Pop-up an error message while executing in foreground
Hi,
I have a requirement from my client, they want an error message while they are trying to executing the program in foreground. The main reason for this it does not create a spool while executing the program in foreground, it creates only in background.
Is there any way of doing this?
Any sort of ideas is highly appreciated.
Thanks,
Srini
Check with your ABAP technical memeber. He should be able to add the error message to the porgram
Similar Messages
-
Receiving the error message while executing the Real Time DTP
Hi,
I am receiving the error message while executing the Real time DTP for Billing data.
Error Message - Record filtered in advance as error records with the same key exist RSM2 722
When I check the logs below is the message I am able to see. Can someone suggest as how to proceed further.
Diagnosis
The existing DTP requires a serialized update because fields are updated
non-commutatively during the processing run (for example, MOVE).
Therefore all new data records that have the same semantic key as
incorrect records that have not yet been corrected in earlier requests
or earlier data packages of the same request, are filtered out after the
extraction in a special step. In this way the system ensures that
incorrect data records are not repeated for your changes, which may not
contain errors themselves.
System Response
The data record is not updated but is written to an error stack.
Procedure
Procedure
Correct all incorrect data records and update them using an error DTP.
Procedure for System Administration
I checked the error stack and corrected the entries and let me know as how to proceed further. I am unable to execute the Error DTP as its not allowing me to edit and has only display options.
Regards,
RamHi Arvindh,
Its write optimized DSO.. there is no option to generate SIDs.
Hi Kiran,
I checked the link u sent me. Here the main issue is..The function module is standard and its not allowing me to do enhancement point..
Any idea in using Badi's??
Thanks all... -
Ds4 can't save files. Error message: while executing onload in_opOpen.htm
All of a sudden I'm getting this error message. I can view files and create files but can no longer save files.
If I try to save a file, I get the following message:
Full text of message: While executing onLoad in_opOpen.htm, the following Javascript error(s) occurred: In file "_opOpen": onOpen is not defined
If I click ok in the alert,
The following translators were not loaded due to errors:
ASP.html has configuration information that is invalid.
Data.htm: has configuration information that is invalid.
ICERegionals.htm has configuration information that is invalid
Not sure how these were corrupted. How do I fix this problem? The resolutions I've found on line are not working.An example: delete the file called ‘WinFileCache-[random numbers].dat’.. That did not work. I'm using Windows 7 Professional.If you've already tried clearing the cache file and personal config folder: Deleting a corrupted cache file
A good next step would be restoring preferences: Restore preferences | Dreamweaver CS4, CS5, CS5.5, CS6
Here are some other troubleshooting steps: http://helpx.adobe.com/dreamweaver/kb/troubleshoot-javascript-errors-dreamweaver-cs4.html
If nothing works, a clean reinstall will probably do the trick: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 -
Error message while executing international payroll with schema x000
Dear Team,
I am getting the below error message while running international payroll with schema x000.
"Jump from DAYPR to detailed log
Incorrect generation of wage types"
Request forum members to help me on the same.
Thank you,
SrinivasHi,
Thank you for the reply please find below i reviewed all the below tables please gothrough and advice me if any i missed out.
1) T555E-Message Descriptions----
2) T551C-Period work schedule evaluation---
Grpg Period ws Description Start Date End Date Cntg Class
01 PWTC Period WS 01.01.1990 31.12.9999 1
3) V_551C_B-Valuation class for Periodic work schedule
Grpg Period ws Description start Date End Date Val.Classfor PWS
01 PWTC Period WS 01.01.1990 31.12.9999 1
4) V_t508A-Work schedule rule
ESG ES grpg for ws Holiday Text PSG WSrule St Date End Date
2 Salaried Employee TCD TC 01 TCWR 01.01.1900 31.12.9999
5) V_001P_H-Personnel Subarea grouping for Time Recording
Personnel area Personnel Area Text Personnel Subarea Pers.Subarea Ps Group
1100 JEDDAH 1110 MAIN OFFICE 01
6) V_T555Z- Time type Determination
Can you advice me on this what I need to maintain here
7) V_T510S-Time wage type selection rule
Tm.WT Dy Grpg No Wagetype Wage Type Long Text
54 01 001 1010 Basic Pay
Regards,
Srinivas -
Error message while executing a SWF File
Hi All,
Iam trying to execute a SWF file which has its actionscript
written in AS3. When i execute this, I am getting an error message
which is as follows
Verify Error 1030# Stack Depth unbalanced 1 != 0.
Can anyone tell me what could be the root cause?
Thanks in advance,
Prabakaran Srinivasan.Hi All,
I am able to find the root cause for this. For AS 3 classes,
while parsing the ABC code, every method body will be a set of
instructions in which each instruction will have an offset to it.
