Pop sound on youtube
When i play videos on youtube using safari and when I skip to a part thats not been buffered yet, i hear a sharp deep pop sound. This only happens on safari.
Tried safari and moving the slider to advance the video but I coudn't reproduce your problem.
Similar Messages
-
Crackling and popping sound when playing music and watching youtube videos
there is a crackling and popping sound when i watch videos on youtube or play music/videos using vlc media player and windows media player. recently it has gotten to a point where it happens when windows is starting up or even when the laptop is required to play a sound for example when i plug in a removeable hardware such as thumbdrives
Hi @donnabail ,
Thank you for visiting the HP Support Forums and Welcome. I have read about your HP 2000 Notebook and getting a buzzing or popping sound while playing music and watching Youtube videos. Try performing a hard reset.
When performing a hard reset please note remove any and all USB devices. Disconnect all non-essential devices.
You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook that might have caused this.
You can try this
1. Right click the Speaker icon in the bottom right corner.
2. Click Playback Devices.
3. Click Speakers.
4. Click properties.
5. Click the advanced tab on the Properties window.
6. Change the Default Format drop-down to the highest quality.
7. Apply the properties.
8. Click OK to close the properties window.
What happens if you right click on the video while playing a video and take the check out of hardware acceleration. Shut the browser down and restart the notebook.
Have you checked for an update on the Active X.
Please let me know how this goes.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
Running the newest version of FF, Windows XP. Everything was working beautifully until I downloaded the ActiveX plugin when prompted a few days ago. Then the sound on YouTube got borked--I can see the videos just fine, but no sound at all.
I've tried uninstalling and reinstalling Flash, the Active X plugin, and Shockwave, to no avail. Can someone explain suggestions to someone who is in no way a computer person? Thank you!Hello, I am not familiar with FF, using IE6. But what caught my eye is you said you downloaded the active x plugin "when prompted"
That is how I came to know there even was a F.P.10 update, a window popped up and said it was availabe and did I want to install now,
later or remind me later. I said, sure, install now. LOL I have since resolved my problem.
I know on the Adobe site, there is a download and install for Windows and one for FF. Do you think the "prompt" installed on IE? I wouldn't think so, but it's a thought. I know you can switch back and forth from FF to IE
Also it might be a good idea to go to www.adobe.com/software/flash/about and Adobe will tell you if you have installed F.P. & they will tell you the version as well.
Like I said, not familiar with FF, but with IE, I had to go into manage add ons & update the active x of Shockwave Flash & Reboot. -
Static, Crackles, and Pop Sounds
I have a Sound Blaster PCI Express X-Fi Xtreme Audio sound card?(.04.0000 Drivers) and it makes crackles and pop sounds when:
- I'm watching a video online in fullscreen (for example: Youtube, Gamespot, IGN)
- When I'm watching any video in fullscreen on Windows Media Player
- When playing a certain DVD or CD rom (for example, a movie or a music cd) the sound will go all static
- The sound will also crackle and pop in other programs when a movie or music DVD/CD is in my dri've, but not in use
- Certain games are unplayable because of all the static sound (for example: Starcraft)
- When I play?Street Fighter IV and Battlefield Heroes, I don't experience crackling or popping, but rather?poor sound quality (it's like sound coming from very bad?speakers with no bass).
My specs are:
Windows XP Professional SP3
Intel Core i7 @ 2.67Ghz
3 GB DDR3 Ram
HIS Radeon HD 4870 52 MB
Asus P6T Delxue Motherboard
I have disabled EAX Effects, X-Fi CMSS-3D, and X-Fi Crystalizer in the Creative Console. The sound card is currently in my PCIe x6 slot. I have tried putting it in my PCIe x4 Slot, but I get the same problems. Also, when I plug in my mic, it does not work! Why is that? and how can I get rid of these crackles, pops, and static noises?Turns out I'm not very familiar with the Xtreme Audio cards which I'm pretty sure don't have an X-Fi chip, just some X-Fi algorithms in software. I'm not sure how much help I can provide. Have you tried CL Support?
What are you using for speakers?
If you get complete static, that could be attempting to send an encoded track like Dolby Digital, DTS, DTS CD Audio, to analog speakers. That would be a matter of making sure the player software settings are correct.
-Dave
?[email protected] -
Audio Jack Makes fuzzy static popping sounds
So whenever I watch youtube/netflix, i plug in my earphones in the audio jack. I've realized whenever im watching netflix or listening to music, there's a fuzzy popping type sound. Its not the earphones because ive used different ones. Can somebody help me please!?
Hello @magicmikeeeeeew,
I have read your post on how your headphones make a fuzzy / popping sound when watching netflix and youtube on your notebook, and I would be happy to help you!
