Pop-Up Coming "Do you want to run this application?"

Hi,
We are using applets for client side processing in browser.
The problem is that we are getting below pop-up message whenever applet is launched in a new browser.
Our applet contains all the required manifest attributes and is properly signed with a valid certificate verified by a trusted CA but still we are getting this pop-up.
TESTING ENVIRONMENT:
JREs - JRE7u6, JRE7u7, JRE8u25, JRE7u72, JRE7u65
Protocols - HTTP, HTTPS
We are getting the same pop-up on all tested JREs and protocols.
SCREENSHOT 1 - POPUP MESSAGE
SCREENSHOT 2 - MORE INFORMATION
Although, checking "Do not show this again" works but this is a client side change and we have thousands of clients.
Please suggest any solution for this.

hello paul, this message is coming from the java plugin itself and not from firefox: http://www.java.com/en/download/help/appsecuritydialogs.xml
unfortunately i'm not aware of any way to turn them off permanently for a certain site but you might want to try oracle's support - maybe they can be of better assistance.

Similar Messages

  • I have trouble in building stand-alone application, "you must intall Labview run-time engine on any computer on which you want to run this application"

    I have installed the LabVIEW 7.0 run time engine and checked all in the advanced setup on the installer setup slide. but I still get such a message saying that the target computer needs to have LabVIEW 7.0 run-time engine. What I want is a real stand-alone application even without having labview ... I used to think that's due to my program contains MATLAB nodes. But this is not true, since even without Matlab, it's still wrong. Please help, thanks!!!

    As was stated elsewhere, you have the option of building the runtime engine into your application when you build it. However, you can also create a "runtime engine application" by simply opening the application builder and doing a build without adding any source code files. The result is a small program (named lvrt.exe) that can run any LabVIEW code--whether or not its built into an executable.
    Such an application can be helpful if you are wanting to install several LV-based applications on the same computer in that it reduces the amount of redundant code on disk. All you have to do is make sure that Windows on the target computer associates the llb and vi file extensions with the runtime engine program.
    It can also be helpful during testing to run test code that isn't built into an executable.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Warning when trying to launch application over mapped drive "We can't verify who created this file. Are you sure you want to run this file?"

    We have 2 load balanced application servers that map drives with programs on them for users from a central server that are giving the warning "We can't verify who created this file. Are you sure you want to run this file?". Basically how it works
    is a user logs in to one or the other application servers (for example, 10.0.0.1 or 10.0.0.2) and runs a log on script that maps an L:\ drive to the users folder on the central storage server (10.0.0.100). When the user goes to launch the .exe from the L:\
    drive it presents that warning.
    I've looked around and have seen recommendations that you need to add the site to the local intranet zone for IE, but when I try to add L:\ it tells me that I have entered an invalid sequence. It appears that you can only put network shares in that location,
    which is not how we're mapping the drive.
    Has anyone run in to this before and knows how to resolve it?
    Thanks!

    Hi,
    A mapped drive letter is not supported so please try to input \\server or \\server\folder to see if it will help. 
    If you have any feedback on our support, please send to [email protected]

  • How can I turn off the "this application's signature HAS been verified do you want to run it?" message?

    I'm running Firefox 22.0 on the Mac, OS X 10.6, Java 6 SE fully updated on the Mac. I have corporate web sites I must use throughout the day that have Java applets associated with them, one of them being the Ephox web text editor. EVERY TIME I open a page that has the editor being invoked on it, I get FOUR messages that say "This application's signature has been verified. Do you want to run this application?" Two of them will have the name of the editor. Two of them will have blanks. ALL of them show "ALWAYS TRUST content from this publisher" as checked. RUN, RUN, RUN, RUN.
    Although I have a number of addins installed, I have had to disable them to get these apps to load without crashing.
    NOTE that this does not happen in Firefox 22 on Windows 7; nor did it with the same apps (no upgrades at the corp. website) on Firefox 18 or 19 on the Mac.
    Help???