This offset will be useful to mark the target for branching
instructions like if, while etc.... Because, these instructions
contains targetoffset as a parameter to which the instruction has
to jump when the condition becomes true or false. The process what
i am doing is i do some code injection to replace the URLRequest
calls. The flash file in which i got this error, i did replace the
URLRequest call to my own method call and this code was being
wrapped up by an IF block. Because of the code injection, i need to
update the offset of the instructions with the difference offset
value. I did this, but i missed the jumpoffset parameter of the if
block wrapping my injected code which was the root cause. I did fix
this...
Thanks,
Prabakaran Srinivasan. -
Error messages while executing File - RFC - File.
Hi,
I am doing a File - RFC - File scenario from Raj's blog.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file-rfc-file%2528without+bpm%2529&
I am getting series of error messages.
Someone please drive me in the right way. I am following each and every step in the same way mentioned there.
1. Everytime the file is picked up, i can see 3 messages in Moni. One from File - RFC. 2 messages from RFC - File. I changed the sender QOS with BE and EO and EOIO. but all the time it shows 3 messages. Why are 3 messages executing for this scenario? what should be QOS on the sender File CC?
2.. It throws a error message in response message for WS - RFC as .... RFC Adapter application error.
I re created CC, re imported RFC, searched for that erorr message in sdn and followed everything. no luck
3. Of the other 2 messages in MONI (RFC - WS), one of them shows error messageg as 2 and the other one shows a error message that Interface mapping does not exist in run time cache.
I re created IR objects again, I created MI for RFC which I dint do earlier, I re mapped, activated, did all cahce refreshes in SXI_Cache, CPA delta and full cache refresh.
But still it shows up the same error message.
Can you guys tell me whats bad going on with my scenario?
Appreciate your help,
Venkat.Hi Venkat,
From this line:
It throws a error message in response message for WS - RFC as .... RFC Adapter application error.
It seems there might be a problem in RFC Adapter. Can you see the error in Communication channel Monitoring what error it is showing. Probably the communication between PI and SAP might be a problem. If you put the error here, somebody might be able to help you out.
Regards,
---Satish -
Error Message while executing the Application
Hi,
I am new to Webdynpro and I created my first application by following some blog on a portal.I was able to activate my application successfully and when I executed I get this below error message.
I checked the cardinality and it is 0..1.My Inti.Lead Selection is set to NO.
I mappedthe nodes in my views also. But still i don't know whay am getting this error.
Note
The following error text was processed in the system RS2 : Adapter error in &VIEW_ELEMENT_TYPE& "VBELN" of view "Z_MYFIRST_WEBDYNPRO.MAIN": Context binding of property VALUE cannot be resolved: Node MAIN.1.NODE_VBAK does not contain any elements
The error occurred on the application server ucerp18_RS2_00 and in the work process 11 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE_FOR of program CX_WDR_ADAPTER_EXCEPTION======CP
Method: RAISE_BINDING_EXCEPTION of program CL_WDR_VIEW_ELEMENT_ADAPTER===CP
Method: GET_BOUND_ELEMENT of program CL_WDR_VIEW_ELEMENT_ADAPTER===CP
Thanks
KiranHi,
I changed the cardinality to 1:1 and I can see the selection screen. But, can you please explain why I should change this from 0:1 to 1:1.
Now I have a new error:
After I enter the sales order Number and hit my FIND button, am getting this error:
The following error text was processed in the system RS2 : Could not find attribute VBELN
Thanks,
Kiran
Now am getting a different error:
Invalid operand type for the MOVE-CORRESPONDING statement
Thanks
Kiran
Edited by: kiran dasari on Aug 20, 2009 10:54 PM -
*& Report ZAREPAS22
REPORT zarepas22 LINE-SIZE 250.
TABLES : vbak,vbap,likp,lips,vbrk,vbrp,kna1,vbfa.
DATA : ok_code LIKE sy-ucomm,
g_container TYPE scrfname VALUE 'BCALV8_GRID_DEMO_0100_VASU',
docking TYPE REF TO cl_gui_docking_container,
splitter_1 TYPE REF TO cl_gui_splitter_container,
splitter_2 TYPE REF TO cl_gui_splitter_container,
splitter_3 TYPE REF TO cl_gui_splitter_container,
cell_top1 TYPE REF TO cl_gui_container,
cell_bottom1 TYPE REF TO cl_gui_container,
cell_top2 TYPE REF TO cl_gui_container,
cell_bottom2 TYPE REF TO cl_gui_container,
cell_left TYPE REF TO cl_gui_container,
cell_middle TYPE REF TO cl_gui_container,
cell_right TYPE REF TO cl_gui_container,
grid1 TYPE REF TO cl_gui_alv_grid,
grid2 TYPE REF TO cl_gui_alv_grid,
grid3 TYPE REF TO cl_gui_alv_grid,
grid4 TYPE REF TO cl_gui_alv_grid,
grid5 TYPE REF TO cl_gui_alv_grid.
