Poor Quality HD Channels

I see alot of posts, regarding poor quality HD channels. AMC ,IFC ,FOOD NETWORK, USA in regards to macroblocking, tiling, and audio lag, which I am experiencing in RI. Have called many times regarding this issue. Is Verizon working on this? Is it a problem that can be fixed? From what i understand it is a provider issue.
This problem goes back to 2009. Verizon's big selling point is "crystal clear" channels. They dropped the ball on this one!

forya1 wrote:
Sometimes it is an issue with HDMI especially if you are running through a Home Theater system. Try going direct HDMI, or even Composite (5 RCA Cables) If hooking up composite fixes the problem, then it could be your TV and box aren't getting along well.
Composite cables will NOT transmit an HD signal. I presume you meant Component.
Justin
FiOS TV, 25/25 Internet, and Digital Voice user
QIP7232, QIP7100-P2, IMG 1.9.1
Keller, TX 76248

Similar Messages

Poor quality Skype Video Calls with good connectio...

suffering with Poor quality Skype Video Calls and also voice.
My connection is 8 mb Download and .6mp upload, my wife in another country has Fiber so is alot faster again.
I am using Windows 8.1 and also a Ipad Air, same issues on both.
The Windows Pc has a nice microsoft Hd webcam (not one of the cheapones) using a i7 pc with 16g of Ram and a Gaming Graphics Card.
There is very little software on the pc, a couple of games, no itunes, Downloading software and very little running in the background. I use Window Defender and Anti virus and have recently done a re instal of windows and everything is updated driver and software wise, including skype.
The Ipad is the Apple air.
When connecting to my Wife in the Uk the reception isnt great picture wise and after a little while gets bad and also disconects alot and then comes back with a worse picture and call quality. I have even had the bad connection pop up. I have ran speed tests at these points and all are showing fine.
I also have a issue when calling my Dads land line in the uk where he has trouble hearing what im saying, muffled and echos
I am a premium paying customer and started to get a bit frustrated.

@Furgan, in which country are you located? Some countries and ISP-s are shaping Skype traffic. One known country is Saudi Arabia for example.
If would help us if you could please reproduce the issue and provide logs as described in this link https://support.skype.com/en/faq/FA12321/how-do-i-create-log-files under Skype for Windows Desktop and attach it to your post?
Thank you

Camtasia Poor Quality in Premiere CS4 Export

I am a PC user. One of my clients uses Mac and Camtasia to screen capture his software program, which I need to integrate into a video I am making for his company. The MP4 Camptasia file he sends me looks good. I bring the file into Premiere to edit it, but when I export it, the clip done with Camtasia has very poor quality, while the footage I shot with my video camera looks great.
Specs:
Camera: HMC40, PH mode 1080/60i (MPEG-4 AVC/H.264 compression).
PC: i7 quad-core 64-bit running Windows 7 Professional 64-bit, 8 GB RAM.
Editor: Premiere CS4 in the Adobe CS4 Master Collection .
New Sequence setup in Premiere: AVCHD > 1080i > AVCHD 1080i30 (60i) Anamorphic.
Premiere’s export settings:
Format: MPEG2
Preset: HDTV 1080p 29.97 High Quality
Multiplexer tab > Bitrate and Buffering Details: Variable
Video Tab > Basic Video Settings > Quality: 5
Field Order > None (progressive)
Profile > Main
Bitrate Settings: Bitrate Encoding: VBR 2Pass
Minimum Bitrate: 4 (default)
Target Bitrate: 15 (default)
Maximum Bitrate: 18.5 (default)
GOP Settings > M Frames: 3 (default)
N Frames: 15 (default)
Output summary: NTSC, 1920X1080, 29.97 drop frame (fps), Progressive, Quality 5.0
Note in general: I found that if I set the Bitrate Encoding at VBR 1Pass, I got glitches sporadically.Using VBR 2Pass has solved this.
My question about the Camtasia clip:
1) How can I get the Camtasia footage to be as sharp in the export as in the original?
Other questions in general:
2) Are my New Sequence setting in Premiere correct? AVCHD > 1080i > AVCHD 1080i30 (60i) Anamorphic
3) Is my choice to export as MPEG2, HDTV 1080p 29.97 High Quality preset, the best for the footage I shoot?
4) Is my choice to set the Multiplexer tab > Bitrate and Buffering Details at ‘Variable’ the best?
5) Do my Bitrate and GOP settings need adjustment?
6) Should my Export field order be Upper instead of Progressive?

