Poor quality on incomming PSTN call

Hi does anyone know how to fix poor audio quality(scratchy)? I have an SPA3102 and have been having this problem since purchase a couple of weeks ago. Everything else seems to work ok.
Any ides?
Ash

Ok, I did solved this, that was an SIP Client configuration issue with the outbound proxy. So, it works fine with xtensoftphone and twinkle. Freddy.

Similar Messages

SPA3102 can you process incoming PSTN calls without translation into VOIP?

On the SPA3102 is it possible to avoid translation of incoming calls into VOIP and out again. If so does anyone know the SPA3102 setting?
I realise that this would probably lose me quite a lot on incoming call processing options, but the echo on the PSTN line - revealed by the delay caused by the translation - is terrible, and I have tried most things to resolve it!
Many thanks in anticipation for any help you can give.
Mouse

try setting PSTN-To-VoIP Gateway Enable parameter under the PSTN tab to NO -- this should disable the gateway functionality for PSTN to VoIP
btw: try playing with Network Jitter Level under the PSTN tab to resolve the the echo
| isolate! isolate! isolate! |

SPA3102 incoming PSTN call volume

Hi,
Hope I'm in the right place!
I have owned an SPA3102 for several years. Principally used for dialling out on a standard DECT handset via my VOIP provider. This works well with no issues at all.
However, although I do not suffer from echo, I have a problem with call volume if I receive, or make, a call on the BT line. All incoming calls are on the BT line - I have no VOIP number.
I have now upgraded the firmware to 5.2.13(GW002) hoping that something might magically change but it hasn't of course. I'd be really obliged if someone can give me some settings to play with / tweak. I'm pretty technical but the UI is complex so not sure where to start.
Many Thanks,
Jeremy

Some settings that you can try, the info is from the admin guide.
The following 2 are in the PSTN Line tab.
SPA To PSTN Gain - dB of digital gain (or attenuation if negative) to be applied
to the signal sent from the SPA to the PSTN side. The range is -15 to 12.
The default is 0.
PSTN To SPA Gain- dB of digital gain (or attenuation if negative) to be applied
to the signal sent from the PSTN side to the SPA. The range is -15 to 12.
The default is 0.
The following 2 are in the Regional tab.
FXS Port Input Gain - Input gain in dB, up to three decimal places. The range is
6.000 to -12.000.
The default is -3.
FXS Port Output Gain - Output gain in dB, up to three decimal places. The range is
6.000 to -12.000. The Call Progress Tones and DTMF playback level are not affected by the FXS Port Output
Gain parameter.
The default is -3.

SPA3000 - delay in transfering incoming PSTN calls to VoIP phone

I have a SPA3000 connected to a WRT54G switch, "phone" port connected to the handset, and "line" port connected to the PSTN. Incoming calls to the VoIP number work fine - incoming calls on the PSTN line experience a delay of sometimes 12 or 15 rings (seems longer) until the handset rings and I can pick up. Is there a setting that configures this, or is it a firmware /software issue?? Any help much appreciated.

There are a lot of things that can cause it.
Best way to get rid of "ECHO" is to downgrade the firmware to 2.0.13. This fixed many peoples "ECHO" problems.
I've found a lot of reports that the 3.1.7 firmware is plagued with echo problems.
http://forums.whirlpool.net.au/forum-replies-archive.cfm/625349.html
Try the firmware thing, else the best guide is titled:
ELIMINATING ECHO PROBLEMS IN SPA-3000

Answering SRP547W PSTN call

Hi,
I'm running a new SRP547W running the latest firmware.
Firmware Version:
1.2.4 (003) Jan 11 2012
I have 3 phones connected to the unit. Ports 1 & 3 are used for outbound calls using VOIP and are registered to the VOIP provider.
The third phone is connected to phone port 4 and has NO VOIP settings and is not registered.
When an incoming PSTN call is received the phone on port 4 rings likes it should. Phones on ports 1 & 3 don't but that's due to an acknowledged bug.
When I answer the PSTN call by picking up the phone on port 4 the call is not answered. All I get is silence and the person calling me continues to get the phone ringing signal until they hang up.
Any ideas why I cannot answer the call? And what I can do to fix the problem?
Thanks
Gavin

I know its bad form to answer your own questions but I think I've solved it.
I reset the voice settings on the unit back to factory defaults. Put my voip settings back in, changed region to Australia, updated dialplan and now, when I get an incoming call on my PSTN it rings *ALL* the phones (even ones that are registered for voip) and I can answer the call. So I must have mucked up a setting somewhere while I was playing.
If all else fails do a factory defaults and try again :-)
g

Poor quality Skype Video Calls with good connectio...

suffering with Poor quality Skype Video Calls and also voice.
My connection is 8 mb Download and .6mp upload, my wife in another country has Fiber so is alot faster again.
I am using Windows 8.1 and also a Ipad Air, same issues on both.
The Windows Pc has a nice microsoft Hd webcam (not one of the cheapones) using a i7 pc with 16g of Ram and a Gaming Graphics Card.
There is very little software on the pc, a couple of games, no itunes, Downloading software and very little running in the background. I use Window Defender and Anti virus and have recently done a re instal of windows and everything is updated driver and software wise, including skype.
The Ipad is the Apple air.
When connecting to my Wife in the Uk the reception isnt great picture wise and after a little while gets bad and also disconects alot and then comes back with a worse picture and call quality. I have even had the bad connection pop up. I have ran speed tests at these points and all are showing fine.
I also have a issue when calling my Dads land line in the uk where he has trouble hearing what im saying, muffled and echos
I am a premium paying customer and started to get a bit frustrated.

@Furgan, in which country are you located? Some countries and ISP-s are shaping Skype traffic. One known country is Saudi Arabia for example.
If would help us if you could please reproduce the issue and provide logs as described in this link https://support.skype.com/en/faq/FA12321/how-do-i-create-log-files under Skype for Windows Desktop and attach it to your post?
Thank you

Sound quality of incoming calls

I've had my Blackberry for over six months, but I've always had a problem with the quality/clarity of the audio in incoming phone calls. It's very difficult to understand the person on the other end -- particularly, but not only, if the person has an accent of any sort. I want to use the Blackberry as my primary phone, but I can't "get" half of what my callers are saying to me. This does not happen on any other phone.

Hi linjane,
Welcome to the Community,
Whenever you see or feel any unusual in your device always Perform a Battery Pull Restart like this While Device is Powered On remove the Battery wait for a min. then re-insert it back wait till the device take a long Reboot.
And again the voice clearity depends on your Carier or wireless provider signal strength are you having this same sound quality problem while listening to any music files.
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Branch office PSTN call routing

Customer had HQ and Branch office with 512 MPLS line, in HQ alone they had E1 trunk, in branch office for calling PSTN the call should travel via MPLS to HQ, and the branch PSTN call terminated in HQ only, is it a good design or better we need to add ISDN line in branch level to terminate the PSTN call.

Balamurugan:
1) I think it is possible. My R&S skills are oxidized but you can have MPLS VPN configured and use frame-relay as a serial encapsulation where you will be able to configure RTP header compression.
2) RSVP over MPLS: yes. But as Marwashawi said, I prefer to work with the LLQ QOS for voice traffic. For that you will need to agree that with your service provider.
Rad Baver
BALAMURUGAN SINGARAM escribió:Thanks for the reply, branch to branch they are using 512 KBPS with VPN tunnel, g729 codec is used in between HQ and branch, the issuse is voice quality between the branche and HQ, the ping round trip delay is more than 250 MS [ no packet drops ], QOS is applied in switch and CUCM level, could you please light me do we can fine tune more on WAN interface level.1) do it possible to use header compression on MPLS cloud2) do it possible to enable "RSVP" in MPLS link.Could you please light me on how to enable RSVP & Header compression on MPLS link.

Poor Quality HD Channels

I see alot of posts, regarding poor quality HD channels. AMC ,IFC ,FOOD NETWORK, USA in regards to macroblocking, tiling, and audio lag, which I am experiencing in RI. Have called many times regarding this issue. Is Verizon working on this? Is it a problem that can be fixed? From what i understand it is a provider issue.
This problem goes back to 2009. Verizon's big selling point is "crystal clear" channels. They dropped the ball on this one!

forya1 wrote:
Sometimes it is an issue with HDMI especially if you are running through a Home Theater system. Try going direct HDMI, or even Composite (5 RCA Cables) If hooking up composite fixes the problem, then it could be your TV and box aren't getting along well.
Composite cables will NOT transmit an HD signal. I presume you meant Component.
Justin
FiOS TV, 25/25 Internet, and Digital Voice user
QIP7232, QIP7100-P2, IMG 1.9.1
Keller, TX 76248

Branch phone no audio when making outbound PSTN call - inbound and On-Net calls are good