    We are sorry this is more like a Java issue than a Firefox one.
    However, I found this that may be helpful to solve your problem, check it out: [http://stackoverflow.com/questions/1472494/suppressing-applications-digital-certificate-has-been-verified-do-you-want-to-ru http://stackoverflow.com/questions/1472494/suppressing-applications-digital-certificate-has-been-verified-do-you-want-to-ru]

  • I keep getting the error message "Missing PDFMaker files. Do you want to run the installer in repair mode"

    I keep getting the error message "Missing PDFMaker files  Do you want to run the installer in repair mode"when I try to convert a file into a pdf.  I have tried uninstalling then reinstalling but I continue to get the message.  I am able directly print file, but there are some errors in the pages, but some of them have font errors. Please advise.

    Hey Suzanne,
    Could you please let me know what Acrobat version are you using and what kind of file are you trying to convert to PDF.
    If you are using an MS Office application, then PDF Maker has to be an active plug-in for the PDF conversion.
    Have you tried using Print to PDF option from the File menu for the same?
    Please check and then let me know.
    Regards,
    Anubha

  • Acrobat X bug - stuck in cycle - "missing pdfmaker files" "do you want to run the installer"

    Hello,
    I just installed Acrobat X on a Windows 7 X 64 with office 2010 x 64 install.    I can print from within office to PDF, however if I right click on a document in explorer and attempt to convert to PDF without opening office, I get "missing pdfmaker files" "do you want to run the installer in repair mode" right after I give it a file name.   If ignore, it won't print.   If I try to fix by running the installer in repair mode, it does some install process but it still gives me the same error.   Nothing shows up in the event viewer.  I tried to run an acrobat update but is says no updates are available.  I have tried uninstalling and downloading the trial version - it has the same issue

    Acrobat X PDFMaker supports 32-bit Office 2010.
    With 64-bit Office 2010 you should be able to use the Adobe Printer; but, for PDFMaker functionality you'll need Office 2010 32-bit.
    http://kb2.adobe.com/cps/333/333504.html
    Be well...

  • Do you want to run the script? Yes.

    I'd like to be able to run a script without having to confirim that I want to run the script.
    "You are about to run a script in Adobe InDesign CS5. You should only run scripts from a trusted source.
    Do you want to run the script?"
    Is there a way to execute the script without having to click this?

    I should have clarified that I want to execute the file externally, through a BAT file. I'm trying to eliminate all GUI steps. Essentially I have a set of routines I'd like run once a day, it would be ideal to run them outside of office hours as I'm dealing with the files and InDesign in other ways throughout my workday.
    However as you pointed out if you run the script through the Script Panel there is no dialog asking for confirmation, so it must be possible to execute a script without the dialog.

  • Adobe FP 10-A Script in this movie is causing Adobe FP 10 to run slowly. If it continues to run your computer may become unresponsive. Do you want to abort this script? yes or no. How do I fix this crash?

    Adobe FP 10-A Script in this movie is causing Adobe FP 10 to run slowly. If it continues to run your computer may become unresponsive. Do you want to abort this script? yes or no. How do I fix this crash?

    Hi,
    Some "movies' are actually Flash files.
    This means the Flash App will play them (possibly in a browser in some cases).
    Depending where this item is and how it is playing it may be effected by other things
    A web page can include javascript.
    Apple uses javascript here to help with creating the posting box, the Edit options, Adding pics/smilies and the like.
    Sometimes the javascript can be what is called a runaway process and gets sort of stuck in an endless loop.
    If it is a free standing item then it might be triggered by AppleScript on the Mac. (or be modified in some way)
    Again if the Script (normally written with a upper case S) is not perfect it can cause problems.
    9:09 pm      Wednesday; February 26, 2014
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Missing PDFMaker files. Do you want to run the installer in repair mode?

    I just installed Adobe Acrobat 8. I am running XP and Office 2003. When I am trying to create a PDF file, from multiple files (combine files option), I get the error, "Missing PDFMaker files. Do you want to run the installer in repair mode?"
    I choose YEs, and it install something and then restarts, but it still does not work. Same thing happens every time. Thanks for your help!!!!

