Poor sound quality when connected to the TV

I'm using the Dynex TV connector ( http://www.bestbuy.com/site/olspage.jsp?skuId=7826748&type=product&id=1142295759 733 ) to connect my iPod Classic to the tv and it works - sort of. The picture is great but the audio is poor. I have my iPod audio level set all the way up and the tv on full blast but the sound still comes out barely above a whisper - even on the shows that I have bought through iTunes. Any ideas?

Hi gugulino1,
"the network is too busy at the evening"
The speed drop is caused by the BWdetection iChat tests at launch, probably when idle it is not at full capacity, iChat detects the idle low bw. I wonder if it would help to transfer a file high speed and launch iChat when the fast transfer runs. That bandwidth would be fantastic.
Yes, the audio has to use less bandwidth in favour of the video when signal is declining. That was a choice. Actually I'm very glad to hear iChat video works on this network. It means that you can iChat in trains and stuff anywhere as long as you have that IP and network presence. No more routers and settings, or a combination of dsl and UMTS would be powerful.
The network is still very small so I guess it's bandwidth capacity gets"less broad" when more users are starting data intensive net traffick like audio / video streaming. The network has not yet reached the intended coverage and Switserland is not the easiest to cover. So yes, congestion may be very well causing this, since there are not a lot of users yet I do not exclude interference. Sony phones are on 2.4 and they interfere with the Airport.
This antenna though should overcome this problem, if you can videochat clear and sweet during the day the bandwidth needs a little extra and this antenna device gives just that extra push. For certain it is advisable untill the network is up to speed in Europe.
Nice to have an early adaptor in the Forum, welcome.
JP
https://evdo.sslpowered.com/Secure-Antenna.htm

Similar Messages

  • Poor sound quality when using air play

    How do I fix poor sound quality when using air play with my Denon receiver?

    I am not too sure if this is affected by BT software stack or RF design...
    iPhone 3G with FW 2.x provides Cisco VPN as well as Email support for corporate usage. However, it's weird that business man wouldn't want to use BT headset and talk to people... We are not asking about new feature support, like A2DP, but reliable, stable BT connection ONLY!!
    I've read that lots folks spent a lot of money on purchasing many different BT headsets and tried to get it work with iPhone 3G. I myself tried: Plantronics 510/815/855, Sony HBH-DS970/980, Nokia BH-903. None of them can work fine with my iPhone 3G ever! And iPhone 3G even cause BH-903 and DS-980 hang up after pairing or finishing call!!
    That's why I don't believe it's just a "SPECIAL CASE". How could a product FOR BUSINESS purpose get this kind of basic function problem?
    I hope we will find this issue could be resolved completely with new F/W, like Safari crash problem before. Other than this BT IOT problem, iPhone 3G is really the phone/companion could provide complete solution fulfill my personal and business needs.

  • Some of my WMA files have poor sound quality when transferred to my

    I just got the 60 GB Zen and have been busy loading it up with my music. I have all my CDs ripped onto my computer in WMA format and have been transferring them to the MP3 player. The strange thing is that some of the CDs transferred with very poor quality and others are fine. They all sound great when played off the computer. There is no pattern to which ones sound scratchy and slow (some were ripped from actual CDs and others were burned copies). Has anyone else experienced this? What can I do to fix it's Thanks for your help.

    I think all of the CDs were accidentally ripped with the protections on. I will try again without and see if that fizes anything. I will let you know how it works out.

  • Making sound noise when connect to the electricity plug

    I am using Pavilion dv6-2150us notebook.
    My problem is when I connect to the electricity plug my note book makes sound noise when I on the sound. I could not use the wound while connected in electricity. Please help to solve this problem

    http://support.apple.com/kb/TS3281
    try restoring the iPhone but if no change
    Then take it to an Apple Retail store with $199 and exchange for a refurbished replacement

  • Poor image quality when posted on the web

    Hi,
    When posting my iWeb pages on the web, the images look very poor compared to iWeb. When importing images to iWeb the image size is around 240 kb and when downloading the same image from the web after posting the image size is reduced to 52 kb and with a clear difference in quality. Why is that?
    For info, my Optimize setting is set to OFF

    Welcome to the Apple Discussions.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • Poor sound quality in timeline and export; fine in Source?

