Poor Quality Text in Titles

Hello, my name is Scott and I’m a newbie.
I made a cute little movie using FCE and exported it as a QuickTime movie. When I play it in QuickTime, the text for my titles is of very poor quality, like it was sent through a fax machine. When I play it on iTunes, the text looks great. When I copy the iTunes version on to iDVD and test it out it’s back to the poor quality again.
Does anyone know what might be going on. I understand there is a difference in pixilation between my Macbook Pro and a TV, but why would the text look so good viewing it on it using iTunes?
Scott

Yep, it's set to high quality viewing....I just figured it out. QuickTime was set to "fit to screen" and not "actual size."
I learn something everyday.
Thanks,
Scott

Similar Messages

Poor quality text in PDF

I am using Acrobat pro X to produce an online brochure. I started producing the brochure in Corel draw using A4 paper size in landscape mode. When I created the PDF by the print command the general quality was very poor, both graphics and text. I experimented with various settings increasing the quality settings for images but it didn't seem to have any significant effect. I then tried placing some of the elements in a Word document and creating a PDF from this document, and again I found that the results were unsatisfactory, a bit better than from Corel but not very good. I have converted many Word documents to PDF in the past without problems. I started a new Word document and this time copied a template for a landscape brochure from Microsoft. This was already populated with some Text-and-Graphics. When I created a PDF from this it was quite good. It was not clear to me what the difference between my basic word document and this new one was. I went through the documents’ settings with a fine tooth comb and the only one I could find was different was the paper size and orientation. I then copied some of my graphics and text to the word brochure document, and this to converted nicely to PDF. I took a note of what appeared to be a somewhat unusual paper size and copied this to the Corel document. When I created a PDF it was now significantly better all the paper size was wrong. I went back from scratch with both the word document and the Corel draw document (those which produce bad PDF files) and carefully made sure that the paper size and orientation in the document matched the PDF settings. But the result was still poor in this case. It is not clear to me what is causing the problem although it does seem to be mainly text, the graphics are often okay. The text however is extremely patchy looking and very poor quality.
In the Acrobat settings I started with "high quality print" default setting and edited this. When I selected the fonts section there were no fonts selected for embedding. This surprised me as I would have thought high-quality print would automatically embedded all fonts. I selected the fonts in my document and embedded them and saved the settings, but when I went out of this dialogue box and straight back in it showed up with no embedded fonts. What's happening here? Is it for getting about my font selection? Or does this dialogue box when you re-enter it not reflect the current settings? Furthermore when I completed my modifications to the "high-quality print" default settings it asked me to save them as a new job options file which I did, but when I go to print a second time it never gives me the option of selecting these saved settings.
I have tried almost every permutation and combination of settings page sizes et cetera and I now tearing my hair out trying to figure out how to simply get a reasonable quality PDF file. Any assistance on these matters would be greatly appreciated.

Hi Michael
I am using Corel V 13 and Windows 7. The issue is not confined to Corel as I am also getting poor results often with Word as described. I also need to know about the font embedding as described above. Is it the case that if the fonts are embedded this
guarantees they fonts display sharply in the PDF? i.e. do the scatty fonts in the PDF prove I am not getting embedded fonts?
Corel does have a printer driver compatibility setting where you can set the target printer, but the PDF virtual printer is not available in the list.
Thanks
Murray

"Full Quality" = Poor quality text?

I am making a DVD, and am using video that is exported from iMovie HD. When I chose "full-quality" for the export, and view it when it is done, the quality (compared to how it looks in iMovie) is crap. It is especially noticeable in the "title slides" where there is just white text over a black background.
In my opinion, it definitely doesn't look like "full quality". What am I to do?

