shot was HDV or normal DV. (HDV is recorded differently from normal DV, as it's recorded in a more compressed format, and it has to be automatically 'unscrambled' by Apple's Intermediate Codec while you're importing it into iMovie HD.)
    It seems as if somewhere along the chain of importing>editing>exporting, the fields are being reversed, so that you get this jumpiness on replay when QuickTime tries to deliver a "highest quality" interleaved replay of both fields:
    Ah ..sudden thought: you mentioned that you exported thro' iDVD: "..I have used iDVD by dropping it into a DVD theme and it seems to work ok, although the playback is a little jumpy, not quite as good I would have expected.."
    You may have left the iDVD settings at their default 'NTSC' instead of switching them to PAL.
    Check your iDVD Preferences ..that may be the problem.

  • Poor quality export and zoom

    Hi
    I downloaded trial of 4.1 and 4.2 of LR and wanted to make my photos is this software over DPP, but...
    I was working few days until did some compare of export files. It's terrible.
    I'm not speaking about wrong colors or so. I have all profiled and I'm useing icc also monitor icc capable viewers,
    but any way - loaded to LR look same.
    It's also no problem with jpg quality settings, I use 76, but there is no better with 100%.
    Exported with sRGB.
    Jpeg quality is bad if more dark colors in one. If I take exposure down, then it looks like jpg saved with 1 quality.
    This same quality I get when zoom 1:1, on normal screen is OK.
    Is this trial problem? If so, no problem, but if I buy and get this same, then I can be ungry.
    No such problem with DPP.
    Any ideas?
    thx
    EDIT - i send files to friend with full version, it's this same! More... It's this same even when exported to Tiff uncompressed.
    I followed more and found that problem is much less visible with Adobe Std profile instead of camera profiles (neutral, portrait etc..). Screenshots are saved via paint and here rescaled, but You exactly can see what I mean. In reality DPP You can't pixels as here, so also in LR little less, also on screenshots from export colors are a little bit off, but in real they are similar.
    I can't get it...
    Normal view:
    LR 1:1
    LR export q76:
    DPP view:
    DPP zoom 1:1
    DPP export q7:

    What camera is that?

  • Poor quality exports

    I've created flowcharts for a client in Lucid Chart, and saved them as PDF. The quality at that point is excellent. When I use PDF pack to export to either Word or Excel the quality is terrible. Can this be corrected?

    Hi Martin,
    Have you tried this option:
    OCR
    Please let me know if that helps.
    Looking forward to hearing back from you!
    Kind regards, Stacy

  • Poor quality Exporting HD to Standard def with iDVD

    I am new to this forum thing. Sorry if I get the etiquette wrong. I have filmed my sons 1hr soccer game in HD (1440 x 1080i). I have added titles, replays and music etc in final cut express. No problem here. I export to quick time movie. Then import into iDVD, create theme and burn DVD. Problem is when I try cut a DVD to SD the game is really jumpy. The play is not smooth at all. I am new to Macs and final cut express, which is adding to my frustration. Can anyone help me with best setting to get nice smooth result? I know some of you may think, why HD? I just love the quality on a full HD screen. Camera can shot in SD but would like to stay in HD. Any suggestions. We down here in NZ use Pal and I would like in 16x9. Thanks

    Bryan Rawiri wrote:
    .. I noticed the person today adjusted the bit rate and a few other settings. The result DVD was great. Its the quality I am after from FCE? Is this possible?
    I dare to say: quality in FCE and FCP with your material is same..
    the difference could come on DVD-authoring..
    as you noticed, the operator adjusted bitrates..
    => no chance to do so in iDVD in iDVD, you adjust bitrates by the length of the project! as long as content on DVD is <60min (that includes button animations, 'Theme' movies etc), iDVD uses the max of bitrate, standards allow.. so, iDVD or DVDSP - for shorter project, concerning pic quality, you shouldn't notice any differences.
    usually, bad pic quality on DVD results of 'bad' source:
    • source is not iApp compatible (not in your case, as YT-videos, DivX-downloads etc)
    • imported project has wrong settings.. (e.g. framerate)
    • transfer file uses wrong codecs (e.g. highly compressed h264)
    so,
    a) check your FCE project properties - do they 'fit' to your camera
    b) transfer by using Quicktime Movie, NOT Quicktime Conversion
    c) set iDVD to same standard as your FCE project (30frames=NTSC, 25=PAL)
    d) stay under 60min to get the max...
    . . Reading the manual it says 50 is fields per sec and 25p is 25frames per sec. Yes it is not progressive.
    yes, it IS progressive ..
    you have 50i, or 25p
    and 1080/25p is not supported by FCE4; 1080/50i IS supported..