    Hello all.
    Newbie to Pr but experienced pro in digital audio. I'm stumped and know I'm just missing something somewhere.
    I've made a music video for one of my songs. The graphics are all done (in AE), imported to Pr and eveything looks great. I import the final mix of the audio and it sounds very low quality when played from the timeline and in the final output, regardless of format (I've tried several presets and custom settings as well). I played around and noticed that the audio sounds fine when played from the Source window inside Premier.
    The Pr session is comrised of 18 video tracks (not all playing at once, of course) and one stereo audio track.
    I've tried re-exporting the audio from Logic at different bit depths, sample rates and file formats (mp3, wav, AAC, etc) but the results are the same every time: Source (Pr)sounds fine, Logic output sounds fine, rendered / timeline playback sounds like very low quality mp3 and final product sounds just as bad.
    I've tried everything I can think of. I hope one of you can show me what I'm missing.
    TIA!
    Mark
    Premier Pro CC
    Processor  2 x 2.8 GHz Quad-Core Intel Xeon
    Memory  8 GB 800 MHz DDR2 FB-DIMM
    Graphics  ATI Radeon HD 2600 XT 256 MB
    Software  OS X 10.9.1 (13B42)

    Thank you for the reply!
    I was experiencing the same results no matter what export settings I used. Plus the poor sound quality was present in the timeline itself, without even exporting the project.
    I finally threw my hands up, started a completely new project, drug the same audio file in... sounded fine. Copied / Pasted the video clips from the original, broken project and boom, eveything is fixed. Yeah, corrupted Pr file it turns out. All I had to do was start a new project and import all the old components.
    I've had to do this in Logic a lot (increasingly, these days). I just wish I'd tried it 10 hours earlier! Ha.
    Anyway, problem solved, and thanks very much!

  • I have mainstage 3 installed and works 1oo% when connected to the battery, but when connecting to the mains for charging the program crashes. sounds do not obey. is one, even very bad horrible latency. and I need to work on music not only in time but the

    i have mainstage 3 installed and works 1oo% when connected to the battery, but when connecting to the mains for charging the program crashes. sounds do not obey. is one, even very bad horrible latency.
    and I need to work on music not only in time but the battery after that.
    I ask for help please

    Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
    Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
    Thanks again!

  • Every time i go on the internet the sound starts messing up but only when connected to the internet.

    1- Product name and number: Compaq CQ57 302EA 4GB
    2- Operating system installed: Google Chrome, Windows 7 (was already onlaptop when got new from store)
    3- Error Message: From bullgaurd saying I have a virus but have sorted the problem and there is no virus no longer.
    4- Any changes made to your system before the issue occurred: I have installed games and music of the internet.
    5- In the subject title, include a brief, specific description of the problem, and your product information: Compaq Laptop. Every time i go on the internet the sound starts messing up but only when connected to the internet what can i do to fix this problem?

    #You need to check your home page settings if the pages open immediately everytime you start Firefox.
    #Sometimes, things that you download and install will change your home page. When installing anything, be observant, be sure to look for check boxes during install of anything that allows you to un-check items and not install toolbars and/or make changes to your home page.
    #Firefox can have multiple home pages separated by the "|" keyboard character.
    #It sounds as though your home page setting might be: "When Firefox starts: Show my windows and tabs from last time"
    #See: http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You need to update some plug-ins:
    *Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]

  • Poor sound quality on airtunes and airport express

    I recently configured a new Airport Extreme base station and two airport expresses. I used the airport expresses to extend my network but the sound quality is very poor when I run itunes no my stero. can anyone tell me why and how to fix it. The sound is very scratchy and there is no volume.
    Rich

    Dear All,
    I'd like to follow up because I think that the answer to why I am getting poor sound quality my be in how I set up my wireless network. I'd like to get some feedback about this and some help about how to correct it.
    My wireless network has three components.
    1. "Base Station" which is a new Airport Extreme.
    2. Unit "Number 1" which is an Airport Express located in my living room and connected to my stereo. it is 30 feet away from the "Base Station."
    3. Unit "Number 2", also an Airport Express that is upstairs in a bedroom and connected to a ruby imac. via its ethernet port.
    Wireless strength is excellent in all locations and all other services are working well from a laptop, the ruby mac or the imac. My problem only seems readily apparent when playing itunes through the stereo's speakers.
    My wireless system is configured as follows:
    Base Station: Wireless mode is set to participate in wireless network and to allow this network to be extended. The WDS mode is main and is set to allow wireless clients. The two airport expresses are identified by ID number as remotes.
    Unit 1 and 2 are configured as WDS remotes and to allow wireless clients and identify the base station as WDS main.
    I recently configured a new Airport Extreme base
    station and two airport expresses. I used the
    airport expresses to extend my network but the sound
    quality is very poor when I run itunes no my stero.
    can anyone tell me why and how to fix it. The sound
    is very scratchy and there is no volume.
    Rich

  • Poor sound quality, Airport Express

    Hi,
    I have this 2 yrs old airport express but it has all of the sudden a really poor sound quality.
    When I connect it to my home stereo and play through airplay and if I connect headphones the sound is very poor and scratchy
    I've used 3 diffferent cables to connect it to my home stereo and i've tried 2 different set of headphnoes.
    When i connect directly to my home stereo with RCA cable the sound is fine.
    Is the only solution to buy a new airport?
    Thank you.