I am trying a new setup. There are no other phones on branch A configured with CUCM so there is no comparison. I setup another phone in Branch B for comparison.
Scenario:
CUCM (ver9) in Main site
Main Site and Branch A site has VPN for WAN connectivity.
Main Site and Branch B site has VPN for WAN connectivity
Branch A phone is registered to Main site CUCM and configured to use same settings as Branch B phone. Branch B phone has no issues at all
Branch A no audio when making PSTN outbound call
Branch A audio is good when receiving INbound PSTN call and inbound/outbound On-Net call
I am not sure if it is a routing issue or something else. Below is an excerpt from the RTM logs which is attached. I believe issue is on this part after call connects where it shows media error but not sure what to do to correct it. Assuming Firewall is not an issue. If we cant find out what is wrong, i will start looking at the firewall.
called number : 0016326635801
calling number: 4168
Phone IP : 10.100.3.29
Main Site Gateway IP : 10.130.3.9 / H323
CUCM : 10.130.3.115/116
=========================================================================================================
57315658.000 |22:32:55.911 |SdlSig |CcAlertReq |outgoing_call_proceeding3 |StationCdpc(3,100,59,74928) |StationD(3,100,58,2238) |3,100,13,119955.3^10.130.3.9^* |[R:N-H:0,N:1,L:0,V:0,Z:0,D:0] CI=60724230 CI.branch=0 FDataType=0opId=0ssType=0 SsKey=0invokeId=0resultExp=Fbpda=F pi.piid=30 pi.l=2 pi2.piid=30 pi2.l=0 pi3.piid=30 pi3.l=0IpAddrMode=0 ipAddrType=0 ipv4=0.0.0.0:0 ctiActive=F ctiFarEndDev=2 ctiCMId=3 media=2 lPart=d8997e28-66b6-7783-a5d6-8f46ef5da368 lPatt=4168 lModNum=tn=0npi=0ti=1nd=4168pi=1si1 lName=locale: 1 Name: India Test UnicodeName: India Test pi: 1 cName=locale: 1 Name: UnicodeName: pi: 0 cn:tn=0npi=0ti=1nd=80016326635801pi=0si1 cVMbox= localPatternUsage=2 connectedPatternUsage=5 lCnPart=e769cfa2-b6d1-b061-1b87-a7658c93fe72 lCnPatt=8.001! rn:tn=0npi=0ti=1nd=80016326635801pi=0si1 lLRPart=e769cfa2-b6d1-b061-1b87-a7658c93fe72 lLRPatt=8.001! lOCdpnPart=e769cfa2-b6d1-b061-1b87-a7658c93fe72 lOCdpnPatt=8.001! oCdpn:tn=0npi=0ti=1nd=80016326635801pi=0si1 oRFR =0 lBridgePartID= lCnBridgePartID= DevCEPN=b5ecff4d-f135-76cd-34a3-6e8adb746d1e lineCEPN=ce6c846c-e5d4-214d-8880-68250ba32103 CnDevCEPN=5265beb5-b11c-6218-5580-48cabc44d380 lrnCEPN=183b0e69-399b-9bd6-a49f-48a4ee886155 oCdpnCEPN=183b0e69-399b-9bd6-a49f-48a4ee886155 lHPMemCEPN= cHPMemCEPN=Supp DTMF=1DTMF Cfg=1DTMF Payload=0 isOffNetDev=T protected=1 geolocInfo={geolocPkid=, filterPkid=, geolocVal=, devType=3} locPkid= locName= deductBW=F fateShareId= videoTrafficClass=0TransparentData=null CanSupportSIPTandN=false TransId=0 AllowBitMask=0x0 UserAgentOrServer= OrigDDName=locale: 1 Name: UnicodeName: pi: 0 mCallerId= mCallerName= ignoreEarlyMedia=F
57315659.000 |22:32:55.911 |SdlSig |CcNotifyReq |call_delivered4 |StationCdpc(3,100,59,74928) |StationD(3,100,58,2238) |3,100,13,119955.4^10.130.3.9^* |[R:N-H:0,N:5,L:0,V:0,Z:0,D:0] CI=60724230 CI.branch=0 lPart=d8997e28-66b6-7783-a5d6-8f46ef5da368 lPatt=4168 lModNum=tn=0npi=0ti=1nd=4168pi=1si1 lName=locale: 1 Name: India Test UnicodeName: India Test pi: 1 cName=locale: 1 Name: UnicodeName: pi: 0 cn:tn=0npi=0ti=1nd=0016326635801pi=1si0 cVMbox= localPatternUsage=2 connectedPatternUsage=5 lCnPart=e769cfa2-b6d1-b061-1b87-a7658c93fe72 lCnPatt=8.001! rn:tn=0npi=0ti=1nd=80016326635801pi=0si1 lLRPart=e769cfa2-b6d1-b061-1b87-a7658c93fe72 lLRPatt=8.001! lOCdpnPart=e769cfa2-b6d1-b061-1b87-a7658c93fe72 lOCdpnPatt=8.001! oCdpn:tn=0npi=0ti=1nd=80016326635801pi=0si1 oRFR =0 lBridgePartID= lCnBridgePartID= DevCEPN=b5ecff4d-f135-76cd-34a3-6e8adb746d1e lineCEPN=ce6c846c-e5d4-214d-8880-68250ba32103 CnDevCEPN=5265beb5-b11c-6218-5580-48cabc44d380 lrnCEPN=183b0e69-399b-9bd6-a49f-48a4ee886155 oCdpnCEPN=183b0e69-399b-9bd6-a49f-48a4ee886155 lHPMemCEPN= cHPMemCEPN= onBehalf= whichSide=1 holdFlag=0 notifyMsg=locale: 1 Name: UnicodeName: promptMsg=locale: 1 Name: UnicodeName: apply Instr=0 s.sv=0 promptMsg.userLocale=1 cgDevName=SEP64D989C258FC ctiActive=F ctiFarEndDev=2 ctiCCMId=3 ctiEvt.evtType=0 ctiEvt.transId=0 ctiEvt.ED.succ=F ctiEvt.PD.ParkPart= secureStatus=(F,0) callState=4 media=1 bitMask=80800000 Supp DTMF=1DTMF Cfg=1DTMF Payload=0 notifiedDName= connType=0 connStatus=0newPL=5newPLDmn=0 networkDomain=suppressMOH=F triggerByJoin=F NotifInd= ni.niid=39 ni.l=0 ni.nnd=0deviceCepn= partitionSearchSpace= geolocInfo=null locPkid= locName= deductBW=F fateShareId= videoTrafficClass=0 dtmMcNodeId=0 dtmCurrentCi=0 isOffNetDevice=T ignCntH=F cmDeviceType=7 ssCause=0TransparentData=null CanSupportSIPTandN=false TransId=0 AllowBitMask=0x0 UserAgentOrServer= OrigDDName=locale: 1 Name: UnicodeName: pi: 0 mCallerId= mCallerName= FDataType=0opId=0ssType=0 SsKey=0invokeId=0resultExp=Fbpda=F mobilityEventType=0 CallInstanceNumber=0
57315660.000 |22:32:55.911 |SdlSig |StationOutputCallState |restart0 |StationD(3,100,58,2238) |StationCdpc(3,100,59,74928) |3,100,13,119955.3^10.130.3.9^* |[R:N-H:0,N:5,L:0,V:0,Z:0,D:0] State=3 privacy=0 Line=1 CI=60724230 SCCP P-level=4 P-Domain=0
57315660.001 |22:32:55.911 |AppInfo |StationD: (0002238) CallState callState=3 lineInstance=1 callReference=60724230 privacy=0 sccp_precedenceLv=4 precedenceDm=0
57315661.000 |22:32:55.911 |SdlSig |StationOutputSelectSoftKeys |restart0 |StationD(3,100,58,2238) |StationCdpc(3,100,59,74928) |3,100,13,119955.3^10.130.3.9^* |[R:N-H:0,N:4,L:0,V:0,Z:0,D:0] Line=1 CI=60724230 SKIndex=8 Mask=ffffffff
57315661.001 |22:32:55.911 |AppInfo |StationD: (0002238) SelectSoftKeys instance=1 reference=60724230 softKeySetIndex=8 validKeyMask=ffffffff.
57315662.000 |22:32:55.911 |SdlSig |StationOutputDisplayPromptStatus |restart0 |StationD(3,100,58,2238) |StationCdpc(3,100,59,74928) |3,100,13,119955.3^10.130.3.9^* |[R:N-H:0,N:3,L:0,V:0,Z:0,D:0] TimeOut=0 Status= UnicodeStatus= Line=1 CI=60724230
57315662.001 |22:32:55.911 |AppInfo |StationD: (0002238) DisplayPromptStatus timeOut=0 Status='' content='Ring Out' line=1 CI=60724230 ver=85720016.
57315663.000 |22:32:55.911 |SdlSig |StationOutputCallInfo |restart0 |StationD(3,100,58,2238) |StationCdpc(3,100,59,74928) |3,100,13,119955.3^10.130.3.9^* |[R:N-H:0,N:2,L:0,V:0,Z:0,D:0] cdpn="80016326635801" cdpnVMB="" cdpnParty="locale: 1 Name: UnicodeName: pi: 0" cgpn="4168" cgpnVMB="" cgpnParty="locale: 1 Name: India Test UnicodeName: India Test pi: 1" oCdpn="80016326635801" oCdpnVMb="" oCdpnParty="locale: 1 Name: UnicodeName: pi: 0" OCdpnReason="0" lCdpn="80016326635801" lCdpnVMb="" lCdpnParty="locale: 1 Name: UnicodeName: pi: 0" lCdpnReason="0" line="1" CI="60724230" callInstance="1" callType="2" CallSecurityStatusType="0" restrictionBits="0" huntPilot="" huntPilotParty="locale: 1 Name: UnicodeName: pi: 0"
57315663.001 |22:32:55.911 |AppInfo |StationD: (0002238) (3,100,13,119947) CallInfo callingPartyName='India Test' callingParty=4168 cgpnVoiceMailbox= alternateCallingParty= calledPartyName='' calledParty=80016326635801 cdpnVoiceMailbox= originalCalledPartyName='' originalCalledParty=80016326635801 originalCdpnVoiceMailbox= originalCdpnRedirectReason=0 lastRedirectingPartyName='' lastRedirectingParty=80016326635801 lastRedirectingVoiceMailbox= lastRedirectingReason=0 callType=2(OutBound) lineInstance=1 callReference=60724230. version: 85720016
57315664.000 |22:32:55.911 |SdlSig |DSetCallState |restart0 |StationD(3,100,58,2238) |StationCdpc(3,100,59,74928) |3,100,13,119955.3^10.130.3.9^* |[R:N-H:0,N:1,L:0,V:0,Z:0,D:0] CallState = call_delivered4
57315664.001 |22:32:55.911 |AppInfo |StationD: (0002238) DEBUG- star_DSetCallState(7) State of cdpc(74928) is 6.
