Pop up enrollment form after teh action run

Hi experts,
I have a situation where I want the Enrollment thing (HRBEN0001) to come up after I run an action. The action runs fine i.e. it goes through all the infotypes but it doesn't come up with enrollment part like the one it comes up with new hire action. HOw do I bring that up.
The infotypes sequence I have is: 0001. 0008 0171 0378
I want HRBEN001 to come up right after 0378. Please guide me how it can be done.
Thanks,
Rashmi

Hi Rashmi,
I am having a similar situation to pop-up BN enrollment form after filling infotype 0378. Can you help me on how to achieve the same.
Thanks in advance
Lakshmi

Similar Messages

Enrollment form question

Hi,
I have a quick question (or maybe) two about sending enrollment form. Do I have to wait for enrollment form to be accepted, before submitting application ? I've read already in some other post that I do not have to, is that right ? As far as I understand, the enrollment form will be needed only in case, when total value of all sold copies exceeds 100$, right ? And finally, what about Intel AppUp, does it work the same way as for Marketplace ?
Thanks for any clarification and answers to these questions!
best regards
Mateusz

Hi Mateusz,
Enrollment form is not required for free application. If you are submitting a paid application, you can submit your enrollment form after publishing the application. You need to ensure that you have submitted the enrollment form in order to get paid for your application that you distribute through AIR Marketplace or through your own website.
Both Intel's and AIR Marketplace's payment policies are covered in the InMarket documentation: http://learn.adobe.com/wiki/display/InMarket/07+Settlement+and+Payment
I would highly recommend you to go through it as it covers detailed answers to all your questions.
Let me know if you have any further questions.

"ORA-12222 TNS no such protocol adapter" When running Forms after installing Portal

We have a Forms 6i (web) application running on 9iAS. This worked fine. But after installing Portal on the same 9iAS, we got the following error when starting the WebForms application:
ORA-12222 TNS no such protocol adapter
Who knows a solution?
Configuration
9IAS v1.0.2.2
8.1.7
Form 6i Patch 10
Windows NT
Best regards,
Harm van Zoest

This is s SQLNET error.
You can search for it on OTN using the search button.
IT usually means that the tnsnames.ora file was changed. Or that you are now using another tnsnames.ora.

Action stop after 30 min run

I run a simple shadow action, but after it is running for 30 min the Photoshop just crashed and there is nothing in the log file. The action in this period adjust 2298 items. Is the any limitation or what can cause this crash?
From the windows I get this log:
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Photoshop.exe
Application Version:    15.0.0.58
Application Timestamp:    536b438e
Fault Module Name:    Photoshop.exe
Fault Module Version:    15.0.0.58
Fault Module Timestamp:    536b438e
Exception Code:    c0000005
Exception Offset:    00000000016c5f55
OS Version:    6.1.7601.2.1.0.256.48
Locale ID:    1038
Additional Information 1:    7968
Additional Information 2:    79680a764f3c0cc390ff0ee35580c182
Additional Information 3:    241e
Additional Information 4:    241e62dc4664a7b2d598aeb643d7ae3d
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Looks like cc 2014 Photoshop.exe crashed. However you state its a simple action that it was running over 30 minuets. You did not post the action of state wither you were batching the action. However you stated that 2298 items were updated. I do not know what you classify an item to be. If by item you mean image file and your batching the action. If the Action adds documents to Photoshop open documents and does not close then before ending the number of document open increases with each image file processed. After processing 2298 files the could be a countless number of open documents consuming RAM and scratch space your machine may have simply ran out of resources and Photoshop crashed which freed up the consumed resources.

How to get requisiton number on the form after running requisition import

Hi guys,
My requirement is populated requisition number on custom form after requisition created.plz tell me link between concurrent request id and standard requisition tables
where i can fetch requisition number after running requisition import program. plz give sql script.
thanks.....

