Pop is generated by rfc at sapr/3 ..i want to generated pop up at dyn pro

Hi,
My rfc generated popup at r/3 i want generated this pop up at web dynpro.
Please suggest me.
Message was edited by:
        GURPRIT BHATIA

Hi GURPRIT,
  Approach for this can be
1)RFC should have additional parameter which returns "whether popup has to be generated at Web Dynpro side and if yes, content of popup"
2) in Web Dynpro, you can check parameter of RFC and decide whether popup has to be generated. If yes, you can generate popup using WDComponent API(I am not sure, but we have done it, it is simple)
Regards,
Ganga.

Similar Messages

  • Character Generator Editor in Final Cut Pro

    At work I spent a good 30 minutes trying to find the Character Generator Editor in Final Cut Pro and could not find it. I would like for someone on here to help me to find it and list the steps in order to put text on video. On time I saw somebody using it but I could not help someone in knowing where it is.

    In the VIEWER, you'll see an "A" in a film strip below the picture area. That is a drop down menu. In there is where you'll find the text generators. The built in one called TEXT stinks. Don't use it. You want to go to the BORIS menu and choose TITLE 3D.
    Shane

  • How do I change my email account from IMAP to POP on my MacBook Pro

    My email provider has changed and no longer uses Yahoo IMAP, so I need to change the email to a POP account but my MacBook automatically chooses Yahoo IMAP when I try to create a new account.  Any suggestions how I can change from IMAP to POP?

    My email provider is BT and they have just moved me from BT Yahoo Mail to BT Mail.  I deleted the Yahoo email account and then used the Other Account option to input BT Mail, but unfortunately my MacBook decided that it still wanted me to use BT Yahoo.  So for several weeks I keep getting locked out of my mail and get the message box "Can't access mail' or something like that and wants me to put in the Yahoo mail password which is no longer valid.  I don't actually want to use POP (and actually have no idea what IMAP AND POP do!), but when I contacted BT support they suggested that I needed to use POP for BT Mail.  However having trawled the BT site I think what I was told was a load of rubbish.  So I suppose the real question is how to get rid of Yahoo Mail.

  • How to crop pages using Adobe LiveCycle ES2 PDF Generator and Acrobat 9.2 Pro Extended

    Hi all,
    I'm evaluating the possibilities of Adobe LiveCycle ES2.0 PDF Generator in order to convert on the fly (programmatically) MS Office Documents and Visio drawings into PDF files.
    I'm able to trigger this process using the Webservices API (from within C#). However when generating the PDF files in this way, each and every PDF file has a lot of white margins around it as it is generated as an 8x11 inch page.
    I have been looking in ways to crop these white margins from around the information, so that the PDF content is only showing the actual content (in order to be used as an image).
    I found a way of doing this manually by opening the generated PDF file of LiveCycle in Acrobat 9.2 Pro Extended and using the Document > Crop Pages... option.
    So my question is: Can this be done programmatically using Adobe LiveCycle ES (and/or API functions of the Acrobat tool).
    The envisioned solution would run on a server (without interaction/monitoring requirements by a human).
    Any input about this is highly appreciated.
    Kind Regards,
    Raf
    Raf Snijders

    Hi all,
    I'm evaluating the possibilities of Adobe LiveCycle ES2.0 PDF Generator in order to convert on the fly (programmatically) MS Office Documents and Visio drawings into PDF files.
    I'm able to trigger this process using the Webservices API (from within C#). However when generating the PDF files in this way, each and every PDF file has a lot of white margins around it as it is generated as an 8x11 inch page.
    I have been looking in ways to crop these white margins from around the information, so that the PDF content is only showing the actual content (in order to be used as an image).
    I found a way of doing this manually by opening the generated PDF file of LiveCycle in Acrobat 9.2 Pro Extended and using the Document > Crop Pages... option.
    So my question is: Can this be done programmatically using Adobe LiveCycle ES (and/or API functions of the Acrobat tool).
    The envisioned solution would run on a server (without interaction/monitoring requirements by a human).
    Any input about this is highly appreciated.
    Kind Regards,
    Raf
    Raf Snijders

  • How to import a in InDesign generated swf file into flash pro

    My Flash Pro does not allow to import the in InDesign CS 5.5 generated swf file.
    Any suggestions?