57315665.000 |22:32:55.911 |SdlSig |StationOutputCallInfo |restart0 |StationD(3,100,58,2238) |StationCdpc(3,100,59,74928) |3,100,13,119955.4^10.130.3.9^* |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] cdpn="0016326635801" cdpnVMB="" cdpnParty="locale: 1 Name: UnicodeName: pi: 0" cgpn="4168" cgpnVMB="" cgpnParty="locale: 1 Name: India Test UnicodeName: India Test pi: 1" oCdpn="80016326635801" oCdpnVMb="" oCdpnParty="locale: 1 Name: UnicodeName: pi: 0" OCdpnReason="0" lCdpn="80016326635801" lCdpnVMb="" lCdpnParty="locale: 1 Name: UnicodeName: pi: 0" lCdpnReason="0" line="1" CI="60724230" callInstance="1" callType="2" CallSecurityStatusType="0" restrictionBits="0" huntPilot="" huntPilotParty="locale: 1 Name: UnicodeName: pi: 0"
57315665.001 |22:32:55.911 |AppInfo |StationD: (0002238) (3,100,13,119947) CallInfo callingPartyName='India Test' callingParty=4168 cgpnVoiceMailbox= alternateCallingParty= calledPartyName='' calledParty=0016326635801 cdpnVoiceMailbox= originalCalledPartyName='' originalCalledParty=80016326635801 originalCdpnVoiceMailbox= originalCdpnRedirectReason=0 lastRedirectingPartyName='' lastRedirectingParty=80016326635801 lastRedirectingVoiceMailbox= lastRedirectingReason=0 callType=2(OutBound) lineInstance=1 callReference=60724230. version: 85720016
57315666.000 |22:32:55.911 |Created | | |SdlTCPConnection(3,100,13,119956) |SdlTCPConnector(3,100,12,106644) | |NumOfCurrentInstances: 101
57315667.000 |22:32:55.911 |Stopping | | |SdlTCPConnector(3,100,12,106644) |SdlTCPConnector(3,100,12,106644) | |NumOfCurrentInstances: 1
57315668.000 |22:32:55.912 |SdlSig |H245TcpConnectionInfo |waitForSdlRsp |TranslateAndTransport(3,100,21,53370) |H245Handler(3,100,29,1) |3,100,12,106644.1^*^* |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0]
57315668.001 |22:32:55.912 |AppInfo |TranslateAndTransport(53370)::waitForSdlRsp_H245TcpConnectionInfo - received H245TcpConnectionInfo from H245Handler
57315669.000 |22:32:55.912 |SdlSig |TtControlChannelEstablished |waitForTransportEstablishment |H245SessionManager(3,100,28,53370) |TranslateAndTransport(3,100,21,53370) |3,100,12,106644.1^*^* |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0]
57315670.000 |22:32:55.915 |SdlSig |SdlDataInd |wait |H245Handler(3,100,29,1) |SdlTCPConnection(3,100,13,119956) |3,100,13,119956.2^*^* |*TraceFlagOverrode
57315670.001 |22:32:55.915 |AppInfo |H245ASN - TtPid=(53370) [0xb42276e0 1964 bytes] -Incoming #455653 -value MultimediaSystemControlMessage ::= request : terminalCapabilitySet :
sequenceNumber 1,
protocolIdentifier { 0 0 8 245 0 7 },
multiplexCapability h2250Capability :
maximumAudioDelayJitter 20,
receiveMultipointCapability
multicastCapability FALSE,
multiUniCastConference FALSE,
mediaDistributionCapability
centralizedControl FALSE,
distributedControl FALSE,
centralizedAudio FALSE,
distributedAudio FALSE,
centralizedVideo FALSE,
distributedVideo FALSE
transmitMultipointCapability
multicastCapability FALSE,
multiUniCastConference FALSE,
mediaDistributionCapability
centralizedControl FALSE,
distributedControl FALSE,
centralizedAudio FALSE,
distributedAudio FALSE,
centralizedVideo FALSE,
distributedVideo FALSE
receiveAndTransmitMultipointCapability
multicastCapability FALSE,
multiUniCastConference FALSE,
mediaDistributionCapability
centralizedControl FALSE,
distributedControl FALSE,
centralizedAudio FALSE,
distributedAudio FALSE,
centralizedVideo FALSE,
distributedVideo FALSE
mcCapability
centralizedConferenceMC FALSE,
decentralizedConferenceMC FALSE
rtcpVideoControlCapability FALSE,
mediaPacketizationCapability
h261aVideoPacketization FALSE
logicalChannelSwitchingCapability FALSE,
t120DynamicPortCapability FALSE
capabilityTable
capabilityTableEntryNumber 27,
capability receiveUserInputCapability : basicString : NULL
capabilityTableEntryNumber 3,
capability receiveAudioCapability : g711Ulaw64k : 20
capabilityDescriptors
capabilityDescriptorNumber 1,
simultaneousCapabilities
3
27
57315670.002 |22:32:55.915 |AppInfo |DET-H245Log-- : H323-2833. H245CapabilityDefinition lookupOutBandSignalCapEntry: entryNumber=27, receiveInputCap=2
57315670.003 |22:32:55.915 |AppInfo |DET-H245Log-- : H323-2833. H245CapabilityDefinition lookupOutBandSignalCapEntry: No SignalType UserInputCapability, put Alphanumeric type back, entryNumber=27, UserCap=2,
57315671.000 |22:32:55.915 |SdlSig |CeseTerminalCapabilitySet |wait |TranslateAndTransport(3,100,21,53370) |H245Handler(3,100,29,1) |3,100,13,119956.2^*^* |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] SeqNo=1 len=1964 TCS heap-> 0xb42276e0 capCount=2
57315672.000 |22:32:55.915 |SdlSig |SdlDataInd |wait |H245Handler(3,100,29,1) |SdlTCPConnection(3,100,13,119956) |3,100,13,119956.3^*^* |*TraceFlagOverrode
57315672.001 |22:32:55.915 |AppInfo |H245ASN - TtPid=(53370) [0xb27ceab8 1444 bytes] -Incoming #455654 -value MultimediaSystemControlMessage ::= request : masterSlaveDetermination :
terminalType 60,
statusDeterminationNumber 8220
57315673.000 |22:32:55.915 |SdlSig |MsdseMasterSlaveDetermination |wait |TranslateAndTransport(3,100,21,53370) |H245Handler(3,100,29,1) |3,100,13,119956.3^*^* |[R:N-H:0,N:1,L:0,V:0,Z:0,D:0]
57315674.000 |22:32:55.915 |SdlSig |CeseTerminalCapabilitySet |paused |CeseIncoming(3,100,20,53370) |TranslateAndTransport(3,100,21,53370) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:1,L:0,V:0,Z:0,D:0] SeqNo=1 len=1964 TCS heap-> 0xb42276e0 capCount=2
57315675.000 |22:32:55.915 |SdlSig |MsdseMasterSlaveDetermination |paused |Msdse(3,100,23,53370) |TranslateAndTransport(3,100,21,53370) |3,100,13,119956.3^10.130.3.9^Port 49839 |[R:N-H:0,N:1,L:0,V:0,Z:0,D:0]
57315676.000 |22:32:55.915 |SdlSig-S |MsdseMasterSlaveDetermination |paused |Msdse(3,100,23,53370) |TranslateAndTransport(3,100,21,53370) |3,100,13,119956.3^10.130.3.9^Port 49839 |
57315677.000 |22:32:55.915 |SdlSig |CeseTransferIndication |capabilityExchange |H245SessionManager(3,100,28,53370) |CeseIncoming(3,100,20,53370) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] len=1964 TCS heap-> 0xb42276e0 capCount=2
57315678.000 |22:32:55.915 |SdlSig |H245CapabilitiesIncomingIndication |waitForCapabilitiesExchange |H245Interface(3,100,185,53370) |H245SessionManager(3,100,28,53370) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:1,L:0,V:0,Z:0,D:0] len=1964 TCS heap-> 0xb42276e0 capCount=2
57315678.001 |22:32:55.915 |AppInfo |DET-H245Interface-(53370), star_H245CapabilitiesIncoming , received sdpMode = 0, videoCapable=0, dataCapable=0, videoSetupAfterAudio= 0,mMXOfferNeeded= 0
57315678.002 |22:32:55.915 |AppInfo |DET-H245Interface-(53370)::convertH245CapabilitiesToCapabilities, H323-2833. Incoming OOB user Input Cap choice =2, oobUserInputCap=1
57315678.003 |22:32:55.915 |AppInfo |DET-H245Interface-(53370)::convertH245CapabilitiesToCapabilities, cmCloudH245ICTVersion(0), H323-2833. After incoming TCS DTMFProfile updated, DTMF Method=1, 2833 payloadNum=0, OOB cap=1
57315678.004 |22:32:55.915 |AppInfo |DET-MediaUtility-::getCodecPrefOption, xferModeA=7 xferModeB=4 honorOfferCodecPrefA=0 honorOfferCodecPrefB=0 PREF_LIST
57315678.005 |22:32:55.915 |AppInfo |DET-MediaUtility-::setCodecPrefOptionAndRegionB, audioPassThru=0 myRegion=SIN-REG peerRegion=SIN-REG farEndRegion= regionB=SIN-REG PREF_LIST
57315678.006 |22:32:55.915 |AppInfo |DET-H245Interface-(53370)::setCodecPrefOptionAndOtherSideRegion, otherSideRegion=SIN-REG, PREF_LIST
57315678.007 |22:32:55.915 |AppInfo |DET-RegionsServer::sortMediaPayload-capCount=1, regionA=SIN-REG, regionB=SIN-REG, fkCodecList=911b707a-7d0e-c4cb-cc2a-89b4178491da
57315678.008 |22:32:55.915 |AppInfo |DET-MediaUtility-::getCodecPrefOption, xferModeA=7 xferModeB=4 honorOfferCodecPrefA=0 honorOfferCodecPrefB=0 PREF_LIST
57315678.009 |22:32:55.915 |AppInfo |DET-MediaUtility-::setCodecPrefOptionAndRegionB, audioPassThru=0 myRegion=SIN-REG peerRegion=SIN-REG farEndRegion= regionB=SIN-REG PREF_LIST
57315678.010 |22:32:55.915 |AppInfo |DET-H245Interface-(53370)::setCodecPrefOptionAndOtherSideRegion, otherSideRegion=SIN-REG, PREF_LIST
57315678.011 |22:32:55.915 |AppInfo |DET-RegionsServer::matchCapabilities-- savedOption=1, PREF_LIST, regionA=SIN-REG regionB=SIN-REG latentCaps(A=0, B=0) kbps=64, capACount=1, capBCount=0
