Pop-up blocker icon and custom themes?
While searching with Google for instructions on how to re-enable pop-up blocker notification messages, I found this [http://forums.mozillazine.org/viewtopic.php?f=38&t=159901&start=0 discussion thread], where it was mentioned that FF places a icon in the status bar if pop-ups are blocked and notification messages are disabled. I have never seen such an icon in my FF installation. Some experimentation revealed that the icon ''does'' display if the FF default theme is selected, but not in the custom themes I am currently using: Alfred Kayser's Walnut2 1.8.60, and Ken Barbalace's Classic Compact 3.6.0.
Is this a problem with FF, or with specific themes? If you have the pop-up notification message disabled, do you see a notification icon in your status bar when pop-ups are blocked? Which custom theme are you using when you see it? Thanks...
If it doesn't work with a custom theme then the theme makers didn't include that icon in its theme. You can contact the creators of those themes and inform them about that.
You can re-enable the sliding info bar at the top of the browser.
You can look at these prefs on the about:config page and reset them via the right-click context menu:<br />
Info bar at the top: privacy.popups.showBrowserMessage<br />
Status bar icon: browser.popups.showPopupBlocker<br />
Similar Messages
-
i created boolean references in my main vi block diagram and copied them to my sub vi front panel. when wire my reference in my main vi to one the input node of the sub vi the wire is broken. the error says its a class conflict why?
Expanding and clarifying what BJD said;
After you create the temporary sub-VI that BJD mentioned, open its front panel and copy the reference control that LV created when it created the sub-VI.
This reference control will be correct class etc that you need. Use the control to replace the original control that you were attempting to wire up.
The technique of "create sub-VI...copy" always works for me.
There is one more thing that you should watch out for.
The mechanical action of the boolean can not be set for latch action when attempting to read the value using a value property node.
Trying to help,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
I am trying to install itunes for my pc and the run window will not come up and I have changed my pop-up blocker settings and it still will not appear.....help?
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/quicktime/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
I want to check the main diffrence in Pop up block enabled and disabled.But,i don't get any difference.Would u please help me to understand the difference using one practical example of website
Here's two popup test sites.
http://www.kephyr.com/popupkillertest/test/index.html
http://www.popuptest.com/ -
have removed my pop-up blocker completely and still receive the following error message when attempting to download iTunes: "The file was blocked because it does not have a valid digital signature that verifies its publisher".....any ideas?
That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
Spark skins, modules and custom themes: linking issues?
I've read some other threads on this topic that were related to the pre-release versions, but I can't get a complete answer get. I also opened an issue in the bug tracker (https://bugs.adobe.com/jira/browse/SDK-30748), but I'm also posting here, hoping to get some help.
Basically, I have a bunch of skin classes for the standard Spark controls (e.g. s:Button), as well as other skin classes for my custom SkinnableComponent objects. I need to reuse those skins in many projects, so I created a theme: I put in a Flex Library Project all my skin classes, all related graphical assets, and a defaults.css stylesheet that associates each component with its correct skinClass.
Now, in my modular application project, what is the correct method to link this compiled theme SWC? I tried different ways, and found some issue for each one:
In <app>-config.xml, using the <theme> compiler option: this way, modules don't pick up the skinClass correctly (default components use the standard Spark skin, and for custom components I get many skinNotFound errors).. its a pity, I like this method because command-line invocations of MXMLC (build scripts) automatically apply the settings in the config.xml file, while I have to manually keep in sync any additional compiler argument.
In <app>-config.xml, using the <theme> compiler option and add -compiler.isolated-styles=false: seems to work, but not always.. moreover, the option must be put in additional compiler argument, and not in <app>-config.xml, to have effect... I understand that the config.xml file, in a modular application, is only applied to the main application (or that it must replicated with correct name for each module)?
In additional compiler arguments, using the theme+= option.. these arguments should be used also for modules compilation, and this seems the most effective solution at the moment (swf size of compiled modules has slightly increased), but skinNotFound errors still happens sometimes, usually going away after a clean build.. maybe this has something with the incremental build performed by Flash Builder and/or optimization of modules?
