Poor student in desperate need of help getting my Adam 4017 and 18 units functioning!!

Thought I was getting a great deal. Like the loggers. Have them hooked up but I can not link to any program. Grant it I am a novice when it comes to these things. Im a microbiologist looking for bacteria that makes electric not a programmer.
I need the most cost effective way to record data off of these loggers. Im supposesd to begin a project on friday. Dasylab? Anything. If I can just collect the numbers in a folder I can process.
Please help.
Thanks

DASYLab 13 includes an ADAM module that should work with those units.
You do need to ensure that they are configured correctly, and have unique unit ids, and that they are wired correctly. Documentation should be available on the Advantech site.
You can download the DASYLab 13 evaluation from www.dasylab.com. Choose the Evaluation mode, and select the ADAM driver under the Data Acquisition packages.
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

Similar Messages

Student in desperate need of help!

Hello,
I am taking a course online and it started today. We have to download an ebook that is used by a plug-in of Adobe reader. I have a Mac OS X Version 10.5.8 (Intel). Every time I open Adobe reader, it freezes and tells me the application is not responding. Any ideas at all would be helpful. I really need to view this book. Thank you so much!

Does "every time" in
clude cases where you are trying to open normal PDF files? When you are just trying to open the application itself? What version of Reader do you have in your Mac?
Extra line break kindly provided by the software.

Need some help getting my new Bower and Wikins mm-1 speakers on line

Hi I have the speaker system tied into my Mac 10.6.8 via USB, but nothing is happening,
Any ieas?
Thanks
Dan Page

Misfit138 wrote:
jmetal88 wrote:It's a Honeywell manufactured for Tandy in the 386 era.
All I can say is "WOW".
You're probably as old as me.
Actually I'm 19. I just found it out in the garage one day while I was collecting parts for my system build.
EDIT: OK yeah, now I'm sure it's my keyboard that's the problem. I unplugged it and plugged it back in and the combinations worked for 3-4 minutes then stopped again.
EDIT 2: I just did some more experimentation and it turns out my alt keys don't work at all. Why it's only my alt keys and why it's both of them, I have no idea.
Last edited by jmetal88 (2007-12-11 03:54:41)

TS4268 I need help getting my face time and imessage to work.

I need help getting my face time and imessage to work. It is saying wating for activation. I just got my iphone 5 2 days ago. I have reset it from the phone and from itunes on the computer, made sure I'm attached to wifi.

The 3 basic troubleshooting steps are these in order: 1. Restart your iphone 2. Reset your settings/iphone 3. Restore your iphone. Since your iphone is only a couple of days old, you should backup your device before restoring. If you don't have anything on your iphone that you care to lose, then simply restoring without a backup is fine. A quick reset of pressing the sleep/wake button (top of iphone) and your home button simultaneously and holding it until the silver Apple logo appears.

Need some help getting my G5 "SCSI" compatible

Aloha:
I need some help getting my G5 to work with my SCSI scanner.
It has been suggested that I use an Adaptec PowerDomain 29160N to connect my Lacie SilverScanner III scanner, which is SCSI.
http://www.adaptec.com/en-US/products/mac/scsi/APD-29160N/
Does anyone have any experience with this unit or another SCSI adaptor that may be of help.
I have a G5 using OS 10.4.8
Any help would sure be of use!
Thanks
Dan Page
Maui, Hawaii

Dan Page-
I've not used this card, but a quick scan of the web page says that it is compatible with Mac OSX 10.3.X. You may want to contact them to verify that it will work with your system.
Luck-
-DaddyPaycheck

Please , i need youre help ! im from Mexico and i dont speak inglish well but ill try explain me... i buy a cs5 students edicion but i lost my paswoord for the instalacion can you helpe me ? how can i recuperade my paswoord

please , i need youre help ! im from Mexico and i dont speak inglish well but ill try explain me... i buy a cs5 students edicion but i lost my paswoord for the instalacion can you helpe me ? how can i recuperade my paswoord
Creative Suites

Find your serial number quickly
Mylenium

TS2634 Please People I need some help.My iPod is disabled and when I connect it to iTunes it says: Itunes could not connect to the ipod because it is locked with a passcode...

Please People I need some help.My iPod is disabled and when I connect it to iTunes it says: Itunes could not connect to the ipod because it is locked with a passcode...how can I do it?