    What sort of files are you trying to combine. My suggestion is to make your life simple. Create the pdfs separately, then combine the resulting pdf files.

  • I am facing 'How do you want to use this disc' whenever I read/open any lightscribe discs having data.

    Hi,
    When I insert a lightscribe DVD/CD into a lightscribe optical drive, then when I click to open the DVD, I faced this error 'How  do you want to use this disc', although the DVD was full of data. When opening these 
    lightscribe DVD/CD via NON lightscribe optical drive, I noticed that the DVD/CD  opened well without any problems at all.
    Also, how can the System show to me 'How  do you want to use this disc' , in particular when  a DVD is non rewritable(DVD-R) and also contains data)?
    Bear in mind, not all DVDs/CDs were not detected. However, only full lightscribe discs' (having data)
    However, even blank lightscribe discs were detected without problems. When insert a lightscribe disc having data, then I faced that error. However, when inserting  blank lightscribe discs I found that the disc were opened.  Also,
    non lightscribe discs were opened well.
    When checking the device manager, I didn't see any issue with DVD/CD drive. If there were a problem unrecongnising, then I would have seen 'a remarkable mark' in front of it.
    Note: I have faced this problem after trying formating a rewritable CD inserted onto the drive. Althouthg the format failed, all data on the disc was deleted. Anyway, after that, then inserting full-lightscribe  discs are unregonised
    Do you think the problem wth my optical drive. IF so, I would be saying why it wasn't happened with all other non lightscribe discs. If my lightscrib discs were corrupted, then why would they have opened well on another laptop.
    I have done:
    Press the Windows logo key+R to open the Run dialog box.
    Type devmgmt.msc in the Run dialog box, then press Enter. If you are prompted for an administrator password or for a confirmation, type the password, or click Allow
    In Device Manager, expand DVD/CD-ROM drives, right-click the CD and DVD devices, and then clickUninstall.
    When you are prompted to confirm that you want to remove the device, click OK.
    Restart the computer.
    But the same prolbem is existing.
    yes there is a virtual CloneDrive program installed on my PC, however, there is no any CD mounted into it. Even if a CD was mounted into Virtual Clondrive, there would be no problem at all, because the virtual CloneDrive is used to only
      mount ISO disc images into it, and not physical discs.
    Any I have do what you have said, when inserting a light-scribe disc having data, then I open it, I found this
    NOTE: in the above screen shot there is a lightscribe DVD having data inserted. However, in the screen shot below, there  a ightsrbe DVD not having data inserted. In the first screen shot, the disc is not reconginsed by Windows, however, in
    the second is recognised. 
    Even when I have inserted a lightscribe disc not having data(empty), it opened well regardless of  what virutal CloneDrive is enabled or disabled.
    But when cliced on my problem didn't solve,
    A man should convert his anger and sadness into strength to continue living in this life.