    Like this?
    movieholder.addEventListener(MouseEvent.CLICK, fl_ClickToLoadUnloadSWF);
    import fl.display.ProLoader;
    var fl_ProLoader:ProLoader; 
    //Mit dieser Variable wird verfolgt, ob Sie die SWF-Datei laden oder entladen möchten
    var fl_ToLoad:Boolean = true; 
    function fl_ClickToLoadUnloadSWF(event:MouseEvent):void
        if(fl_ToLoad)
            fl_ProLoader = new ProLoader();
            fl_ProLoader.load(new URLRequest("http://www.helpexamples.com/flash/images/image1.jpg"));
            addChild(fl_ProLoader);
        else
            fl_ProLoader.unload();
            removeChild(fl_ProLoader);
            fl_ProLoader = null;
        // Umschalten, ob die SFW-Datei geladen oder entladen werden soll
        fl_ToLoad = !fl_ToLoad;

  • Popping/Crackling in Soundtrack Pro

    I recently bought a new Mac Pro (Dual quad 3.0 with 4 GB Memory, tyvm...) and installed STP 1.0.3; I downloaded and installed all available updates.
    Problem: when I am using the program, working on a project, both the samples i am
    previewing as well as the exported project (exported as a .aif file) have a crackle or popping which is quite severe- I am not clipping, ie, the output levels are OK; I checked all the audio connections (although since it happens while I'm
    working on a project and just previewing clips in the browser, I realize audio connectios aren't at fault here.
    I am using internal 750 gb hardrives, and have the application on hardrive 1, with my data, samples, etc, on hardrive2.
    Any ideas?
    Thank You-

    I found this in the archives: sounds VERY similar- Could this be the problem??
    If so, couldn't one just cover the openings????
    See following:
    I just upgraded from Tiger to Leopard having waited for ProTools LE to be compatible with the new OS. Now that I upgraded to OS 10.5.4 and ProTools LE 7.4.2, every time I play anything through Soundtrack Pro (v2.0.2) I get clicking or popping or stuttering, whatever you want to call it, during playback. I didn't change any settings, but I'm no sound engineer, so I'm not sure what to check to see what is causing it. I can take the same file and play it through ProTools, Quicktime, iMovie, anything, and it will play fine, just not in Soundtrack Pro. I'm up to date on all software upgrades.
    Any help would be appreciated.
    Thanks.
    My particular G5 model has a known bug. Spent over an hour online with an Apple Tech who went through several possibilities until he found the answer. The problem is the optical ports on the backside of the computer. IF they are not being used, there might be an issue with stray or ambient light wreaking havoc with the sample rate of Soundtrack Pro. I'm not making this up. The solution was to go buy a Toslink optical cable and plug it into both ports creating a loop. The sample rate clock was jumping back and forth from 44.1 kHz to 48 kHz and causing the popping when playing anything in Soundtrack Pro. Problem has been solved. It didn't appear until I upgraded to Leopard, have no idea why, but I feel better now that it wasn't something I did that I couldn't figure out.
    Thanks to Apple Tech Support.

  • Firefox doesn't block chrome pop-up in macbook pro

    In my new Macbook pro firefox does not block the chrome pop-up advertisement on the google.com.au page.
    == This happened ==
    Every time Firefox opened
    == When I moved from a windows laptop to a Mac one.

    The malware software suggested in the previous reply is for windows only not for Macs. My problem is the chrome pop-up advert in google.com.au is NOT being blocked by firefox. I have no such problem with my windows computer!

  • Audio crackle/pop with new MacBook Pro under Vista

    I just got a brand new MacBook Pro (multi-touch, Penryn cpu) and have used Boot Camp to install Windows Vista on it. Vista installed fine, and then I used the Restore DVDs that came with my MBP to install the drivers. The Device Manager shows that everything is installed.
    All is not well, however. Whenever sound is being output, there are random crackles or pops - sometimes there will only be one every 5 minutes or so, sometimes there are 10 of them right in a row. The only clue I can find is that the Problem Reports And Solutions application in Vista says that there is a "Compatibility issue between Intel 82801GBM (ICH7-M) LPC Interface Controller - 27B9 and Windows Vista." There is no solution offered. I don't know if this problem is directly related to the audio problems, but it seems likely.
    Has anyone else encountered this? Any way to fix this and stop the audio crackles?