Place the iPod in Recovery mode and then restore.

HT201359 Hi I need your help, I am civil engineer and recently I bought an app

Hi I need your help, I am civil engineer and recently I bought an app call "sewer pipe design" . After I installed it in my iphone I found that developer is cheating people.
In order to design a sewer pipes we need to know manning coefficient commonly known as roughest. second to design a sewer pipe we don't use minimum tractive force bc is this a parameter for designing open channel on the ground/earth. i f the sewer is a prression with use another principles like loss head and Hassen William formule. So this developer is cheating apple customers.
I have already complain with apple support but they only asked me to fill another complain I did it, also they told me that asked a refund but i don find any link for doing this. what can I do??
<Email Edited By Host>

You don't say how you contacted them, so I don't know if this is what you used. You can try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account (Store > View My Apple ID on iTunes 11) and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that app and use the 'Report a Problem' link and fill in details about the problem (iTunes support should reply within, I think, about 24 hours).
Some people have had a problem with the 'report a problem' link (it's been taking people to this site on a browser instead of showing a form in iTunes) - if it does that to you then try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption.
As these are user-to-user forums I've asked the hosts to remove your email address from your post.

Hi i need sum help plzzz, iphone 3gs blackscreen and tryed evrything but wont kick out of dfu mode , much apreicated plz

hi i need sum help plzzz, iphone 3gs blackscreen and tryed evrything but wont kick out of dfu mode , much apreicated plz, it just happen wen i was restoring the screen is balck but wen i restore it from itunes it says erorr 1600 and itunes does not reconise the phone , i have tryed eveything bt still no luck , I NEED UR HELP PLZZZ ,its my disabled daughters thank you

Anyone on this forum can correct me if I am wrong. I am not judging you, but to my knowledge the iTunes error 1600 usually affects products that are jailbroken. again I am not saying that your iPhone 3GS was jailbroken. my only advise off the top of my head to assist you is to download the recent IOS firmware online. I know it is not the the #1 advised option, but it is the only option you have unless you wish to bring it to the Apple Genius bar and see if they can replace the phone or fix it themselves.

Help me i am in desperate need of Help!!!

I am trying to start Puzzlepirates and i believe its somethings to do with java, when i go to download it i just see a red X in the corner and this is the java console message,
Java Plug-in 1.5.0_06
Using JRE version 1.5.0_06 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\Jon Goodwin
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
java.net.UnknownHostException: www.puzzlepirates.com
     at java.net.PlainSocketImpl.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at sun.net.NetworkClient.doConnect(Unknown Source)
     at sun.net.www.http.HttpClient.openServer(Unknown Source)
     at sun.net.www.http.HttpClient.openServer(Unknown Source)
     at sun.net.www.http.HttpClient.<init>(Unknown Source)
     at sun.net.www.http.HttpClient.New(Unknown Source)
     at sun.net.www.http.HttpClient.New(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.plainConnect(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.connect(Unknown Source)
     at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at sun.plugin.net.protocol.http.HttpUtils.followRedirects(Unknown Source)
     at sun.plugin.cache.CachedJarLoader.isUpToDate(Unknown Source)
     at sun.plugin.cache.CachedJarLoader.loadFromCache(Unknown Source)
     at sun.plugin.cache.CachedJarLoader.load(Unknown Source)
     at sun.plugin.cache.JarCache.get(Unknown Source)
     at sun.plugin.net.protocol.jar.CachedJarURLConnection.connect(Unknown Source)
     at sun.plugin.net.protocol.jar.CachedJarURLConnection.getJarFile(Unknown Source)
     at sun.misc.URLClassPath$JarLoader.getJarFile(Unknown Source)
     at sun.misc.URLClassPath$JarLoader.<init>(Unknown Source)
     at sun.misc.URLClassPath$3.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.misc.URLClassPath.getLoader(Unknown Source)
     at sun.misc.URLClassPath.getLoader(Unknown Source)
     at sun.misc.URLClassPath.getResource(Unknown Source)
     at java.net.URLClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(Unknown Source)
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
load: class Downloadlet not found.
java.lang.ClassNotFoundException: Downloadlet
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
Exception in thread "Thread-4" java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletException(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletStatus(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
load: class Downloadlet not found.
java.lang.ClassNotFoundException: Downloadlet
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
Exception in thread "Thread-9" java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletException(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletStatus(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Exception in thread "thread applet-Downloadlet" java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletException(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Please help as much as you can or as little i desperatly need help.