57315678.012 |22:32:55.915 |AppInfo |RegionsServer: applyCodecFilterIfNeeded - no codecs remained after filtering so restored original 0 caps
57315679.000 |22:32:55.915 |SdlSig |CeseTransferResponse |paused |CeseIncoming(3,100,20,53370) |H245SessionManager(3,100,28,53370) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:1,L:0,V:0,Z:0,D:0]
57315680.000 |22:32:55.915 |SdlSig-S |CeseTransferResponse |paused |CeseIncoming(3,100,20,53370) |H245SessionManager(3,100,28,53370) |3,100,13,119956.2^10.130.3.9^Port 49839 |
57315681.000 |22:32:55.915 |SdlSig |MXCapabilitiesIncoming |waitInterfacesCapabilities |MediaExchange(3,100,138,127079) |H245Interface(3,100,185,53370) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] audioCapCount=1 Caps[4(20)] videoCapCount=0, [] extendedVidCount=0, [] Supp.Payload RFC[0 0 0 0 0 ] h245ICTVersion0 useOldGWBytesForGSMConversion=F cryptoCapCount=0 cryptoVidDataCapCount=0 DTMF Profile(1,1,0,1,F)LatentCaps=null
57315681.001 |22:32:55.915 |AppInfo |DET-MediaExchange-(127079)::canForwardCapsToOtherEnd, activeCapEnabled(0, 0), canForwardCapsToOtherEnd=0
57315681.002 |22:32:55.915 |AppInfo |DET-MediaExchange-(127079)::finishCapExchange, capFromTwoIFs=1,capFromFarEnd=0,aPT=0,vPT=2,capE2E=0,capDone=1
57315681.003 |22:32:55.915 |AppInfo |DET-MediaExchange-(127079)::handleInterfaceVisited, returned finishCapExchange
57315681.004 |22:32:55.915 |AppInfo |DET-MediaExchange-(127079)::handleInterfaceVisited, allowReConnect(1) partyAHasCapsorACE(1)partybHasCapsorACE (0)
57315682.000 |22:32:55.915 |SdlSig |AuReConnectRequest |waitDisconnect |MediaManager(3,100,133,117676) |MediaExchange(3,100,138,127079) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] Party1: MR=0 CI=60724230 audioCapCount=9 region=SIN-REG xferMode=4 mrid=0 audioId=0 MMCap=0x1 activeCap=0 cryptoCapCount=0 flushIns=0 dtmCall=0 dtmPrimaryCI=0 IFPid=(3,100,234,63534) dtMedia=F honorCodec=F EOType=0 MohType=0DTMF Caps(1,1,0,1,F) confID=0 connType=3 connStatus=0 mtpPre=F teleEve=0 IFCreated=T IFHandling=0 FS=0 mcNodeId=0LatentCaps=null Party2: MR=0 CI=60724231 audioCapCount=1 region=SIN-REG xferMode=7 mrid=0 audioId=0 MMCap=0x9 activeCap=0 cryptoCapCount=0 flushIns=0 dtmCall=0 dtmPrimaryCI=0 IFPid=(3,100,185,53370) dtMedia=F honorCodec=F EOType=0 MohType=0DTMF Caps(1,1,0,1,F) confID=0 connType=3 connStatus=0 mtpPre=F teleEve=0 IFCreated=T IFHandling=0 FS=0 mcNodeId=0LatentCaps=null reConnType=0 videoCall=F AllowedCallType=0x0 mtpChanged=F precLvl=5 resCap=0 party1.mMediaCoordinatorNodeId=0 party2.mMediaCoordinatorNodeId=0
57315682.001 |22:32:55.915 |AppInfo |SIG-MediaManager-(117676)::waitDisconnect_AuReConnectRequest, reConnectType(0)
57315682.002 |22:32:55.915 |AppInfo |DET-MediaManager-(117676)::waitDisconnect_AuReConnectRequest, Update AuConnectRequestMsg party capability. isDeviceVideoCapable (party1=0, party2=0) AllowedCallType=0x00000000
57315682.003 |22:32:55.915 |AppInfo |DET-MediaManager-(117676)::waitDisconnect_AuReConnectRequest, ReConnect--sending disconnect, Party1DTMFmethod(1) Party2DTMFMethod(1)
57315683.000 |22:32:55.915 |SdlSig |AuDisconnectRequest |waitCleanup |MediaManager(3,100,133,117676) |MediaManager(3,100,133,117676) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] CI1=60724230 CI2=60724231 sc=0 disconnType=0 ssReason=1 clearType=0 IF1Created=T IF2Created=T party1.mMediaCoordinatorNodeId=0 party2.mMediaCoordinatorNodeId=0 party1.dtmCall=0 party2.dtmCall=0 reconnectPending=F forceStop=F
57315683.001 |22:32:55.915 |AppInfo |!!ERROR!! -MediaManager-(117676)::handle_AuDisconnectRequest, mCleanupPreallocatedMTP=0
57315683.002 |22:32:55.915 |AppInfo |DET-MediaManager-(117676)::handle_AuDisconnectRequest, mrid(0,0) ci(6072423060724231) size(1), dt(0)
57315683.003 |22:32:55.915 |AppInfo |DET-MediaManager-(117676)::keepMTPConnection, sr(1), resrcAllocateSide(0), party1CI(60724230), bRet(0)
57315683.004 |22:32:55.915 |AppInfo |DET-MediaManager-(117676) - sendDisconnectReqToMX - disconnType=0, Party1DTMFmethod(1) Party2DTMFMethod(1) party1capCount(9) party2capCount(0), MC(0,0), deviceVideoCap(0, 0)
57315684.000 |22:32:55.915 |SdlSig |AuDisconnectRequest |waitInterfacesCapabilities |MediaExchange(3,100,138,127079) |MediaManager(3,100,133,117676) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] CI1=60724230 CI2=60724231 sc=0 disconnType=0 ssReason=1 clearType=0 IF1Created=T IF2Created=T party1.mMediaCoordinatorNodeId=0 party2.mMediaCoordinatorNodeId=0 party1.dtmCall=0 party2.dtmCall=0 reconnectPending=F forceStop=F
57315684.001 |22:32:55.915 |AppInfo |DET-MediaExchange-(127079)::wait_Disconnect, dt=0,stReason=1,IFHandling(0,0)
57315685.000 |22:32:55.915 |SdlSig-Q |MXInterfaceEstablished |waitStopped |MediaExchange(3,100,138,127079) |AgenaInterface(3,100,234,63534) |3,100,13,119955.3^10.130.3.9^* |
57315686.000 |22:32:55.915 |SdlSig-D |MXInterfaceEstablished |waitStopped |MediaExchange(3,100,138,127079) |AgenaInterface(3,100,234,63534) |3,100,13,119955.3^10.130.3.9^* |
57315687.000 |22:32:55.915 |SdlSig |MXInterfaceStopStreaming |waitForMXCapabilitiesorOfferorAnswer |AgenaInterface(3,100,234,63534) |MediaExchange(3,100,138,127079) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:1,L:0,V:0,Z:0,D:0] ClearType= 0 StoppedBy= 0 DisconnecType= 0 StopStreamingReason=1 reconPending= FmHoldingPartyCI= 0mForceStop= F
57315687.001 |22:32:55.915 |AppInfo |DET-AgenaInterfaceBase-(63534)::closeRecvForAllAudioChannels, mAudioIncomingLC2AGIDMap size = 0
57315688.000 |22:32:55.915 |SdlSig |MXInterfaceStopStreaming |waitForCapabilitiesExchange |H245Interface(3,100,185,53370) |MediaExchange(3,100,138,127079) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:1,L:0,V:0,Z:0,D:0] ClearType= 0 StoppedBy= 0 DisconnecType= 0 StopStreamingReason=1 reconPending= FmHoldingPartyCI= 0mForceStop= F
57315688.001 |22:32:55.915 |AppInfo |DET-H245Interface-(53370)::handleStopStreaming, stopStreamingRecdInWaitForCapExchgState=0
57315688.002 |22:32:55.915 |AppInfo |DET-H245Interface-(53370)::handleStopStreaming, mInitialCallSendDumyCapsIfNeeded=1
57315689.000 |22:32:55.915 |SdlSig |MXInterfaceStoppedStreaming |waitStopped |MediaExchange(3,100,138,127079) |AgenaInterface(3,100,234,63534) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:1,L:0,V:0,Z:0,D:0]
57315690.000 |22:32:55.915 |SdlSig |MXInterfaceStoppedStreaming |waitStopped |MediaExchange(3,100,138,127079) |H245Interface(3,100,185,53370) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0]
57315690.001 |22:32:55.915 |Stopping | | |MediaExchange(3,100,138,127079) |MediaExchange(3,100,138,127079) | |NumOfCurrentInstances: 1
57315691.000 |22:32:55.915 |SdlSig |MXNewParentPid |restart |AgenaInterface(3,100,234,63534) |MediaExchange(3,100,138,127079) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:2,L:0,V:0,Z:0,D:0] parent pid:nodeId=3.PN=134.PI=1.vPT=2 allow2833=F injectDigitstoMTP=F subscribetoMTP=F passthru2833=F
57315692.000 |22:32:55.915 |SdlSig |MXNewParentPid |waitReconnect |H245Interface(3,100,185,53370) |MediaExchange(3,100,138,127079) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:1,L:0,V:0,Z:0,D:0] parent pid:nodeId=3.PN=134.PI=1.vPT=2 allow2833=F injectDigitstoMTP=F subscribetoMTP=F passthru2833=F
57315693.000 |22:32:55.915 |SdlSig |AuDisconnectReply |waitCleanup |MediaManager(3,100,133,117676) |MediaExchange(3,100,138,127079) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] CI1=60724230 CI2=60724231 sc=0 disconnType=0 ssReason=1 clearType=0 IF1Created=T IF2Created=T party1.mMediaCoordinatorNodeId=0 party2.mMediaCoordinatorNodeId=0 party1.dtmCall=0 party2.dtmCall=0 reconnectPending=F forceStop=F
57315693.001 |22:32:55.915 |AppInfo |DET-MediaManager-(117676)::waitCleanup_AuDisconnectReply, CI(60724230,60724231), disconnType(0), stopStreamingReason(1) DTMFMethod(1 1),MC(0,0),rf(1), nD(1,1)
57315693.002 |22:32:55.915 |AppInfo |DET-MediaManager-(117676)::waitCleanup_AuDisconnectReply, videoCap (0, 0), AllowedCallType=0
