Poor quality printing - white lines, etc

I have had a K5400 for over 2 years (out of warrenty). I don't use it a lot and have recently developed problems with white lines through characters when printing black and white and multi colored lines when printing in color. I aligned the printheads twice, cleaned the printheads twice and calibrated the linefeed twice. I changed the CY printhead (after less than 600 pages) because the diagnostic printout indicated the printhead was poor. I continue to have the same problems after changing the printhead, realigning the printheads, cleaning the printheads and calibrating the line feed again.
Is there any hope for this printer or do I need to get another one?

1. There is only one correct setting. Trying then all will just screw up the application. Trash your preferences first. I'm guessing you should be using DV PAL, can't tell about the aspect ratio or the audio sample rate. Pick one that's right for your media. Not much information in none of them works properly. What are you doing? What's happening?
2. Where are you looking at the exported image? On a video monitor? The QT player? Did you set the playback in QT to high quality in movie properties?
3. FCE does not work correctly with .dv. That's DV Stream, a format used almost exclusively by iMovie. FCE uses QuickTime. Yes, DV is a heavily compressed format. See above.
4. After you print to video where are you looking at your material? What are you seeing? You should have horizontal lines, but not on a television set, if you're working in the correct format.

Similar Messages

Poor quality printing

About a year ago I remember seeing frequent complaints about the poor quality printing in photo books.
Is anyone else still having problems? I just recieved 2 books and I am just unimpressed (and quite disappointed) with the print quality.
One is a duplicate of a book I had printed through My Publisher last year and there is a night and day difference. The My Publisher book looks far superior.
I was having difficulty with My Publisher so I decided to give Apple's service a try.
I'm shooting with an 8mp dSLR camera (Canon) so I should have no issue with 8x10 prints. My scanned images were all at 300dpi.
Many of the photos in the book I've had printed locally and there is a big quality difference.
Is anyone seeing this problem or did I just get unlucky?
THANKS!

Welcome to the Apple Discussions. The Apple book cannot compete with your printing of the photos or pages on your own inkjet printer or thru a photofinisher. It uses a different type of printer. The current books (all sizes) are printed at 300 dpi. Here's what Apple send me regarding the books printing and material quality:
I contacted Apple and asked for information that I could pass on. Here's the reply I received from Apple:
"Thank you for contacting the Apple Print Products Customer Service.
I understand that you would like to know the printing process that is used and the color mode the files should be in, so you can better advise users in the iPhoto forum.
iPhoto version 4 or later, allows you to import and print files through the Apple Print Product service as RGB, grayscale, or CMYK color space. JPEG files with RGB color space are recommended for best results.
While iPhoto 2 can import files of various formats, including RGB color, grayscale, and CMYK, this version requires JPEG files with RGB color space when printing photos and books.
For more information regarding iPhoto 2, please visit the following article:
iPhoto: Color, Black and White Prints Appear Garbled or Distorted
For more information regarding iPhoto 5, please visit the following article:
http://docs.info.apple.com/article.html?artnum=165501
Here are some of the technical specifications for the books, cards, and calendars. I hope this gives you an idea about their quality and form.
BOOKS
All iPhoto books are printed using acid-free paper for long-lasting image quality. The photos are printed at a high resolution (300DPI if you use iPhoto 6). There is no external modification--such as sharpening or contrast adjustment--of the photos; what you see in the application is what is printed in the book.
Hardcovers Books
The cover is hard-bound and covered in linen. You select the linen color during the book-ordering process. The hardcover books have a solid, stiff binding that is glued and crimped. The internal pages, measuring 8.5 x 11 inches, are printed on McCoy 100# Text Gloss paper stock.
Softcover Books
The softcover books come in three sizes:
- Large 8.5 x 11 inches
- Medium 6 x 8 inches
- Small 2.6 x 3.5 inches
All of the softcover books have internal pages that are printed on McCoy 100# Text Gloss paper stock. The large softcover book has a white cover (Kromekoteplus Folding Cover, 16 point) with a cutout on the front that reveals the cover-page photo in the book. The covers for the medium and small softcover books have the cover image and title printed directly on the cover. All of the softcover books have a glued binding and feature a thick cover of McCoy 100# Cover Gloss paper stock.
CARDS
All cards are printed on McCoy 120# Silk Cover paper stock. The postcards measure 4 x 6 inches, and the greeting cards measure 5 x 7inches.
CALENDARS
All calendars measure 8 x 10 inches and are printed on McCoy 100# Silk Cover paper stock.
To ensure the best print quality, we have chosen to use Kodak NexPress technology. The press uses a dry toner, which is fused to the surface of the paper. Please see NexPress' site for more information:
KODAK NEXPRESS 2500 Digital Production Color Press
I hope you find this information helpful in answering questions on the iPhoto forum."
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
MBP 2.16Ghz; G5 Dual Core 2GHz, 2G RAM ea, 250G HD; G4 Dual 1Ghz, 1.5G RAM; Mac OS X (10.4.10) 22" LCD, 710G FW HDs, Canon: SD700IS/i850/LIDE 50, Epson R200, 30G iPod, 2G Nano

