PoP Port Connector Issues

I seem to have a dodgie pop-port on my phone or dodgie cables?
I wiggle the pc cable and that causes it to disconnect from the pc and phone yet its still in the socket and the headset sometimes if i wiggle it, the sound cuts out..
Can I take this to a Nokia shop to get it fixed under warranty or do I have to RMA it back to Expansys?
Regards,
Andy
Owned: Nokia 3510i, Nokia 3120, Nokia 6230i, Nokia 6233, Nokia N73, Nokia N82.
Current: Nokia N900!

26-Aug-2007 07:25 PM
tehrules wrote:
I seem to have a dodgie pop-port on my phone or dodgie cables?
I wiggle the pc cable and that causes it to disconnect from the pc and phone yet its still in the socket and the headset sometimes if i wiggle it, the sound cuts out..
Yes, Nokia's pop-port wasn't their best invention. I had similar problems with my 6280 and I've heard countless other people with similar issues.
What I used to do always was to blow on the handset's connector in order to dislodge any dust particles, and then wipe the contacts on the headphone or USB cable with a soft cloth in order to get rid of dust/grease/etc. Then annd only then did I get a relatively stable connection.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

Pop port car charger

Hi,
I have a bluetooth handsfree kit (non nokia) for the car and would like to mount my phone (Nokia 6233) on the dashboard and have it charged whilst in the holder.
This can obviously be done using a Nokia car kit but I do not need the full car kit (I already have bluetooth kit) just the holder and a pop port cable which goes from the holder to a power source in the car. I would prefer this to be hard wired than having an adaptor in the cigarette lighter.
I have Nokia 6233 and would like to use the holder CR56.
Can someone tell me what cable I need and where I can buy it.
Thanks very much.
Matthew

All you need is an in-car charger lead, the cr-56 has a pop port connector and a charging connector on the bottom, us the same one as you would for your phone.
Danny b
Nokia Accredited Installer
If my answers help you, give me a Kudos. Its like a pat on the back.

2.5mm / Pop Port Adaptor for Car Kit?

I currently have a Nokia Car Charger / Hands-free that my work installed, it has a power connector and a 2.5mm connector. I use it with a Nokia 1100 but I have upgraded to a Nokia 6100, however since the 1100 uses a 2.5mm connector and the 6100 uses some kind of Pop Port, it doesn't connect. I'm not sure of the brand of car kit since my wife is using the car, all I can remember is the name begins with 'A' but that's not much help. Anyway, if someone could suggest an appropriate product to use, that would be very helpful.
William.

The only car kit i can think of who supplies a cradle to fit the Nokia 1100 is THB Bury, if this is fitted into your car you will be able to replace the cradle, it simply clips off, expect to pay around £60. Let me know if you can see any names or part numbers.
Danny B
Nokia Accredited Installer
If my answers help you, give me a Kudos. Its like a pat on the back.

OS 10.4.10 Update Causing Audio Popping (AND HUM) Issues:

OS 10.4.10 Update Causing Audio Popping (AND HUM) Issues:
The problem on my Intel Mac mini with external Klipsch speakers (two mid-range/high and a subwoofer) is REAL obvious as the system emits a hum like a Spinal Tap amplifier turned up to #11 when 10.4.10 powers down the audio circuitry
Then, if I play a song in iTunes, it first pops and the hum disappears right before playing.
Quite annoying. I restored the mini from a recent backup to 10.4.9. Problem gone.
I'm glad I test updates on the mini before applying them to my Intel iMac 24. I guess I'll just hide & watch what happens before doing any more updates.
Here's what I sent to Apple tech support:
Guys/Gals (OS X Engineers):
Concerning the Snap, Crackle Pop Audio problem in the 10.4.10 update:
Please. Just do the right thing and fix the audio.
There is no need to power cycle the audio subsystem to save .0005 amps on the laptop line.
And then to make your Mac mini/iMac/other desktop users have to put up with it when using AC power is ridiculous.
Put the audio subsystem back like it was in 10.4.9 and let the laptop battery freaks looking for mini-amp savings get a "work-a-round".
Crikey!
iMac 2.16 Ghz Intel Core 2 Duo 2GB RAM Mac OS X (10.4.9) 20 Years of Microsoft-Induced Grey Hair
Mac Mini 1.83 Ghz Intel Core Duo 1GB RAM Mac OS X (10.4.9) 20 Years of Microsoft-Induced Grey Hair

Libby,
Backup is unable to make a restorable by Disk Utility backup. You can restore pieces of the software as outlined in my FAQ about backing up user data:
http://www.macmaps.com/backup.html
But to be able to restore a backup with Disk Utility, you need a cloning utility to have made the backup.
I suggest starting a new thread here, where someone else could help you out better:
http://discussions.apple.com/forum.jspa?forumID=752&start=0
First off, you'll get a wider audience who may be able to solve your problem. Secondly, responses to you won't confuse the original poster with solutions that don't apply to them. And thirdly, you'll know for certain whether or not a response applies to you.