Hi;
Did you check etrm site?
Regard
Helios

Forms 10g installed and running on Windows Vista

Update 12-Dec-2008: Oracle has published NOTE 559067.1 -- How to Install Developer Suite 10.1.2.0.2 - hence 10.1.2.3 - on Windows Vista, 24-OCT-2008 with some installation help.
Update 07-July-2008: Added text at the bottom showing how to find patchsets for Forms 10g.
Update 29-May-2008: This thread was started in November, 2007. In January, 2008, Oracle released Patch 3 for Forms 10g, which makes Forms 10g compatible with Windows Vista. As time permits I'll try to keep the information in this post up to date. Updated information will be inserted as blue text.

Original message begins here:
This is a second thread I am posting to outline the steps I have used to install Forms on a Windows Vista Home Basic laptop. The other thread describes installing Forms 6i:
Forms 6i installed and running on Windows Vista
Please read through the initial part of that post for the background. I realize Oracle has not certified Forms 10g to run on Vista, but the time has come for my associates and I to upgrade our old computers to new desktop/laptop platforms, and I would hate to acquire XP machines and be stuck with them for the next 5 years. (Note: Since first posting this message, Oracle has certified Forms 10g Patch 3 (version 10.1.2.3.0) to run on Vista) So after another person informed me that he had Forms installed and running on Vista, I went ahead and bought one. I found that as long as I set the compatibility mode to run Forms programs as Windows XP (and a few other changes), Forms 6i and 10g run quite satisfactorily.
Update 29-Jan-2008: Unfortunately, it turns out that the Forms 10g Builder running on Vista had a major flaw: If you try to develop a form, the Builder will crash if you try to compile a procedure that calls another procedure in the form that has errors. The problem is reported and described in this thread: Error compiling a form under Vista
Update 12-Mar-2008: Installing Patch 3 on Vista does not help with this problem -- the Builder still crashes in the same situation.
Update 25-July-2008: Applying Patch 7047034 has corrected the problem. See this link within this thread: Forms 10g: Installing Patch 7047034 on Windows Vista
Webutil note: I am stuck in a Forms 6i client/server world, so all my forms must run in that environment. Therefore I have not used any Webutil software, and I do not know whether that part will run under Vista.
Internet Explorer note: On Windows Vista, IE CANNOT be used to run the Web Forms runtime. It crashes immediately when you try to run a form. Instead, I can use either Firefox (Firefox 2, Firefox 3.0 Crashes with Forms 10g) or Netscape, as long as they are set to disable java. [ Correction: IE7 on Vista now runs the Forms 10g forms. You just need to add "?config=jpi" to the browser URL when starting the Web Forms session. More IE/Vista info: [url=http://forums.oracle.com/forums/thread.jspa?threadID=642973]Vista JInitiator Problem ]
The Oracle Developer Suite download page:
http://www.oracle.com/technology/software/products/ids/index.html
Oracle Developer Suite Installation Guide:
http://download.oracle.com/docs/cd/B25016_07//doc/dl/core/B16012_04/toc.htm
The steps below are those I followed to install Forms 10g (version 10.1.2.0.2)
I. Preliminary system changes in Windows
When I started installing, I got the following error message: Install has encountered an error while
 attempting to verify your virtual memory settings.
 Please verify that the sum of the initial sizes of
 the paging files is at least 256 MB.To fix this: Go to Control Panel, System and Maintenance, View amount of RAM and processor speed (under "System"),
Advanced system settings (in left "Tasks" column), Advanced tab, Settings (under "performance"), Advanced tab:
Virtual Memory shows a "Total paging file size for all drives: 2337MB.
Click "change", Uncheck "Automatically manage paging file size for all drives"
Click "custom size:", set Initial size to: 2048, Max to 4096
Click set button, then OK, get message:The changes you have made require you to restart your computer before