  • Poor quality exported pictures on any format

    i've an issue when exporting my 10 mp jpg to any format (this is not a jpg export issue, exporting to dng and tiff is bad too...)
    when exporting any pics taken with my canon g7, the result is strange. There is an echo on each picture (this issue is present with or without tweaking the picture).i always export and reduce pictures to 800x600 max. I think it is a lightroom issue because exporting the same picture with psp 4.12(!) don't do this, but looks less sharpen. Is there an optimisation always "on" with lightroom exporting module?
    I'm very disapointed about this issue. I'm still using psp to export my pics...
    Here is two examples:
    Lightroom export 1:1:
    http://img259.imageshack.us/img259/6697/img1548lrhm5.jpg
    Lightroom export 1:1 then zoom x2:
    http://img259.imageshack.us/img259/6444/img1548lrzoomx2vp1.jpg
    Psp4 export 1:1
    http://img259.imageshack.us/img259/4209/img1548pspvq1.jpg
    Psp4 export 1:1 then zoom x2:
    http://img243.imageshack.us/img243/416/img1548pspzoomx2nt5.jpg
    what's wrong with LR?

    I also believe it's the firmware.
    I've had my N95 for little over a week, and I've taken about 100 pictures of my car with it (crazy paint so trying to capture the true effect is hard). It came with version 10.xx.xx of the firmware
    Of these 100 or so (108 to be precise) which seemed picture perfect (no pun intended) on the screen, approximately 80 of them were either overexposed or out of focus, despite predominantly having green brackets.
    I've just updated my firmware to version 12.xx.xx and initial results seem very positive, the camera seems much more effective and focussing seems much better after 5 quick snaps.
    Another thing to bear in mind, which I've read quite a lot of times (not only here I hasten to add), that updating the firmware doesn't work the first time, and people have had to reinstall it several times before getting the desired operation.
    I was reluctant to update mine as it was locked to orange, but the phone was becoming increasingly "crashy" with resets being needed 3 or 4 times a day, calls being dropped and the phone crashing mid-call, and various lock ups when navigating the menu systems. I decided that I'd rather risk a potential nulling of the warranty and have a phone that worked better and so unlocked the phone myself (brilliant, easy and takes no more than 5 minutes I might add!) and I'm now on the latest firmware. Seems great so far but I've got copies of previous versions should they be required.
    Anyway I digress, the firmware seems to have given a marked improvement in the cameras performance, but I'll continue my snapping through the day to confirm this and get back to you with my results.Message Edited by skyline_stu on 04-Aug-200705:20 AM
    Nokia N95 and a Nissan Skyline GTR, my two favourite gadgets

  • Is microsoft avi the highest quality format to export an avi file in premiere pro cs4?

    Hello,
    I exported an avi file in premiere pro cs4 in media encoder using Microsoft avi format but the quality turned out poor on dvd, what's the highest quality format I can use?
    Please help
    Thanks
    Elio

    Elio,
    As has been stated, DV-AVI is not the format FOR a DVD-Video. However, it can be used (and often is) as a transport medium into a DVD authoring program, like Encore.
    Can you please outline your workflow from PrPro to the final DVD, and is it a DVD-Video (will contain MPEG-2 material in VOB "containers"), or a DVD-Data, that is then played on a computer with something like Windows Media Player, VLC, MediaPlayer Classic HC, etc.?
    Good luck, and please let us know exactly what you are doing, and the programs used.
    Hunt

  • Poor quality of all exported media

    Just started using a brand new Edit PC with PP CS4 and Matrox RTX.2    Imported AVI is very good quality and sharp when viewed on the timeline and on the output monitor, however, when I export any clips, the quality of the video appears flat and lifeless, as if the contrast has been reduced and the brightness increased.  The exported files are played on Windows media player on both this machine and several others - the result is the same.
    I want to export to windows media and have used 'PAL widescreen source - high quality download' preset and windows media 9 (and several others) but the result is the same whatever I use and however I tweak the settings.  Also, if export using Microsoft AVI instead, or mpeg1 or mpeg 2, the result is always the same when I play the exported clip in windows media player.
    I could convert the avi file through an external encoder to wmv, but a) I want to export direct from the timeline and b) the exported avi file has the same poor quality and c) that would be defeating the object of having CS4.
    System is Vista, 4gb ram, 2 x quad core Xeon processors, ATI Radeon card, MAtrox RTX.2 v4.00x/  Prem pro CS4
    Any ideas?  would the update to Matrox 4.01 help? What am I missing?  My old prem pro 1.5 exported crisp quality video every time.
    Many thanks

