POP account default - sends all outgoing from GMail.

Hello all,
I have been using my iPhone with 5 POP accounts for months without issue. Just the other day, I added my GMail account to the list. Even though my primary POP account is selected as my Default Account in the settings panel, and regardless of which inbox I am in, it sends all new mail and replies from my GMail account!
From the searches i have done on these forums, the only similar problem I found had the opposite issue.
Any advice?
bjclux

have you tried checking the pop forwarding setting on your gmail account? i used to have this problem but i changed POP download option to "enable POP for mail that arrives from now on" then i am only getting the new messages.

Similar Messages

  • I have an imap account and deleted all mail from server. Once doing this all emails from my iPad -which was on a wi-fi- where automatically deleted. Fortunately these emails are still visible on my iPhone that was without connection. If I send all these e

    I have an imap account and deleted all mail from server. Once doing this all emails from my iPad -which was on a wi-fi- where automatically deleted. Fortunately these emails are still visible on my iPhone that was without connection. If I send all these emails to my iCloud account - they will remain into my outgoing folder until I open my wi-fi- …BUT will they be sent when I open my wi-fi connection, or since they are no longer on my server… be deleted for ever!?

    This is how IMAP works, if you delete from one device it will also be deleted in the other devices.
    iCloud do not backup e-mails.

  • I want to send my mails from Gmail to all of my groups but no one of them can see the others and secondly I like to send them in groups. If this app is free is better if not its ok

    1.- send my emails from gmail to groups
    2.- no one from the group be able to see the others that I send the mail. Is there any app...just name it

    1.- send my emails from gmail to groups
    2.- no one from the group be able to see the others that I send the mail. Is there any app...just name it

  • Why does my iphone send all text from only one of my contacts to my email?

    Why does my iphone send all text from only one of my contacts to my email? I'm curious to know if anyone else has had this issue with the Iphone 5s...

    imessage has a new setting that shows all emails associated with your apple id.  There are two sections, send and receive.  Since you are using the same apple id, Im sure if you adjust one of those settings to your mobile number instead of your appleid, it wont send double.
    You might also have to adjust your wifes settings too, so those emails dont overlap

  • Set up mail app but it is sending ALL events from iCal to gmail with an error...

    Previously, I had set up iCal to sync with gmail so I could have my calendar on my droid phone.  Today I tried to set up the mail app to sync with my yahoo mail account.  It works, and I can see my inbox, but for some reason when I open mail it attempts to send all of the events in iCal as alarms to Gmail.  It opens hundreds of windows and slows down my computer. Each message has an error about not having an outgoing mail server selected.  I've tried to delete my gmail from iCal to un- sync everything, but everytime I open mail it starts a domino effect of iCal alarm outgoing message windows. I can individually choose Yahoo! as the outgoing server, but it is incredibly slow and there are hundreds of them to go through...what do I do?

    Have you checked the event log to see if there are any errors during the connector processing? The events will be logged in Application and Services Logs\Operations Manager. Look for any error messages during the time the connector was syncing. Most events
    dealing with the ConfigMgr connector have a source of "Data Connectors" or "Lfx Service", but I would suggest looking through all of them from that time period. Let us know if you find anything there. 
    Matthew Dowst |
    Blog | Twitter

  • E-Mail won't send my mail from GMail account

    My e-mail keeps on telling me that it can't send e-mails from my GMail account and it's the primary account I use for sending e-mails. Please, tell me what do i have to do in order to be able to send e-mails from my Maill app on my iMac?
    photo: http://cl.ly/image/2j1s0h2d1H18

    The error message says that you don't have an outgoing mail server selected. Go to Mail > Preferences > Accounts and select the gmail account in the left hand panel. Next go to "Outgoing Mail Server" :
    It should read smtp.gmail.com if you are using pop. If it is blank click on it and it should display whatever outgoing servers you have configured. If the only option you have is to "Edit SMTP Server List" then you need to enter the information as shown below.
    These are the standard settings for gmail pop:
    You will also need to set password authentication on your outgoing (SMTP) mail as shown below:

  • Gmail pop account wont send mail

    I set up a gmail account sucessfully, recieving mail was fine but when it came to sending i kept getting a message saying 'port 465 has been timed out'. I changed the port number a few different times to recommended ports but with no avail. I decided to delete this account and try setting up again as i may have done something wrong. I now can't recieve or send mail.
    What is the correct port for a Gmail pop account?
    Why has resetting it made things worse, as they ended up being the same setting as before?

    I use port 25 with no problems for POP usage.
    The only problem i have encountered is sending files over 5mb using POP, gmail rejects them. If I spilt it into two smaller files it is happy.
    No problem receiving big files.