DATA: li_fieldcat1 TYPE lvc_t_fcat,
li_fieldcat2 TYPE lvc_t_fcat,
li_fieldcat3 TYPE lvc_t_fcat,
li_fieldcat4 TYPE lvc_t_fcat,
li_fieldcat5 TYPE lvc_t_fcat,
lv_layout TYPE lvc_s_layo,
lv_variant TYPE disvariant.
TYPES:BEGIN OF gty_itab1,
vbeln TYPE vbak-vbeln,
kunnr TYPE vbak-kunnr,
erdat TYPE vbak-erdat,
END OF gty_itab1.
TYPES:BEGIN OF gty_itab2,
vbeln TYPE vbap-vbeln,
posnr TYPE vbap-posnr,
matnr TYPE vbap-matnr,
kwmeng TYPE vbap-kwmeng,
netwr TYPE vbap-netwr,
END OF gty_itab2.
TYPES:BEGIN OF gty_itab3,
vbeln TYPE likp-vbeln,
ernam TYPE likp-ernam,
erzet TYPE likp-erzet,
posnr TYPE lips-posnr,
matnr TYPE lips-matnr,
END OF gty_itab3.
TYPES:BEGIN OF gty_itab4,
vbeln TYPE vbrk-vbeln,
fkart TYPE vbrk-fkart,
posnr TYPE vbrp-posnr,
fkimg TYPE vbrp-fkimg,
END OF gty_itab4.
TYPES:BEGIN OF gty_itab5,
kunnr TYPE kna1-kunnr,
name1 TYPE kna1-name1,
name2 TYPE kna1-name2,
END OF gty_itab5.
DATA:gt_itab1 TYPE STANDARD TABLE OF gty_itab1,
gwa_itab1 TYPE gty_itab1.
DATA:gt_itab2 TYPE STANDARD TABLE OF gty_itab2,
gwa_itab2 TYPE gty_itab2.
DATA:gt_itab3 TYPE STANDARD TABLE OF gty_itab3,
gwa_itab3 TYPE gty_itab3.
DATA:gt_itab4 TYPE STANDARD TABLE OF gty_itab4,
gwa_itab4 TYPE gty_itab4.
DATA:gt_itab5 TYPE STANDARD TABLE OF gty_itab5,
gwa_itab5 TYPE gty_itab5.
Global data
DATA: gt_fieldcat TYPE STANDARD TABLE OF lvc_s_fcat,
gwa_fieldcat LIKE LINE OF gt_fieldcat.
Macro to fill field catalog
DEFINE m_fill_field_catalog.
gwa_fieldcat-tabname = &1.
gwa_fieldcat-fieldname = &2.
gwa_fieldcat-scrtext_s = &3.
gwa_fieldcat-scrtext_l = &4.
Append field catalog details to field catalog internal table
append gwa_fieldcat to gt_fieldcat.
END-OF-DEFINITION.
*selection screen for selecting range of values
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_vbeln FOR vbak-vbeln. " OBLIGATORY. " OBLIGATORY
SELECTION-SCREEN END OF BLOCK b1.
CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
CLASS-METHODS:
handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
IMPORTING
e_row
e_column
es_row_no
sender. " sending control, i.e. ALV grid that raised event
ENDCLASS. "lcl_eventhandler DEFINITION
CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_double_click.
*DEFINE LOCAL DATA.
*DISTINGUISH ACCORDING TO SENDING GRID INSTANCE
CASE sender.
WHEN grid1.
READ TABLE gt_itab1 INTO gwa_itab1 INDEX e_row-index.
CHECK ( gwa_itab1-vbeln IS NOT INITIAL ).
CALL METHOD grid1->set_current_cell_via_id
EXPORTING
is_row_no = es_row_no.
CALL METHOD cl_gui_cfw=>set_new_ok_code
EXPORTING
new_code = 'ORDER_DETAILS'.
WHEN grid2.
READ TABLE gt_itab2 INTO gwa_itab2 INDEX e_row-index.
CHECK ( gwa_itab2-vbeln IS NOT INITIAL ).
CALL METHOD grid2->set_current_cell_via_id
EXPORTING
is_row_no = es_row_no.
CALL METHOD cl_gui_cfw=>set_new_ok_code
EXPORTING
new_code = 'DELIVERY_DETAILS'.
WHEN grid3.
READ TABLE gt_itab3 INTO gwa_itab3 INDEX e_row-index.
