POP capabilities are gotten in authorization mode, and not transaction mode

I am using Javamail in an email client that requires UIDL support for POP3 servers. There are some servers that return the UIDL capability only in transaction mode, not in authorization mode (eg. pop.aol.com). I am unable to connect to such servers once I upgraded to javamail 1.4.4, since it is now looking at the capabilities before executing the UIDL command. However, it gets the capabilities in authorization mode, and servers like the one above do not send the UIDL capability in this mode. If the capabilities were refreshed in transaction mode (once login was done), UIDL would be returned. This looks like a bug. Is there a workaround for this?

This definitely looks like a bug in AOL's server, please report it to them.
RFC 2449 says:
   A capability description MUST document in which states the capability
   is announced, and in which states the commands are valid.
   Capabilities available in the AUTHORIZATION state MUST be announced
   in both states.
   If a capability is announced in both states, but the argument might
   differ after authentication, this possibility MUST be stated in the
   capability description.
   (These requirements allow a client to issue only one CAPA command if
   it does not use any TRANSACTION-only capabilities, or any
   capabilities whose values may differ after authentication.)
6.8. UIDL capability
   CAPA tag:
       UIDL
   Announced states / possible differences:
       both / noThis says to me that the UIDL capability, if supported, must be announced in both states
and must not change between states.
You can set the session property mail.pop3.disablecapa to "true" to disable the use of the CAPA
command, which will cause it to assume UIDL is supported.

Similar Messages

Second posting - spent hours on this - yesterday and today - I have downloaded the FlashPlayer upgrade (now 10 times), in Security - no pop-ups are checked, the "allow Java" and "allow other other plug-ins" are both checked. I have re-booted after the Fl

Repeat message - I have downloaded the FlashPlayer upgrade (now 10 times), in Security - no pop-ups are checked, the "allow Java" and "allow other other plug-ins" are both checked. I have re-booted after the Flash-Player upgrades - still "pop=ups blocked"

Hello,
Please provide the following information:
Your operating system & version
Your web browser(s) & version
Your Flash Player version
Explain your problem in step-by-step detail if possible
A direct link to a page that demonstrates the problem
If you get error messages, please quote them exactly, or provide a screenshot: http://forums.adobe.com/thread/1070933
Thank you.
Maria

New headset, but certain programs are transmitting sound through speakers and not headphones.

Spoiler (Highlight to read)
Hello,
Hello,
I just recently purchased a new headset for gaming but have been having some issues with it and the system sound. One major issue is when I call someone on skype, the sound from Skype or the call will go through the headphones, but any other audio comes out of the speakers. I have also notices that iTunes also does not function when I am in a call as well. Some examples would be if I were to want to watch a YouTube video while in a call, the sound would come through the speakers and not the headphones. However, I did find a fix for it. All I had to do was disable the main speakers and the audio was transmitted to the headphones. Another example would be if I wanted to run games via Steam (Garry's Mod, TF2, ect.), I wouldn't get any sound whatsoever from the game. Not through my speakers or headphones. With one exception, Garry's Mod volume I can hear through the speakers while in a Skype call, but I want the sound to come through the headphones. But with TF2, I get no sound whatsoever. If you need any more information about my issue, please feel free to ask. Thank you.
This question was solved.
View Solution.

Hello @LayneStaley,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how certain programs are transmitting sound through speakers and not the headphones, and I would be happy to assist you in this matter!
To ensure that your headphones are utilized when plugged into your notebook, I recommend following the steps below:
1. Click the Start button
2. Click Control Panel
3. Click on Hardware and Sound (sorting the control panel icons by "category"), and then click on Sound
4. Under Playback, you should see one or two speaker icons. One of them should already have a green checkmark next to it (which will be your notebook's main speakers). If the second Speakers icon is not visible, right-click in the list of devices and select Show Disabled Devices
5. A second, disabled icon of "speakers" should appear. Right-click this icon and click Enable
6. Select the newly enabled speaker device, right-click it, and select "Set as Default Device".
7. Click Apply.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

I have 100's of CDs that I have downloaded to my itunes library and they are in the library playable but they do not show up in the C drive under the iTunes Music folder under users. Why are they in the libary and not in the itunes music folder. Win 7 OS

I have 100's of CDs that I have downloaded to my itunes library and they are in the library playable but they do not show up in the C drive under the iTunes Music folder under users. Why are they in the libary and not in the itunes music folder. Win 7 OS. When I look in the library under the get info screen it says they are in the folder itunes music, under the c: drive but when I actually go to that folder to look for them they are not there....HELP!