What I don't get, is that when I try to do the "share
to iDVD" feature, it opens a completely new project.
I already had one started, but it won't let me share
into that one. What do I do?
To add an iMovie project to an existing iDVD project, drag the iMovie project into the iDVD window. That is how we routinely include multiple iMovie projects on a single DVD.
As Lennart said, there's no good reason to export the iMovie project to a Full Quality movie you send to iDVD. In fact, it can cause problems. Your DVD won't contain the chapters you created in iMovie, for example.
When you Share an iMovie project to iDVD, or drag the iMovie project into the iDVD window, iDVD grabs a special movie iMovie stores for it inside the iMovie project package. The movie is in the package's Shared Movies > iDVD folder. To look inside the package, Control-click on the iMovie project and choose "Show Package Contents" from the popUp menu. (No need to go there unless you're interested. Don't change anything.)
The Full Quality movie you created is confusing you, for it's a confusing thing. iMovie calls it that not because it plays the movie with great clarity, but because it retains all the quality of the iMovie project. Exporting to a Full Quality movie hands us a movie we can import to another project with no loss of quality. Each type of iMovie project has its own type of Full Quality movie, following the movie format of the exporting project. There's never any loss of quality.
Changing the playback features of a DV movie in QuickTime Player has no effect on the quality of the movie itself or on the quality of a DVD you burn of the movie. It only affects playback quality in QuickTime Player itself.
QuickTime has been around a long time. On yesterday's slow computers, we would lower the playback quality on (huge) DV movies so we could play them more smoothly.
Note that if you have QuickTime Pro, you can set your QT Player preferences to play DV movies with high quality by default.
Karl

Poor quality text on path after updating to CS6

I have an Illustrator document I created some time back, probably in CS4 (but could have been CS2). It shows a road map and has lots of road names that follow the path of the associated road. When I open this doc in Illustrator CS6 I am told that the legacy text must be updated before it can be edited.
If I open the file without updating the text then everything looks fine but if I choose to accept the offer to update all the text then my road names appear with irregular character spacing that looks very ugly.
Can anyone please explain how I can update the text to CS6 without messing up the appearance?
David

None of the paths in this case appear particularly challenging. The text is simply following relatively gentle curves in the road, so it is disappointing that CS6 does a poorer job than previous versions of Illustrator.
The problem affects one particular road name on my map more than any other. My original document had a tracking value of zero for all characters in this name and looks perfect. I can only get close to this in the updated CS6 document by applying very high tracking values (well over 200) to selected characters.
Thanks for taking the time to respond. If you as an MVP are struggling to find any relevant documentation then I don't feel so bad about failing to find it myself!
David

Poor Quality Text In Doom 3

Hi i have resenty got this probelm with doom 3 the text seem really blurry i have not chnaged any setting
here is a screenshot to illistrate what i said
Many Thanx Lee

firstly whats your graffics card and what drivers are you using
now to to the good stuff
the game starts with the refresh at 60 herts (crap) if using nvidia drivers go to settings and on refresh settings overide tab and change the settings for the 1024 * 768 to read the refresh rate that you know you graffics card can hanlde
ive set mine to 75 herts and the game is smoother faster and not gerky

Poor quality, jaggy bitmapped titles - how to acheive good quality results

Using imovie HD and idvd you can achieve half decent results by upping the quality of your exported project.
On completion of your imovie project...
1) select share (to quicktime) (top menu...forgive me if I get the names wrong..typing from memory)
2) change to full quality (quicktime)... save file to location of your choice
You can also choose expert settings and select DV etc.
...this creates a higher quality mp4 file (as opposed to exporting to idvd)
4) on completion of the render, you can drag this file onto your idvd project
If you require even better results, try Final cut studio

Thanks for the response Kevin,
I fully updated as of last week - Premiere 8.1.0, Media Encoder 8.1.0.122 and ran the export again with a brand new Premiere project, dragged into a sequence, export media, selected Quicktime / ProRes 422HQ codec, matched the frame size, pressed queue to open Media Encoder and the started the export.
Exactly the same results I'm afraid - blocky, pixelated areas on gradients or areas of similar color.
Frustratingly, the free and 6 year old Mpeg Streamclip (v1.9.2) does a much better job, on a par with Final Cut. I don't suppose there's any way to automatically route the export via it?! Where Media Encoder uses 3 or 4 color shades with blocky finite edges, Streamclip and FCP seem to use 6 or 7 shades and the transitions between areas far smoother with visible dithering (you can see this in my original screenshots).
I would say that it seems to do with the source camera and how it's been originally encoded - I've done some further tests with Canon C300 rushes and they seem to convert / export well without problems and yet some blue skies in footage shot on a Sony F55 show some obvious banding (after conversion to ProRes 422HQ) that doesn't appear on the source.
I'm happy to provide the raw H264 mov to see if you are able to get any better results.
Chris