    Hi,
    The product Name of my computer is: HP Pavilion dv6-6093ex Entertainment
    Notebook PC support
    The number of my computer is : LM610EA#A2N.
    Could anyone please at this splendid forum take some of their precious time
    out to really reply my questions and solve my problems?
    FIRST OF ALL:
    My HP Pavilion Laptop is about 3 years old.
    My
    sister's Dell Inspiron laptop is 3 years old.
    My HP lapotp is well-cared, as opposed to my sister's Inspiron Dell laptop,
    which is always thrown in dust without caring at all. Also, its battery is
    always inserted even when it is fully charged while the laptop is plugged in to
    the main power supply.
    However, my laptop is either used on only battery, or on plugin. Also, it is
    kept from the dust.
    But, I really found that the battery of the Dell laptop
    still lasts about three and half hours, and there is no problem cooling fan is
    not oproperly preporly.
    I only remember one thing differently done on my laptop battery which is I
    charged it fully, then I stored it without using it for about four months, then
    when I reused it, I found it got worse over time. I.e. first time of using it
    after storing,I found it empty, then I charged it again fully, however, then it
    lasted about 2 hours, then 1 and half hours, next an hour, now it is only
    lasting about 20 minutes without performance. If there is high performance, then
    the computer shuts down suddenly.
    My problem is follows:::
    First: Whenever I inserted any Containing Data OR Data
    CD/DVD-R LightScribe discs, I found that HP optical driver was
    unable to read them. When clicking on the optical disc drive
    'duble-click', then I find that disc opens as this way(NOT: With a CD/DVD player
    is grayed out)
    Blank Or Used CD, DVD±R,RW lightscirbe is unable to be
    read:(clicking on it let it Open like a USB FlashDrive or With a CD,DVD player:
    NOTE: with CD/DVD Player is grayed out)
    Used CD/DVD±R/RW Non-LightScribe disc opens normal:
    Blank CD,DVD±R,RW Non-LightScribe opens normal(Opens like a USB FlashDrive or
    With a CD,DVD)::
    My HP CD/DVD DVD±R/RW specis are::
    Optical Drives
    hp CDDVDW TS-L633R
    Media Type DVD Writer
    Name hp
    CDDVDW TS-L633R
    Availability Running/Full Power
    Capabilities Random
    Access, Supports Writing, Supports Removable Media
    Read capabilities CD-R,
    CD-RW, CD-ROM, DVD-RAM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R DL, DVD-RW
    DL, DVD+R DL
    Write capabilities CD-R, CD-RW, DVD-RAM, DVD-R, DVD-RW, DVD+R,
    DVD+RW, DVD-R DL, DVD+R DL
    Config Manager Error Code Device is working
    properly
    Config Manager User Config FALSE
    Drive E:
    Media Loaded
    FALSE
    SCSI Bus 0
    SCSI Logical Unit 0
    SCSI Port 0
    SCSI Target Id
    1
    Status OK
    Trying to solve the problem,
    I have done these steps in order::
    I tried checking with dignostic ulitiy:
    I have tried Advanced View , this is the file of output data
    diagnostic utility
    LightScribe System Software Settings:
    SOFTWARE\LightScribe\MessageDir
    C:\Program Files (x86)\Common
    Files\LightScribe\
    SOFTWARE\LightScribe\LSPrintDialog C:\Program Files
    (x86)\Common
    Files\LightScribe\LSPrintDialog.exe
    SOFTWARE\LightScribe\LSPrintingDialog
    C:\Program Files (x86)\Common
    Files\LightScribe\LSPrintingDialog.exe
    SOFTWARE\LightScribe\LsPrintLauncher
    C:\Program Files (x86)\Common
    Files\LightScribe\LSPrintLauncher.dll
    SOFTWARE\LightScribe\ResourceDir
    C:\Program Files (x86)\Common
    Files\LightScribe\res
    SOFTWARE\LightScribe\LSPrintAPI C:\Program Files
    (x86)\Common
    Files\LightScribe\LSPrintAPI.dll
    SOFTWARE\LightScribe\Update\UpdateShellCommand
    http://www.lightscribe.com/go/downloads/windows
    SOFTWARE\LightScribe\Update\PreviousVersion
    1.18.20.1
    SOFTWARE\LightScribe\Update\CurrentVersion
    1.18.27.10
    SOFTWARE\LightScribe\Update\TrailingVersion
    SYSTEM\CurrentControlSet\Services\LightScribeService\Type
    16
    SYSTEM\CurrentControlSet\Services\LightScribeService\Start