CHECK ( gwa_itab3-vbeln IS NOT INITIAL ).
CALL METHOD grid3->set_current_cell_via_id
EXPORTING
is_row_no = es_row_no.
CALL METHOD cl_gui_cfw=>set_new_ok_code
EXPORTING
new_code = 'BILLING_DETAILS'.
WHEN grid4.
READ TABLE gt_itab4 INTO gwa_itab4 INDEX e_row-index.
CHECK ( gwa_itab4-vbeln IS NOT INITIAL ).
CALL METHOD grid4->set_current_cell_via_id
EXPORTING
is_row_no = es_row_no.
CALL METHOD cl_gui_cfw=>set_new_ok_code
EXPORTING
new_code = 'BILLING_DETAILS'.
WHEN grid5.
READ TABLE gt_itab5 INTO gwa_itab5 INDEX e_row-index.
CHECK ( gwa_itab5-kunnr IS NOT INITIAL ).
WHEN OTHERS.
ENDCASE.
ENDMETHOD. "handle_double_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
SELECT vbeln kunnr erdat FROM vbak INTO TABLE gt_itab1
WHERE vbeln IN s_vbeln.
creating docking container
CREATE OBJECT docking
EXPORTING
parent = cl_gui_container=>screen0
ratio = 90
EXCEPTIONS
OTHERS = 6.
IF sy-subrc EQ 0.
ENDIF.
Create splitter container
CREATE OBJECT splitter_1
EXPORTING
parent = docking
rows = 1
columns = 3
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc EQ 0.
ENDIF.
Get cell container
CALL METHOD splitter_1->get_container
EXPORTING
row = 1
column = 1
RECEIVING
container = cell_left.
CALL METHOD splitter_1->get_container
EXPORTING
row = 1
column = 2
RECEIVING
container = cell_middle.
CALL METHOD splitter_1->get_container
EXPORTING
row = 1
column = 3
RECEIVING
container = cell_right.
Create 2nd splitter container
CREATE OBJECT splitter_2
EXPORTING
parent = cell_left
rows = 2
columns = 1
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc EQ 0.
ENDIF.
Get cell container
CALL METHOD splitter_2->get_container
EXPORTING
row = 1
column = 1
RECEIVING
container = cell_top1.
CALL METHOD splitter_2->get_container
EXPORTING
row = 2
column = 1
RECEIVING
container = cell_bottom1.
Create 3rd splitter container
CREATE OBJECT splitter_3
EXPORTING
parent = cell_middle
rows = 2
columns = 1
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc EQ 0.
ENDIF.
Get cell container
CALL METHOD splitter_3->get_container
EXPORTING
row = 1
column = 1
RECEIVING
container = cell_top2.
CALL METHOD splitter_3->get_container
EXPORTING
row = 2
column = 1
RECEIVING
container = cell_bottom2.
Create ALV grids
CREATE OBJECT grid1
EXPORTING
i_parent = cell_top1
EXCEPTIONS
OTHERS = 5.
IF sy-subrc EQ 0.
ENDIF.
CREATE OBJECT grid2
EXPORTING
i_parent = cell_bottom1
EXCEPTIONS
OTHERS = 5.
IF sy-subrc EQ 0.
ENDIF.
CREATE OBJECT grid3
EXPORTING
i_parent = cell_top2
EXCEPTIONS
OTHERS = 5.
IF sy-subrc EQ 0.
ENDIF.
CREATE OBJECT grid4
EXPORTING
i_parent = cell_bottom2
EXCEPTIONS
OTHERS = 5.
IF sy-subrc EQ 0.
ENDIF.
CREATE OBJECT grid5
EXPORTING
i_parent = cell_right
EXCEPTIONS
OTHERS = 5.
IF sy-subrc EQ 0.
ENDIF.
Set event handler
SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid1.
SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid2.
SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid3.
SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid4.
SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid5.
lv_layout-zebra = 'X'.
lv_layout-cwidth_opt = 'X'.
lv_variant = 'ZAREPAS22'.
Display data
PERFORM prepare_alv_fieldcat1 CHANGING li_fieldcat1.
*commented lines i suppose to include here....
CALL METHOD grid1->set_table_for_first_display
EXPORTING
is_variant = lv_variant
i_save = 'A'
i_default = space
is_layout = lv_layout
CHANGING
it_outtab = gt_itab1
it_fieldcatalog = li_fieldcat1
EXCEPTIONS
OTHERS = 4.
PERFORM prepare_alv_fieldcat2 CHANGING li_fieldcat2.
CALL METHOD grid2->set_table_for_first_display
EXPORTING
is_variant = lv_variant
i_save = 'A'
i_default = space
is_layout = lv_layout
CHANGING
it_outtab = gt_itab2
it_fieldcatalog = li_fieldcat2
EXCEPTIONS
OTHERS = 4.