Poor quality text in DVD Studio Pro

Hi there,
I'm using DVD Studio Pro. I create menus in Photoshop and export flattened .psd files.
I work in PAL. This problem is worse in 16x9 (anamorphic).
I create the menus at the true original res of 1024x576. When the menus are imported into DVD Studio Pro the text becomes jagged and pixelated. I understand that non-square pixels are causing this, but I don't know of a solution.
What is the best way to bring menus and text into DVD Studio Pro?
I have searched a lot and noone has a great solution.
Thanks heaps,
Mike

You may find that Photoshop does a better job of resampling down to your SD PAL resolution. When DVDSP resamples down from your 1024x576 file, you are at the mercy of the hardware or software rendering in DVDSP, depending on your DVDSP prefs. Ideally, I'd work in Photoshop at 720x576, and use the pixel aspect ratio correction to correct the preview aspect ratio in Photoshop.

Text poor quality after Export

I'm having some pretty poor quality text rendering after export. The video appears fine otherewise. I am exporting to YouTubeSD not HD, though I wouldn't think that would matter. [?]
I'm pretty new to the complexities of film editing. So, I can't answer much about the video source files other than that they are MP4 converted originally from analog files written to DVD. I wouldn't think that would have anything to do with the titles at all since all text created thru PP Title Editor. [?]
Here's a screenshot of settings. Any ideas?

Sorry- I meant to add this is CS5.5
Jeff- I've been using this same font for other projects without problem. This just started happening on this project. Yes, it is a serif font but no problems before. It's always rendered well [Adobe Arabic].
Message was edited by: zech3 APOLOGIES- when I searched this issue, I didn't see my exact problem and the post below [ http://forums.adobe.com/thread/705407?tstart=0 ] just got resurrected from 2010, it didn't appear in my search... though I'm not sure our issue is identical...
Here's a better screenshoht:
And some screen shots of titles:
BEFORE text rendering problem. From a project last year, this typeface is skinnier but rendered much better!
AFTER text rendering problem started. This is the current typeface that, even though a heavier typeface, renders horribly!!
I should add that the titles seem to flicker a bit when transitions are applied to the start or end of title clip.

Poor Quality Stills

Forgive this old favourite. I've gone through lots of past threads and still would like some help please.
I am making a 04'00" film in FCP from jpeg stills alone. Some are in boxes, other have motion effects, all have lots of layers of text / text boxes on them. In short it's a real fiddle and render nightmare compared to good old DV!
Anyway, a couple of questions. My final delivery format is DVD to play on a flatscreen LCD or Plasma screen, so should I be proofing the quality of the image on my cathoid ray tube monitor or on the LCD monitor of my iMac? Does the final TV platform make a difference to workflow?
So far, following back thread advice, I have changed the Field Dominance button to None and dropped the Whites level to 90% which made the image on the LCD timeline fantastic (it had been aliasing massively before) but it still aliases on my CRT.
Also, when I export the rendered film as a Current Settings QT and then encode via Compressor and put it into DVD Studio Pro, the picture quality again looks fantastic on DVD Studio Pro Simulate but once encoded onto the final DVD, the shots with movement added are very poor, with lots of aliasing.
Forgive the long intro, but has anyone got a workflow I could try to reliably turn moving jpegs (big ones c12Megapixels) of houses (ie lots of straight lines which tend to flicker when moving) into a DVD to be played on LCD or Plasma in which the straight lines look straight and there is no aliasing or flicker on the pan /scans?
Thank you in advance.
Hamish
iMac 2Ghz intelduo FCP 5.5 Mac OS X (10.4.8)

Over sizing your images beyond what you will use does nothing good and creates issues with how FCP dithers/downscales them.
As a format - get rid of JPEGs. It is a lossy format created to transmit crappy images over the internet on web pages. Use TIFF or PSD which are lossless formats.
The flickering is an artifact of the interlaced nature of video. It is a result of very thin (often horizontal) elements that exist on one scanline as is common in text or titling. This can also be the case in scanned images with a great deal of detail in high contrast. (Note: It does no good to import images hugely larger than the pixel dimensions of the video sequence. All it does is force FCP to work harder at interpolation.)
As the alternate fields play, the flashing element is essentially being turned on/off. The basic strategy is to get the element to exist over two scanlines so it is refreshed every time the field plays or to reduce the amount of contrast so the difference between ON and OFF is not noticeable.
Things to try (In increasing order of image degradation)
- (in FCP) field order>none
- (in FCP or Photoshop) reduce whites by 10% - reduces overly bright areas
- (in FCP) flicker filter - minimum
- (in Photoshop) motion blur>vertical> .2 - .5 pixels - blurs vertically only
- (In FCP or Photoshop) Gaussian blur> .2 - .5 pixels -blurs both horizontally as well as vertically
- (in FCP or Photoshop) deinterlace - throws away half the image and is generally not appropriate on scanned images
Remember: Unless you are viewing your work in the appropriate external NTSC/PAL monitor, you are playing blind. The computer monitor only shows you a proxy image.
good luck.
x