  • Hey can anyone help me fixing bug in sending mail auth from gmail account

    hi guys,
    when i'm trying to send mail a exception being raised at transport.send()** which is saying Authentication required though i'm provididng authentication from gmail server . Heres my code
    private static final String SMTP_HOST_NAME="smtp.gmail.com";
    private static final String SMTP_PORT="465";
    private static final String emailFromAddress="[email protected]";
    private static final String SSL_FACTORY="javax.net.ssl.SSLSocketFactory";
    public static void main(String []args){
    Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider());
    Properties props=new Properties();
    props.put("mail.smtp.host",SMTP_HOST_NAME);
    props.put("mail.smtp.auth",true);
    props.put("mail.smtp.port",SMTP_PORT);
    props.put("mail.smtp.socketFactory.port",SMTP_PORT);
    props.put("mail.smtp.socketFactory.class",SSL_FACTORY);
    props.put("mail.smtp.socketFactory.fallback",false);
    try{
    Session session=Session.getDefaultInstance(props, new javax.mail.Authenticator()
    {protected PasswordAuthentication getPasswordAuthentication(){
                    return new PasswordAuthentication("moulichandr","XXXXXXX");
    Message msg=new MimeMessage(session);
    msg.setFrom(new InternetAddress("[email protected]"));
    msg.setRecipient(Message.RecipientType.TO,
    new InternetAddress("[email protected]"));
    msg.setSubject("test");
    msg.setText("vtest mail");
    Transport.send(msg);
    catch(Exception e){
    System.out.println("error");
    e.printStackTrace();
    and exception is
    com.sun.mail.smtp.SMTPSendFailedException: 530-5.5.1 Authentication Required. Learn more at
    530 5.5.1 http://mail.google.com/support/bin/answer.py?answer=14257 i9sm6409364tid.36
    at com.sun.mail.smtp.SMTPTransport.issueSendCommand(SMTPTransport.java:1515)
    at com.sun.mail.smtp.SMTPTransport.mailFrom(SMTPTransport.java:1054)
    at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:634)
    at javax.mail.Transport.send0(Transport.java:189)
    at javax.mail.Transport.send(Transport.java:118)
    please help
    i'm using netbeans6.1 with glassfishv2

    If you turn on session debugging, you'll get a clue as to what you're
    doing wrong, but I'll save you the trouble. Your error is here:
    props.put("mail.smtp.auth",true);That should be:
    props.put("mail.smtp.auth", "true");
    BTW, you don't need all that socket factory stuff. See the JavaMail FAQ for a
    simpler approach.

  • I cannot configure the clients with POP account after migrating the Exchange from 2007 to 2013

    Hi,
    When i configure the POP account on Outlook 2010 is giving the error message
    "Send test e-mail message: Cannot send the message. Verify the e-mail address in your account properties.  The server responded: 550 5.7.1 Client does not have permissions to submit to this server"
    please help me out on this,
    Thanks in advance
    Regards,
    Murugan.S

    The OP says users can't send mail.  POP is not used to send mail.
    I strongly recommend you have users reconfigure their clients to send using port 587.  This has been the default configuration since the introduction of Exchange 2007.  You can modify the default receive connector, or add another receive connector
    to allow clients to connect and authenticate if you want, but when you do so, you will risk causing message mail flow to fail.
    I am not going to try to tell you how to do it precisely because I don't want to be a party to you messing up your mail flow.  Here's more documentation on receive connectors from TechNet.
    http://technet.microsoft.com/en-us/library/aa996395(v=exchg.150).aspx
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • How do you choose what account to send an iMessage from?

    I have one account set up on iMessage, but it can accept messages sent to my phone number, email address, plus email aliases.
    I want to retain this ability to receive messages on several accounts but I also want to force the system to send messages from my phone number, especially when using Share buttons elsewhere in the operating system.
    My default account to send messages from IS my phone number, but every time that I send a file from somewhere else in the OS it sends from my email, so I'm not sure what's going on here.
    Does anyone know a fix? Thank you

    HI,
    I understood from the first post but was not in a position to actually test it at the time
    I went to my Contacts App > My Card and removed the iPhone number.
    It syncs via iCloud to the iPhone.
    I went to the iMessages > Preferences > Accounts > iMessages account and changed the bottom drop down to read "Start From" my iPhone Number.
    In iPhoto I highlighted a Pic and then chose the Share Menu > Messages and typed in the iPhone Number.
    This meant it should have appeared on the iPhone as a Stand alone iMessages "from Itself" effectively.
    However it listed another Address Card that did not have the iPhone Number on it. (only the Apple ID in Use)
    As you say, the Share option seems to override the Send From option in Messages itself.
    One way it can be done is to disable the Apple ID in the Receive At list which then leaves only the iPhone Number.
    This will send by the iPhone number.
    8:04 pm      Thursday; January 23, 2014
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • How to import ALL MAIL from Gmail to OSX Mail?