PERFORM prepare_alv_fieldcat3 CHANGING li_fieldcat3.
CALL METHOD grid3->set_table_for_first_display
EXPORTING
is_variant = lv_variant
i_save = 'A'
i_default = space
is_layout = lv_layout
CHANGING
it_outtab = gt_itab3
it_fieldcatalog = li_fieldcat3
EXCEPTIONS
OTHERS = 4.
PERFORM prepare_alv_fieldcat4 CHANGING li_fieldcat4.
CALL METHOD grid4->set_table_for_first_display
EXPORTING
is_variant = lv_variant
i_save = 'A'
i_default = space
is_layout = lv_layout
CHANGING
it_outtab = gt_itab4
it_fieldcatalog = li_fieldcat4
EXCEPTIONS
OTHERS = 4.
PERFORM prepare_alv_fieldcat5 CHANGING li_fieldcat5.
CALL METHOD grid5->set_table_for_first_display
EXPORTING
is_variant = lv_variant
i_save = 'A'
i_default = space
is_layout = lv_layout
CHANGING
it_outtab = gt_itab5
it_fieldcatalog = li_fieldcat5
EXCEPTIONS
OTHERS = 4.
Link the docking container to the target dynpro
CALL METHOD docking->link
EXPORTING
repid = syst-repid
dynnr = '0100'
EXCEPTIONS
OTHERS = 4.
IF sy-subrc EQ 0.
ENDIF.
NOTE: dynpro does not contain any elements (ok_code -> GD_OKCODE)
CALL SCREEN '0100'.
END-OF-SELECTION.
*& Module STATUS_0100 OUTPUT
text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'.
SET TITLEBAR 'xxx'.
Refresh display of detail ALV list
CALL METHOD grid2->refresh_table_display
EXCEPTIONS
OTHERS = 2.
IF sy-subrc EQ 0.
ENDIF.
Refresh display of detail ALV list
CALL METHOD grid3->refresh_table_display
EXCEPTIONS
OTHERS = 2.
IF sy-subrc EQ 0.
ENDIF.
Refresh display of detail ALV list
CALL METHOD grid4->refresh_table_display
EXCEPTIONS
OTHERS = 2.
IF sy-subrc EQ 0.
ENDIF.
Refresh display of detail ALV list
CALL METHOD grid5->refresh_table_display
EXCEPTIONS
OTHERS = 2.
IF sy-subrc EQ 0.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE user_command_0100 INPUT.
CASE sy-ucomm.
WHEN 'BACK' OR
'EXIT' OR
'CANCEL'.
SET SCREEN 0.LEAVE SCREEN.
USER HAS PUSHED BUTTON "DISPLAY OREDERS"
WHEN 'ORDER_DETAILS'.
PERFORM order_show_details.
WHEN 'DELIVERY_DETAILS'.
PERFORM delivery_show_details.
WHEN 'BILLING_DETAILS'.
PERFORM billing_show_details.
WHEN OTHERS.
ENDCASE.
CLEAR : ok_code.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form ORDER_SHOW_DETAILS
text
--> p1 text
<-- p2 text
FORM order_show_details .
define local data
DATA:
ld_row TYPE i,
gwa_itab1 TYPE vbak.
CALL METHOD grid1->get_current_cell
IMPORTING
e_row = ld_row.
READ TABLE gt_itab1 INTO gwa_itab1 INDEX ld_row.
CHECK ( syst-subrc = 0 ).
SELECT kunnr name1 name2 FROM kna1 INTO TABLE gt_itab5
WHERE kunnr = gwa_itab1-kunnr.
SELECT vbeln posnr matnr kwmeng netwr FROM vbap INTO TABLE gt_itab2
WHERE vbeln = gwa_itab1-vbeln.
*REFRESH: gt_LIPS.
ENDFORM. " ORDER_SHOW_DETAILS
*& Form DELIVERY_SHOW_DETAILS
text
--> p1 text
<-- p2 text
FORM delivery_show_details .
define local data
DATA:
ld_row TYPE i.
gwa_itab2 TYPE vbap.
CALL METHOD grid2->get_current_cell
IMPORTING
e_row = ld_row.
READ TABLE gt_itab2 INTO gwa_itab2 INDEX ld_row.
CHECK ( syst-subrc = 0 ).
SELECT SINGLE * FROM vbfa WHERE vbelv = gwa_itab2-vbeln
AND vbtyp_n = 'J'.
SELECT posnr matnr FROM lips INTO TABLE gt_itab3
WHERE vbeln = vbfa-vbeln
AND vgpos = gwa_itab2-posnr.