 they can take effect.Restart the computer.
II. Installing Forms 10g
1. Download two files from Oracle:
ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
2a. Before extracting, it is a good idea to shut down any virus protection software. It can sometimes prevent some files from being created.
2b. Extract both into the C:\oracle directory, as disk1 and disk2.
3. Using Windows Explorer, change the properties of setup.exe in the C:\oracle\disk1 folder. (In windows explorer, right click, properties, Compatibility tab.) Change the compatibility to run as Windows XP (Service Pack 2).
4. Right click setup.exe and click "Run as administrator"
5. Select "Installation type" = Complete (1.11 GB)
6. Received this message:Windows Firewall has blocked this program from
accepting incoming network connections. If you
unblock this program, it will be unblocked on all
public networks that you connect to.
C:\users\steve\appdata\local\temp\orainstall...
2007-10-29_11-59-08am\jre\1.4.2\bin\javaw.exeI clicked "Unblock"
7. Received this message: "Provide outgoing mail server information" I entered the smtp mail server that I use.
8. A summary screen displayed showing 274 products under New Installations.
I clicked the Install button.
9. Received this message: You can find a log of this install session at:
C:\Program Files\Oracle\Inventory\logs\installActions2007.....log
10. The installation completed. Installed products shows Forms 10.1.2.0.2
III. After the install completed
1. Create a shortcut to the Forms 10 Builder on the Desktop.
On the shortcut line, after the .exe, add *userid=userxxx/pwxxx@orcl* so Builder automatically logs into 10g database. If you do step 4 below (creating an easily-accessible folder to use for your forms) change the "Start in" path on the shortcut so it points to that folder. Otherwise, Forms Builder will not find referenced objects and PLL libraries when it opens a form. Also do the same on the Start, All Programs shortcut for the Forms Builder.
Edit: After applying Patch 3, the following steps are not necessary.
Set its compatibility to Windows XP.
Set checkbox: "Run this program as as an administrator." (Without this, FormBuilder will NOT open a PLL library.)
Click the "Show settings for all users" and change values there.
2. Copy "Start OC4J Instance" icon to desktop.
Set its compatibility to Windows XP.
The first time it runs, I got a Windows popup to unblock program named Java. I clicked "Unblock".
3. tnsnames.ora:
Rename C:\oracle\DevSuiteHome_1\network\admin\tnsnames.ora
to: tnsnames_orig.ora
If you created a tnsnames.ora file for Forms 6i, just copy it to the path above. If not, do this:
Create a new tnsnames.ora file, copying entries old file on my old laptop, which contains all the connections I use.
Delete the old laptop entry, replace with new entry for the new local ORCL connection on new laptop from tnsnames file renamed from the c:\oracle\... ...\10.2.0\db_1\ path.
4. Optional: Create an easily accessible folder to store fmb files:
C:\users\steve\.1\fmb10
You don't really want to keep drilling into C:\oracle\DevSuiteHome_1\forms, and then find your .fmb file among the several dozen oracle-supplied files.
To create a folder named .1, you have to open a CMD.exe (Windows DOS) window, and type the Make Directory command:
MD .1
That will create the folder within the current directory -- mine defaults to C:\users\steve
Note: If you also need to use Forms 6i like me, DO NOT EVER open a .fmb file in the Forms 10 Builder from the Forms 6i folder. If you compile it, or even worse, save the .fmb, Forms 6i *cannot ever* access the file. Instead, always use the File Manager (Windows Explorer) to copy the fmb from the fmb6 folder into the fmb10 location.
5. Change the Forms 10g Default.env file using a text editor.
This file replaces all the settings originally written to the Windows Registry (GREAT idea, Oracle! I hate the registry.) No more Regedit. The default.env file is located at: (DevSuiteHome_1 path)\forms\server\default.env
Locate line with: FORMS_PATH= and add:
;C:\users\steve\.1\fmb10
Add a new line:
FORMS_MMAP=FALSE
The above allows compiling an fmx while the form is running.
Add a new line:
FORMS_ROWLOCK_OPTIMIZATION=FALSE
(This fixes Oracle bug number 3949854, which prevents automatic skipping if the same value is typed over another value. TAR 4806199.993 Automatic Skip failure...) See bug 4068896
Add a new Line:
FORMS_RESTRICT_ENTER_QUERY=False
This allows use of Query-Where window in enter query, after entering a colon in any input field. Without this, Forms returns FRM-40367: Invalid criteria in field nnn in example record. Oracle shut it down to prevent "sql injection" attacks.
6. Jiniator setup:
Run file jinit.exe in C:\oracle\DevSuiteHime_1\jinit\jinit.exe
It installs Jinitiator 1.3.1.22.
I installed it in C:\oracle\JInitiator 1.3.1.22\
For Firefox, make sure a copy of file \bin\NPJinit13122.dll resides in C:\Program Files\Mozilla Firefox\plugins.
For Netscape, the path is: C:\Program Files\Netscape\Navigator 9\plugins
7. Browser settings
See the note above about using Firefox 2 and not Firefox 3!
In Firefox 2 go to: Tools-> Options-> Content
Uncheck the "Enable Java" checkbox
--Firefox terminates if this is not done!
Note: After my system automatically installed updates to either java or Firefox, re-check the "Enable Java" setting. I am suspicious that one of these installs re-enables java in the browser.
Also note: some web sites cannot display properly if java is disabled. Example: U.S. time website: http://www.time.gov Use Internet Explorer to view these.
In Netscape make the same changes as Firefox. Without disabling java, it also terminates when you try to run a form.
Creating a url to use in the browser:
Try this:
http://127.0.0.1:8889/forms/frmservlet
If it does not work, change the 8889 port number as follows:
Open file: C:\oracle\DevSuiteHome_1\install\portlist.ini
Note the number in line:
Oracle Developer Suite HTTP port = 8889
Use the number as the port number.
You can also change the 127.0.0.1 to the computer name:
Control Panel, System and Maintenance, See the name of this computer (under "System"). Mine is "steve-PC"
So the alternate URL is: http://steve-PC:8889/forms/frmservlet
To try out the URL, start the OC4J instance set up above. Then start either Netscape or Firefox, and enter the URL. You should get a welcome screen.
If the above URL works, start up the Forms Builder, and open Edit, Preferences. On the General tab, uncheck the "Build before running" check box (optional). On the Runtime tab, set the "Application Server URL to the url above.
To run a real form, add this to the URL after frmservlet, (with no spaces):
?form={formname}&userid={userxxx}/{passwordyyy}@{connect-string}
but replace the parts in curly braces with the appropriate values. Example:
http://127.0.0.1:8889/forms/frmservlet?form=ABC&userid=abc123/zyx@orcl
Setting up Forms Builder to directly run a form in the browser:
Run the Forms Builder. Go to Edit, Preferences, Runtime tab.
Set the Application Server URL to:
http://127.0.0.1:8889/forms/frmservlet
(or use whatever URL string you developed above)
Set the Web Browser Location to:
"C:\Program Files\Netscape\Navigator 9\navigator.exe"
(or an equivalent to run the Firefox browser).
8. FORMSWEB.CFG file changes
The file is located at:
C:\ORA_DS_101202\DevSuiteHome_1\forms\server\formsweb.cfg
I changed the following two lines in the file, but these are my personal preferences:
separateFrame=true
lookandfeel=Generic
9. FMRWEB.RES file changes
For Oracle help: Enabling Key Mappings
The file fmrweb.res defines actions (triggers that run) when a function key is pressed while running Forms. The one released has unix-style key mapping, but I prefer keys originally mapped for Windows PC Forms users. There is a fmrpcweb.res in the same folder that can be renamed to fmrweb.res.
In the C:\oracle\DevSuiteHome_1\forms path, I renamed fmrweb.res to fmrweb_orig.res.