Hello RumDog,
I think this article will help you find the media in your library.
Where are my iTunes files located?
http://support.apple.com/kb/ht1391
Discovering and changing the iTunes Media folder location
Note: You would usually only change the iTunes Media folder location to share music between accounts on the same computer. See this article for specific steps on how to accomplish this. Also, see this article if you want to know how to move your music to a new computer.
Mac OS X: Click the iTunes menu and choose Preferences.
Windows: Click the Edit menu and choose Preferences.
Click the Advanced pane. iTunes displays the location of your iTunes Media folder.
You can then:
Note where your media folder is, such as for backing up your media.
Use the Reset button to reset it's location to the default (which is the iTunes folder).
Click the Change button to select a folder for a new location. Once you change this location:
If you make a new or alternate iTunes library, the new location will be used by that library.
Existing files will not be moved unless you choose File > Library > Organize library and choose the option to "Consolidate files."
From: Where are my iTunes files located?
http://support.apple.com/kb/ht1391
Cheers,
Sterling

Sp L records are coming to the PSA and not updating in the data target

Special Ledger records are coming to the PSA and not updating in the data target in the month end and the info package is failing - because of that we are doing manual updating from PSA to the data target -
Can so one can tell the reasons why this is happening? And give the solutions to it?

Hi Sankar,
If your Infopackage uses Only PSA and Update subsequently in Data Target on the Processing tab, then you will need to add a process for Read PSA and Update Data Target in your process chain, after the Infopackage load process. Then it will take data from the PSA and load to the data target.
Hope this helps...

Hit something when editing presentation and now slides are all reduced in size and not filling screen. Preferences, scale to fit doesn't work. What did I do?

Hit something when editing presentation and now slides are all reduced in size and not filling screen. Preferences, scale to fit doesn't work. What did I do?

Please give complete details of your system and the media and the project properties.

Is it possible that theseproperties are only available for files and not f

Hello All,
I have created few properties like ReqNo (takes Integer) and ReqDate (accepts Date).
I have set the above 2 properties as manadatory. Created a Group and added his goug in 'allgroups' such that I see a tab wherein I can fill in these properties.
My questions is:
<b>Is it possible that these properties are only available for files and not for folders</b>. The reason being that even if I create a new folder, I need to fill some values in the above two mentioned properties.
These properties need to be mandatory and cannot make them optional.
Please help me solve this mystery.
Awaiting Reply.
Thanks and Warm Regards,
Ritu

Hi Ritu,
If you only want the property to be available for files and not folders you only enter data into the "Document Validity Patterns" field in the Property config.
Regards
Paul

What do you do when your contacts with IPHONES or IPADS are not showing up in blue in IMESSAGE on my IPAD. The are showing up in RED and not allowing me to IMESSAGE them at all.

What do you do when your contacts with IPHONES or IPADS are not showing up in blue in IMESSAGE on my IPAD. The are showing up in RED and not allowing me to IMESSAGE them at all.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

Why are my contacts showing numbers and not names

Why are my contacts showing numbers and not names?

When you added your contact details in the contact app did you fill in the fields correctly. For example in contacts where it says "first" did you enter a number instead of a name?

Why are messages in my outbox and not being sent on my iphone 5. I have had the 5 for over a year and never had this problem before.

why are messages in my outbox and not being sent on my iphone 5. I have had the 5 for over a year and never had this problem before.

Text messages or emails?

WHY FREE ITUNES PRODUCTS ARE AVAILABLE ONLY FOR USA AND NOT FOR OTHER USERS OUTSIDE USA

I am so impressed wit the welcome page saying "Join the conversation. Share tips and solutions with fellow Apple product users from all around the world."
Apple mentioned for their products users around the world but many of their free itunes products are available only for USA and not for the users from the other side of the globe?
Is this Apple a fair and customer oriented company or full of bias and Only money oriented company.
If apple could not make thier other FREE stuffs available outside US territory then better for thsi company to just sell their products in USA. its just so disgusting... If we need a certain apps (FREE APPS) available only for US based users.
If you think US users and other country users are paying the same prices for their iPad 3G/4G WIFI 64GB and iPhone 3G/4G 64 GB like hat I did having the 2 gadgets altogether but my investment ends to disgusting as the apple company cound not treat people equal then..... I want to return all this **** stuffs

iTunes for Different Countries
iTunes Store: Which types of items can I buy in my country?