Right now, I've tried adding also -keep-all-type-selectors in the compiler arguments to see how it goes...
Is my scenario supported by Flex 4? How should I setup my environment? I read how to create custom themes in the official documentation (http://help.adobe.com/en_US/flex/using/WS2db454920e96a9e51e63e3d11c0bf69084-7f85.html) and a specific help section exists about using styles with modules (http://help.adobe.com/en_US/flex/using/WS2db454920e96a9e51e63e3d11c0bf69084-799a.html#WSda 78ed3a750d6b8f1b97f82d12508050aa0-8000), but it only cover simple style sheets, no specific information about compiled themes and the suggested linking strategy.
I'm using Flash Builder 4.5.1 and compiling with Flex SDK 4.5.0 (both application and theme), the project use some Halo components (e.g. DateField) but almost all components are Spark, and I use Spark component for <s:Application> and <s:Module>. Modules are optimized for the main application, and are loaded using the ModuleManager.
Thanks in advance for any help.
Cosma ColanicchiaI'm not sure Spark components will work if the compatibility mode is set to
3. -
Change the look and custom themes, masterpage problem
I have created a masterpage and deployed it to the masterpage gallery.
I have created a spcolor file and a spfont file and deployed them to the theme catalog.
I have also created a New item in the composed look list like this:
Masterpage: /_catalogs/masterpage/mycustom.seattle.master
Theme: /_catalogs/theme/15/mycustom.spcolor
Font: /_catalogs/theme/15/mycustom.spfont
Image: none
DisplayIndex 3
The problem is this: The theme is not displayed in the Change the look preview window.
But if i change the masterpage back to std (/_catalogs/masterpage/seattle.master) in my composed look item. THEN it is displayed ??
Changing back to my custom masterpage, then it disappears.
Everything looks right, i can apply the theme through code. Masterpage is also changed in code and works.
The only place it doesn't work is in change the look.
The masterpage is deployed like this:
<Module Name="MasterPages" List="116" Url="_catalogs/masterpage" Path="MasterPages" RootWebOnly="TRUE">
<File Url="mycustom.seattle.master" Type="GhostableInLibrary">
<Property Name="UIVersion" Value="15" />
<Property Name="ContentTypeId" Value="0x010105" />
</File>
</Module>
What am i missing ??Hi blarsern,
Thanks for your sharing! It will be beneficial to others in this forum who meet the same issue in the future.
I will mark your reply as anwser to close this case.
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
WHERE IS THE POP UP BLOCKER ? And should i keep it blocked
WHERE CAN I LOCATE THE POP UP BLOCKER ON THE IMAC? And is it ok to unblock?
Hi,
I would start with the "More Like This" panel
https://discussions.apple.com/message/21703626#21703626
7:31 pm Wednesday; November 6, 2013
iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
Every time I go to Facebook, these "We Feedback" ads pop up. They appear throughout my post every other post. They appear on each side of my wall. I logged on to them and posted a comment and said that what they are doing is commendable. But STOP YOUR ADS, NOW!!!
Install this add-on: https://addons.mozilla.org/en-US/firefox/addon/adblock-plus/
Also, do you have McAfee Privacy Service installed? It disables the Firefox popup blocker. Disable it by clicking the Firefox button, go to Add-ons, then Extensions.
Please also visit the [http://www.mozilla.com/en-US/plugincheck/ Plugins Check] page and update where necessary. Outdated plugins expose your system to exploits. See the following security bulletins:<br><br>
* http://www.adobe.com/support/security/bulletins/apsb11-12.html<br><br>
* http://www.adobe.com/support/security/bulletins/apsb11-08.html -
Dear Experts,
Can any tell me is their any procedure to block
Vendor...and.....Customer.
or
Based up on the performence.
in PS Module.
Plz explain me procedure and customization.
Regards
ChandraHi
XD05 Block customer
XK05 Block Vendor
You can block posting, billing, order with the help of these.
I do not think it is there in PS. Logically it should not be restricted as module specific.