    I've been having similar issues with mpeg2 encodes in CS4, working in ntsc standard definition -- also on a hot new machine with the RTX2, Vista 64, 12 gigs ram, etc. In my tests I can get a sharper encode either using PP 1.5 on an older machine, or using a freebie stand-alone encoding program called WinFF.
    In my case, I've actually been able to get sharp encodes in the matrox avi format --  those turn out fine for me. But once it goes to the AME for mpeg encoding, then it gets fuzzy. I've tried the 1 pixel offset, but that hasn't really made much of a difference.
    The thing I like about the matrox card is that it gives me video output to an external monitor from the timeline as well as the source window within Premier CS4 ... and I assume it probably speeds up some of the rendering. I just don't feel like I'm getting a really good quality image when I'm using the windows media player or other players on my computer monitors. So I really rely on my external CRT monitor to judge sharpness, density and colors, as well as titles.
    What are you doing for output monitoring, now that you've pulled out the RTX2 card? I've been wondering what other options there might be that would work well with CS4.
    You might check out WinFF -- it seems very fast and so far it's been working well for me. I'm not in PAL. so that might make a difference ...
    On the brightness issue, it might be worth checking to see whether you have the latest video display card drivers -- another user found that made a big difference in image quality. However, I don't think in his case that it was related to his mpeg encodes.
    Bill Matthiesen

  • Camtasia Poor Quality in Premiere CS4 Export

    I am a PC user. One of my clients uses Mac and Camtasia to screen capture his software program, which I need to integrate into a video I am making for his company. The MP4 Camptasia file he sends me looks good. I bring the file into Premiere to edit it, but when I export it, the clip done with Camtasia has very poor quality, while the footage I shot with my video camera looks great.
    Specs:
    Camera: HMC40, PH mode 1080/60i (MPEG-4 AVC/H.264 compression).
    PC: i7 quad-core 64-bit running Windows 7 Professional 64-bit, 8 GB RAM.
    Editor: Premiere CS4 in the Adobe CS4 Master Collection .
    New Sequence setup in Premiere: AVCHD > 1080i > AVCHD 1080i30 (60i) Anamorphic.
    Premiere’s export settings:
    Format: MPEG2
    Preset: HDTV 1080p 29.97 High Quality
    Multiplexer tab > Bitrate and Buffering Details: Variable
    Video Tab > Basic Video Settings > Quality: 5
    Field Order > None (progressive)
    Profile > Main
    Bitrate Settings: Bitrate Encoding: VBR 2Pass
      Minimum Bitrate: 4 (default)
      Target Bitrate: 15 (default)
      Maximum Bitrate: 18.5 (default)
    GOP Settings > M Frames: 3 (default)
      N Frames: 15 (default)
    Output summary: NTSC, 1920X1080, 29.97 drop frame (fps), Progressive, Quality 5.0
    Note in general: I found that if I set the Bitrate Encoding at VBR 1Pass, I got glitches sporadically.Using VBR 2Pass has solved this.
    My question about the Camtasia clip:
    1) How can I get the Camtasia footage to be as sharp in the export as in the original?
    Other questions in general:
    2) Are my New Sequence setting in Premiere correct? AVCHD > 1080i > AVCHD 1080i30 (60i) Anamorphic
    3) Is my choice to export as MPEG2, HDTV 1080p 29.97 High Quality preset, the best for the footage I shoot?
    4) Is my choice to set the Multiplexer tab > Bitrate and Buffering Details at ‘Variable’ the best?
    5) Do my Bitrate and GOP settings need adjustment?
    6) Should my Export field order be Upper instead of Progressive?

    function(){return A.apply(null,[this].concat($A(arguments)))}
    The frame rate is 1038 X 882
    That is a very odd frame size, and one that probably won't work well no matter what workflow you use.  You asked:
    function(){return A.apply(null,[this].concat($A(arguments)))}
    how could he better capture and export to match my workflow?
    Have him capture and export to match your desired export frame size for the finished project.
    function(){return A.apply(null,[this].concat($A(arguments)))}
    How would you suggest I change my workflow to handle the interlaced and progressive issue?
    I can't answer that until I know exactly how you intend to deliver your finished video.  Any answers to your other questions will also likely depend on your intended delivery format and media.
    -Jeff

Maybe you are looking for