function(){return A.apply(null,[this].concat($A(arguments)))}
The frame rate is 1038 X 882
That is a very odd frame size, and one that probably won't work well no matter what workflow you use. You asked:
function(){return A.apply(null,[this].concat($A(arguments)))}
how could he better capture and export to match my workflow?
Have him capture and export to match your desired export frame size for the finished project.
function(){return A.apply(null,[this].concat($A(arguments)))}
How would you suggest I change my workflow to handle the interlaced and progressive issue?
I can't answer that until I know exactly how you intend to deliver your finished video. Any answers to your other questions will also likely depend on your intended delivery format and media.
-Jeff

Extreme poor quality in full screen preview and exported movie

I have spend evenings and evenings to create the content of a project.
After dealing with error -108 and extreme poor quality in full screen preview and in exported movies (extreme stuttering) I decided to install my iMac new again.
The error -108 disappeared, but the extreme stuttering still remained in full screen preview and in exported movies.
If I make the preview screen in the iMovie browser as big as possible there is nothing to see of any stuttering.
Now I am getting pretty annoyed and have no clue what to do anymore (how to solve this problem) .....
Anyone any suggestion ?
The orginal video was recorded with a Panasonic HD camcorder.
I do have a mid 2011 iMac with 16GB ram and 256GB SSD and 1TB HD with a complete clean installation
of OS X Lion and iLife. This configuration should be enough to create a proper movie :-(

mantralightroom wrote:
why is it this option disabled? do the generate monitor sized previews increase a lot the cache a lot!
Potentially, yes. The standard Preview is 1024 pixels, longest size. Some people (like Omke) have displays 2560 pixels longest side, potentially increasing file size by over 500%.

DVD poor quality

I just created a DVD but the video quality is too poor to use. I get 'ghosting' or flicker with motion, which is 99% of the content.
A client gave me 14 home-made DVDs containing video of high school basketball games and asked me to create a highlight video. I edited the VOB files in Premiere CS4 (4.1.0) to pull highlights and compile them into a single highlight DVD.
I exported the video to Adobe Media Encoder (4.0.0.374) to create a F4V file to be used on websites. I used the standard preset. The quality of the F4V video is good.
I then used Adobe Dynamic Link to export to Encore CS4 (4.0.0.258). I burned a DVD and the result was a DVD with poor quality.
There is a brief clip in the highlight video that I recorded myself of the athlete providing a short introduction of himself. That clip and the still titles I made look good on the DVD, but the highlight clips from the client's DVDs are very poor.
From some of the discussions I've already read in this forum, I assume I need to change a field option or the Anti-flicker value under Effect Controls or something similar, but haven't figured out what yet. Also, when I make changes to values, do I have to burn a DVD to see the result of the change or is there a better way to preview?
Thanks for your help!
Dan

A client gave me 14 home-made DVDs containing video of high school basketball games and asked me to create a highlight video. I edited the VOB files in Premiere CS4 (4.1.0) to pull highlights and compile them into a single highlight DVD.
It is very likely that the double MPEG-2 encoding is degrading the material too much. Is it possible to get back to the client's original tapes? That would save one MPEG-2 compression. Otherwise, what you have is probably as good as it will get.
Good luck,
Hunt

How do I delete unwanted photos (duplicates, poor quality How do I delete unwanted photos (duplicates, poor quality or old ones thator oones that I just don't want) from my IPhoto Library.I followed the instruction from Help and neither suggestion worked.