Regards -
Start-up issues with slowness, blocked icons and disk 'whirr'
Hi
Bought a MB Pro 13" standard model about six weeks ago. This morning, for the first time start-up was incredibly slow, I had the 'beachball' (no clock or data in the top right corner) and I could not select the icons on my Desktop. The Dock appeared after a while but then none of the programmes responded and the clock/battery data etc still did not appear.
It sounded like the hard disc was also trying 'to start' or something with a low whirr.
I´m new to Mac but have searched these forums and used the Disc Utility. The programme mentioned an Invalid Volume count and couldn't be repaired.
Any help or advice regarding what to do next? I'd like to avoid losing all my files, emails from Office '11 for example...
Many thanksWelcome to Apple Discussions!
It's also possible that your hard drive is failing. If so, you will need to replace it. If Apple replaces it under warranty, they will keep the old drive.
Try Disk Warrior and see if it fixes your problem. If it does, get an external drive and use Time Machine or Super Duper or Carbon Copy Cloner to create a backup, so that you won't have to worry about losing data again. All hard drives will eventually fail--that is just a reality. Having your data on 2 or more hard drives greatly decreases the chance of losing everything.
Good luck! -
Pop up/weird icons and freezing mac?
I am having some issues. First I have this weird USA flag but by my volume and time/date. I didnt put it there. I also have a window for Mackeeper when I close all my windows...I didnt put it there either. I can't get into my emails in Mail. I deleted and reinstalled all my email accounts (ok So I am in the process of doing them over and having no luck getting past the incoming servie stuff...) I also have problems with my computer stalling when trying to surf the web. not all the time but it is getting worse.
I have emptied cookies and browser history... I have emptied the trash and cleaned out files and unused apps. Now I have this stupid blue bar that says spotlight. I didnt put it there How do I get rid of it?
Is there some virus for macs out there I dont know about? This is giving me flash backs from when I had a Dell. Please Please Help I dont want to go back to having the same issues I had with windows. It SUCKED!!!!!
Thanks for any help or advice!
Thanks.
MysticleeTry this http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
-
Doing one variable at a time can be tedious. It's hard to believe there wouldn't be a solution for this.
I agree with tbd that there is rarelynever a reason for ton's of local variables.
Even if you feel you need many, it does not take much time to configure each right after creation and I see little use to globally change many from read to write or vice versa at a later point. An overuse of Local variable tend to make code hard to read and can easily cause race conditions. For one perspective have a look at some older discussions, e.g.: http://forums.ni.com/ni/board/message?board.id=170&message.id=112401#M112401.
To make a new local variable, I typically ctrl+drag an existing one (read or write as needed) and "right-click..select item" to assign the desired control/indicator.
LabVIEW Champion . Do more with less code and in less time . -
Arranging app icons and keeping them in place
Every time apps are updated they get moved. How do we permanently keep each in place?
Update through iTunes. It's safer anyway and takes less time (at least with the 2.1)
Hope this helps. -
TS3212 Already turned pop-up blocker off and still no pop-up asking to run or save... help!
...
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/quicktime/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?
Maybe you are looking for
-
How do I block an e-mail from a particular sender?
I want to block a particular sender but Idon't know how, thanks.
-
After transferring everything on my Macbook Pro Retina to a new one of the same, Mail will not work and I am unable to set up any Internet accounts. Any help would be greatly appreciated
-
XI Runtime Cache issue \ Integration Directory HMI
Hi guys, I have installed SAP XI. In the configuration steps for the INTEGRATION_DIRECTORY_HMI, I select the connection type H and am able to enter the necessary information. However, when I get to the Logon tab and try to select Basic Authenticati
-
A Lot of Question: PLEASE REPLY TO THIS THREAD
Hi, I am a 16 year old teen that is about to wait for the right moment to have my dream of starting a youtube channel. Ive done a lot of research comparing how any type of laptop will compare when I record and play my games, because i mostly want to
-
Can I stop roaming charges incurred while living near an international border?
I have just moved to northern Maine, near the border of Canada. The only cell service comes from Canada, from which I will be charged roaming fees. Is there any way to stop this, since I am not actually across the border? Thanks.