    Based on your description, it appears that the base station's internal DAC is the issue and may be failing. Unfortunately these are not user replaceable parts and a complete base station replacement may be the only option at this point in time.
    One other option to try, if your stereo supports digital optical input, is to use a mini-jack Toslink cable connected between the base station's audio port and the stereo to see if you can get "clean" sound this way.

  • Having a poor sound quality

    Recently I am having trouble with poor sound quality. I am using software
    OS X 10.8.5 (12F45). when i turn on the macbook pro i can hear normal sound before log in my account. When hearphone is connected it gives the normal sound as before but built in speaker gives poor one. Guys any suggestions how to fix the problem????????

    hi Sylph!
    just checking ... was this the KB doc you looked at?
    iTunes and QuickTime for Windows: Songs and other audio don't play correctly
    if so, did you try the other possibilities listed there?
    (since you've got itunes 6.0.x, you'll need to try the QT 7 version of the waveout fix.)
    love, b

  • Extremely poor sound quality on all apps after using Real Player!

    Hi there
    On my Leopard iMac (Core2Duo) I am experiencing extremely poor 'lo-fi-like' quality on all audio from all applications including iTunes, Quicktime and Safari as a result of using Real Player to play a file online.
    I very rarely use Real Player and this was the first time I'd used it in months to even a year. The file was a simple RAM file from a store website allowing me to listen to a sample of a music file. When played, the quality was low but I expected this from a music sample, and from Real Player. However, after closing Real Player, I noticed the sound quality had dramatically dropped to an almost un-listenable quality.
    I have restarted and uninstalled Real Player with no luck. The poor sound quality still comes through my internal speakers, as well as external speakers, so it seems like a software issue.
    Not sure what to do, please can anyone help as the audio is used all day every day on this iMac!
    Thank you

    Just tried it as I did get iLife with my Mac. GarageBand froze for the first few times I loaded it up, then I managed to get it to work. Played with the on-screen keyboard which produced perfect sound.
    Closed GarageBand, restarted iTunes, tested, working perfectly! Crystal clear sound back again!
    Thanks so much for that, really appreciated!
    =]

  • IPod Photo: Poor Sound Quality - Updates

    As most of us who have bought the iPod Photo already know, the sound quality IS FLAWED. The distorsion (or background crackling) of high frequency/high output sound (such as piano, high output electric guitar & some deep bass output - however the vocals seem to be fine) is there and something needs to be done about it. Some good examples of where this kind of problem occurs, from what I have found are: Radiohead (most of the OK Computer album), The Hives (the iPod Photo cannot seem to cope with their loud distorted guitar style & very high output), and Incubus (a lot of Morning View). Some people who are still using the tinny, lacklustre stock earbuds, or just don't listen to their music carefully enough, or listen niavely, may still not recognise this.
    I refuse to let this issue drop, as I have spent good money on what should be, a technically flawless sound player. I do like this player though (mine is 60GB). The features are good, the photo element is excellent, the 60GB storage is unrivalled, but the main function of the player, to play music, is not good for this one issue. It is so disappointing considering Apple have obviously overlooked this issue (or simply let it slip by thinking nobody would notice), for what is otherwise an excellent piece of equipment.
    I record all my music on iTunes, using the MP3 encoder. Some people think the MP3 encoder in iTunes is poor, but it is as good as most. It is all ripped at 224kbps VBR. I use Shure E2c earphones, which are also excellent, and by far the best value for money if you're looking for a warm tone & deep bass in your sound. The step up in price to the Shure E3c might be worth it if you prefer a more detailed, but possibly colder sound.
    All that considered, there is absolutely no reason why the sound should be poor on my iPod Photo (when it is fine on the iPod Mini, and using Audio software on my PC), apart from there being a hardware/software glitch. There simply must be. Either that, or something in the sound has been compromised to accomodate the photo elements or colour screen.
    I have sent an e-mail to Apple regarding all this, and will hopefully hear from them soon about what is going to be done to resolve this. I will keep this post updated as and when I hear news from them. I also have a case number in motion with their customer services department, and they cannot ignore this anymore.
    Something must be done! Redeem yourselves, Apple!