*REFRESH: gt_LIPS.
ENDFORM. " DELIVERY_SHOW_DETAILS
*& Form BILLING_SHOW_DETAILS
text
--> p1 text
<-- p2 text
FORM billing_show_details .
define local data
DATA:
ld_row TYPE i.
gwa_itab3 TYPE lips.
CALL METHOD grid3->get_current_cell
IMPORTING
e_row = ld_row.
READ TABLE gt_itab3 INTO gwa_itab3 INDEX ld_row.
CHECK ( syst-subrc = 0 ).
SELECT SINGLE * FROM vbfa WHERE vbelv = gwa_itab3-vbeln
AND vbtyp_n = 'M'.
SELECT posnr fkimg FROM vbrp INTO TABLE gt_itab4
WHERE vbeln = vbfa-vbeln
AND vgpos = gwa_itab3-posnr.
ENDFORM. " BILLING_SHOW_DETAILS
*& Form prepare_alv_fieldcat
FORM prepare_alv_fieldcat1 CHANGING lpi_fieldcat1 TYPE lvc_t_fcat.
m_fill_field_catalog 'GTY_ITAB1' 'VBELN' 'Ord Num'(004) 'Order Number'(005).
m_fill_field_catalog 'GTY_ITAB1' 'kunnr' 'sold party'(006) 'SOLD TO PARTY'(007).
m_fill_field_catalog 'GTY_ITAB1' 'ERDAT' 'Ord Date'(008) 'Order Date'(009).
lpi_fieldcat1[] = gt_fieldcat[].
REFRESH gt_fieldcat.
ENDFORM. "prepare_alv_fieldcat1
*& Form prepare_alv_fieldcat
text
-->LPI_FIELDCAT text
FORM prepare_alv_fieldcat2 CHANGING lpi_fieldcat2 TYPE lvc_t_fcat.
m_fill_field_catalog 'GTY_ITAB2' 'vbeln' 'sales Doc'(010) 'sales document'(011).
m_fill_field_catalog 'GTY_ITAB2' 'POSNR' 'sales Doc'(012) 'sales documentITEM'(013).
m_fill_field_catalog 'GTY_ITAB2' 'matnr' 'Mat num'(014) 'material number'(015).
m_fill_field_catalog 'GTY_ITAB2' 'kwmeng' '*** ord qty'(016) 'cumilative order qty'(017).
m_fill_field_catalog 'GTY_ITAB2' 'netwr' 'nwt val'(018) 'net val of item'(019).
lpi_fieldcat2[] = gt_fieldcat[].
REFRESH gt_fieldcat.
ENDFORM. "prepare_alv_fieldcat2
*& Form prepare_alv_fieldcat
text
-->LPI_FIELDCAT text
FORM prepare_alv_fieldcat3 CHANGING lpi_fieldcat3 TYPE lvc_t_fcat.
m_fill_field_catalog 'GTY_ITAB3' 'posnr' 'del item'(020) 'delivery item'(021).
m_fill_field_catalog 'GTY_ITAB3' 'matnr' 'mat num'(022) 'material number'(023).
lpi_fieldcat3[] = gt_fieldcat[].
REFRESH gt_fieldcat.
ENDFORM. "prepare_alv_fieldcat3
*& Form prepare_alv_fieldcat
text
-->LPI_FIELDCAT text
FORM prepare_alv_fieldcat4 CHANGING lpi_fieldcat4 TYPE lvc_t_fcat.
m_fill_field_catalog 'GTY_ITAB4' 'posnr' 'bill item'(024) 'billing item'(025).
m_fill_field_catalog 'GTY_ITAB4' 'fkimg' 'act inv'(026) 'actuval inv qty'(028).
lpi_fieldcat4[] = gt_fieldcat[].
REFRESH gt_fieldcat.
ENDFORM. "prepare_alv_fieldcat4
*& Form prepare_alv_fieldcat
text
-->LPI_FIELDCAT text
FORM prepare_alv_fieldcat5 CHANGING lpi_fieldcat5 TYPE lvc_t_fcat.
m_fill_field_catalog 'GTY_ITAB5' 'kunnr' 'cust no'(029) 'cust number'(030).
m_fill_field_catalog 'GTY_ITAB5' 'name1' 'name1'(031) 'name1'(032).
m_fill_field_catalog 'GTY_ITAB5' 'name2' 'name2'(033) 'name2'(034).
lpi_fieldcat5[] = gt_fieldcat[].
REFRESH gt_fieldcat.
ENDFORM. "prepare_alv_fieldcat5
*appending
*FORM append_catalog1 USING value(p_fname)
value(p_tname)
value(p_coltext).