    2
    SYSTEM\CurrentControlSet\Services\LightScribeService\ErrorControl
    0
    SYSTEM\CurrentControlSet\Services\LightScribeService\
    SYSTEM\CurrentControlSet\Services\LightScribeService\DisplayName
    LightScribeService Direct Disc Labeling
    Service
    SYSTEM\CurrentControlSet\Services\LightScribeService\ObjectName
    LocalSystem
    SYSTEM\CurrentControlSet\Services\LightScribeService\Description
    Used by the LightScribe software components to support 3rd party disc labeling
    applications using the LightScribe COM Application Programming Interface
    (LSCAPI). This service needs to run for LightScribe direct disc labeling to
    work.
    SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
    SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
    SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\TypesSupported
    7
    SYSTEM\CurrentControlSet\Services\Cdrom\Enum\0
    IDE\CdRomhp_CDDVDW_TS-L633R______________________0300____\4&334f7860&0&0.1.0
    SYSTEM\CurrentControlSet\Services\Cdrom\Enum\Count
    2
    SYSTEM\CurrentControlSet\Services\Cdrom\Enum\NextInstance
    2
    SYSTEM\CurrentControlSet\Services\Cdrom\Enum\1
    SCSI\CdRom&Ven_ELBY&Prod_CLONEDRIVE&Rev_1.4\1&2afd7d61&0&000000
    SOFTWARE\Microsoft\Windows
    NT\CurrentVersion\Winlogon\allocatecdroms
    0
    SYSTEM\CurrentControlSet\Services\CDRom\autorun 1
    SOFTWARE\INTEL\Intel
    Application Accelerator Not detected
    Drives and Media:
    Drive 0 : hp CDDVDW TS-L633R 0300 219 (E, Media
    Imaging Parameter : 114
    I tried running the below command line to fix potential disk issue 'Chkdsk
    /r /f'
    I cleaned the drive, discs, and so on.
    I have uninstalled the all third-party data recording software.
    I have uninstalled the Cyber DVD suite, lightscribe system software which
    came pre-installed with my HP pavilion Notebook.
    I have recovered my system from the Factory Recovery discs.
    I have tried opening all those LightScibe discs not opening on my HP optical
    drive, on a Dell optical drive, and all of them were opened well, although Dell
    optical drive did not have a lightscribe feature at all., nor third party disc
    recording software
    However, the problem is still with opening the discs LIGHT-SCRIBE
    Thus, my questions are:
    How to determine if the drive is corrupted and needs to be replaced with
    another one.
    I think there something needed to be done on the BIOS Of my HP
    laptop[[[A similar problems happened on my Desktop computer's optical
    drive which is as follows:::(ALL discs are opened as empty by Optical Drive of
    My Desktop Computer) ---while my optical drive of my desktop was connected to
    the primary slave IDE, and the HDD was connected to the
    primary master IDE, the optical drive and hard disk are functioning
    well. However, I remember that while burning an image with Nero essential V: 5,
    something went wrong, and then the Optical Drive of My Desktop Computer
    (HL-DT-ST DVD-RAM GH22NP20) became NOT recognised/Installed on
    BIOS, although it was still shown on the device manager as a
    recognised device. Also, it was listed on my computer, however, when entering a
    disc(blank or with data) into the drive, I found it was not recognised, and it
    opened empty(no files at it), although it contains data. Thus, I decided to boot
    to BIOS, and clicked on 'Autodetection for IDE', then I found that only HDD was
    still shown as installed on BIOS. However, the optical drive was not. Th I tried
    clicking on it on BIOS and then clicking on 'enter' to try to let the device be
    re-recognized. However, that made no difference. I had to take part my computer
    ,and then reconnected the optical drive onto the secondary slave
    IDE , and let HDD connected to the same primary master IDE.
    Then, I found that the problem solved and all discs became being read
    normally. Aslo, optical drive became installed on BIOS]]]
    What is meant with with double Layer Support.
    How much does it cost?
    A man should convert his anger and sadness into strength to continue living in this life.