I have a file that I prefer to use, so I put it into the folder as fmrweb.res. The contents are listed below. It is organized so the most important keys are listed alphabetically at the top (URFD column is the sort column), followed by a group of less-important keys. These are keys that are available to users, but they either would not use, or are disabled within most forms. The URFD column in the second set starts with a hex A0 character, which is a high-order space, so collates after normal alphabetic characters. (Note: If you want to copy the text below and use it, the hex A0 character has been changed by the forum software to a space. So you would need to use a text editor with hexadecimal character capabilities to replace the space with the original character. )
My file has special keys defined for F2 (I use it for a debugging Key-F2 trigger in my forms), and a "Cursor to Home" F12 function. All the rest are pretty much the same as in the released fmrpcweb.res file, only mine are organized alphabetically on the URFD column.
The Web Forms fmrweb.res file is editable using any programming editor (NOT MS Word!!!). The old Client/Server key mapping file, fmrusw.res, could only be changed using the Oracle Terminal program (and it is a pain to use).
Here is the main part of my fmrweb.res file:#
#Jfn :Jmn: URKS :Ffn : URFD
# : : (User-readable : : (User-readable
# : : Key-sequence ) : : function description)
118 : 1 : "Shift F7" : 74 : "Clear Form"
121 : 0 : "F10" : 36 : "Commit"
117 : 0 : "F6" : 65 : "Create Record"
10 : 1 : "Shift Enter" : 82 : "Cursor to Home" # sdsu uses this
123 : 0 : "F12" : 82 : "Cursor to Home" # sdsu uses this
 #: --Alt+Home works, but leaves the Action (first
 #: --pull-down menu item) highlighted. Press Esc or
36 : 8 : "Alt Home, then Alt" : 82 : "Cursor to Home" #-- Alt again to clear highlight.
117 : 1 : "Shift F6" : 63 : "Delete Record"
119 : 0 : "F8" : 77 : "Execute Query"
120 : 0 : "F9" : 29 : "List of Values"
9 : 0 : "Tab" : 1 : "Next Field"
40 : 0 : "Down-Arrow" : 7 : "Next Record"
9 : 1 : "Shift Tab" : 2 : "Previous Field"
38 : 0 : "Up-Arrow" : 6 : "Previous Record"
112 : 0 : "F1" : 35 : "Show Keys"
116 : 1 : "Shift F5" : 69 : " Clear Block"
116 : 2 : "Ctrl F5" : 3 : " Clear Field"
113 : 1 : "Shift F2" : 80 : " Count Query Hits"
112 : 1 : "Shift F1" : 78 : " Display Error"
114 : 0 : "F3" : 73 : " Duplicate Item"
115 : 0 : "F4" : 64 : " Duplicate Record"
69 : 2 : "Ctrl E" : 22 : " Edit Field"
122 : 0 : "F11" : 75 : " Enter " # Causes validation, w/o cursor move
118 : 0 : "F7" : 76 : " Enter Query"
81 : 2 : "Ctrl Q" : 32 : " Exit"
112 : 2 : "Ctrl F1" : 30 : " Help"
34 : 0 : "Page Down" : 66 : " Next Set of Records"
119 : 1 : "Shift F8" : 79 : " Print"
10 : 0 : "Enter/Return key": 27: " Enter/Next Field"
33 : 0 : "Page Up" : 12 : " Scroll Up"
116 : 0 : "F5" : 87 : " F5 Key for special uses"
#121 : 3 : "Shift Ctrl F10" : 82 : " Function 0" #--disabled. Cursor to home defined above
112 : 3 : "Shift Ctrl F1" : 83 : " Function 1"
113 : 0 : "F2" : 84 : " Function 2"
113 : 11: "Ctrl Alt Shift F2":95: " List Tab Pages" #<-REQUIRED, or F2 cant be assigned
114 : 3 : "Shift Ctrl F3" : 85 : " Function 3"
115 : 3 : "Shift Ctrl F4" : 86 : " Function 4"
117 : 3 : "Shift Ctrl F6" : 88 : " Function 6"
118 : 3 : "Shift Ctrl F7" : 89 : " Function 7"
119 : 3 : "Shift Ctrl F8" : 90 : " Function 8"
120 : 3 : "Shift Ctrl F9" : 91 : " Function 9"Finding Forms 10g Patchsets
Here is how to do the search: Log into metalink ( https://metalink.oracle.com ), then click on the Patches & Updates tab, then Simple Search.
In "Search by", select Product or Family. Enter "Developer Forms" in the box.
Then click the Release choices, and select "iAS 10.1.2.3"
Patch Type should be "Patchset/Minipack"
Platform or Language should be "Microsoft Windows (32-bit)"
Click Go, and the Forms 10g patch should show up. As of July, 2008 the only one available is: [url=
https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=5983622&release=1710123&plat_lang=912P&patch_num_id=943599
]5983622
Edited 2008-12-12 to add a link to Oracle Note 559067.1 and added the fmrweb.res file listing.
Edited 2008-10-28 to change text format to work better within new forum format
Edited 2008-7-7 to add patchset search information.
Edited 2008-4-21 to modify information.
Edited 2008-3-6 to add information.
Edited 2008-5-29 to update information.