DATA : v_fcat TYPE lvc_s_fcat.
v_fcat-fieldname = p_fname.
v_fcat-ref_table = p_tname.
v_fcat-coltext = p_coltext.
APPEND v_fcat TO li_fieldcat1.
*ENDFORM. "append_catalogHi Srinivas,
What is the Report Requirement,
What is the Error Message u r getting. -
"When I try to create a new file I am getting this message: "While executing getDynamicContent in AddressURL.htm, a JavaScript error occured".... what should I do? Thank you, Lisa
Troubleshoot JavaScript errors | Dreamweaver CS4, CS5, CS5.5, CS6
Start with steps #4, #12 and #10.
Nancy O. -
Pop up error message while material posting
Hia,
how can i pop up error message while material posting based on user .
thank u in advanceHi Ram
Nobody is getting your requirement. Please explain your question.
Thanks & Regards
Kapil Nanda -
Hello all,
I execute a T-SQL query, which will retrieve large amount of data, however, I get an error message after a few seconde.
The error message is :
An error occurred while executing batch. Error message is: There is not enough space on the disk.
Who can tell me the reason and waht's the steps to solve this issue ?
Really thanks.
Thanks, Jed dengThe other two posters suggested that the problem with tempdb or you data/log files. This is not the case here. The error message relates to the client-side of things. Apparently SSMS needs to store data on disk. I don't recall exactly when this happens,
but I seem to recall that the files appear in you %TEMP% directory.
I would suggest that your correct action is to clean up the disk. Not the least there may be a lot of junk in your %TEMP% and %TMP% directories.
Erland Sommarskog, SQL Server MVP, [email protected]
Thanks Erland, I was not aware of this earlier. Now, I am able to find out one of the resons for slowness of SSMS gird. Also, I have just checked it with process monitor, SSMS is creating tmp%.tmp files..
- Chintak (My Blog) -
An unknown error occurred while executing the PowerShell script:
Hello all,
Not the most descriptive title, granted. I'm hoping this may prompt the next version toprovide additional valuable content.
Kindly requesting any help on this problem. I'm running VMM 2012 R2 version 3.2.7668
When I try to look at properties of an existing Private Cloud, I get this error, only if I "look" at certain attributes. If I stay away from the specific attributes, everything is hunky dory. For reasons unknown, after I get this error, I have
to exit and go back into VMM in order to get anything else to run.
The text in the error dialogue box is not entirely applicable because I was connected to the VMM server and will connect again, when I exit/relaunch.
An unknown error occurred while executing the PowerShell script:
The connection to the VMM management server scvmm2.mmmmmm.com was lost.
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Try the operation again. If the issue persists, contact Microsoft Help and Support.
ID: 27235
This is what I get in Events
Warning 4/9/2015 3:27:04 PM PowerShell (Microsoft-Windows-PowerShell) 4100 Executing Pipeline
Log Name: Microsoft-Windows-PowerShell/Operational
Source: Microsoft-Windows-PowerShell
Date: 4/9/2015 3:27:04 PM
Event ID: 4100
Task Category: Executing Pipeline
Level: Warning
Keywords: None
User: mmmmmm\paufra
Computer: tools-francis.mmmmmm.com
Description:
Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Context:
Severity = Warning
Host Name = Default Host
Host Version = 4.0
Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
Engine Version = 4.0
Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
Pipeline ID = 16
Command Name = Get-SCReplicationGroup
Command Type = Cmdlet
Script Name =
Command Path =
Sequence Number = 91
User = mmmmmm\paufra
Shell ID = Microsoft.PowerShell
User Data:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-PowerShell" Guid="{A0C1853B-5C40-4B15-8766-3CF1C58F985A}" />
<EventID>4100</EventID>
<Version>1</Version>
<Level>3</Level>
<Task>106</Task>
<Opcode>19</Opcode>
<Keywords>0x0</Keywords>
<TimeCreated SystemTime="2015-04-09T22:27:04.993655700Z" />
<EventRecordID>285</EventRecordID>
<Correlation ActivityID="{48059811-1A63-41E1-9057-7498D0E4FC20}" />
<Execution ProcessID="2344" ThreadID="4076" />
<Channel>Microsoft-Windows-PowerShell/Operational</Channel>
<Computer>tools-francis.mmmmmm.com</Computer>
<Security UserID="S-1-5-21-4008432563-1984933819-4238309236-2721" />
</System>
<EventData>
<Data Name="ContextInfo"> Severity = Warning
Host Name = Default Host
Host Version = 4.0
Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
Engine Version = 4.0
Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
Pipeline ID = 16
Command Name = Get-SCReplicationGroup
Command Type = Cmdlet
Script Name =
Command Path =
Sequence Number = 91
User = mmmmmm\paufra
Shell ID = Microsoft.PowerShell
</Data>
<Data Name="UserData">
</Data>
<Data Name="Payload">Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
</Data>
</EventData>
</Event>Hi Sir,
First , please try to run the VMM configuration analyzer on that computer :
http://www.microsoft.com/en-us/download/details.aspx?id=41555
In addition , please try to use "VMMTrace" mentioned in following article to collect trace log and find some useful information :
http://blogs.technet.com/b/jonjor/archive/2011/01/07/vmmtrace-simplified-scvmm-tracing.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] . -
Error message while installing Oracle BI Publisher
javaw.exe
the procedure entry point GetProcessImageFileNameW could not be located in the dynamic link library PSAPI.DLL
Please find the solution of this problem...I got this pop up error message while installing BI publisher..