Poor quality printing from reader

I am getting poor quality printing from adobe reader.
I tried 3 different PC with the same printer (windows 7 - Epson xp 600)
DOC XLS JPG and all other files are excellent on the printer.
I tried almost all the configurations on the properties of the printer and adobe
I don't know what else to do to get my printing correctly.
Please HELP MEEEEEEEE
Thanks a lot for your time.

What is your Reader version?
What exactly means "poor quality"?
Have you tried Print as Image?

L5780: first page or 2 print fine then poor quality print

The first few pages of print will be fine but then towards the end of the 3rd page there are horizontal streaks, the next page will be full of them getting worse as the page progresses. I can wait a while (1/2 hour or so) get a good page but then back to the horizontal streaks.
I replaced my print heads in August last year and had some issues with the black and yellow one which HP replaced (both of them went from green status to yellow status fairly quickly). The new print head solved the issue for a while but now for months I've been dealing with this problem.
I have cleaned, aligned and calibrated and now after a 2nd cleaning the yellow print is a very poor quality. I have HP, print heads, HP ink and HP paper. I have the proper paper settings. From what I have read it appears that it could be the black and yellow print head again, but that just seems odd that a 3rd one would go bad in this short time (the first ones I replace in August did not indicate they were bad and were still in a yellow status) . I don't do a great deal of printing and this August was the first time I've replaced the print heads since I got the printer about 4 years ago.
I print most of my items from Micro Soft Word or Micro Soft Digital Image Suite 2006 Editor.

See my answers below:
a) The size of the pages of PDF which you are printing. LETTER
b) Does all pages of the PDF are of same size? YES
c) What is the page size set in the Printer and what is the actual size of the paper which you have put in the tray? LETTER
d) Does this problem also happens on the virtual printer which you might have on your system (Try either Microsoft MPS Document writer or Adobe PDF Printer) No VIRTUAL PRINTERS
Thank you for attempting to help me with this... we have tried everything and haven't been able to resolve the problem.
Sherri

Photsmart 7520 poor quality prints

A month ago I bought a Photosmart 7520 printer. I have consistent problems with print quality. I have to take the black cartridge out every couple of days and shake it. Photo prints are streaky and often in a weird selection of colours. It almost always prints a 'draft' quality print first time, wasting expensive paper. I have tried all the print head cleaning and alignment routines, at best they have a very short term effect. Is there something I can do, or should I just reject the printer as not fit for purpose?

Hi,
The Print Quality issues shows up either if correct papers and print settings are not selected. We need to make sure we are using correct type and good quality papers and also Paper Type and Size same in the Print Drivers.
You may follow the steps in the link below:-
If there is any replacement of a part or the printer is required, it depends on the Warranty status of the printer.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03369392&tmp_task=solveCategory&cc=us&dlc=en&la...
though I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution

Poor quality prints

I have photoshop CS3 and an Epson Stylus photo R2400 printer. I have used this combination for years. I let photoshop manage my colors and not my printer. I was trained to look at the print preview and if the image quality looked poor in the preview and the colors were oversaturated it was a good sign that the printed photos would be good. This has proven to be true. For some reason, without any of the settings being changed, the previews now look pretty good and the printed photos look poor. The printed photos are blurry and oversaturated. Any thoughts on what the cause might be?