  • Do you want to erase this iPhone and sync with this iTunes library?

    Why ON EARTH would I want to do this??  Come on Apple, copy protection aside, this is the stupidest prompt in the history of prompts.
    The basic problem (if you Google it) that many many many many legitimate purchaser's of music are running into is this prompt.  And here is why:
    1.  We have an iPhone with a bunch of purchased songs on it and was at one point working with another iTunes library.
    2.  For whatever reason our computer crashes, the computer is gone/sold, not available, dead, pick your poison, it happens.
    3.  We setup a new computer and install iTunes and get a prompt to "Authorize" this computer (apparently we get 5 authorizations total).
    4.  We try to get all the songs from our iPhone back into iTunes and click the Sync button and ...
    5.  We get the following:
    The iPhone "Your iPhone's name" is synced with another iTunes library.  Do you want to erase this iPhone and sync with this iTunes library?
    An iPhone can be synced with only one iTunes library at a time.  Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library.
    Really?  This is what I have to do, wipe out all my purchased songs so that iTunes and sync with a new library?  At what point did Apple think this idea was even remotely in the best interest of their customers?  Seriously?
    So now I'm stuck with an iPhone with songs on it, a computer with songs on it, but neither able transfer songs ... Happy Happy Joy Joy.  This is NUTS!?  Why punish people that you can verify they've purchased their songs with this bizarre scheme ... and further more, what if some of my songs on my iPhone were brought in from a valid CD purchase?
    So my only way out of this craziness, is to use a 3rd party app that will hack the transfer for me?  This is good how?  I'm sorry, but at what point did Apple's $40 Billion (yes Billion) profit for 2012 instigated this sort of treatment to valid paying customers?
    So ... here I am, anyone have a solution to this using "valid" means (without losing all my music) or is 3rd party hacks my only option?
    Rob

    Rob A. wrote:
    tt2,
    So if I understand you correctly ... I can't move or sync content that was imported via my own CD's that is now on my iPhone back over to my computer?
    Not with iTunes as your only tool, no.
    The ONLY way I can proceed is with an iPhone backup and then restore that iPhone backup to my computer rather than my iPhone?  I assume this will trigger yet another "used activation"?
    No you need a third party tool that will copy your other non-iTunes purchased media and photos not in the cameral roll across to your computer. (Some are listed, you can search the web for others).
    When you have recovered all the media you want you can then backup the iPhone to the computer (this backup ONLY includes application data and settings, and the cameral roll. After you have backed up this data to the computer you can then immediately restore the recently made backup to the iPhone. The data in the backup will obviously be copied back but all media must have been added to the library or it will be removed from the device.
    Your lost computer will count as an "activation" as will the new one. Apple devices don't add to the count. You can reset all your activations (including those you can't physically access) every 12 months should the need arise.
    Am I the only one that thinks this is the most crazy and bizarre process of simply moving a music file from one of my devices to another of my devices?  Especially ones that were imported from CDs.
    You still have the CDs? You can import them again. You sold, gave away, threw away the originals? Technically you no longer have the right to listen to the tracks you ripped. Is it inconvenient? Sure. One might argue that the very reason Apple & iTunes were able to drive the move to digital music to start with is that their system was designed to prevent the casual use of their devices as a means for "the kids" to simply "gift" their music libraries to each other without the tediously time-wasting efforts that the previous generation had to go through with home-taping. This no doubt helped get the content owners on board. Of course memory sticks and portable hard drives now make it trivially easy to copy content from one computer to another and indeed to simply backup your own content against a disaster but most people don't do either. Likewise they don't read instructions or terms and conditions until they are inconvenienced, and then complain. You and I might both wish iTunes made it easier, but it doesn't. And this isn't the place to complain about it. Use iTunes Feedback. You want help, it has been offered. Please read and inwardly digest it all properly this time. It does explain what you need to do to recover your data and safeguard it for the future.
    tt2

  • I could previously open my itunes program on my computer. Not now as when it asks, Do you want to allow this program to make changes to your computer and I select, Yes, it shuts down.  I have removed and re-installed itunes, checked firewall. Pls help

    I could previously open my itunes program on my computer and sync with ipad, ipod and iphone but no longer. When I select itunes a dialogue box opens  with question - "Do you want to allow this program to make changes to your computer"  When I select YES, it just shuts down.   I have removed and reinstalled itunes. have checked firewall and spent hours trying to fix. Please help.