thanks in advanceDo a search to find all copies of psapi.dll. You only need the one for IE 7. Rename the other one(s).
-
Error message while activating ODS ZFI_ORD( FI Order Details)
hi ,
I am getting this error message while activating the ODS ZFI_ORD( FI Order Details) "Value '1 - Hide = 2 Neck' (hex. '2000200020002000310020002D002000480069006400650020') of characteristic ZORD_DESC contains invalid characters
" . I am not able to get in which record the problem is and the message is not clear for records. How to check it.
Thanks,
PoojaHi
Try to see the Errorred Records At PSA itself. The Object ZORD_DESC can be cheched for values.
Data Target Request can be Deleted by making it Red. Edit at PSA
/people/sankar.kumar/blog/2006/10/11/loading-text-filestxt-into-bw-with-hex-option
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 u2013 "Allowed characters in the BW System"
Sample cleansing routine (#)
Help loading char EQUIP#1111#TAG#3311 SN#A01040 * into Cube
Hope it helps and clear -
[0098]SQL*Plus encountered oracle error 100 while executing SQL Statement
Hi,
i'm trying to delete duplicate records from a table and running following script. this script is triggered from a unix script. it successfully deletes the records but in the last throws following error message,
:[0098]SQL*Plus encountered oracle error 100 while executing SQL Statement:2:Investigation required:
can anybody please help? below is the script.
DECLARE
--CURSOR FOR DUPLICATE ROWS
CURSOR CUR_DUPLICATE_ROWS IS
Select RMS_NOTE_ID, RMS_SUMMARY_NOTE_ID, count(*) cnt from PARTY_NOTE
group by RMS_NOTE_ID,RMS_SUMMARY_NOTE_ID having count(*) > 1;
var_date PARTY_NOTE.PARTY_NOTE_CREATED_DATE%TYPE;
BEGIN
FOR DUPLICATE_ROWS_REC IN CUR_DUPLICATE_ROWS
LOOP
delete from party_note
where RMS_NOTE_ID= DUPLICATE_ROWS_REC.RMS_NOTE_ID
and RMS_SUMMARY_NOTE_ID= DUPLICATE_ROWS_REC.RMS_SUMMARY_NOTE_ID
and rowid not in (select max(rowid) from party_note
where RMS_NOTE_ID= DUPLICATE_ROWS_REC.RMS_NOTE_ID and RMS_SUMMARY_NOTE_ID= DUPLICATE_ROWS_REC.RMS_SUMMARY_NOTE_ID);
commit;
END LOOP;
EXCEPTION
WHEN NO_DATA_FOUND THEN
NULL;
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE(SQLERRM);
ROLLBACK;
END;Try this:
delete party_note
where rowid not in (select max(rowid)
from party_note
group by rms_note_id, rms_summary_note_id
commit;No need for cursors and loops.
And when that's completed, consider ALTERing the table to add a unique index (or even a primary key) so you'll never need to do this again.
Maybe you are looking for
-
My spooler won't stay running, I can't add printers.
My spooler won't stay running, I can't add printers. Not able to figure out even after firewall on/off, network on/off and all setting to default... Regards Reddy
-
Please, 1. Please set the Receivables system options for this operating
hi please i have this error: 1. Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables. can some one help me! think
-
Hi, I was wondering if there is a way to see my list of people contacted back in the month of May. It has been only 4 months but it tells me there are no messages from that month. To clarify, I am looking under messaging details. I just need to find
-
Can i use 1 apple id on 2 iphones?
Hi. I have the iphone 4S . I might be getting the 5 soon. If my iphone 4S doesnt work anymore, could i use it on my iphone 5? Also, if i can, would i hve to reinstall all apps or would they just import?
-
Error with connecting to WL 8.1 jms server in an applet
Hi all i tried to follow below technical article to enable my applet to subscribe to a JMS topic setup on the WL server 8.1 http://dev2dev.bea.com/products/wlserver81/whitepapers/WLS_81_jms_applets.jsp