Poor quality printing

About a year ago I remember seeing frequent complaints about the poor quality printing in photo books.
Is anyone else still having problems? I just recieved 2 books and I am just unimpressed (and quite disappointed) with the print quality.
One is a duplicate of a book I had printed through My Publisher last year and there is a night and day difference. The My Publisher book looks far superior.
I was having difficulty with My Publisher so I decided to give Apple's service a try.
I'm shooting with an 8mp dSLR camera (Canon) so I should have no issue with 8x10 prints. My scanned images were all at 300dpi.
Many of the photos in the book I've had printed locally and there is a big quality difference.
Is anyone seeing this problem or did I just get unlucky?
THANKS!

Welcome to the Apple Discussions. The Apple book cannot compete with your printing of the photos or pages on your own inkjet printer or thru a photofinisher. It uses a different type of printer. The current books (all sizes) are printed at 300 dpi. Here's what Apple send me regarding the books printing and material quality:
I contacted Apple and asked for information that I could pass on. Here's the reply I received from Apple:
"Thank you for contacting the Apple Print Products Customer Service.
I understand that you would like to know the printing process that is used and the color mode the files should be in, so you can better advise users in the iPhoto forum.
iPhoto version 4 or later, allows you to import and print files through the Apple Print Product service as RGB, grayscale, or CMYK color space. JPEG files with RGB color space are recommended for best results.
While iPhoto 2 can import files of various formats, including RGB color, grayscale, and CMYK, this version requires JPEG files with RGB color space when printing photos and books.
For more information regarding iPhoto 2, please visit the following article:
iPhoto: Color, Black and White Prints Appear Garbled or Distorted
For more information regarding iPhoto 5, please visit the following article:
http://docs.info.apple.com/article.html?artnum=165501
Here are some of the technical specifications for the books, cards, and calendars. I hope this gives you an idea about their quality and form.
BOOKS
All iPhoto books are printed using acid-free paper for long-lasting image quality. The photos are printed at a high resolution (300DPI if you use iPhoto 6). There is no external modification--such as sharpening or contrast adjustment--of the photos; what you see in the application is what is printed in the book.
Hardcovers Books
The cover is hard-bound and covered in linen. You select the linen color during the book-ordering process. The hardcover books have a solid, stiff binding that is glued and crimped. The internal pages, measuring 8.5 x 11 inches, are printed on McCoy 100# Text Gloss paper stock.
Softcover Books
The softcover books come in three sizes:
- Large 8.5 x 11 inches
- Medium 6 x 8 inches
- Small 2.6 x 3.5 inches
All of the softcover books have internal pages that are printed on McCoy 100# Text Gloss paper stock. The large softcover book has a white cover (Kromekoteplus Folding Cover, 16 point) with a cutout on the front that reveals the cover-page photo in the book. The covers for the medium and small softcover books have the cover image and title printed directly on the cover. All of the softcover books have a glued binding and feature a thick cover of McCoy 100# Cover Gloss paper stock.
CARDS
All cards are printed on McCoy 120# Silk Cover paper stock. The postcards measure 4 x 6 inches, and the greeting cards measure 5 x 7inches.
CALENDARS
All calendars measure 8 x 10 inches and are printed on McCoy 100# Silk Cover paper stock.
To ensure the best print quality, we have chosen to use Kodak NexPress technology. The press uses a dry toner, which is fused to the surface of the paper. Please see NexPress' site for more information:
KODAK NEXPRESS 2500 Digital Production Color Press
I hope you find this information helpful in answering questions on the iPhoto forum."
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
MBP 2.16Ghz; G5 Dual Core 2GHz, 2G RAM ea, 250G HD; G4 Dual 1Ghz, 1.5G RAM; Mac OS X (10.4.10) 22" LCD, 710G FW HDs, Canon: SD700IS/i850/LIDE 50, Epson R200, 30G iPod, 2G Nano