57315693.003 |22:32:55.915 |AppInfo |SIG-MediaManager-(117676)::waitCleanup_AuDisconnectReply - recv all disconn replies, send ReConnReq to MC, reConnectType(0), party(60724230,60724231) mrid(0 0) party1DTMF(1 1 0) part2DTMF(1 1 0), MC(0,0), deviceVideo (0, 0), AllowedCallType=0x00000000
57315693.004 |22:32:55.915 |Stopping | | |MediaManager(3,100,133,117676) |MediaManager(3,100,133,117676) | |NumOfCurrentInstances: 1
57315694.000 |22:32:55.915 |SdlSig |AuReConnectRequest |wait |MediaCoordinator(3,100,134,1) |MediaManager(3,100,133,117676) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] Party1: MR=0 CI=60724230 audioCapCount=9 region=SIN-REG xferMode=4 mrid=0 audioId=0 MMCap=0x1 activeCap=0 cryptoCapCount=0 flushIns=0 dtmCall=0 dtmPrimaryCI=0 IFPid=(3,100,234,63534) dtMedia=F honorCodec=F EOType=0 MohType=0DTMF Caps(1,1,0,1,F) confID=0 connType=3 connStatus=0 mtpPre=F teleEve=0 IFCreated=T IFHandling=0 FS=0 mcNodeId=0LatentCaps=null Party2: MR=0 CI=60724231 audioCapCount=1 region=SIN-REG xferMode=7 mrid=0 audioId=0 MMCap=0x9 activeCap=0 cryptoCapCount=0 flushIns=0 dtmCall=0 dtmPrimaryCI=0 IFPid=(3,100,185,53370) dtMedia=F honorCodec=F EOType=0 MohType=0DTMF Caps(1,1,0,1,F) confID=0 connType=3 connStatus=0 mtpPre=F teleEve=0 IFCreated=T IFHandling=0 FS=0 mcNodeId=0LatentCaps=null reConnType=0 videoCall=F AllowedCallType=0x0 mtpChanged=F precLvl=5 resCap=0 party1.mMediaCoordinatorNodeId=0 party2.mMediaCoordinatorNodeId=0
57315694.001 |22:32:55.915 |AppInfo |SIG-MediaCoordinator-wait_AuReConnectRequest, reConnectType(0)
57315694.002 |22:32:55.915 |AppInfo |SIG-MediaCoordinator-wait_AuReConnectRequest - removing MediaManager(117676) from connection list
57315695.000 |22:32:55.915 |SdlSig |AuConnectRequest |wait |MediaCoordinator(3,100,134,1) |MediaCoordinator(3,100,134,1) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] Party1: MR=0 CI=60724230 audioCapCount=9 region=SIN-REG xferMode=4 mrid=0 audioId=0 MMCap=0x1 activeCap=0 cryptoCapCount=0 flushIns=0 dtmCall=0 dtmPrimaryCI=0 IFPid=(3,100,234,63534) dtMedia=F honorCodec=F EOType=0 MohType=0DTMF Caps(1,1,0,1,F) confID=0 connType=3 connStatus=0 mtpPre=F teleEve=0 IFCreated=T IFHandling=0 FS=0 mcNodeId=0LatentCaps=null Party2: MR=0 CI=60724231 audioCapCount=1 region=SIN-REG xferMode=7 mrid=0 audioId=0 MMCap=0x9 activeCap=0 cryptoCapCount=0 flushIns=0 dtmCall=0 dtmPrimaryCI=0 IFPid=(3,100,185,53370) dtMedia=F honorCodec=F EOType=0 MohType=0DTMF Caps(1,1,0,1,F) confID=0 connType=3 connStatus=0 mtpPre=F teleEve=0 IFCreated=T IFHandling=0 FS=0 mcNodeId=0LatentCaps=null reConnType=0 videoCall=F AllowedCallType=0x0 mtpChanged=F precLvl=5 resCap=0 party1.mMediaCoordinatorNodeId=0 party2.mMediaCoordinatorNodeId=0
57315695.001 |22:32:55.915 |Created | | |MediaManager(3,100,133,117677) |MediaCoordinator(3,100,134,1) | |NumOfCurrentInstances: 1
57315695.002 |22:32:55.915 |AppInfo |SIG-MediaCoordinator-wait_AuConnectRequest - new MediaManager(133,117677) started
57315696.000 |22:32:55.915 |SdlSig |AuConnectRequest |waitConnectRequest |MediaManager(3,100,133,117677) |MediaCoordinator(3,100,134,1) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] Party1: MR=0 CI=60724230 audioCapCount=9 region=SIN-REG xferMode=4 mrid=0 audioId=0 MMCap=0x1 activeCap=0 cryptoCapCount=0 flushIns=0 dtmCall=0 dtmPrimaryCI=0 IFPid=(3,100,234,63534) dtMedia=F honorCodec=F EOType=0 MohType=0DTMF Caps(1,1,0,1,F) confID=0 connType=3 connStatus=0 mtpPre=F teleEve=0 IFCreated=T IFHandling=0 FS=0 mcNodeId=0LatentCaps=null Party2: MR=0 CI=60724231 audioCapCount=1 region=SIN-REG xferMode=7 mrid=0 audioId=0 MMCap=0x9 activeCap=0 cryptoCapCount=0 flushIns=0 dtmCall=0 dtmPrimaryCI=0 IFPid=(3,100,185,53370) dtMedia=F honorCodec=F EOType=0 MohType=0DTMF Caps(1,1,0,1,F) confID=0 connType=3 connStatus=0 mtpPre=F teleEve=0 IFCreated=T IFHandling=0 FS=0 mcNodeId=0LatentCaps=null reConnType=0 videoCall=F AllowedCallType=0x0 mtpChanged=F precLvl=5 resCap=0 party1.mMediaCoordinatorNodeId=0 party2.mMediaCoordinatorNodeId=0
57315696.001 |22:32:55.915 |AppInfo |SIG-MediaManager-(117677)::wait_AuConnectRequest, CI(60724230,60724231), capCount(9,1), mcNodeId(0,0), xferMode(4,7), reConnectType(0), mrid (0, 0) IFCreated(1 1) proIns(63534 53370), AC(0,0), party1DTMF(1 1 0 1 0) party2DTMF(1 1 0 1 0),reConnFlag=1, connType(3,3), IFHand(0,0),MTP(0,0),MRGL(5212b81b-1ba4-b897-0a93-0125344b429e,5212b81b-1ba4-b897-0a93-0125344b429e) videoCap(0 0), mmCallType(0),FS(0,0), IpAddrMode(0 0) aPid(3, 58, 2238), bPid(3, 189, 55784) EOType(0 0) MOHAnnConnType(0 0) honorCodec(0 0)
57315697.000 |22:32:55.915 |SdlSig |CACInfoReq |wait |ReservationMgr(3,100,103,1) |MediaManager(3,100,133,117677) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] CI= 0 aCI=60724230 bCI=60724231
57315698.000 |22:32:55.915 |SdlSig |CACInfoReq |active |LBMInterface(3,100,169,1) |ReservationMgr(3,100,103,1) |3,100,13,119956.2^10.130.3.9^Port 49839 |[T:N-H:0,N:0,L:0,V:0,Z:0,D:0] CI= 0 aCI=60724230 bCI=60724231
57315698.001 |22:32:55.915 |AppInfo |LBMIF: CI: 60724230 INFOREQ 3,100,58,2238
57315698.002 |22:32:55.915 |AppInfo |LBMIF: CI: 60724231 INFOREQ' 3,100,189,55784
57315699.000 |22:32:55.915 |SdlSig |CACInfoRes |wait |ReservationMgr(3,100,103,1) |LBMInterface(3,100,169,1) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] CI= 0 aCI=60724230 bCI=60724231 pol=0 rsvpStatus=1 sessJoined=F staIdx_no_agent=0 AudioBWReserved eoSent=F aAgent: confID =0 ci =0 capCt =0 reg= mtpType =2 agentCt =0 mmCapSet=0 agentAllo =0 RemoAgent=F DevCap=0 ipAddrMode=0 bAgent: confID =0 ci =0 capCt =0 reg= mtpType =2 agentCt =0 mmCapSet=0 agentAllo =0 RemoAgent=F DevCap=0 ipAddrMode=0 aPort: NumPort =0 bPort: NumPort =0 otherAgentPort: NumPort =0
57315700.000 |22:32:55.915 |SdlSig |CACInfoReq |wait |RSVPSession(3,100,100,79309) |ReservationMgr(3,100,103,1) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] CI= 0 aCI=60724230 bCI=60724231
57315701.000 |22:32:55.916 |SdlSig |CACInfoRes |wait |ReservationMgr(3,100,103,1) |RSVPSession(3,100,100,79309) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] CI= 60724230 aCI=60724230 bCI=60724231 pol=0 rsvpStatus=1 sessJoined=F staIdx_no_agent=0 NoBWReserved eoSent=F aAgent: confID =0 ci =0 capCt =0 reg= mtpType =2 agentCt =0 mmCapSet=0 agentAllo =0 RemoAgent=F DevCap=0 ipAddrMode=0 bAgent: confID =0 ci =0 capCt =0 reg= mtpType =2 agentCt =0 mmCapSet=0 agentAllo =0 RemoAgent=F DevCap=0 ipAddrMode=0 aPort: NumPort =0 bPort: NumPort =0 otherAgentPort: NumPort =0
57315702.000 |22:32:55.916 |SdlSig |CACInfoRes |waitCACInfoRes |MediaManager(3,100,133,117677) |ReservationMgr(3,100,103,1) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] CI= 0 aCI=60724230 bCI=60724231 pol=0 rsvpStatus=1 sessJoined=F staIdx_no_agent=0 AudioBWReserved eoSent=F aAgent: confID =0 ci =0 capCt =0 reg= mtpType =2 agentCt =0 mmCapSet=0 agentAllo =0 RemoAgent=F DevCap=0 ipAddrMode=0 bAgent: confID =0 ci =0 capCt =0 reg= mtpType =2 agentCt =0 mmCapSet=0 agentAllo =0 RemoAgent=F DevCap=0 ipAddrMode=0 aPort: NumPort =0 bPort: NumPort =0 otherAgentPort: NumPort =0
57315702.001 |22:32:55.916 |AppInfo |DET-MediaManager-(117677) - waitCACInfoRes_CACInfoRes- qosType=0 videoEsc=0 mNoVideoResvAttempted=1 VideoCall=0
57315702.002 |22:32:55.916 |AppInfo |DET-MediaManager-(117677)::waitCACInfoRes_CACInfoRes, rsvp(0,0), aE2ERegion(64) deviceAcaps(0) deviceBCaps(0),noVideoResv(1), mmAllowedCallType(0x00000000)
57315702.003 |22:32:55.916 |AppInfo |DET-MediaManager-(117677)::bothPartiesVideoCapable=0 MainVideoCap=0 SecondVideoCap=0
57315702.004 |22:32:55.916 |AppInfo |DET-MediaManager-(117677)::mapCapabilitiesToMMCallType, policy=0, hasRSVP=0, mainVideoCap=0,dataCap=0, allowedCallType=0x00000001, V region(e2e=384, 1)
57315702.005 |22:32:55.916 |AppInfo |DET-MediaManager-(117677)::buildMtpXcoderAllocList, savedConnectionCount=0, QosType=0