How do I delete unwanted photos (duplicates, poor quality or old ones that I just don't want) from my IPhoto Library.I followed the instruction from Help and neither suggestion worked.
Tried to select and press delete key...didn't work
Tried to select, press arrow on lower right and move to trash.. didn't work

select a photo in an event and either drag it to the iPhoto trash or press the delete key - then empty theiPhoto trash an dthe system trash and the photo is totally gone from the system
LN

Poor quality of AVI files playback in Adobe Premier Pro CS6

I tried to play back AVI files loaded from Canon GL2 camera by Premier Pro 2.0. In Adobe Premier Pro CS6 playback I got jitters and poor quality - what is the problem?

1st - More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
2nd - Exactly what is inside the AVI file?
Codec & Format information, with 2 links inside to read
-read both links in reply #1 http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/

Poor quality text in PDF

I am using Acrobat pro X to produce an online brochure. I started producing the brochure in Corel draw using A4 paper size in landscape mode. When I created the PDF by the print command the general quality was very poor, both graphics and text. I experimented with various settings increasing the quality settings for images but it didn't seem to have any significant effect. I then tried placing some of the elements in a Word document and creating a PDF from this document, and again I found that the results were unsatisfactory, a bit better than from Corel but not very good. I have converted many Word documents to PDF in the past without problems. I started a new Word document and this time copied a template for a landscape brochure from Microsoft. This was already populated with some Text-and-Graphics. When I created a PDF from this it was quite good. It was not clear to me what the difference between my basic word document and this new one was. I went through the documents’ settings with a fine tooth comb and the only one I could find was different was the paper size and orientation. I then copied some of my graphics and text to the word brochure document, and this to converted nicely to PDF. I took a note of what appeared to be a somewhat unusual paper size and copied this to the Corel document. When I created a PDF it was now significantly better all the paper size was wrong. I went back from scratch with both the word document and the Corel draw document (those which produce bad PDF files) and carefully made sure that the paper size and orientation in the document matched the PDF settings. But the result was still poor in this case. It is not clear to me what is causing the problem although it does seem to be mainly text, the graphics are often okay. The text however is extremely patchy looking and very poor quality.
In the Acrobat settings I started with "high quality print" default setting and edited this. When I selected the fonts section there were no fonts selected for embedding. This surprised me as I would have thought high-quality print would automatically embedded all fonts. I selected the fonts in my document and embedded them and saved the settings, but when I went out of this dialogue box and straight back in it showed up with no embedded fonts. What's happening here? Is it for getting about my font selection? Or does this dialogue box when you re-enter it not reflect the current settings? Furthermore when I completed my modifications to the "high-quality print" default settings it asked me to save them as a new job options file which I did, but when I go to print a second time it never gives me the option of selecting these saved settings.
I have tried almost every permutation and combination of settings page sizes et cetera and I now tearing my hair out trying to figure out how to simply get a reasonable quality PDF file. Any assistance on these matters would be greatly appreciated.

Hi Michael
I am using Corel V 13 and Windows 7. The issue is not confined to Corel as I am also getting poor results often with Word as described. I also need to know about the font embedding as described above. Is it the case that if the fonts are embedded this
guarantees they fonts display sharply in the PDF? i.e. do the scatty fonts in the PDF prove I am not getting embedded fonts?
Corel does have a printer driver compatibility setting where you can set the target printer, but the PDF virtual printer is not available in the list.
Thanks
Murray

Saving a Project In Pages, Images Poor Quality in PDF

I have just purchased IWork 09, i am new to pages and so far find the software very handy and easy to use to make very attractive documents.
i have one dilemma though.
i save a (e.g.) poster in pages, but when i go to open it in PDF Preview, the images that i have inputted into the document are distorted or of a poor quality, when i open them in pages they are fine?.... also when i go 2 open the saved document in Adobe Reader 9, it wont open? i tried taking frames and shadows etc out just in case they are not supported, like in MS Word but still no luck. i have to send flyers for advertizment via e-mail to clients who are more than likely using Windows Xp or Vista.
if some one could help with
1. Getting my images to stay good quality
2. opening it in adobe 9
it would be very much appreciated
jimbest