    Well after a week and a half of testing and being unsatisfied with choppy audio on my MBP I believe I may have found the answer. The cause lies in the audio API within Vista; there is a specific service (Multimedia Class Scheduler) that adjusts the priority of multimedia applications according to resources available and one of the factors that affects the prioritization is network usage.
    I tried pretty much every Broadcom driver available from HP and Dell to no avail; some reduced the frequency of the pops and crackles but none of them removed it completely.
    I believe the solution lies within several registry keys that control the Multimedia Class Scheduler service. Open up regedit and modify the following keys:
    HKEYLOCALMACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Multimedia\SystemProfile
    Set NetworkThrottlingIndex and SystemResponsiveness to 10 each (decimal)
    and
    HKEYLOCALMACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Multimedia\SystemProfile\Tasks\Audio
    Set SchedulingPriority to High.
    After changing these 2 keys I couldn't here any audible stutter regardless of whichever driver I used. I am currently using v1.96 for the Realtek and 4.170.77.3 for the Broadcom.

  • Missing characters in generated PDF - Adobe Acrobat 9 Pro

    PDF documents printed from Framemaker or Microsoft Word are missing characters. Usually the missing characters are after bold text or headings. If the text is underscored, the underscores are printed, but the text is not. When I have these source files printed to PDF by someone using Acrobat Distiller included with FrameMaker 7.2, all of the text is included.
    I apreciate any ideas yo may have.

    Install the following Microsoft Hotfix.
    http://support.microsoft.com/?id=952909

  • I spilled pop on my macbook pro, mostly on speakers and screen, however the macbook still works fine, should i contact them and ask what should i do or try to dry it off.....please help??

    Hi , i spilled sprite on my macbook pro mostly onto speakers but however, i dried it off immideately and the macbook is working fine so far. Speakers still work normal but i am worried thatere might be some problems later on. Please suggest me some good ideas to furhter mae sure that the mac is fine?

    I suggest that you take the MBP into an Apple store genius bar for a free evaluation.  There are liquid sensors inside and they should check if any have been activated.  This may give you a clue as to what you may expect regarding future reliability.
    Ciao.

  • XI Interface With CRM RFC

    I have a BAPI in CRM that I call from XI via RFC. In CRM, I want to be able to see what happens with the function; whether it fails, abends, etc. I have some strange things happen and am trying to trouble shoot the cause. From the XI side, all looks like it went well.

    Hi,
    What version of CRM are you using ?
    Try running transaction SPROXY in CRM and see if anything happens.
    If so, check under your namespace and see if you can see your interface defined. If you can then just right click on your interface to generate the required ABAP proxy.
    I have just finished a CRM/XI project and the majority of integration was done using ABAP proxies. Any functions that were called were inside the ABAP proxy instead of using the RFC adapter. It was far easier and quicker doing it this method instead.
    Only use IDOCs if the standard IDOC fits your requirement - otherwise do not bother.
    Cheers
    Colin.

  • SOAP - RFC scenario EOIO

    Hi,
    I have configured this scenario and am able to have it work fine from the runtime workbench but
    now I am trying to develop a web service client for it and am not sure how this will work.
    The scenario is ,  Netweaver CE calls web service (SOAP) in PI, PI calls RFC in ERP.
    I want the RFC to be called in EOIO so EOIO needs to be passed to PI when the soap service is called.
    How can you generate a client in netweaver CE that will call the web service with EOIO QOS flag ?
    Can you just set this flag somewhere ?
    Can other clients also call this web service with EOIO flag ?
    Thanks.

    Hi,
    I had a similar requirement(Best Effort) where i have used the below URL format to make the scenario work....The quality of service should be added at the end of the URL, with the "Use Query String " and "Use Encoded Headers " parameters being checked in your soap channel.
    The url to be used is -
    http://host:port/XISOAPAdapter/MessageServlet?senderParty=&senderService=abc&interface=xyz&receiverParty=&receiverService=&interfaceNamespace=http://abc.com/xi/testbox/admin&QualityOfService=BestEffort
    For EOIO - &QualityOfService=ExactlyOnceInOrder&QueueId=1234
    For EO - &QualityOfService=ExactlyOnce
    Regards,
    Swetha.