For further assistance, I will need to know:
If the same sound can be heard from your notebook's speakers.
If the same sound can be heard from playing a video or music file from Windows Media Player.
The Product and Model Number of your notebook computer.
The version of Windows you have installed on your computer.
If your computer has completed all of its important Windows Updates.
If you have updated your HP drivers using the HP Support Assistant.
If this is an on-going, or recent issue.
Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
Iphone 6 screen popping sounds
My screen on my iPhone 6 makes popping sounds when I touch it. How can I fix this?
It sounds like this: http://m.youtube.com/watch?v=fSu3uU4OuIA
-
Has anyone experienced a popping sound coming from their speakers after the upgrade to 10.8.5?
Has anyone experienced a popping sound coming from their speakers after upgrading to 10.8.5? If you play something with sound (like iTunes or YouTube video) it goes away but then appears again after you wake up your computer from sleep.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/Audio/com.apple.audio.SystemSettings.plist
Right-click or control-click the line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item selected. Move the selected file to the Trash. You may be prompted for your administrator password.
Reboot and recreate your settings in the Sound preference pane.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return. -
My Imac has recently started to present annoyng popping sounds whenever i listen to anything: from a track in itunes to a video in youtube. It's totally random. It usually presents itself after I'm hearing to something for about 30 minutes. After that it will become non-stop unless I myself stop the playback.
This is very annoying and I can't find a solution even if I've found precedents treads about similar problems.I dont have an advice but I'd like to share a problem of mine. I am experiencing a continuous sound/hum sort of noise from my 20" ACD. I checked the power adapter and did a lot of troubleshooting (almost same as you did) but nothing happened. The sound is pretty much consistent. But you know, when I switch off my display during normal operation the sound vanishes. Tried this a hundred tiimes and finally confirmed that yes, its probably the inverter board inside the LCD panel which normally produces 2000Volts and sometimes produces popping or consistent sounds. So the only advice is, get rid of it.
-
No Audio, External speakers popping sound. Help Please!
Apple iMac "Core i5" 2.5 21.5-Inch (Mid-2011)
OS X 10.6.8
Having trouble with the audio on my iMac. AppleCare is not an option. This system made a few stops between a non-tech literate PO and myself so I have no history for before the symptoms presented.
Problem Summary:
No sound from internal speakers at any time.
No standard audio from external speakers.
Constant high frequency popping sound from external speakers when hooked up.
External speakers known and tested good on another system.
Details:
Popping sound starts immediatly after startup.
No startup sound with either internal or external speakers.
Tried iTunes and YouTube video played on Safari without success.
In OS onscreen volume control looks and responds normally to volume adjust action.
Popping sound on external speakers volume does not change with in OS volume adjustment.
'Internal Speakers' NOT listed in SYS PREF> SOUND> Output Tab ( 'Headphones' is listed ).
SLEEP MODE stops popping sound, popping sound restarts with computer but at slower frequency for a few seconds.
Actions tried:
Checked and cycled mute options in APPS> SYS PREF> SOUND & APPS> UTILITIES> AUDIO MIDI SETUP.
Quit process 'coreaudiod' in APPS> ACTIVITY MONITOR. * see note below
Checked that no light visible inside external audio jack.
Reset NVRAM / PRAM process http://support.apple.com/kb/HT1379
Rest System Management Controller http://support.apple.com/kb/HT3964
Shutdown / Restart with ALL devices unplugged.
Extra Info:
Apple USB keyboard w/10 key
Logitech Wheel Mouse
'Sample' taken from 'coreaudiod' in ACTIVITY MONITOR
Analysis of sampling coreaudiod (pid 242) every 1 millisecond
Call graph:
2759 Thread_3183 DispatchQueue_1: com.apple.main-thread (serial)
2759 0x1000016a4
2759 0x1000071e0
2759 CFRunLoopRunSpecific
2759 __CFRunLoopRun
2759 mach_msg
2759 mach_msg_trap
2759 Thread_3184 DispatchQueue_2: com.apple.libdispatch-manager (serial)
2759 start_wqthread
2759 _pthread_wqthread
2759 _dispatch_worker_thread2
2759 _dispatch_queue_invoke
2759 _dispatch_mgr_invoke
2759 kevent
2759 Thread_3186
2759 thread_start
2759 _pthread_start
2759 CAPThread::Entry(CAPThread*)
2759 HALRunLoop::OwnThread(void*)
2759 CFRunLoopRunSpecific
2759 __CFRunLoopRun
2759 mach_msg
2759 mach_msg_trap
Total number in stack (recursive counted multiple, when >=5):
Sort by top of stack, same collapsed (when >= 5):
mach_msg_trap 5518
kevent 2759Have also done an Apple Hardware test. Both levels. Reports there are no problems.
