Poor reception after installing new software !!!!

I have the iphone 3gs & on trying to download a ringtone from my itunes, was told i had to update my software to the ios 5.0, upon doing so & once my phone had switched itself back on i now have a really bad reception which can go from 1 to 5 bars then to no service & also when i go into my satting my carrier can go from being blank to vodafone uk which is my network, also on my main screen at the top where my vodafone sigh is it often has a small circle next to it.
I have phoned vodafone who reset my phone, which made no difference & also phoned apple which wasnt much help either.
As im saying my phone worked perfectly untill i installed this 5.0 & im now ready to throw my phone out of the window :-(
If anybody has any ides or help with this i would be grateful
Gill

Usually this is because the activation server is temporarily unavailable. Try again in 20 minutes or so.

Similar Messages

After installing new software for i phone it give me statement your phone could not be activated because activation serer is temporarily unavailable

after installing new software for i phone it give me statement your phone could not be activated because activation serer is temporarily unavailable what should i do ???

Usually this is because the activation server is temporarily unavailable. Try again in 20 minutes or so.

ITunes. After installing new software, what does "restore iPod" mean? Does it mean to restore all games and data to the new software or does it mean to "undo" the software update?

iTunes. After backing iPod to computer and installing new software, what does "restore iPod" mean? Does it mean to restore all games and data to the new software or does it mean to "undo" the software update?

You can restore your iPod to "New" which will erase every thing and install fresh iOS software or you can restore to a particular backup that you have previously created. In this case, your iPod Apps & data will appear as per the backup. Note that some content is not in a backup and will need to be synced back to the iPad from the iTunes music library or from, for example, the iPhoto photo library.

Iphone 5 keep dropping calls, after installing new software

since instaling new software, my phone keeps dropping calls, with message call failed.....

Hi Ricardo Jame,
Here is an article for you that will help you troubleshoot this issue with your cellular data connection:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/TS3780
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Troubles with Ipod after installing new software

After installing the new software on my Ipod Mini 4GB, it won't charge, or at least, it sais it won't.
I have a USB power adapter, and I charged my Ipod all night. This morning, I STILL got this
http://www.sharksdiest.com/stephane/ipod.jpg ...
I already tried to reset the Ipod several times...I tried to connect it to my PC (Windows XP), but also that didn't work, so I can't install other software.
Does anybody thinks he/she has a solution? Should I go to the store (I already send them an e-mail several minutes ago). Or is my Ipod dead, and should I buy a new one?
Thx for your help

Usually this is because the activation server is temporarily unavailable. Try again in 20 minutes or so.

Problem after installing new software on torch 9800

Hi,
after installing the new software version 6.0 Bundle 3159 my blackberry tells me that:
uncaughtexceptation:
Application
net_rim_bb_nabsync_114(261) is not responding;
process terminated
but also there is an e-mail that doesn't work when I wan´t to open it fist of all it doesn't open then suddenly the screen turns white and it tells me something and below it there is a button to reset. If I click on the button the phone restarts

Friend should do an update again your team blackberry.
Remember to make a backup with Desktop Manager and the BlackBerry protect
Having BBSack to apply wipe, factory reset wipe more, following which you do a software update via Loader.
Software For BlackBerry® Torch™ 9800 smartphone
BlackBerry Handheld Software v6.0.0.3170 (Multilanguage)
Package Version: 6.0.0.3170
Consisting of:
Applications: 6.0.0.756
Software Platform: 6.6.0.252
File name: 9800M_PBr6.0.0_rel3170_PL6.6.0.252_A6.0.0.756_Vodafone_Spain.exe
File size: 171.22MB
https://swdownloads.blackberry.com/Downloads/entry.do?code=15D4E891D784977CACBFCBB00C48F133
Regards.
Kudos ** Do not forget to give those people who help and advise you regarding your questions ** Can
Accept as Solution to ** Comments **
@gutijose14
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

Another volume control problem after installing new software

I'm having a different volume control problem than the previous poster.
When I turn my ipod touch on, the volume control stays on the screen. I can't do anything to get rid of it. When I go into settings/sounds, the control goes away on the screen, but it will not let me turn the volume up. When I try to listen to music through my headphones, I can turn the volume up but then it automatically turns itself down. The same thing happens when I try to turn the volume up from the side control. It worked fine this morning before I installed the new software and now it's acting buggy. Any ideas on how to fix this?

Friend should do an update again your team blackberry.
Remember to make a backup with Desktop Manager and the BlackBerry protect
Having BBSack to apply wipe, factory reset wipe more, following which you do a software update via Loader.
Software For BlackBerry® Torch™ 9800 smartphone
BlackBerry Handheld Software v6.0.0.3170 (Multilanguage)
Package Version: 6.0.0.3170
Consisting of:
Applications: 6.0.0.756
Software Platform: 6.6.0.252
File name: 9800M_PBr6.0.0_rel3170_PL6.6.0.252_A6.0.0.756_Vodafone_Spain.exe
File size: 171.22MB
https://swdownloads.blackberry.com/Downloads/entry.do?code=15D4E891D784977CACBFCBB00C48F133
Regards.
Kudos ** Do not forget to give those people who help and advise you regarding your questions ** Can
Accept as Solution to ** Comments **
@gutijose14
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

Wifi connection with 4s not working after installing new software ios6

wifi connection with 4s not working after installing ios 6.