kissaki wrote:
Hi
I ned help. Color Laserjet 2605 dn. When I print a test sheet colors look normal but every time I print a file from any DTP prog. the colors are very washed out.
I seem to have no software control of how the printer prints, so how can I get good solid colors to print accurately.
I set up using correct ink and paper etc.
Hope you can help
Thanks
What operating system? What print settings are you using? If you are printing in draft mode the colors will be light.
Regards,
Bob Headrick, Microsoft MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Poor quality printing with quick books remote

I just started using the HP 8610 and now the print quality is poor when remote printing from quick books. It was perfectly fine wiht my OLD OLD HP 1200. checked with remote printing company and they have not helped. Any clues?

I have the same problem when using Logmein with my new 8610. Printing text heavy statements from remote computers that look fine on the screen, come out with fuzzy pics and pixelated words. This was also never a problem with our old 7510.

Consistant Poor Quality Prints

I'm afraid this is the same old complaint. Having had printed an album of Digital photos I was very disappointed with the quality. Apple kindly re-printed the album but the result was the same. Saving the album as a pdf and printing on an elderly colour printer at work resulted in vastly superior results. Is it me or is there a problem with Apple's proprietary print service provider?

It's not you. What size books are you having problems with?
It appears that the books are not printed with a continuous process like our home inkjet printers. When I examine the photos up close and under strong illumination I can see a faint halftone pattern. This pattern, in my experience is most noticeable in the medium sized books and the smaller prints in the large books. For the most part, I have had excellent result with the hard cover books that I've ordered. The last one was with the dpi bumped up to 300 in the iPhoto's preference file. I had to get the prints in very strong light, like direct sunlight and examine up close before getting a hint of the halftone pattern. It was slightly more noticeable in the smaller sized photos in the book. When view at normal viewing length and illumination it was, IMO, perfect.
The medium book was not as smooth. From normal viewing distance it was slightly noticeable but for the intended purpose perfectly acceptable.
So, bottom line, the print process does look to be different from that of our home printers. Designed for mass production, it probably will never reach the quality we can with our own.
OT

Giving Apple Feedback on poor quality printing of iPhoto Books

Hi,
I just filled out the feedback form to let Apple know I am not happy with quality of new printing on iPhoto Books. As I know I am not alone, and many people on this board have posted their frustration and disappointment, please post and give Apple feedback so we can hopefully get better books.
http://www.apple.com/feedback/iphoto.html
Thanks!

Hi,
I just filled out the feedback form to let Apple know I am not happy with quality of new printing on iPhoto Books. As I know I am not alone, and many people on this board have posted their frustration and disappointment, please post and give Apple feedback so we can hopefully get better books.
http://www.apple.com/feedback/iphoto.html
Thanks!

Poor quality prints from HP 1320n x64 Windows 7

Hi
I am running CS4 on Windows 7 64bit and I've noticed that b/w prints from my HP Laserjet 1320n is very poor. I typically print screen shots or print single page PDFs to the 1320n. The output is low res and looks like newspaper print magnified several times (halftone printing?)! The prints are still low res even when I change the doc to 300 pixels/inch. However when I print the same docs to my Canon IP4500 inkjet the prints come out perfect. I am not sure if its a problem with CS4 or a HP driver problem. The HP prints without problems from other packages such as MS Word.
Any help appreciated.
Thanks in advance.

Hi
It looks like a driver problem in Windows 7. I removed the HP PCL6 driver and replaced it with the built-in (but older) PCL5 driver in Windows 7 and it seems to have resolved the issue. I compared the two drivers and it seems that PCL6 does not have the 'Printer Features | Graphics Mode | Send Graphics As Vector' mode. This seems to be the crucial setting that allows high res bitmaped graphics and PDF's to be printed properly.
Thanks.

Our printer is an hp l7780 and it has started printing white lines pretty evenly spaced.

We have gone through the recommended steps to self correct and nothing seems to work. Is there anything that can be done to eliminate the lines from printing and copying.