-
So in the last few days I’ve noticed that pressing my volume change keys actually isn’t changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squares go up or down. I mute it but my computer still makes sound. It’s the same with the volume control up the top of the screen, too. I slide it up and down and it doesn’t change the volume at all. The only way I can change the volume is with my speakers or the program I’m in (iTunes, VLC etc). I restarted and it seems to be okay then I go to change it a couple minutes later and it’s back to not working again.
I’ve checked my settings- the “use all F1, F2, etc. keys as standard fuction keys” is not switched on, and I have tried a suggestion of moving the com.apple.systempreferences.plist file out of the library and onto the desktop and restarting and neither of those seem to make any difference whatsoever. I’ve tried to find online forums but the only suggestions I found were those two and they didn’t work.
I’m just annoyed because I usually have the worst luck with technology but my macbook had been going strong and I got it because of the apparent lack of things that could go wrong, but of course even if there is one thing that could go wrong it will happen to me.
Please help!You migh give resetting your NVRAM a try:
http://support.apple.com/kb/ht1379 -
I've never had an issue with my sound on my MBP 15" 2011 model until I upgraded to Mavericks. Shortly after I upgraded, I started getting a 'popping' sound coming from the speakers even with the volume muted.
I'm trying to figure out what could be causing it by eliminating running programs but no luck yet. So far I've tried:
disabling graphic switching
disabling the Flash plug in for Chrome
Checking Voice over settings in accessibility (off)
Killing coreaudiod
So far, only killing coreaudiod has worked for any length of time.
I'm not playing a sound, I have nothing in the background that's generating sound (with the exception of MS Office 2013 running in Parallels generating meeting notification alerts - that seems to cause part of it) but something is obviously triggering it.
Thoughts? Comments? Suggestions?Might be corrupted audio preferences ..
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following;
/Library/Preferences/Audio
Click Go then move both .plist files from the Audio folder to the Trash.
com.apple.audioDeviceSettings.pllist
com.apple.audio.SystemSettings.plist
Restart your Mac. See if that made a difference ... -
My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested. How can there be audio issue for all these devices at the same time?
As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
Peace,
P. Dreadie -
My current project is like many I have created in the past. I have removed the sound from my video clips and laid another soundtrack under the entire project. Now, when I add an iphoto still image to the project, when it goes back into video there is a popping sound. I've never had this happen in the past and have made many projects in the past just like this one. Any way to troubleshoot this issue? Thanks so much for your help.
BenWhat audio output are you using? What mac and version iMovie
-
A Single POP Sound from Left speaker, after system heavy load.
Hello From Russia)) I bought Brand New Macbook pro 15" Late 2011 Ci7, this is incredible machine. But a month past and i started to notice a very strange behavior:
When i using mac for resource "Eating" application or processes my computer starts to Heat-this is normal.
When i close all the apps here starts interesting) I have Istat installed, so i can see what temps are in my system. Computer is cooling, and when cpu reaches 50-55 degrees (Celsium, from 80 degrees, because of heavy load) ,my left speaker produces a single loud pop sound. (like something turning of may be)
In other terms of use absolutely is fine! It is very strange and i dont know is normal or not(
Thank you very much, and sorry for my english.That is not something I would expect. I would go to a repair facility and have it checked.
Ciao. -
Suddenly No Sound on YouTube Videos
In the last couple of weeks, I suddenly have no sound on YouTube Videos and a few other Interent sites. I still have sound for some sites such as Ted.com and sound for local and previously downloaded videos so I know my sound card works. I've double checked the sound volumes in Preferences and have tried restarting the computer. Any suggestions?
Unmute the speaker icon
Maybe you are looking for
-
Document transfer from SRM to DMS through content server
Hi Everybody, In one of scenarios we need to transfer documents attached to the shopping cart line items in SRM to R/3. For that we followed the following procedure. 1.In the SRM to R/3 system, the attachments are driven by the
-
How to render out clips in your composition as indivual files?
Hi guys, I feel dumb! This must be possible, but I searched all over and can't find a way to do it. I have a MASSIVE amount of clips, that all requires the same post production. So, instead of having a new composition for every single clip, I figured
-
How do i switch where my videos are?
When i uploaded my music video to my itunes..it automatically shows up under movies..how do i change it to go up under music video?
-
hi all my data in Arabic language and report running ok in paper layout just when i running on web not return any data my report give it name of author and return details i wont how to do this action (Remove the LANGUAGE argument string from the com
-
Getting error "this serial number is not valid for Premier Elements 12"
My old computer crashed big time and I'm trying to install Elements 12 on a new computer. Installed ok and when trying to register it, I'm getting the error message "This serial number is not valid for Premier Elements 12." Didn't install Premier E