57315702.006 |22:32:55.916 |AppInfo |DET-RegionsServer::matchCapabilities-- savedOption=3, PREF_NONE, regionA=(null) regionB=(null) latentCaps(A=0, B=0) kbps=64, capACount=9, capBCount=1
57315702.007 |22:32:55.916 |AppInfo |DET-RegionsServer::handleMatchCapabilities()-- BEFORE MATCHING LOGIC applied(after filtering), sideARefCaps=1 refCapsSaveOpt=1 otherCapsSaveOpt=1 capsA[7]::capCount=7 (Cap,ptime)= (4,40) (2,40) (86,60) (15,60) (16,60) (11,60) (12,60) capsB[1]::capCount=1 (Cap,ptime)= (4,20)
57315702.008 |22:32:55.916 |AppInfo |DET-RegionsServer::handleMatchCapabilities()-- AFTER MATCHING LOGIC applied, capsA[1]::capCount=1 (Cap,ptime)= (4,40) capsB[1]::capCount=1 (Cap,ptime)= (4,20) numMatchedCaps=1
57315702.009 |22:32:55.916 |AppInfo |DET-MediaManager-(117677)::checkAudioPassThru, param(0,1), capCount(9,1), mtpPT=1, aPT=1
57315702.010 |22:32:55.916 |AppInfo |DET-MediaManager-(117677)::preCheckCapabilities, region1=SIN-REG, region2=SIN-REG, Pty1 capCount=9 (Cap,ptime)= (25,40) (4,40) (2,40) (86,60) (15,60) (16,60) (11,60) (12,60) (257,1), Pty2 capCount=1 (Cap,ptime)= (4,20)
57315702.011 |22:32:55.916 |AppInfo |DET-RegionsServer::matchCapabilities-- savedOption=0, PREF_NONE, regionA=(null) regionB=(null) latentCaps(A=0, B=0) kbps=64, capACount=9, capBCount=1
57315702.012 |22:32:55.916 |AppInfo |DET-RegionsServer::handleMatchCapabilities()-- BEFORE MATCHING LOGIC applied(after filtering), sideARefCaps=1 refCapsSaveOpt=0 otherCapsSaveOpt=0 capsA[7]::capCount=7 (Cap,ptime)= (4,40) (2,40) (86,60) (15,60) (16,60) (11,60) (12,60) capsB[1]::capCount=1 (Cap,ptime)= (4,20)
57315702.013 |22:32:55.916 |AppInfo |DET-RegionsServer::handleMatchCapabilities()-- AFTER MATCHING LOGIC applied, capsA[7]::capCount=7 (Cap,ptime)= (4,40) (2,40) (86,60) (15,60) (16,60) (11,60) (12,60) capsB[1]::capCount=1 (Cap,ptime)= (4,20) numMatchedCaps=1
57315702.014 |22:32:55.916 |AppInfo |DET-MediaManager-(117677)::prepareInitialConnectionList, Party1CapCount=9 Party2CapCount=1 XcoderRequired=0 xcodingSide=0 allowMTP=0
57315702.015 |22:32:55.916 |AppInfo |DET-MediaManager-(117677)::AllocateXcoderandMTPWithZeroSavedConnection
57315702.016 |22:32:55.916 |AppInfo |DET-MediaManager-(117677)::isMTPNeededForDTMF, both parties are non-SIP and we'll do OOB for DTMF
57315702.017 |22:32:55.916 |AppInfo |DET-MediaManager-(117677) - isIpv6CapableMTPNeeded(0) ipAddrMode(0 0) mtpside(0)
57315702.018 |22:32:55.916 |AppInfo |SIG-MediaManager-(117677)::handleAuConnectRequest, connCount=0
57315702.019 |22:32:55.916 |Created | | |MediaExchange(3,100,138,127080) |MediaManager(3,100,133,117677) | |NumOfCurrentInstances: 1
57315702.020 |22:32:55.916 |AppInfo |DET-MediaManager-(117677)::getAllow2833FortheCall, 2833 is not allowed for the call
57315703.000 |22:32:55.916 |SdlSig |AuConnectRequest |waitAuConnectRequest |MediaExchange(3,100,138,127080) |MediaManager(3,100,133,117677) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] Party1: MR=0 CI=60724230 audioCapCount=9 region=SIN-REG xferMode=4 mrid=0 audioId=0 MMCap=0x1 activeCap=0 cryptoCapCount=0 flushIns=0 dtmCall=0 dtmPrimaryCI=0 IFPid=(3,100,234,63534) dtMedia=F honorCodec=F EOType=0 MohType=0DTMF Caps(1,1,0,1,F) confID=0 connType=3 connStatus=0 mtpPre=F teleEve=0 IFCreated=T IFHandling=0 FS=0 mcNodeId=0LatentCaps=null Party2: MR=0 CI=60724231 audioCapCount=1 region=SIN-REG xferMode=7 mrid=0 audioId=0 MMCap=0x9 activeCap=0 cryptoCapCount=0 flushIns=0 dtmCall=0 dtmPrimaryCI=0 IFPid=(3,100,185,53370) dtMedia=F honorCodec=F EOType=0 MohType=0DTMF Caps(1,1,0,1,F) confID=0 connType=3 connStatus=0 mtpPre=F teleEve=0 IFCreated=T IFHandling=0 FS=0 mcNodeId=0LatentCaps=null reConnType=0 videoCall=F AllowedCallType=0x1 mtpChanged=F precLvl=5 resCap=0 party1.mMediaCoordinatorNodeId=0 party2.mMediaCoordinatorNodeId=0
57315703.001 |22:32:55.916 |AppInfo |DET-MediaExchange-(127080)::wait_AuConnectRequest, party1(CI=60724230, MXIFHandling=0, MediaReq=0,xferMode=4),party2(CI=60724231, MXIFHandling=0,xferMode=7), farEnd(XferMode=0,AC=0,T38=0,FS=0, mediaReq=0), PT(2,2),connType(3,3), farendIpAddrMode=0
57315703.002 |22:32:55.916 |AppInfo |DET-MediaExchange-(127080)::addPartyAandPartyB, party1:xferMode=4, party2:xferMode=7
57315703.003 |22:32:55.916 |AppInfo |DET-MediaExchange-(127080)::setEOOpaqueMediaInfoForInterface, peerEarlyOfferType(0), farEndEarlyOfferType(0), h323EarlyOfferInfo(0)
57315703.004 |22:32:55.916 |AppInfo |DET-MediaExchange-(127080)::setEOOpaqueMediaInfoForInterface, peerEarlyOfferType(0), farEndEarlyOfferType(0), h323EarlyOfferInfo(0)
57315703.005 |22:32:55.916 |AppInfo |DET-MediaExchange-(127080)::setRegionAndHonorIncomingCodecPrefForInterface, Party1: myRegion(SIN-REG), peerRegion(SIN-REG), farEndRegion(), myHonorIncomingCodecPref(0), peerHonorIncomingCodecPref(0), farEndHonorIncomingCodecPref(0) Party2: myRegion(SIN-REG), peerRegion(SIN-REG), farEndRegion(), myHonorIncomingCodecPref(0), peerHonorIncomingCodecPref(0), farEndHonorIncomingCodecPref(0)
57315703.006 |22:32:55.916 |AppInfo |DET-MediaExchange-(127080)::addPartyAandPartyB, videoCall(0), normalStart(0), audioRegion(64), videoRegion(384), party1VidCapable(0), party2VidCapable(0)
57315704.000 |22:32:55.916 |SdlSig |MXNewParentPid |restart |AgenaInterface(3,100,234,63534) |MediaExchange(3,100,138,127080) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:3,L:0,V:0,Z:0,D:0] parent pid:nodeId=3.PN=138.PI=127080.vPT=2 allow2833=F injectDigitstoMTP=F subscribetoMTP=F passthru2833=F
57315705.000 |22:32:55.916 |SdlSig |MXInterfaceRestart |restart |AgenaInterface(3,100,234,63534) |MediaExchange(3,100,138,127080) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:2,L:0,V:0,Z:0,D:0] pid=0.0.0 partySide=A mAudioRegionKbps=64 mVideoRegionKbps=384 mMulticastFlag=F silence=F network=0 sessionId=0 ipAddrType=0 ipv4=10.130.3.9 port=49839 My DTMF (config=1 support=1 2833recvPT=0) Peer DTMF (config=1 support=1 2833recvPT=0) Media DTMF (subscribe=F passthru2833=F injectDigitstoMTP=F allow2833=F) cryptocapcount=0 RSVP nPortsOpened=0 AllowedCallType=0x1 aPT=2 vPT=2 e2eAR0 e2eVR0 capE2E=F dscpRSVPFail=F mtpChanged=F allowOneWay=F my connType=3 peer connType=3 mouth mode=0 mouth party=0 ear mode=0 ear party=0 mIsSRTP=T farEndXferM=0 farEndMediaReq=0 joined=F NormalReconn=T callIpAddrMode(my=0 peer=0 far=0) moh=F mediaReq=0 mPrecLvl=5 allowVideo=F SIPDevMediaInfo: [ vidPref=T isPartyA=F stackIdx=1 SDPInBeginMedia=F isJoined=F videoP=T EO=0 renegMedi=F
57315705.001 |22:32:55.916 |AppInfo |DET-kirra-ipv6 AgenaInterfaceBase-(63534)::initializeMemberData mNegotiatedIPAddrType = 0
57315706.000 |22:32:55.916 |SdlSig |MXNewParentPid |waitReconnect |H245Interface(3,100,185,53370) |MediaExchange(3,100,138,127080) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:3,L:0,V:0,Z:0,D:0] parent pid:nodeId=3.PN=138.PI=127080.vPT=2 allow2833=F injectDigitstoMTP=F subscribetoMTP=F passthru2833=F
57315707.000 |22:32:55.916 |SdlSig |MXInterfaceRestart |waitReconnect |H245Interface(3,100,185,53370) |MediaExchange(3,100,138,127080) |3,100,13,119956.2^10.130.3.9^Port 49839 |[R:N-H:0,N:2,L:0,V:0,Z:0,D:0] pid=0.0.0 partySide=B mAudioRegionKbps=64 mVideoRegionKbps=384 mMulticastFlag=F silence=F network=7 sessionId=0 ipAddrType=0 ipv4=10.130.3.9 port=49839 My DTMF (config=1 support=1 2833recvPT=0) Peer DTMF (config=1 support=1 2833recvPT=0) Media DTMF (subscribe=F passthru2833=F injectDigitstoMTP=F allow2833=F) cryptocapcount=0 RSVP nPortsOpened=0 AllowedCallType=0x1 aPT=2 vPT=2 e2eAR0 e2eVR0 capE2E=F dscpRSVPFail=F mtpChanged=F allowOneWay=F my connType=3 peer connType=3 mouth mode=0 mouth party=0 ear mode=0 ear party=0 mIsSRTP=T farEndXferM=0 farEndMediaReq=0 joined=F NormalReconn=T callIpAddrMode(my=0 peer=0 far=0) moh=F mediaReq=0 mPrecLvl=5 allowVideo=F SIPDevMediaInfo: [ vidPref=T isPartyA=F stackIdx=1 SDPInBeginMedia=F isJoined=F videoP=T EO=0 renegMedi=F
57315707.001 |22:32:55.916 |AppInfo |DET-H245Interface-(53370)::mapRestartSignal, mDTMFProfile oobUserInputCapability=1

