Pop port car charger

Hi,
I have a bluetooth handsfree kit (non nokia) for the car and would like to mount my phone (Nokia 6233) on the dashboard and have it charged whilst in the holder.
This can obviously be done using a Nokia car kit but I do not need the full car kit (I already have bluetooth kit) just the holder and a pop port cable which goes from the holder to a power source in the car. I would prefer this to be hard wired than having an adaptor in the cigarette lighter.
I have Nokia 6233 and would like to use the holder CR56.
Can someone tell me what cable I need and where I can buy it.
Thanks very much.
Matthew

All you need is an in-car charger lead, the cr-56 has a pop port connector and a charging connector on the bottom, us the same one as you would for your phone.
Danny b
Nokia Accredited Installer
If my answers help you, give me a Kudos. Its like a pat on the back.

Similar Messages

2-port car charger for iPhone5, do I use 1.0A or 2.1A?

I have an 'iHip powerful 2-port USB car charger' for iPhone5, do I use 1.0A or 2.1A socket?

Either. The phone decides how much current it will draw from the charger.

2.5mm / Pop Port Adaptor for Car Kit?

I currently have a Nokia Car Charger / Hands-free that my work installed, it has a power connector and a 2.5mm connector. I use it with a Nokia 1100 but I have upgraded to a Nokia 6100, however since the 1100 uses a 2.5mm connector and the 6100 uses some kind of Pop Port, it doesn't connect. I'm not sure of the brand of car kit since my wife is using the car, all I can remember is the name begins with 'A' but that's not much help. Anyway, if someone could suggest an appropriate product to use, that would be very helpful.
William.

The only car kit i can think of who supplies a cradle to fit the Nokia 1100 is THB Bury, if this is fitted into your car you will be able to replace the cradle, it simply clips off, expect to pay around £60. Let me know if you can see any names or part numbers.
Danny B
Nokia Accredited Installer
If my answers help you, give me a Kudos. Its like a pat on the back.

Is it safe to use the USB port in my car to charge my iPhone 5s or do I need to buy a car charger?

Is it safe to use the USB port in my car to charge my iPhone 5s or do I need to buy a car charger?

Check car manual to see if it supports charging ,some do not
or use a USB 12 volt plug in for the "cigarrette lighter" socket and plug into that ,probably a better solution

My iPhone 5 Bricked after plugging it into the USB port on my AT&T car charger

I plugged my factory USB cable from my iPhone 5 into the USB port on my AT&T car charger and it killed the iPhone 5 dead. I guess I thought since Apple is making a 30 pin converter and that all of my other apple products work this way that it should work...I guess I was wrong!

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Volume problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Can i use an old car charger with a usb port to charge my iPhone 5s?

Can I use an old car charger for a not smart phone to charge my iPhone 5s through the usb port?

Usually you can!
check if the specification of charger (USB output) is 5V (very important) and at least 500mA (more power like 1000mA --> 1A allow you to charge greater devices like iPad)
But personally is not good idea, because in short/long time can damage or reduce the life of battery of your iPhone/iPad etc.
Bye

J'ai le message "E_LIC_ALREADY_FULFILLED_BY_ANOTHER_USER" quand je tente d'utiliser digital etions pour télécharger mes ebook sur mon pc port. car cela ne fontionne plus sur mon pc Bureau ??????

j'ai le message "E_LIC_ALREADY_FULFILLED_BY_ANOTHER_USER" quand je tente d'utiliser digital etions pour télécharger mes ebook sur mon pc port. car cela ne fontionne plus sur mon pc Bureau ??????
je suis passé sur le portable car cela ne fonctionne plus sur le fixe
j'ai installé et utilisé la meme ID ADOBE
mais????????????

616 car kit and pop port

can i use a pop port with the 616 car kit

No, bluetooth only. look at ck-7w instead.
Danny b
Nokia Accredited Installer
If my answers help you, give me a Kudos. Its like a pat on the back.

CA-55 Pop-Port = any phone?

Hi
I know that there is a limited number of holders for Nokia phones that are compatible with the CA-55 converter cable. But is it possible to plug the CA-55 directly into any Pop-Port on any phone and get hand-free and charging functions (with the latest CARK-91 control boxes)? No cradle, just a Universal cradle. The information I have read is not clear on this.
I guess the phone needs a Hands-free mode?
The phone I am hoping to connect is the 7370 or 7373 which have Pop-Port.
regards
TT

the chances of these phones working with a car-k91 + ca-55 are very slim, it normally dose not support smartphones but there is such a grey area that its a gamble. I would buy a ck-7w and use as bluetooth connection only, thats the way the phone is designed to be used due to no specific cradle being available.
Danny b
Nokia Accredited Installer
If my answers help you, give me a Kudos. Its like a pat on the back.

Cark-91 and pop port adapter

Hi all, i have a cark-91 in my car which works fine but now i have a n73 so i purchased a pop port adapter, i read from other posts that a slight modifacation to the adapter and the n73 will fit,and the only draw back was that it might not charge which was ok by me.Now i have fitted pop port adapter with my n73 fitting it,the car symbol appears on the screen the phone is charging but i have no sound, do i need to activate something on my phone, i am currently using v3.0704.1.0.1 software, any help would be great.

hi Scoobyman,
when i go into enhancement in use it only gives me 3 options headset,loopset,and text phone.Below that then i have the headings headset,loopset,text phone,bluetooth handsfree,and car kit and if i go into anyone of these it gives me 3 more options default profile,automatic answer and lights but these dont change enhancement in use

N70, CR-27 & CK-7W via Pop port. Lights on?