Save As PDF /A Poor Quality

Hi
I am trying to save a PDF file as a PDF /A 1b
When I choose PDF /A 1b and click Save, the file is created but the resolution is incredibly poor. Text is fuzzy and when I zoom into images they are pixelated.
If I hit the Settings button in the Save As dialog and change the Image resolution to 300 PPI, the resulting PDF is fine but it is not a PDF /A and a dialog box appears suggesting that Preflight should be used with the PDF /A profile to fix any problems
I tried using the preflight feature and choose the PDF /A profile but again, the quality was incredibly poor. I edited the profile but could not see where exactly to raise the resolution so I tried changing the Images section from Inactive to Info and changed the values to 300 PPI. I saved the profile, but the Preflight utility reported an error 'unable to save/create file' when I tried to run and fix the process.
Can anyone help me produce a PDF /A that is of a decent resolution so that images can be zoomed into without losing clarity and where the text is not fuzzy/hazy please?
Many thanks.

Thanks to both of you for your replies.
Here's what we do:
We create PDF versions of MS-Word, MS-Excel, CAD, MS-Access, MapInfo documents. We use CutePDF Pro to merge those PDF's into a single document. Later, we may use Adobe Acrobat to create a smaller file via the virtual Adobe PDF printer which is suitable for transmitting via email. When we create a smaller sized file we do not see a drop in quality. The view options are set so that 'what you see is what you get'.
The original document looks fine and we can zoom in and see small detail in the images and the text stays sharp - same with the smaller file size versions.
We create a PDF /A for archiving because we have to deposit these files with professional archiving services. The people who run this service require PDF /A PDF's which are searchable - this means that text has to be retained. One of things I noticed when watching the output during the PDF /A creation process was that many pages were being converted into images which is of no use to us as the ability to search will not be available.
Regarding the transparency question I have no idea. I will research this and find out how to run the transparency flattener. Hopefully, that will resolve this.
Thanks again for your help!

DVD poor quality

I just created a DVD but the video quality is too poor to use. I get 'ghosting' or flicker with motion, which is 99% of the content.
A client gave me 14 home-made DVDs containing video of high school basketball games and asked me to create a highlight video. I edited the VOB files in Premiere CS4 (4.1.0) to pull highlights and compile them into a single highlight DVD.
I exported the video to Adobe Media Encoder (4.0.0.374) to create a F4V file to be used on websites. I used the standard preset. The quality of the F4V video is good.
I then used Adobe Dynamic Link to export to Encore CS4 (4.0.0.258). I burned a DVD and the result was a DVD with poor quality.
There is a brief clip in the highlight video that I recorded myself of the athlete providing a short introduction of himself. That clip and the still titles I made look good on the DVD, but the highlight clips from the client's DVDs are very poor.
From some of the discussions I've already read in this forum, I assume I need to change a field option or the Anti-flicker value under Effect Controls or something similar, but haven't figured out what yet. Also, when I make changes to values, do I have to burn a DVD to see the result of the change or is there a better way to preview?
Thanks for your help!
Dan

A client gave me 14 home-made DVDs containing video of high school basketball games and asked me to create a highlight video. I edited the VOB files in Premiere CS4 (4.1.0) to pull highlights and compile them into a single highlight DVD.
It is very likely that the double MPEG-2 encoding is degrading the material too much. Is it possible to get back to the client's original tapes? That would save one MPEG-2 compression. Otherwise, what you have is probably as good as it will get.
Good luck,
Hunt

IPhoto album to iMovie to iDVD, poor quality of projected images

I am preparing a slide show of digital photo images. The finished product shows poor quality images. I am import the images as an album to iMovie, add a few title slides, then export either to media file or directly to iDVD. The results remain unacceptable when projected on a flat panel HD TV. Where am I going wrong?
Marks 3