I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards

How to Close InfoPath Form After Submission When Two Buttons Exist?

I have an browser-enabled InfoPath 2010 form that has two views and a submit button on each view. The form would correctly submit and close the form using one button on the form until the second button was added. After adding the submit button on a second
view, the second button submitted/closed but the behavior on the first view changed so that the form no longer closes after submission. I’ve researched this and have not yet found a solution to allow closing the form after submission for one of the buttons.
Things I’ve tried:
- I’ve attempted creating multiple submit data connections for the different buttons
- Specifying different Submit Options
- Try closing the form with the code
- Add another button to the non-closing view
- Add duplicate Rule actions to "Close this form: No Prompt"
Settings:
Button rules:
- Submit using data connection: SharePoint Library Submit
- Close this form: No Prompt
Button Properties:
- Action > Rules and Custom Code
The form Submit Options:
- Send form to a single destination (a form library)
- Choose a data connection for submit (SharePoint library submit)
- Advanced > After Submit: Close the form
Advanced form options:
- Filler Features: all items unchecked (not allowing Save, etc.)
- E-Mail Attachments: uncheck Enable InfoPath e-mail form functionality for this form template
Resources:
When considering programmatically submitting and closing the form, I understand from this article that the Rules run before code and I can’t close the InfoPath form programmatically by writing code behind a button that has a rule set on it:
http://www.bizsupportonline.net/blog/2009/01/how-to-programmatically-run-code-close-infopath-web-form/
Discussion of creating a custom Save and Submit buttons for InfoPath browser forms:
http://markhaverty.com/sharepoint/custom-save-and-submit-buttons-for-infopath-browser-forms/

what if you need to switch views?
I have the same problem in a similar situation. I created a test button to narrow down the cause. the button submits data & closes the form fine. however when I add a rule to switch views before the submit & close rule, it
breaks. Submit still works but it no longer closes the form. If I disable the switch-view rule, then it closes fine.
I tried added another rule to switch back to the main view but that didn't help.
switching views is an integral part of the workflow b/c I want to email the alternate view upon approval & then close the form. So removing that rule is not a good answer unfortunately.

I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone,

I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone, but I cannot see any photos.   Thoughts?

We want to make sure we move your pictures to your computer schpee! Do you have a memory card on your phone? If your pictures are not on your http://vz.to/1OvJVey memory card we would want to move them. After you move them than try http://www.verizonwireless.com/support/knowledge-base-45147/ to move them to your computer. Keep us posted.   AmberF_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Benefit enrollment form...

Hi Experts,
I am working on the Benefits Enrollment Form (SPRO-> Personnel Management-> Benefits-> Flexible Administration-> Form setup->).
I am using Office Integration of word templates to set up the forms. Could someone guide me how do I populate the fields on it after I exported the template?
Also I am getting the below message when I am opening the form. Any idea what is the error?
"The macros in this project are disabled. Please refer to the online help or documentation of the host application to determine how to enable the macros."
Best Regards
Manas

Solved myself.

Can You Disable A PDF Form After X (days or openes)?

Is there any way to disable a PDF form after X # of days or X # of openes? Here's my situation:
I have a time sensitive document that needs to be filled it out and printed within 72 hours from receipt. After 72 hours the form is no longer valid and must be locked and disabled (meaning you can open it and see the contents anymore). Is there any simple solution?
* FYI, seems purchasing DRM is a bit too expensive for this application.
I have Adobe LiveCycle Designer and Acrobat Pro X.
Thanks for any help!