Go to Settings > WiFi > Select your network and hit the right arrow to "Forget Network"
Then go to Settings > General > Reset Network Settings and try connecting again when the phone restarts.

My wifi had very poor reception after installing the new iOS 7? I think

Ipad probs with my DMQJRB2YF18Y model A1460 fccid BCGA1460
I Have done sll the reset, check router, blablabla .... Even went to mcD and could not connect there. I have reception, close ( where I can see router) 3 bars, far ...next level of house (where it used to work) the small little dot of the 3 bars. .??
My wife has a ipad2
I have an ipad3
She has reception without a problem any distance from router.
I had reception anywhere in the hose, but now I must be within line of sight to have wifi.
I never dropped, changed or did anything hut upgrade the software when Apple said i should.
My ipad is now nothing more than my biggest frustration
I have done everything i could find, like switch off both the pad and router, reset ipad,forget network, delete history, delete cookies, etc etc .....
Apple tries to blame the problem on the user or the environment ..... Only problem .... We have 2 devices, of which one is very happy and one is very bad bad bad to say the least!-

IOS-7 cured my acne!

13" 2006 Macbook startup issues after installing new software

Okay, so I get the gray screen flashing between with the circle and the line going through it and the folder with a question mark. I press command + s when attempting to start up my computer and I get this message:
efiboot loaded from device: Acpi (PNP0A03,0)/Pci(1FI2)/Ata(Primary,Slave)/HD (Part
2,SigAE7AFD26-567D-4D18-8853-819F9A7E9DCF)
boot file path: \System\Library\CoreServices\boot.efi
.Loading kernel cache file ;System\Library\Caches\com.apple.kext.caches\Startup\
kernelcache_i386.95143169'
Loading 'mach_kernel'...
Could not open file 'mach_kernel'
Error loading kernel 'mach_kernel' (0x8000000e)
Can anyone help me?! Or is this the end of my 8 year relationship with my Macbook

Its kernel couldn't be loaded. This means that you have to reinstall Mac OS X.
If you have the OS X DVD, insert it, hold the C key while your Mac is starting and reinstall Mac OS X. Finally, run Software Update and install the latest version

Ipod dead after installing new software

Hi,
I downloaded updated software for my husband's 3g nano (last year's birthday present), so that I could install the Nike sport software (this year's birthday present!). The ipod software downloaded and installed fine, I didn't do the Nike one.
The next time he tried to turn on the ipod, there was no response at all.
The 'lock button' is not on.
Plugging it into a PC with a USB cable that works with my own ipod (same model)has no effect.
It appears to be completely dead.
It is only a couple of weeks out of warranty, bought 21/09/2007, fired up 29/09/2007 or later.
We have 5 ipods in the family at the last count, and mine is my third since the first one came out. We are definitely loyal customers, so I would hope that Apple might see it's way to stretching the warranty a fraction and sorting this out for us.
To whom can I appeal for help?
Regards
Angie

Wow. Thanks Mitch. When I saw the direction you were going, I thought that couldn't be the problem. But, I decided to remap the ipod anyway, and that was the problem. Thanks again

After installing new software updates, my internet pages don't load

Yesterday I was prompted to "new updates are ready to install", so I did. But now my internet pages either don't load when I click on a site, or are really slow loading. Anyone else with this problem?

Are you using Safari? There have been some issues with Safari 5 and third-party plugins. Disable any plug-ins you may have installed and restart your Mac.

Speakers don't work after installing new software

I have a 2nd gen iPod touch. Before I downloaded the 3rd gen software, the speakers worked perfectly fine. However, basically none of my apps worked anymore and the upgrade was only $5 so I said "Hey. Might as well."
Unfortunately, I can no longer play any music/sounds using the speakers anymore. Without any headphones plugged in, the volume adjust bar doesn't even show up. The side volume control buttons are unresponsive. I know the thing still has speakers, it just doesn't want to use them! Does anybody know what I am doing wrong?
thank you!

I have the same problem... my sound bar works... but no sound... also video starts freezing as well as a few games... restored 8 or 9 times but it still does not work.....

Problems with Java 1.5+ after installing new "Software Updates".

I downloaded the regular 'software updates', now my macbook pro won't open Vuze, instead coming up with the message " Cannot launch "Vuze Installer". No compatible version of Java 1.5 available." Then it won't let me "Open Java Preferences". What do I do???

This is silly. Just because you don't know Vuze doesn't mean there's no problem with this update. My friends are having the same issue, of course we are looking at possible problem from Vuze's part but we cannot really say this update has 100% nothing to do with Vuze's launch failure, can we?
P.S. Since Vuze is not banned by law, it's still legal to use it. It's up to people if they want to use it for good or bad.
dogquake

HT5654 after installing new software phone stuck on terms, can hit agree nothing happens

the phone is stuck on terms? does nothing after agreeing to terms
the same down load worked great on my phone

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Next try signing out and then back into Settings>iTunes and App Store

Poor reception after installing new software !!!!

Similar Messages

Maybe you are looking for