    yes i know what distortion and clipping are - i don't hear them.
    anyway perhaps this website:
    http://www.dapreview.net/content.php?article.133
    has a solution that will work for you, it's at least worth a try.
    here's a sample:
    "All mp3 files have a default volume tag of around 95 to 105dB (decibels - a unit of loudness). When the iPod plays at this output volume, distortion does not occur. When you boost the iPod's bass however, with the equalizer, you are increasing the volume of the lower frequencies past this value (in order to make them more prominent amongst the other frequencies of the sound), and this, in turn, causes clipping and distortion. Basically, the iPod's amp is trying to output a volume that is greater than its inbuilt volume limit - so it serves crackling. By using MP3Gain to reduce the volume tag of your mp3 files to around 89dB, we can leave some headroom to further boost some frequencies without overdriving the iPod's amplifier."
    "For example: if you boost the 60Hz frequency (low bass) by around 10dB, the iPod will output that frequency at 99dB (89 + 10). At 99dB, distortion does not occur. If you boost a song playing at 105dB by 10dB, however, we get a total of 115dB which, no doubt, has passed the threshold of distortion. From experience, 105dB is about the limit; we need to reduce the volume tag value of our mp3's significantly below 105dB to avoid distortion. 89dB is the value recommended by MP3Gain developers, and I concur, as this value has eliminated all distortion on my iPod that used to result from boosting frequencies via equalizer presets."
    the other "fix" that comes up time and time again involves using higher impedance headphones. I think the basic idea is to go no lower than the stock buds, stick to 32ohm+. a lot of people report problems with 16-25ohm 'phones.
    Along the same lines; you could use a pocket-dock (to get line-out) and a 3rd party amp, then use the headphones of your choice...

  • ITunes crashing when connecting to the store on Windows 8.1

    Hello,
    I had iTunes crashing when connecting to the iTunes Store with an Apple ID. I tried unsucessfully all the solutions posted on the many threads of people having the same issue. So I decided to reinstall Windows. A clean Windows 8.1 install from the Microsoft DVD. And guess what, it is still crashing! How can this even be possible?
    The problem:
    - iTunes crashes when connecting to the store with an Apple ID. It connects, briefly freezes, then crashes.
    - I can access the store without an Apple ID without crashes. But it crashes as soon as I connect with an Apple ID.
    The system:
    - A clean, fully updated, Windows 8.1 Pro w/ WMC install from the Microsoft DVD.
    - Applications I installed, along with iTunes: Adobe Reader, Google Chrome, Skype, Office 2013. Nothing else. No crapware. No nothing. These are fairly common applications that shouldn't conflict with iTunes.
    - Antivirus is the built-in Windows Defender.
    - Firewall is the built-in Windows Firewall.
    - Intel HD Graphics 3000 on an Acer V3-571-6486
    - I have not moved Apple's folder from Romaing and Local AppData of the old systems... So it's a clean iTunes profile.
    - I can sucessfully sign-in to the iTunes Store with this account on another computer
    - I have tried with multiple accounts on this computer, all crashing
    There are tons of threads about this. I tried all the solutions posted, including:
    - Adding "C:\Program Files (x86)\Common Files\Apple\Apple Application Support" to the PATH environment variable
    - Copying QTMovieWin.dll from "C:\Program Files (x86)\Common Files\Apple\Apple Application Support" to "C:\Program Files (x86)\iTunes"
    - Moving QTMovieWin.dll from "C:\Program Files (x86)\Common Files\Apple\Apple Application Support" to "C:\Program Files (x86)\iTunes"
    - Updating the graphics card to the latest available driver from Intel's website (9.17.10.3517, 2014-10-04)
    - Downgrade the graphics driver (9.17.10.3347, 2014-01-29)
    - Use the graphic's driver from Acer's website.
    - Use Microsoft's Basic VGA Driver
    - Disable the Graphic's Adapter entirely
    - Have tried to monitor the process with ProcMon, looking for a hint like a missing file or registry entry, but have not found anything helpful.
    These solutions seem to have worked for almost everyone, but not me. The crash details in the Windows Application log are useless. Faulty module name is 'unknown'.
    I am out of solutions. Is there anything left to do? Can anyone out Apple debug the dump file or something? Is there any way to contact Apple about this issue?
    Many thanks.

    Hey zoyashahab,
    Ok, so it sounds like there are two issues here we want to address, the first being the iTunes Store connection issue and the second being iTunes not recognizing your iOS devices.
    First, I'd start with troubleshooting the recognition by following the steps in here:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If after getting that running again, you still can't connect to the iTunes Store, then I'd go through the troubleshooting steps in here:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Welcome to Apple Support Communities!
    Best,
    Delgadoh

  • My iphone 4 will not turn on but when connected to the pc in itunes it says my device is in recovery mode and when i do SHIFT restore and select my ipsw it extracts then this 3914 error message appears someone help!!!

    my iphone 4 will not turn on but when connected to the pc in itunes it says my device is in recovery mode and when i do SHIFT restore and select my ipsw it extracts then this 3914 error message appears. i normal restore then it this error message appears 1601. and my iphone is in RECOVERY mode. and holding the power button and the home button doesnt do anything my latops just makes a ding sound after 6seconds. My iphone screen is just blank and will not come on and i really need help

    Has the iPod been wetted?
    Try DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Try on another computer.
    Also see:
    https://discussions.apple.com/message/12690674#12690674
    https://discussions.apple.com/message/13032101#13032101
    Last, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

Maybe you are looking for