Home Hub 3 Port Forwarding Issue - Question to BT

Question to BT
Hello i have recently joined BT Infinity and have hit the issue of the Port Forwarding not working. My HH3 is on the following version of software. Will this version automatically upgrade to the latest version of firmware and will this fix my port forwarding issue?
As i work in IT (Cisco Network Eng) i need to be able to access several devices/services at home and this is a real pain for me. If you think that this could drag on as some posts have indicated could you please let me know and i will either get a draytek or throw in a cisco 1841.
Thank you
Dean.
Current firmware:
V100R001C01B031SP09_L_B
Last updated:
Unknown

requiem wrote:
Question to BT
Hello i have recently joined BT Infinity and have hit the issue of the Port Forwarding not working. My HH3 is on the following version of software. Will this version automatically upgrade to the latest version of firmware and will this fix my port forwarding issue?.........
Thank you
Dean.
Current firmware:
V100R001C01B031SP09_L_B
Last updated:
Unknown
Hi Dean
By the look of it you've got the type B version of the HH3 with current firmware.
From http://bt.custhelp.com/app/answers/detail/a_id/13073
The latest versions of the firmware are:
BT Home Hub 3 – Software version 4.7.5.1.83.8.57.1.3 (Type A) or V100R001C01B031SP09_L_B
Please Click On any Text in Blue as that automatically links to information.
PC (NDEGR)

Ipod doesn't work on speakers but headphones are fine and speaker works with iPhone. Possible connector issue? Any thoughts on how I can get the fixed?

ipod doesn't work on speakers but headphones are fine and speaker works with iPhone. Possible connector issue? Any thoughts on how I can get the fixed?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Quantum Gateway Port Forwarding issues

This post can be removed.... the port forwarding worked once I set it up under "Advanced Settings -> Network Settings ->Port Forwarding" instead of "Firewall -> Port Forwarding"
Hello,
I am having an issue setting up port forwarding. I have made several attempts to make port forward TCP 8096, but it continues not to work. I had it working with no problems at my with my old router before we moved so I know it's not an issue with my computer firewall or antivirus and MediaBrowser is working fine on the local network. Is anyone else experiencing Port Forwarding issues? Also when will DMZ be enabled on this gateway?
Any help would be apprciated. I'm trying to setup MediaBrowser so I can schedule recordings when i'm not at home.
Thanks!
Armyb77
This post can be removed

See kayster contribution here.
SYNOLOGY DS214 - Remote access via BT Home Hub
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Adc display port to mini port connector

Anybody knows where can buy a ADC round side shaped display female port to new Macbook pro mini port connector?

I know monoprice sells mDP to DP cables if that's what you mean?

Cat 3750-Span (Port Mirroring issue)

Hello team
I am facing port mirroring issue in my setup. Details of the setup are mentioned below
Setup--
Stack of 4 catalyst switches WS-C3750X-48P running software 15.0(1) SE3 .Approximately 12 vlans are configured in this setup and port mirroring is done for all vlans with destination configured as single Gig Ethernet port...The setup works fine from mirroring perspective for 3-4 days and after that machine connected to destination port stops getting data.
Observations-
It has been observed that during the issue, the port configured for mirror destination has lot of packet drop/input errors on the port statistics.
If we configure only TX packet mirroring, it works for 8 -10 days
If we configure TX & RX packet mirroring, it works for 2-3 days
Testing done
Tried clearing counter on destination port but no success (mirroring doesn’t start)
Tried shut /no shut for the destination port but no success.
Tried restarting the machine connected to destination port but no success
Workaround
We need to reconfigure the mirroring configuration after removing the mirroring config from the switch. Once the same is done, mirroring starts working.
Want to understand
1-is there any HW limitation for the switch (destination port not capable of handling mirroring traffic)
2-is there any software related issue?
3-what can be permanent resolution for the same..