You can not see which programs have been involved in each compression, but as far as I know, at least some programs store information about both themselves (last edited by) and the compression level in the exif/iptc data.
The right way to work is to get as much data as possible off the colour capture in high bit and do the exposure correction getting into a normalised colour space either still in high bit or in scaled down 8 bit to save space.
The pixels should be left alone from this phase and out. It is not necessary to change a single source pixel either in matching to the display, the printer or the press. All of this is done on the fly in memory and not be changing the pixels in the disk-based image document.
As interchange file format for corrected colour captures stored in the normalised colour space, either use a linearised RGB space or high-bit CIELab. The file format should be lossless TIFF and not lossy JPEG (the way JPEG works internally is lossy by definition).
Live Picture and Apple Aperture are alike in the way they work. Rather than taking the pixels into memory for correction, which is they way Photoshop worked, they construct a colour managed proxy for manipulation and then provide for a rendering that is non-destructive.
Live Picture required ColorSync 2 and Apple Aperture is unable to work without colour management for the same set of reasons. Apple Pages is unable to work without colour management for the same set of reasons, although there are additional reasons for Apple Pages.
Just my ten cents,
/hh

L5780: first page or 2 print fine then poor quality print

The first few pages of print will be fine but then towards the end of the 3rd page there are horizontal streaks, the next page will be full of them getting worse as the page progresses. I can wait a while (1/2 hour or so) get a good page but then back to the horizontal streaks.
I replaced my print heads in August last year and had some issues with the black and yellow one which HP replaced (both of them went from green status to yellow status fairly quickly). The new print head solved the issue for a while but now for months I've been dealing with this problem.
I have cleaned, aligned and calibrated and now after a 2nd cleaning the yellow print is a very poor quality. I have HP, print heads, HP ink and HP paper. I have the proper paper settings. From what I have read it appears that it could be the black and yellow print head again, but that just seems odd that a 3rd one would go bad in this short time (the first ones I replace in August did not indicate they were bad and were still in a yellow status) . I don't do a great deal of printing and this August was the first time I've replaced the print heads since I got the printer about 4 years ago.
I print most of my items from Micro Soft Word or Micro Soft Digital Image Suite 2006 Editor.

See my answers below:
a) The size of the pages of PDF which you are printing. LETTER
b) Does all pages of the PDF are of same size? YES
c) What is the page size set in the Printer and what is the actual size of the paper which you have put in the tray? LETTER
d) Does this problem also happens on the virtual printer which you might have on your system (Try either Microsoft MPS Document writer or Adobe PDF Printer) No VIRTUAL PRINTERS
Thank you for attempting to help me with this... we have tried everything and haven't been able to resolve the problem.
Sherri

Poor quality image with doing videos with photos/images HELP!

Hello,
I bought Adobe Premiere Element to make videos with pictures. When I do the video, the quality of my photos is good. When I save the video on my computer or I download it on youtube (example) the quality of my photos is extremely poor. Why? Does anyone can help me? Thank you!

What Project Preset did you choose at New Project? In the case of Video, composed of Still Images ONLY, you would set that to your desired delivery specs. Not so, if you are also using Video. I tried several types of parameters. Some parameters give poor quality when I upload it to Youtube (for example) and others in the design of video and upload to YouTube. So which settings should I use for photos only ?
This sounds like you are talking about the Export/Share settings for output to YouTube.
What I was asking is what did you start off with, when you were at New Project?
If you are doing an SD Project, you will have either 720 x 480 (NTSC), or 720 x 576 (PAL) pixels in the Project's Frame Size. If that is what you want, then I would Scale your camera original Stills to 640 x 480 (for NTSC), as you have Square Pixels, and the Project will have either 0.9 for NTSC Standard, or 1.21 for NTSC Widescreen).
PrE can Scale the Still Images, but the Scaling algorithms in Photoshop are much better, and offer more control.
Now, if you wish to do an HD Project, just choose that as your Preset, and then use the Images in about their original size. Note, there will be some black borders, as the screen-caps most likely have a different Aspect Ratio, than a Video Project, which for HD will be 16:9. Especially with screen-caps, that are pretty low resolution to begin with, I would NOT do any Scaling, and would live with the letterboxing, or pillar boxing, rather than Scale and effectively Crop.
Also, when Scaling in Photoshop, I do not Save_As JPEG, as it introduces compression, but only as either PSD (Photoshop's native format), or PNG.
Good luck,
Hunt