Oi mate there's no need to be nasty, i was asking why
and you just throw it in my face,Nobody is throwing anything in your face. You threw a stack trace at us and said Java is broken help me.
Well Java is not broken.
The Java program you are running is broken.
But we don't know what it is doing and where it is broken. Only the people with the source for the program (puzzlepirates) can help you.
It is not my fault if they won't help you or told you Java is broken.
and it seems that the java is not working or
something else is wrong on my computerAs a wild guess there is something wrong with the DNS on your machine or proxy or something like that. This is a guess based on the UnknownHostException. But again that is only a guess and the best guess one can make based on the information present.
The problem I think is that their applet tries to do something but doesn't account for connections like yours and is blowing up because of that.
Again only a guess and in the end really does nothing to solve your problem. If you want to solve this problem email the stack trace and perhaps my comments in this post about the UnknownHostException to puzzlepirates and ask them for help.
Nobody else can help you but them.

In desperate need of help!! I feel like i'm using ...

Hi, our broadband at home is stupidly slow. Especially the wireless. It feels like im running dial up from ten years ago.
The problem has been ongoing for a long time, but i've only just returned home from uni, hence why it has taken me so long to ask for help.
After reading on the forums about the shoddy service the india call centre gives, i decided it would be best to try the forums first.
The internet is consistently slow, and it also seems to reach speeds of 0 kb/s at times, sometimes disconnecting me, other times not.
These are my ADS stats, i will add my test results from the bt speed checker once it has finished. FAST RESPONSES WOULD BE LOVED! My net even died from trying to post this, and its the only thing im running.
Bump: Twice.
ADSL line status
Connection information
Line state
Connected
Connection time
0 days, 1:21:33
Downstream
7,616 Kbps
Upstream
448 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.1
Latency type
Interleaved
Noise margin (Down/Up)
7.1 dB / 21.0 dB
Line attenuation (Down/Up)
18.0 dB / 11.0 dB
Output power (Down/Up)
19.8 dBm / 11.9 dBm
Loss of Framing (Local)
0
Loss of Signal (Local)
0
Loss of Power (Local)
0
FEC Errors (Down/Up)
655 / 0
CRC Errors (Down/Up)
6 / 2147480000
HEC Errors (Down/Up)
nil / 0
Error Seconds (Local)
5
Edit:
This Test comprises of Best Effort Test: -provides background information.
Download Speed
158 Kbps
0 Kbps
7150 Kbps
Max Achievable Speed
Download speedachieved during the test was - 158 Kbps
For your connection, the acceptable range of speeds is 600-7150 Kbps.
Additional Information:
Your DSL Connection Rate :7616 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 6500 Kbps
Solved!
Go to Solution.

Your line stats look great, your sync speed is good, and your IP profile is correct.
Your download speed is poor.
This could be :
1) Hot Virtual Path at the exchange - basically your exchange has run out of bandwidth. Do you get similar poor download speeds at all times of day and night? If you get much faster speeds in the early morning or during the daytime, then you need the help of the forum moderators.
2) Your WiFi connection is not working properly. Do you get similar poor download speeds when connected to the HomeHub via an ethernet cable? It is worth trying if you haven't done so.
3) Are you totally sure you don't have any other devices connected to your WiFi connection dragging down your bandwidth? Go the the "Home Network" tab in the HomeHub admin screens and see what is connected
4) Are you signed up with BT FON? I wonder if other people are connecting to your hub and sucking up your bandwidth? (this can cost 0.5 Mbps) Are you living in / near a very public area?
Hope this helps.

IN DESPERATE NEED FOR HELP flashing question mark appears MacBook

Hello everyone, I got this White MacBook Mac OS X 10.4.11 yesturday I was updating limewire and iTunes, I was downloading some songs from Limewire when all of a sudden my macbook frozed. I was not able to do a thing. Not even minimizing nor quiting the app nor even opening another aplication, so I decided to shut it down by holding the power button until it shut down (about 8 secs). So I restart my macbook and I got this grey=blank screen whit a flashing question mark on it. I've tried EVERYTHING on this link http://support.apple.com/kb/TS1440?viewlocale=en_US even these one http://support.apple.com/kb/HT1533 and all I was able to accomplish, was to hold the mouse (/trackpad) button to eject a Cd, and while pressing Shift during startup (in order to start in Safe Boot mode) all I get is this lock image and this space to type a password. I've tried typing every password I know and I can't fix my macbook. Can anyone please help me out on this one?