Maverick has messed up my computer. Slow scrolling in I photo. Bookmark icons are blue all the time and not marked with the company symbols. I cannot find out how to solve this.

I switched to Mavericks two weeks ago and have had nothing but troubles. Scrolling in I photo is slow and very inaccurate. When I click and drag a photo the ones above it all flicker, making it hard to find where to put it. My bookmarks bar Icons are all blue. Before they used to show the symbol for the company they represented. Now I click on one, it changes to what I want, then a few minutes of hour later, it goes back to the blue ball, which I hate. My font size is different with every page and I have to click Zoom in all the time. I tried adjusting it in Preferences in Advance settings on the right, but this does not solve the problem permanetly. I have one web page, a hockey one, which tries to load, then I get either a black page or a white one. Driving me nuts. I need some help. Been to Apple at the store, talked to them on the phone for four hours last week. Rebuilt the I photo library with no luck. Would appreciate any help. Please Thanks. I even keep a fan behind my computer to keep it cool, that is how much I look after this baby. Some say it might be Safari? Not sure. I have little computer experience, so please it you are kind enough to reply, do not use tech talk or short forms as I will not understand any of it.

Rick,
I have a few of your issues as well: 1) Safari popular icons are all bue making them very hard to distinguish from each other. 2) My font size is also different with each page / window. What I have been able to find out is that in the Maverick OS - Apple removed one size of display resolution 2048 x 1152. Whether this is the cause of my 27" screen clarity & font size issues, I do not know - but it seems like a contributing factor. Maybe help is on the way - maybe not. Cheers

Photos are showing up in Places and not in my albums, organization.

I have the 3GS. I recently upgraded to the new software with the 4.0. It's really cool so far, except the fact that it took some of my photos out of already organized "albums" and put them into "places". I like the fact that they are recognized in the places section/tab. But I also would like to keep them in the album itself so I don't have to go searching for a specific picture that I know I have on the phone but can't find. It's just kinda a pain in the butt cause now my pictures are kinda all over my phone between "albums" and "places". And some of the places location are really off by saying some were taken in a different town when they weren't. Is there any way to reorganize them.

The photo streams are not available at the icloud.com site. The are only available on mobile devices or Macs with iCloud capatible iPhoto. If you create shared photo streams they will be online but at their specifie URL and not at icloud.com.
OT

My CR2 files are being saved as PNG and not PSD

When I import files into Elements 12 Organizer, I want to use the Instant Fix Smart Fix option. The CR2 files are being exported to the PNG format, and I want them to be PSD files, I don't have a way to return to the options of how to save my files by using the Instant Fix button. I really would appreciate some help on this. I can't seem to get any tech support by navigating the Adobe Web site - I always land in the Forums.

In PSE12, whenever I want to use the smart fix option in the organizer for a raw file, I get a dialog with various format options and the possibility to check one of those formats by default. If I check the checkbox to always use that format and not to display the menu, I find myself in the same situation as yours.
I don't know of a way to get the menu back... Deleting the organizer preferences should help, unless other users have a better idea.

Y in java objects are created on heap only and not on stack ??

Hi ,
I need a answer to the question " why all the objects are created on heap only in java and not on stack " ?
In java a object is created when we specify new i.e. for example,
consider the following cases.
1.
Vector v = new Vector();
here object is created and the reference to this object is assigned to variable v. okie.
2.
when i write something like
Vector vec ;
Here i am creating reference variable for Vector. No object is created and no seperate memory is allocated for it. Reference variablesa are stored along with other primitive variables on the java stack.
My question is, in C++ by writing case 2 i can create an object and it is creating this object on stack. So why in java object is not created on stack while i do like this ? Why in java objects are created on heap only ?
If my question is out of interest of this forum i apologize for it. But if somebody can throw some light on it, it would be of great help.
Cheers !!
Dipesh

Hi
I asked this question just to understand how compiler and jvm cud have been designed......i.e. to know the philosophy behind designing language.......
now what i cud surmise is that if objects were to be stored in stack then on calling garbage colllector , it may delete some unused obj and unreferenced object(unreachable object) and this in turn may give rise to non-contagious areas in stack, thus nullifying the garbage collector's objective of freeing the the memory. Again deallocating that intersperse spaces into one free block of space will be bit troublesome task.....
So considering above factor the designer of jvm and java compiler have opted for storing objects on heap rather than stack.....
If u have something to say bout this.......pls go ahead.......
Cheers !!
Dipesh

POP capabilities are gotten in authorization mode, and not transaction mode

Similar Messages

Maybe you are looking for