Hi,
Please follow the steps below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01957673&cc=us&dlc=en&lc=en&product=2512010&tmp...
I believe the Printhead might cause such a behaviour,
Make sure to check the printheads health and warranty status, as should be listed within the Self Test Report:
Load U.S. Letter, A4, or legal size paper into the input tray.
Press the Setup button.
Press 1 to select Print Report , and then press 1 to select Self-Test Report .
Press OK . The self-test page prints.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Officejet Pro k8600 poor quality printing on "prenium plus photo paper"

Using paper "premium plus photo paper" Q5496A (a3 size) and C6832 (A4 size) the quality of photo printing is excellent.
This last time I bought paper "premium plus photo paper" CR675A (A3 size) 5 stars type and quality of the prints is very bad. The full range of blacks and grays disappears and turns into a single shade of very dark gray. Paper like "advenced photo paper" Q8697A (A3 size) 4 stars has same problem.
A3 paper Q5496A is difficult to find, may be it is no longer in production? What kind of A3 paper can I use instead of Q5496A?

The problem is that - with the same hardware, same software and same image file - when printing on Q5496A, the print quality is great while printing on CR675A, the print quality is really bad.
I have already done all tests and solutions suggestes at your link , and nothing changed.
Cartridges, heads and paper are all original HP and the paper is Premium Plus 5 stars.
So the issue really seems to be the paper to me or the ink that doesn't work well with this kind of paper...
Thanks a lot.

Raw image manipulation results in poor quality print.

Hello,
Been a PS user for a number of years, but very new to the mac platform. Regardless, I shot some beach photos in RAW format of my 6 year old. Brought them into PS and made adjustments to what I thought was a nice image. Uploaded the image to my local walmart photo center just to test out my work. The image is DARK and ugly. She looks almost dirty.
Im curious as to know what I did to screw this up? I would appreciate someone looking at it for me and let me know what it looks like to you.
The image can be seen here:
http://i464.photobucket.com/albums/rr8/chaznsc/print_DSC08047.jpg
chaz

The image looks fine to me, but then I'm using a color-managed web browser (Firefox 3.6.8).
Image file CONVERTED to sRGB
Because it is in the Adobe RGB color space (fortunately you embedded the color profile in the image file) the image will look like cr@p in any non-color managed browser.
My guess is the idiots at WalMart assigned an sRGB profile to it instead of CONVERTING it to sRGB. Most run-of-the-mill processing labs expect to receive only sRGB files.
If that's what they in fact did, your image would look something like this when printed:
Image after assigning sRGB profile
Next time, CONVERT your files to sRGB before sending them to clueless, albeit hard-working, minimum-wage store employees.
Wo Tai Lao Le
我太老了

Poor quality photo printing

I am getting very poor quality prints from my new Canon MG6220. I have it set on the advanced photo with glossy paper. Am I missing something?

Are you using Canon brand paper? Unless you have the proper profile for other papers you'll get less than ideal prints. The printer (when working correctly) will spray the correct amount of ink onto the paper, but it's matched to Canon paper. IF you use any other brand it may absorb more ink or less than the printer is set to spray. That has a major effect on the look of the photo.
Also note that most people edit using their monitor set at full brightness, but when they print it's not the same. It's very important to set your monitor's brightness to match what your printer produces.
"A skill is developed through constant practice with a passion to improve, not bought."

Refund not allowed for poor quality

I have learned that even though my Skype number does not work correctly and there is poor quality on the line, it can never be refunded, and apparently Skype don't guarantee that it will even work properly according to customer support.
After three hours, over a number of 'chats', and loads of conflicting info the best they can do is troubleshooting tips. I would love to sell people broken stuff and tell them that it don't guarantee it will work... lol
They really are ruthless and not very customer orientated at Skype. Polls have shown they are way behind others in terms of call quality etc. so I do advise you to take your money elsewhere. Skype know they have bad quality, so it's best not to promise something that works. Clever.... but for how long?

hi gundam,
why do u need to create a credit memo for 100% loss?
just need the material movement document that will update the stock accounts then add a billing block.
thank you and best regards.

Poor quality printing - white lines, etc

Similar Messages

Maybe you are looking for