Hello
We have tried this previously but found same result.
1- we deleted the monitror session and recreated again with same session number
2-we deleted the monitor session and created new session (session id diffrent ) with same config..
in both cases its working for 3-4 days..

Post Moved Mac Port Forwarding Issues

Post Moved to Other BB Queries http://community.bt.com/t5/Other-BB-Queries/Mac-Port-Forwarding-issues/td-p/550779
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Does this help...?
http://community.bt.com/t5/Other-BB-Queries/Port-forwarding-and-Loopback-DO-work-YMMV/m-p/538328

OC4J port binding issue

This thread is in OC4J/J2EE forum, but it feels like it could be an Redhat AS2.1 port handling issue, so I'm copying here...
I'm having some problems with OC4J standalone. Starting and stopping OC4J gives error:
"Error starting HTTP-Server: Address already in use"
and sometimes "Error starting ORMI-Server. Unable to bind socket: Address already in use
and almost always "Error starting JMS-Server: Unable to bind socket: Address already in use
Starting and stopping a few times usually results in a successful restart, but this is intermittent success and not predictable. Reallocating with a different port numbers means successful start fist time, but then it follows the same pattern.
This is OC4J standalone 9.0.3 pure java deployed on Linux RHAS 2.1...
Java version is 1.3.1.1_02-b02
My start and stop scripts look like this :
startoc4j.csh
#!/bin/csh
java -Xmx100m -Xms100m -Dscm.logon=true -jar oc4j.jar -userThreads &
stopoc4j.csh
#!/bin/csh
java -jar admin.jar ormi://localhost:50501 admin ias_admin1 -shutdown
Has anyone seen this before? Is there a standard start / stop script for OC4J standalone on UNIX that I can use?
Thanks,
Mark

This was found to be a JRE on Linux bug. Solution was to upgrade to Javasoft 1.4.1...

Pop port that supports a mic

Does anybody know if there is a pop port that supports a mic like the shure mpa? http://www.amazon.co.uk/SHURE-MPA-Adapter-for-iPhone/dp/B000UD205K
It's for my E61i.
Cheers
David

you can use single job server for exectuing jobs and managing Adapter communication, the same job server will be executing the jobs and handling communication to and from Adapter
you don't need a dedicated Access Server for JMS, you can use the same Access Server

How to open computer hp 2000 to fix loose usb port connector?

how to open computer hp 2000 to fix loose usb port connector?

Here is the Manual:
Manual
The usb ports on the right, next to the power jack, are on a daughterboard and fairly easily replaceable but the left usb port next to the HDMI is on the motherboard. The only way to repair it is to resolder it to the motherboard. Good luck.
If this is "the Answer" please click "Accept as Solution" to help others find it.

CK-7W Bluetooth with Pop Port being used

I have the CK-7W (without the cradle) and an N93.
Everything works great with it except when I have a FM Transmitter connected to the Pop Port so I can play MP3's from the N93.
My problem in this scenario is as follows - A call comes in and the sound is routed to the radio via the transmitter. I have to disconnect the transmitter from the Pop Port. The phone then returns to the General Profile, not the Car Kit profile. So, I then have to try to activate the Car Kit Profile (either from the phone itself or by a single push of the 7W button). Then I have to press the button again to answer the call.
By the time I have done all this the call is usually long gone.
Anyone else have this problem? Any way to set it up so that it reverts to the Car Kit profile automatically when a call comes in (ideally!!) or at least when you disconnect the transmitter?
Any help would be much appreciated.

Is that the old holder from an old carkit? I've always thought that the CK-7W was built to be wireless and that the phone doesn't have to be physically connected.

CA-55 Pop-Port = any phone?

Hi
I know that there is a limited number of holders for Nokia phones that are compatible with the CA-55 converter cable. But is it possible to plug the CA-55 directly into any Pop-Port on any phone and get hand-free and charging functions (with the latest CARK-91 control boxes)? No cradle, just a Universal cradle. The information I have read is not clear on this.
I guess the phone needs a Hands-free mode?
The phone I am hoping to connect is the 7370 or 7373 which have Pop-Port.
regards
TT

the chances of these phones working with a car-k91 + ca-55 are very slim, it normally dose not support smartphones but there is such a grey area that its a gamble. I would buy a ck-7w and use as bluetooth connection only, thats the way the phone is designed to be used due to no specific cradle being available.
Danny b
Nokia Accredited Installer
If my answers help you, give me a Kudos. Its like a pat on the back.

PoP Port Connector Issues

Similar Messages

Maybe you are looking for