  • Step by Step Guide Details for RFC to File and File to RFC scenario

    Hi Guru's
    Good day to you. I am tyring to develop some scenarios based on RFC adaptor. so i want to start up with basic scenarios like RFC to File  scenario(Here i just want to pull some data from SAP using RFC and put it in destination folder as an text file) and FILE to RFC scenario (Here i just want to take some data from the file and update into SAP).
    For doing these scenarios i would like to request you people to send me the step by step guide which explains me about the complete steps of configurations required to do the RFC to FILE scenario and FILE to RFC scenario.
    I found some scenarios and i am in confused state. so i request you to please put your experience to help me out.
    thanks in advance.
    Regards
    Raj

    Hi Aaron,
    I don't know your scenario and your ECC and PI versions but I learned how to use ABAP Proxy more than 1 year ago with the following tutorial:
    Edit--> The forum doesn't allow me to post external link, just search "ABAP Proxy Communication Scenario" in google and visit the 1st result
    The way to develop ABAP Proxys has changed a little if your PI is 7.1. In the ECC side, the transaction SPROXY looks much better too if you have a recent version of the ECC.
    Edited by: Marshal on Oct 8, 2009 5:08 PM
    I've found that SDN Document. Maybe the scenario is not the most simple to start with ABAP Proxy but is very well documented and is for PI 7.1. The document also handles the inbound and outbound proxys
    [http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c00ca32e-f991-2b10-f5be-97114bd2b08f&overridelayout=true]
    Edited by: Marshal on Oct 8, 2009 5:22 PM

  • Separate Doc.Type for MRP generated PRs

    Dear All
    We are facing an issue with MRP process where we want to automate the process from MRP run to PO creation.
    In source list we will add the existing contracts and make it relevant to MRP so that after MRP run we will get source (vendor defined in the contract) assigned purchase requisitions. After that, we will create a background job for ME59n in order to get the POs automatically after MRP run.
    In this process we are facing issue with the auto PO generation through ME59n as funds management (FM) related parameters such as Fund and Fund center need to be enetered manually at the time of PO creation in our system. So in order to avoid this manual entry we want to define FM derivation which automatically populate the fund & fund center in the MRP generated PRs.
    Further, we have two options for FM derivation one is valuation class and the second one is Document type. If we define the FM derivation based on the valuation class we cannot only restrict to MRP generated PRs. Second option is separate document type for MRP generated PRs.
    Please provide pros and cons regarding the creation of new document type for MRP. Also, please provide your suggestions or any work arounds for the above discussed scenario. Your inputs are highly appreciated.
    Thanks in advance.
    Prabhas

    Hi nagaraj
    it makes sense . i will explore and tell you.
    what about your source assignment standard program. hope it will assign source of supply if it is a valid unique source of supply else it will assign eprofile to your purcase request. check with technical resource how the satndard program behaves.
    i will also explore my side again. check mm forum too on your purchase organisation assignment for your userexists.
    one question to you.
    when you create a PR for material and go to source of supply .why do we get many fixed vendors like contracts,info record if we have valid fixed vendors as sap ecc standard.but in my PR i may not have Purchase organisation information.
    muthu

  • File Soap Rfc

    In my scnario file soap rfc i have used BPM.Even though the file is not picking up & its not calling webservices.Basically my requirement is i need to send a file which has to call webservice and the response has to get back to rfc.i am tring to work on this weblogs
    /people/shabarish.vijayakumar/blog/2006/03/23/rfc--xi--webservice--a-complete-walkthrough-part-1
    /people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2
    I am able to get response for rfc to soap,but i want to work on a scenario file-soap-rfc and the response has to come to file.
    Can any one please help me out.
    Thanks
    sriram

    Thanks moorthy for your response
    I have already configured receiver determination from file to bpm,even i  bpm after sync step i have taken asyn
    step..
    In adapter Framework
    Channelscn8_OB Sender Adapter v2727 for Party '', Service 'DEV_Integration_Server':
    Configured at 2006-05-11 10:56:36 GMT-07:00
    History:
    - 2006-05-11 11:08:37 GMT-07:00: Polling interval started. Length: 60.000 s
    - 2006-05-11 11:08:37 GMT-07:00: Processing finished successfully
    - 2006-05-11 11:08:36 GMT-07:00: Processing started
    - 2006-05-11 11:07:37 GMT-07:00: Polling interval started. Length: 60.000 s
    - 2006-05-11 11:07:37 GMT-07:00: Processing finished successfully
    But the file is not picked from directory
    But i could not see any response from soap adapter,
    Thanks
    sriram

Maybe you are looking for