Could be a codec issue. Verify what codec you are trying to use when the call fails.
Is this H323 or MGCP, what is the PSTN connectivity, SIP or PRI or FX0?
Might be helpful to post the router config.

'ken burns' poor quality interlacing jagged

This post is to document issues with 'Ken Burns' rendering in Final Cut Express 4 and some workarounds and possible bugs in software I found.
Similar posts about this issue:
https://discussions.apple.com/message/5207261#5207261
When I import images into final cut express and apply keyfram effects with panning and zooming a.ka. the 'Ken Burns Effect' I find that image quality is very poor. This occurs in most BUT NOT ALL images in viewer and canvas windows as well as rendered footage. The video issues are severe interlacing artifacts (horizontal blurry lines) as well as motion jitter along edges.
Many other users on the web suggested the following, which did not work for me:
-Avoid using JPEG files because their compression introduces artifacts which causes problems for Final Cut
I have found both JPEG and TIFFs have trouble with Ken Burns, although I do have certain TIFFs that seem to work.
-Using different software to render ken burns panning.
This seems silly to me. I find that the integration of pan,zoom necessary for fine tuning during editing. This would be extremely time consuming to separately generate each pan/zoom clip and import. I have heard that some software has high-end smoothing, but I am satisfied with the images that do pan and zoom correctly in Final cut.
-Adjusting Field Dominance in the clip properties to none
this was already set on my clips
-Adjust render settings.
I saw a 1001 rendering 'recipes' offered up to fix image pan/zoom issues. None worked
Things I discovered
Ken burns effect looked great when the image was in a transition, but bad when it was not. For example: Imagine a 5 second cross dissolve between regular video and ken burns motion image. When image becomes clearly visible in the latter 2.5 seconds of the transition it looks excellent while panning/zooming. When the transition finishes there is a sudden change to poor quality in the pan/zoom.
-The render bar on top of the timeline is dark-green for good-looking images, which according to the final cut manual, means 'no render necessary'
-There was nothing special about these render-not-necessary images that I could find in resolution, settings, etc.
-Good looking images were jpegs, gifs, and tiffs
I tried converting other images and reimporting, no luck
-I can make the ken burns look good for all images by playing the movie in the canvas window and setting it 99% zoom.
Any zoom level other than 100% looks good.
-This seems like a bug to me.
Eventually I just used a screen recording application called screenflow to capture my video playing in canvas window at 99% in real time.
This worked.
Hopefully someone can explain why rendered images never look good and what format works to get the dark green line and avoid rendering all together and these problems.
I don't mind converting file formats beforehand as long as they work well

The render bar on top of the timeline is dark-green for good-looking images, which according to the final cut manual, means 'no render necessary'
This is misleading. It simply means rendering is not necessary for playback. It does NOT mean that the material does not need to be rendered.
100% zoom level is as close to how your video actually looks that a computer monitor can display.
You never said what format you're working in.
You always have to render still images. You're making video, and they're not video.