It means certain system files needed for startup are corrupted. You will have to reinstall OS X. If your hard drive is unaffected you can try the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Need some help getting my logic express 7 to work!

alright so....i bought logic express 7 about 3 years ago and i HAVE NEVER USED IT! the reason being is because i could never get it to work and gave up 3 yrs ago. i just recently came across again while cleaning out my closet...i tried again but it still wont work...i think it says i need logic express 6 in order to get it work. is this true???? if so, where can i get logic express 6? i've searched everywhere and i can't seem to find it!
can someone please help me out?? i don't want it to go to waste! please?
thanx.
-smitty

sorry disregard...i just saw the sticker that says upgrade for express...idiot!

Please I desperatly need your help!!

sorry but I need 2 figure this out fast ive been at this all day but cant seem to find the answer.
I need to write some info to a database but somehow it doesnt work.
jsp code:

<%@ page import = "project.Login" %>
<%@ page import = "java.util.Date" %>
<jsp:useBean id="Login" scope="session" class="project.Login">
</jsp:useBean>
<%
int klantid = (Integer)session.getAttribute( "qooxeid");
int order = Integer.parseInt(request.getParameter("order"));
// Get the system date and time.
java.util.Date utilDate = new Date();
// Convert it to java.sql.Date
Date datum = new java.sql.Date(utilDate.getTime());
%>
<jsp:setProperty name="Login" property="*" />
<%@ page import="java.sql.*" %>
<HTML>
<HEAD>
<TITLE>order</TITLE>
</HEAD>
<BODY>
<%
     String qooxeuser= (String)session.getAttribute( "qooxeuser" );
     if(qooxeuser == null){
%>
          <jsp:forward page="login.html" />
<%
     else{
          // write to winkelwagen
          Login.Winkelwagen();
%>
U heeft uw product net in uw winkelwagentje gelegd.
<%
%>
</BODY>
</HTML>.java file:
package project;
import java.sql.*;
     public class Login{
     public Connection connection = null;
     public boolean confirmation = false;
     public String password;
     public int klantid;
     public String username;
     public int voorraad;
     public int order;
     public Date datum;
     public int orderid;
     public void Winkelwagen() throws SQLException, ClassNotFoundException{
               initializeJdbc();
               RowCount();
               PreparedStatement sqlinsert = connection.prepareStatement
               ("INSERT INTO Ordertbl VALUES(?, '?', ?, ?, 'winkelwagen')");
               sqlinsert.setInt(1,orderid);
               sqlinsert.setDate(2,datum);
               sqlinsert.setInt(3,order);
               sqlinsert.setInt(4,klantid);
               ResultSet rsetinsert = sqlinsert.executeQuery();
               rsetinsert.close();
               sqlinsert.close();
               connection.close();
     public void RowCount() throws SQLException, ClassNotFoundException{
          // Select the number of rows in the table
               PreparedStatement sqlorderid = connection.prepareStatement(
                    "SELECT COUNT(*) FROM Ordertbl");
               ResultSet rsetorderid = sqlorderid.executeQuery();
               // Get the number of rows from the result set
               rsetorderid.next();
               orderid = 1 + rsetorderid.getInt(1);
               rsetorderid.close();
               sqlorderid.close();
     public void Login() throws SQLException, ClassNotFoundException{
         // Initialize database connection and create a Statemet object
          initializeJdbc();
          //** Execute a statement */
          PreparedStatement sql = connection.prepareStatement("SELECT Username, Password, klantid FROM Klant WHERE Klant.Username = ? and Klant.Password = ?");
          sql.setString(1,username);
          sql.setString(2,password);
          ResultSet rset = sql.executeQuery();
          if(rset.next()){
               klantid = Integer.parseInt(rset.getString(3));
               confirmation = true;
               /**Close connection**/
               rset.close();
               sql.close();
               connection.close();
          else{
               /**Close connection**/
               rset.close();
               sql.close();
               connection.close();
     /** Initialize database connection */
     public void initializeJdbc() throws SQLException, ClassNotFoundException {
               Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
               // Connect to the sample database
               connection = DriverManager.getConnection("jdbc:odbc:project");
               //** Create a statement */
               Statement statement = connection.createStatement();
     /**return username property*/
     public String getusername() {
          return username;
     public void setusername(String newusername){
          username = newusername;
          /**return klantid property*/
     public Integer getklantid() {
          return klantid;
     public void setklantid(Integer newklantid){
          klantid = newklantid;
     /**return klantid property*/
     public Date getdatum() {
          return datum;
     public void setklantid(Date newdatum){
     datum = newdatum;
          /**return password property*/
     public String getpassword() {
          return password;
     public void setpassword(String newpassword){
          password = newpassword;
     /** Return connection property */
     public Connection getConnection() {
          return connection;
}when I run the jsp file with tomcat I get this error:
org.apache.jasper.JasperException: 3
     org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:510)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
root cause
java.lang.ArrayIndexOutOfBoundsException: 3
     sun.jdbc.odbc.JdbcOdbcPreparedStatement.clearParameter(JdbcOdbcPreparedStatement.java:1021)
     sun.jdbc.odbc.JdbcOdbcPreparedStatement.setInt(JdbcOdbcPreparedStatement.java:525)
     project.Login.Winkelwagen(login.java:24)
     org.apache.jsp.order_jsp._jspService(org.apache.jsp.order_jsp:96)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
but dont think thats usefull
Lots of thanks if you can help me