Apple TV 2 Mirroring Poor Quality.........

When my iPad 2 mirrors to my Apple TV 2, it goes to a very poor quality.
Help!!
I have tried changing the default resultion on the Apple TV (Menu & Up for 6 seconds), still to no avail

Ok... this is by no means meant to be any exhaustive test but this is what I found out.
I started iTunes Wifi sync with the iphone 4s so it was busy transfering data.
I then started chopper 2, via Airplay with ATV. I immediately noticed the picture quality was poorer. There was noticable video compression artifacts on the screen. The picture seemed much softer.
I then stopped the itunes Wifi sync ..
I restarted chopper 2, and noticed a massive improvement in picture quality.
My take away from this is, you need decent wifi bandwith to get the best possible picture from mirroring, so a Wifi-N router maybe desirable.

IPhoto album to iMovie to iDVD, poor quality of projected images

I am preparing a slide show of digital photo images. The finished product shows poor quality images. I am import the images as an album to iMovie, add a few title slides, then export either to media file or directly to iDVD. The results remain unacceptable when projected on a flat panel HD TV. Where am I going wrong?
Marks 3

If you are using the Share ➙ iDVD menu in iMovie, don't. Use the Share ➙ Media Browser menu option and then drag the movie frome the Media/Movies pane in iDVD into the projects menu window. The Share ➙ iDVD route noticibly degrades the resulting movie. What size movie are you sending to iDVD? It should be Medium or Large.
What size images in iPhoto are you using? They shoujld be cropped to the 4:3 size ratio for iDVD before adding to either iMovie or iDVD.
Have you considered creating the slideshow in iDVD by adding the album of photos via the Media/Photos pane in iDVD. I've found I get better results that way. However, there is a 99 slide limit with that workflow.
What do you mean by poor quality. When going from a photo on your monitor to a TV screen the media gets resized and compressed/encoded down to 640 x 480 which can't duplicate the high resolution of the original image viewed on the monitor.
OT

Poor quality still frames

Does anyone know why still frames are such poor quality?
I'm constructing a movie using stills, and if a Ken Burns effect is used, the picture changing to the next photo as soon as the effect finishes can be a little jarring on the eye.
To counteract this, I've been adding a still frame of 1-2 seconds either side of the main Ken Burns adjusted photo to act as a 'cushion' (like you can in Photo to Movie). You can see the difference in quaity in iMovie, so it does of course remain when you have exported to Quicktime.
Is there a better method of doing this than still frames? I notice that the overlap transition helps by hanging on to the end of the previous frame, but it's not ideal.
Any suggestions?
Quicksilver G4 Mac OS X (10.4.6) Programmes in regular use are Freehand, Photoshop, Freeway, Keynote, iMovie, iDV

Karl, I swear you live inside everyone's browser, with a manual the like of which the rest of us have never seen!
As usual, among the quickest to answer on these forums, and absolutely correct.
It worked like a dream - another major headache removed. Many thanks indeed.

Poor quality Google maps

I seem to be getting really poor quality maps with google in iWeb.
http://jeffnitschke.com/mapissue.html

I couldn't resist.
https://www.youtube.com/watch?v=rznYifPHxDg

Poor Quality HD Channels

Similar Messages

Maybe you are looking for