    I am trying to migrate my mail system over to OSX Mail from Google Mail, but I can't seem to make "All Mail"  show up as an option in OSX Mail, even though I have the folder checked  in the Gmail settings to share with outside apps.  I am on Yosemite and a MacBookPro.
    How are others switching to OSX Mail from Gmail?
    Thanks for your help!
    Korky

    You open your email - edit - then select each email to delete.
    If you have an imap account you can delete it from the server and it will reflect on yoru phone.

  • Want POP account to send only

    Is there anyway to setup a POP account on the iPhone to send only? I do not want to pull my POP mail to the phone but I do want to be able to send mail using the account.

    In a word, no.
    After creating an email account, you can disable the account on the iPhone without deleting the account, which prevents the mailboxes for the account from being available, but also prevents receiving or sending message with the account.

  • Deleted a POP account and lost all mails

    I changed my POP server and, extremely stupidly, deleted my old POP account details. Now I have lost all my old emails from that account - any way of getting them back or finding the old POP account details?
    MacBook   Mac OS X (10.4.10)  

    Well, if you have deleted the accounts using the Mail client you will have lost the mail on the Mac (its always an idea to keep the mail folder ~/Library/Mail backed up, say to a CD or external HD). Best bets for deleted accounts on Mail is to check whether your mailboxes are still present or not on the POP server, or possibly to use HD recovery for the deleted files on the Mac (need to stop working on the Mac asap and get an application like Data recovery http://www.prosofteng.com/products/datarescueinfo.php or similar).

  • OOPS - POP account Deleted AND all local messages

    Well, NOW I find out that when you delete your POP account from your MAIL preference, all the messages from that account go bye-bye. Guess I am too used to the IBM world and MS Office that hangs on to your messages even if the mail server account goes away.
    SO, is there any magic pill I can give my Mac to recover/find all these messages?
    The server account is GONE and there are no messages on any server. All I have is the knowledge that there were 600 INBOX messages waiting for archiving reaching back to 2005 that are no longer visible from my mail box, and knowing that the computer took a good amount of time to eliminate that mail account when it got deleted.
    Any Doctors/pharmacists with a perscription out there? Thanks ! Jim K.

    If the messages are not on the server and you don’t have a backup (which you should have made before doing something like that), you may try to salvage as many deleted *.emlx files as possible with a data recovery tool such as Data Rescue II, TechTool Pro, or FileSalvage (the files to be recovered would be different in the case of Mail 1.x). Of these, the only one I know for sure that can currently recover deleted *.emlx files is FileSalvage. Stop using your computer right now if you want to try that, as anything you do with the computer may cause the deleted files to be overwritten.

  • How to Display All Contacts From Gmail ..?

    I hate Blur.  There's something there that only shows a subset of my Gmail Contacts.  I know on my wife's Ally and my OLD Nexus One I just went in and added the extra "groups" but I don't see that on the X. 
    How do I get to see all my Gmail contacts?
    Update: looks like it's only displaying My Contacts from Gmail, not the groups I have.

    So is the only way to get all contacts to sync across (or at least, to appear; they are on the phone, just not displaying - search and you can find them) is to make them all in the My Contacts group in Gmail?  That is pretty silly.  Isn't there another way?

Maybe you are looking for

  • Home button and volume doesn't work

    My iphone 4 home button and the volume doesn't work.  Have Besy Buy black tie protection plan but they want me to be without my phone for almost a month to repair.  I can't do that.  What can I do to fix myself?

  • PHP and WebLogic 8.1.4

    Hello, I am new to WebLogic. Searching through the archives and forums, there are many posts but no solutions for integrating PHP and WebLogic 8.1.x. Has anyone posted, or could they, on how to configure Weblogic 8.1.4 to use PHP? Second question, do

  • What are the function modules used in interactive ALV and parameters?

    what are the function modules used in interactive ALV and parameters?

  • Exception due to    Recursive substituion

    Hi all, I'm a new bie in OAF, I've Extended a VO in IRecuritment Today(Substituted the Extended VO for Seeded VO) and later got instructions that it the extension is not needed. To undo the changes i've substituted the Seeded VO for Extended VO. afte

  • Backend table update need everytime to check consistency in Admin tool

    OBI 11.1.1.7.1 Admin tool 11.1.1.7.1 DB 11g R2 When i update some column in database from back end, the updated value doesn't appear in bi reports even if i refresh metadata. I've to open Admin tool then check consistency in Physical and business mod