sorry but I need 2 figure this out fastI think you mean that you 'need to figure' ... is it that tough to type one extra character?
ive been at
this all day but cant seem to find the answer.That should be a capitol 'I'.
I need to write some info to a database but somehow
it doesnt work....
when I run the jsp file with tomcat I get this
error:
org.apache.jasper.JasperException: 3...
root cause
java.lang.ArrayIndexOutOfBoundsException: 3
     sun.jdbc.odbc.JdbcOdbcPreparedStatement.clearParameter(JdbcOdbcPreparedStatement.java:1021)
     sun.jdbc.odbc.JdbcOdbcPreparedStatement.setInt(JdbcOdbcPreparedStatement.java:525)
     project.Login.Winkelwagen(login.java:24)
     org.apache.jsp.order_jsp._jspService(org.apache.jsp.order_jsp:96)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
but dont think thats usefullI disagree. This tells you that there is an Array Index that is out of bounds in line 24 of the login java file. So, what you need to do is to find the 24th line of the java file, look at what code you are trying to execute, (here is a hint: as per the italicized error line, the line calls a setInt method in PreparedStatement).
So why would one of the indexes you use in setInt method calls become out of bounds? Look at the PreparedStatement, and count the number of question marks. Then note that one of those question marks is different then the rest? So how would you fix that, you think?
Lots of thanks if you can help me

Newb in desperate need of help!

Hello, please excuse my ignorance on this issue.
What I'm trying to do is make a website but I want it to have a more simple URL (www.riverkfarm.com) rather than http://web.me.com/travisgkirby/travisgkirby/Home.html
Is this possible to do this using the Mobileme account I have?
I less expensive alternative for me would be to bypass the Mobileme account entirely and upload my website design from iWeb to a purchased domain name and webspace. Is this possible? I have purchased the domain riverkfarm.com from networksolutions at this point and need further assistance. Thanks for any and all advice!

You can do that. Go to a domain name provider, HostExcellence, GoDaddy, etc. and purchase the domain name you want to use, www.riverfarm.com. Create your site with iWeb and publish to MobileMe.
Next follow the instructions here: Setting up MobileMe to use a personal domain name.
At your domain name provider forward the domain name to web.me.com. Each provider will have an instruction page on how to set it up at their end.
This topic describes what you will see in the browser's URL window with the different types of domain name forwarding: Support Domain Name, what is it all about
NOTE: To get just www.riverfarm.com to show in the URL window you will have to enable domain name masking. That will force visitors to only be able to bookmark the first page of the site. It will also hinder search engines in their finding and ranking your site. Without masking you will see www.riverfarm.com/sitename/pagename. In either case if someone puts in www.riverfarm.com into the browser they will get to your site.
OT

Poor student in desperate need of help getting my Adam 4017 and 18 units functioning!!

Similar Messages

Maybe you are looking for