Hi folks I use the N70 in a CR-27 cradle connected to the CK-7W by pop port. Unlike my previous Nokia phones this N70 does not offer a 'handsfree' option on the enhancements menu when placed either in the CR-27 cradle or directly onto the pop port. This means the 'lights on' option is not selectable for my cradled N70 as the menu is not available. The phone charges in the cradle & the N70 is succesfully used via the car speakers/mic.The firmware version was updated to the most recent available by a Nokia service centre last week. Can anyone assist me with how to achieve 'lights on' when the N70 is cradled. Any suggestions?

I also have got an N70 working in a car kit - with antenna connection using the CK7W and CA27 cable into pop-port style cradle with antenna coupler. I can't get the lights to stay on - even with a new profile. I have asked the Nokia support people and they say it isn't possible.

Pop Port Ignition sense pin

I have a BMW installed car kit for a Nokia 6230i, however I cannot get the ignition sense to work. I have enabled this in the nokia menu.
when I look at the carkit the only pins connected to the pop port are;
1- Vin
2 - Gnd
9 - mic-
10 - mic+
Please can someone explain what pin should be connected to enable ignition sense and what voltage should be applied Vcc or GND? If I can find out I will be able to modify the BMW part.
I have looked up the pin out of the pop port but can't tell how the ignition sense works.
1 - Vin - Charger input
2- GND - Charger output
3 - ACI - Auto-connect Ignition
4 - Vout -
5 - USB Vbus - Also act as USB power detection?
6 - Fbus Rx/USB D+
8 - GND - Data GND (Logic)
9 - VMic- - Audio IN - Ext. Mic input negative
10 - VMic+ - Audio IN - Ext. Mic input positive
11 - Hs Ear L- - Audio Out - Ext. audio out: left-negative
12 - Hs Ear L+ - Audio Out - Ext. audio out: left-positive
13 - Hs Ear R- - Audio Out - Ext. audio out: right-negative
14 - Hs Ear R+ - Audio Out - Ext. audio out: right-positive
* - GND - Shield GND in cavities
Thanks for your help..

It helps to understand the whole IGNS system.
If you set the ignition on in the phone´s menu it only means that the phone will sense the ignition status of the carkit and act accordingly, e.g. automatically switch off if the carkit feels ignition off and phone in idle etc.
So far so good.
The phone knows the ignition status of the carkit over ACI message. So this to connet is a must.
But - big question is what kind of BMW carkit you have and if this one is able to read and interprete ACI messages as this ACI is a proprietary interface and only Nokia carkits use it as far as I know.
Any more information available ?

Can I use my standard car charger i got for iphone 4 with iPhone 5? if I just plug in the usb to lightning cable or will it damage the new iphone?

The charger takes a usb cable, so I figure I could just plug in my usb to lightning cable and charge using my Saitek charger. Does anyone know if this works?

Did you get this to work? Mine did not work when I plugged it into my at&t iphone car charger usb port.

IPod Car Charger - not charging

I have a car charger made by Alpine that when plugged into my 5th gen iPod would connect it to my radio allowing me to play my tunes through my radio and it would also charge up my iPod. With my current iPod Classic, the charger/adapter does not charge up the iPod. Any reasons why this would not charge?

While I don't know if this is the actual reason or not, I can speculate.
Many USB devices can charge by just applying the power and ground pins of the USB port, so +5V and GND only need to be connected on the USB connector. However SOME USB devices are designed so that the two data lines also have to be hooked up. No data comes had to come across them, but the two lines need to be "active" in that they have a voltage on them (typically 2.5V) for the device to then charge off the power pins.
Many USB charging devices, if they are not moving data, like ciggy lighter chargers, Wall AC chargers, etc. only hook up the power and GND pins and leave the data pins completely disconnected.
It would appear the Classic, the Video Nano, the iTouch & the iPhone are different than previous iPods in that it may need to have the data pins "active" to charge. If you look at some of the chargers available from the Apple store, you will find that many will work with Minis, 1st and 2nd gen Nanos, 5th generation, 4th gen, etc. but NOT the 3rd gen Nano, iPhone/iTouch, or Classic while others will list all of them.
Again, I don't know this for sure as I don't have any of the new products so can not test it, but I am guessing that is what the problem is. You might try contacting Alpine and see if they have any sort of fix for the issue, like a patch cord or replacement connector or something.
Patrick

IPod mini only works with car charger!

My iPod mini only works when it is plugged into a car charger. It is 4 months old. It does not work (frozen - no response or display at all) on its own, or plugged into the AC charger, or the USB connection on the computer. I have tried the reset procedure several times and with different power connections with no results. The iPod seems perfectly fine when using a car charger otherwise nothing! Whats going on!!?!?!
Anyone else with this problem??

Try to reset it.
Press and hold the MENU and CENTER buttons - at the same time - until you see the Apple logo. This should take about 6 seconds. Also, you want to do this procedure while your iPod is connected to your computer. Ipods are supposed to work with USB port cable and AC Adapters, not only car chargers.
If this doesn't work, then try to update it using iPod Updater software. Open iPod Update, plug in your iPod to your computer and wait until the software recognizes it. Once it does, you should be able to click on the "Update" button. If you can't, click "Restore"

Pop port car charger

Similar Messages

Maybe you are looking for