    A possible cause of this error is that Firefox is set to run as Administrator.
    Check that Firefox isn't set to run as Administrator.
    Right-click the Firefox desktop shortcut and choose "Properties".
    Make sure that all items are deselected in the "Compatibility" tab of the Properties window.
    * Privilege Level: "Run this program as Administrator" should not be selected
    * "Run this program in compatibility mode for:" should not be selected
    Also check the Properties of the firefox.exe program in the Firefox program folder (C:\Program Files\Mozilla Firefox\).

  • "Are you sure you want to leave this page?" on saving Publishing Page

    Hi all,
    we're getting some ... interesting ... behavior in IE.
    Setup:
    We have a page layout based on some content type. Both contain (besides other fields) a DateTimeField which is shown in edit mode.
    When a user clicks "Save" after editing the page, he is presented a modal dialog saying "Are you sure you want to leave this page?" with the options to "stay" or "leave".
    When a user clicks "leave" the following behaviour is as expected (changes are saved, page is working). When a user clicks "stay" he sometimes gets prompted for conflicts.
    As soon as the DateTimeField is removed from the page layout (but is kept in the content type) there are no more such pop-up dialogues.
    This happens only in IE 9/10/11. FF and Chrome work fine.
    Do you have any suggestions, on how to fix this? Not the conflicts part, but the fact that this dialogue box is shown at all.
    - Ben
    Code
    Field Definition
    <Elements xmlns="http://schemas.microsoft.com/sharepoint/">
    <Field
    ID="{401b4dad-f4db-45a8-a111-42ed278a3298}"
    Name="FI_Erstellungsdatum"
    DisplayName="MyDate"
    Type="DateTime"
    Required="TRUE"
    Group="MyGroup"
    Format="DateOnly">
    <Default>[Today]</Default>
    </Field>
    </Elements>
    Reference in Content Type
    <FieldRef ID="{401b4dad-f4db-45a8-a111-42ed278a3298}" DisplayName="MyDate" Required="TRUE" Name="FI_MyDate" Format="DateOnly" />
    Reference in Page Layout
    <SharePoint:DateTimeField FieldName="401b4dad-f4db-45a8-a111-42ed278a3298" runat="server"></SharePoint:DateTimeField>
    Internet Explorer
    I already tried seeting IE (Security) Settings back to deafault and disabling add-ons. It did not help.
    The site is accessed via https and is in the Trusted Sites list in IE.

    Hi SomeTallGuy,
    According to your description, my understanding is that the model dialog appears after you click Save.
    My suggestion as below:
    1. Set the Internet Explorer Security Setting to low.
    2. If you have add your site to trusted sites, try to delete all the browser data, such as cookie, temporary files to test whether it works.
    Best regards,
    Zhengyu Guo
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Zhengyu Guo
    TechNet Community Support

  • How can I stop the "Are you sure you want to close this window?" box?

    Hello,
    Could someone please tell me how to stop safari/google from warning when there is text written in the search query box of google and I try to close the window? The message runs as follow: "*Are you sure you want to close this window?* You have entered text on "Google". If you close this window, your changes will be lost. Do you want to close this window anyway?"
    I'm using Safari 3.2 and I have my preferences set to open new links in new windows rather than in tabs. I did try unchecking the warning message for closing multiple tabs, despite the fact that I'm not using tabs. However, that didn't work.
    Thanks in Advance

    I would have to say it's a bug in Safari 3.x, as it apparently worked in Safari 2.x. I'm sure a bug report has already been filed on this, but if you want to give feedback to Apple about it and encourage them to fix it sooner rather than later, use this Feedback link.
    Mulder

  • Trying to sync iPod with library, but receive this message, "The iPod is synced with another itunes library.  Do you want to erase this ipod and sync with this itunes library".  I do not want to erase my iPod... Any suggestions??  Please help!!

    Trying to sync ipod with itunes library, but I keep getting this message, "  The ipod is synced with another itunes library.  Do you want to erase this ipod and sync with this i tunes library?" 
    I do not want to erase my ipod!!!  Any suggestions?? please help!

    Another way. You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive (works the same with an SD card) into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
    Using The iPad Camera Connection Kit
    http://support.apple.com/kb/HT4101
     Cheers, Tom

Maybe you are looking for