If you are using the Share ➙ iDVD menu in iMovie, don't. Use the Share ➙ Media Browser menu option and then drag the movie frome the Media/Movies pane in iDVD into the projects menu window. The Share ➙ iDVD route noticibly degrades the resulting movie. What size movie are you sending to iDVD? It should be Medium or Large.
What size images in iPhoto are you using? They shoujld be cropped to the 4:3 size ratio for iDVD before adding to either iMovie or iDVD.
Have you considered creating the slideshow in iDVD by adding the album of photos via the Media/Photos pane in iDVD. I've found I get better results that way. However, there is a 99 slide limit with that workflow.
What do you mean by poor quality. When going from a photo on your monitor to a TV screen the media gets resized and compressed/encoded down to 640 x 480 which can't duplicate the high resolution of the original image viewed on the monitor.
OT

Poor Quality Export to AVI

Hi im a newcomer to Premier Pro and need some help in adjusting my settings for exporting my video.
The video in question is made up of 5 seperate videos (created from still jpegs with ImageVideoMachine at 1024x768 with 24fps and 1080HD Profile). When I view these videos seperately they are good quality and do not have any problems. However after i imported them to Premier Pro and added an audio track in the background and a small bit of text the quality after export is really bad in places.
I have tried lots of different settings in the export but just cant seem to get it right. The main problems that seem to occur is when the camera moves quickly from one scene to another and it seems to get very blurry and pixelated and sort of like half the scene is catching up (hope this makes sense!).
The entire video is only 4 and a half minutes long so I am not too worried about the size of the file. Any help would be greatly appreciated as im at a loss what to try next and the poor quality of the video takes away so much from my hard work in creating the presentation.
Hoping you can help
Alan

Just as further information for anyone who can help. These are the properties of one of the five .avi files I created using ImageVideoMachine. As I said these play at a good quality and without any pixelation of blurriness.
1.avi
Type: AVI Movie
File Size: 32.6 MB
Image Size: 1024 x 768
Pixel Depth: 1024
Frame Rate: 24.00
Total Duration: 00:00:41:21
Average Data Rate: 797 KB / second
Pixel Aspect Ratio: 1.0
AVI File details:
Contains 1 video track(s) and 0 audio track(s).
Video track 1:
Size is 32.58M bytes (average frame = 33.20K bytes)
There are 76 keyframes, 929 delta frames.
Frame rate is 24.00 fps
Frame size is 1024 x 768
Depth is 24 bits.
Compressor: 'DX50', ffdshow Video Codec
Now these are the properties of the best quality export from Premier Pro after I edited my video. Although this is my best quality export it is still very poor quality compared to the original videos I am using to create it.
Type: AVI Movie
File Size: 212.6 MB
Image Size: 1024 x 756
Pixel Depth: 1024
Frame Rate: 24.00
Source Audio Format: 48000 Hz - 16 bit - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:04:11:00
Average Data Rate: 867 KB / second
Pixel Aspect Ratio: 1.333
AVI File details:
Contains 1 video track(s) and 1 audio track(s).
Interleave: 1 : 24.00
Video track 1:
Size is 166.44M bytes (average frame = 36.10K bytes)
This movie appears to have DROPPED FRAMES
There are 28 keyframes, 5905 delta frames.
There are 91 empty frames.
Frame rate is 24.00 fps
Frame size is 1024 x 756
Depth is 24 bits.
Compressor: 'DX50', ffdshow Video Codec
Audio track 1:
Size is 45.95M bytes
Rate is 48000 samples/sec
Sample size is 16 bits
Hope this helps you to understand what im trying to do here.
Thanks again
Alan

Office Web Application PDF rendering poor quality

Hi
We have a customer using SharePoint 2013 and Office Web Application to provide PDF and WORD documents to partners. Now we ran into the problem, that all PDF are rendered in such a poor quality, that it is hard to read the PDF document, because it
is so blured. DOCX documents are also compressed, but readable. If the user downloads the PDF file, the Quality of the PDF is good.
That is how it looks in Office web application:
This is the same file downloaded and opened with the pdf client:
Is there any solution for this problem? Does Microsoft planned any update on this?
Thanks
Michael
in2brain

Hi Michael,
Are you using a monitor with high resolution?
Per the following information, if you are using a monitor with high resolution, the pdf rendered by OWA from browser will look blurry, as a workaround you can open PDF file using PDF client software currently.
"The Word Viewer in the WACs converts documents (including PDFs) to PNG images at 96 DPI which is likely why the users are seeing blurry text if they are viewing documents on a high DPI device/monitor (>200 DPI)."
Thanks
Daniel Yang
TechNet Community Support

Poor Quality Text in Titles

Similar Messages

Maybe you are looking for