Refund not allowed for poor quality

I have learned that even though my Skype number does not work correctly and there is poor quality on the line, it can never be refunded, and apparently Skype don't guarantee that it will even work properly according to customer support.
After three hours, over a number of 'chats', and loads of conflicting info the best they can do is troubleshooting tips. I would love to sell people broken stuff and tell them that it don't guarantee it will work... lol
They really are ruthless and not very customer orientated at Skype. Polls have shown they are way behind others in terms of call quality etc. so I do advise you to take your money elsewhere. Skype know they have bad quality, so it's best not to promise something that works. Clever.... but for how long?

hi gundam,
why do u need to create a credit memo for 100% loss?
just need the material movement document that will update the stock accounts then add a billing block.
thank you and best regards.

Flash is a poor quality software

Guys, after just short time (luckily) that I had to work with flash, during which time flash show what its capable of (not a positive thing), my thoughts on it.
Flash is extremely poor quality software. Incidents working with flash involved
1. thumb doesn't show up on slider when I click button once, but shows up when I click this same button twice. (code: thumb.visible=true), that all there was to it!!!
2. movie clips moved out of scene are showing on scene anyway
3. Simply copying the aforementioned slider and placing it on first frame on main scene brakes totally unrelated code somewhere else. But pasting the same slider on second frame doesn't brake that code anymore! Needless to say that slider has no code whatsoever so it couldn't possibly reference anything in my scene anyway!
What else? Yesterday I was happily working till lunch. Saved my work, went, had a lunch, came back, try to open my file, nope, not so fast flash tells me that this is incorrect format of a file!!! I couldn't believe what I'm seeing. I've never during my 15 years of working as a programmer came across software which couldn't open file saved by itself. Apparently, this is very common problem with flash: Re: I cannot open FLA files in CS5 "UNEXPECTED FILE FORMAT" help!
Luckily I've had save this file the day before so I've lost only half a day's work.
Another phenomena, during debugging flash goes through lines of code and at last line throws error that child mustn't be null, which is really bizarre because on previous lines I've had that child object and flash didn't complain at all:
child = new Item();//goes through this line
child.setUp("myChild");//goes through this line
addChild(child);//throws ERROR that child mustn't be null.
Another incident, two buttons identical class, all is different is text on them, one says play, the other one says settings. First button do not respond to mouse events, specifically to mouse_over event, second button behaves correctly. Situation got resolved that I've added another, dummy button and moved it out of stage. Now both original buttons behave correctly!!! How is this possible???
Another incident from before yestarday. Same slider. First frame, two copies of it. First one (top one) after publishing looks as it looks in editor, second looks completely different! parts are scaled up, far away from each other, total mess!!!WHY??? I simply put one slider from library and copied it once. Same frame, same slider, no code involved whatsoever and despite this flash messes things up.
Another incident with slider. The same slider copied from one frame to other. One works perfectly on one frame (that is you can drag the thumb and the thumb follows your mouse), paste EXACT!!! copy of this slider on different frame and the slider becomes unresponsive!!! Un effing bellievable!!!!
Oh, and one more thing, can this software and swfs produced by it be any slower and use more processor power?
There were also plenty of others smaller annoyances how flash behaves, or why doesn't behave correctly. I'm so glad that will not have to work with this software anymore. It is so bad. And it is Flash CC. Unbelievable.
So I suppose, my question is, why is flash so poor quality software, despite the fact that is on the market for so many years?

Are you serious?
Are you genuinely serious?
Are you really...
How can anyone think that this, out of box should compile? How?!?
The child isn't declared, Item class isn't defined, how can you think that this could/should compile? How?!!!
As I've said in one of my previous posts, this is simply snippet of my code with those problematic lines. And why I have problem with this is, again, as I've said previously flash does go through two lines with child variable, but throws error (during debugging) at the third line that child variable mustn't be null!!! while just before second didn't have any problems with referencing this variable, just one line previously.
And no Amy, you are wrong saying that I've nulled this variable somewhere.
If you look at the code (from one of my other posts):
//[begin of example]
//some function's body
child = new Head_mc(); //Head_mc is a movie clip
trace("child: " + child);//outputs some name of this child
child.setUp(aHead);//goes through this line fine while debugging
addChild(child);//GIVES ME ERROR TELLING ME THAT THAT child MUSTN'T BE SET TO NULL!!!!!!
if I change this code to:
//some function's body
var c:MovieClip = new Head_mc(); //Head_mc is a movie clip
c.setUp(aHead);//goes through this line fine while debugging
child = c;
addChild(child);//No problems, but why is it that this works and the first code doesn't work?
//[end of example]
you will see that the only function which could possibly nullify child variable is function setUp, yet this function is called in second example as well as in first and yet first example behaves incorrectly and second example works as expected. Why? What's different there?
Oh, and @sinious, please mate, give me a favor and don't try to compile it, because it is impossible to compile. But also please note that I mention that the debugger goes through some lines so it must mean that at some point I did compile it first and then started debugging. It does make sense, doesn't it?
As for working with complicated software/languages?
Guys, please don't make me laugh.
Maya, Catia, AutoCAD, 3DMax, Visual Studio, Blender, Photoshop, ZBrush, UDK, UE4, - (except Catia I work on weekly basis, every week of the year (except holidays and weekends that is) with each and everyone of those products), and of course as a language of choice I use C++. How do you think C++ compares with regarding difficulty, complexity, learning curve to as3 do you think?
Flash (and as3) is a relatively simple but buggy, poor quality and unreliable software. I can say that not because I cannot learn it. I can say that because I've worked with it and experienced it's poor quality and "bugyness" from day one. I also worked with other software in my life, I also do work every day of my life with other software (the above mentioned), and flash simply proves to be of poor quality.
None of the software I've mentioned couldn't open file it just wrote couple of minutes ago. With flash it happened. Not once now, but two times. And not just to me. Plenty of examples on the web. Guys, please, open your eyes. It didn't happen because I'm a bad/incompetent programmer. It happened because flash is a buggy, poor quality and unreliable software. And companies are ditching flash not because I say it is bad. They ditching it because through their own experience they realized that flash is a buggy, poor quality, poorly performing, unreliable software. That's all there is to it.
And as for self-congratulatory behavior of yours:
"Plenty of evidence is here to the contrary so, mission complete"
What mission did you achieve?
The one in which you proved to everyone that you don't understand that you cannot compile code snippet which is taken out of context?
What kind of programmer you are, it just makes me wonder...

My new 4GS is taking really poor quality photos, how can I improve them?

I'm trying out the camera on my new 4S and am shocked at the poor quality. I've taken the same photo in the same light etc with my 3GS and the image is much better, I can see more detail and the texture is smoother. My 4S images look terrible!
Has anyone else noticed this? Is there a way to alter the settings? Thanks in advance.

Hi there, i am an iphoneographer from OZ, and i am having the same issue, i have switched from iphone 4 which was upgraded to IOS5 to the 4s with the IOS 5. Since owning the 4s i have had nothing but noisey pictures in low lighting conditions, including cloudy days night time occasions indoors ect, even when using flash.
I have used different apps, including the standard apple cam, king camera, Pro cam, Focus Plus, and the quality is all the same with the noise, but yet when i take the same pictures with the iphone 4 (which my other half has now) in the same lighting they are fantastic quality. I'm not clear here what the issue is as being an iphoneographer/Photgrapher i though i knew a fair bit about the iphone but this has really stumped me and left me no choice to send out a call for help and ask if other people out there are in the same boat, and have any advice on what possibilities could help fix this, as i miss the quailty on my iphone and dont want to have to swap back to it. Cheers LJ

Internal mic poor quality when recording in iMovie

I noticed exceptionally poor quality of internal mic when recording acoustic guitar piece on iMovie, with the built in iSight camera. Technically, the sound is called "Phasing" - it sounds like a slow 'whoosh' over all of the audio.
After investigation, I have found the cause to be the Ambient Noise Reduction algorithm added by Apple.
To remove this - go to:
System Preferences
Sound
Input
*uncheck* 'use ambient noise reduction'
Problem solved....
Now my question - does anyone know how to use the iSight (built in) and simultaneously and synchronously record audio using an External Mic - eg the Blue "Snowball" - which is a USB mic.
In theory, the mic should plug in and then show up as an external device, but when I select iSight camera as my video source - the Powerbook automatically assumes that I want to use the internal mic as my audio source.
Have tried to go to Sys Prefs and change 'Input' to USB - but no option to do so
All help appreciated
SK

Hi thanks for the response
unfortunately, it's got nothing to do with MIDI (which is just a series of controller information)
The Blue 'Snowball' External mic is essentially a 'USB Device' and should be recognised as such by the Mac. The data will come in as 16bit, 44.1khz AES bit stream and then be assigned a destination.
The problem is that iMovie does NOT allow me to separate the iSight camera from recording with 'internal mic'
I want a way of finding how to seperate them - and then assign the USB mic to be associated with the iSight camera - giving me iMovie/iSight videos - with PROFESSIONAL sound
sorry if i didn't make this clear
thanks again
sk

Poor quality on incomming PSTN call

Similar Messages

Maybe you are looking for