DRM - digital rights management. Controversial and complicated subject.
If you just want a password you can set that with Acrobat, but it has no expiry system. Expiry is a pretty complex area, for instance, it cannot trust the clock in the user's own computer, because they could change it to fool you. And if you count opens or whatever they can just start with a fresh copy. Adobe's DRM runs on a server 24/7, so that checks can be made whether to open or not.

Employee date change after pay roll run

HI sapiers,
i have an issue
one employee join on 10th of the may but in sysytem it was enterd as 13th of the may
and pay roll was processed to that employee
now can we change the employe join date now
if yes how can we do this
please help me its urrgent
thanks in advance
shjish khan

Hi Shajish,
There are three scenarios when you may need to change hiring date:
1) After payroll is run - when hiring date is before actual Hiring date.
2) After payroll is run when hiring date is after actual Hiring Date.
3) Before the payroll is run.
1) PA30 -- Copy actions info type - action type - incorrect entry -- save and come out PA 30 copy actions info type -- action type - correct entry - now correct your entries, save your date is changed.
2) PA30 - Utilities - change payroll status - delete accounted to field, save and come out - then again utilities change entry leaving date - correct the hiring date - save and come out.
3) PA30 - Utilities change entry/leaving date change your date and save.
Try this aslo
Go to PA30
Enter personnel number.
Select action infotype.
Select subtype hire mini master record.
Change to new date.
Under reasons, select new position.
Click save.
Please refer the below links:
http://help.sap.com/saphelp_470/helpdata/en/48/35c5c34abf11d18a0f0000e816ae6e/content.htm
http://help.sap.com/saphelp_470/helpdata/en/48/35c5c34abf11d18a0f0000e816ae6e/frameset.htm
http://help.sap.com/saphelp_46c/helpdata/en/1b/3e5c16470f11d295a100a0c9308b52/frameset.htm
Also we have several threads in the forum related to this.
http://scn.sap.com/thread/1185695
http://scn.sap.com/thread/1185695
http://scn.sap.com/thread/2012142
http://scn.sap.com/thread/1466306
Thanks,
Madhav

Modifying a 6i form in 9i and running in 6i

Hello all forum members,
I have a fmb created in forms 6i. I am modifying the visual aspects of the form in forms 9i. After saving the file in forms 9i, can I open it in forms 6i and compile & run in forms 6i? I would be grateful if someone replies to my query.

Hi
I'd say no: a 9i forms doesnt work with 6i runtime, but I never tried it. You can try it yourself. Make a copy of the 6i fmb, make your changes in 9i and make a fmx. Then try if it works with 6i runtime.

Config steps of Life plan for Domestic partner to appear in enrollment form

Hi All,
When we are trying to configure 'Insurance plan' for 'Domestic partner' , system does not display this option in the enrollment form. Where as the same kind of configuration is working perfectly for the dependant 'Spouse'. Please throw light on what all are the required config steps to pop up the 'Insurance plan for domestic partner' in enrollment form.
Here are some of config steps maintained.
- All basic settings
- Option 'Domestic partner' in Coverage variants & Cost variants
- Age as parameter grouping
- Dependant eligibility for subtype 'Domestic partner'.
Please let me know what config steps are required to give the domestic partner option..
Thanks a ton in advance
Sarvani

I just unchecked "Allow Multiple Selection" and the form worked normally. Is there a workaround so that I can save multiple values for one List Box object?

Launch workflow in user form after updating attributes

Hello,
When I launch a workflow in my activeSync user form, attributes are not updated if there are changes for the account.
I launch the worfklow as described below:
 <Field name='viewOptions.Process'>
 <Comments> Workflow</Comments>
 <Expansion>
 <s>DeleteAccounts</s>
 </Expansion>
 </Field>Is it possible in a first time to update attributes and then to launch the workflow ?
Thanks,
Nicolas

Are the attributes changing because of changes through role assignments? I think those changes happen during check-in. (Maybe in a reprovision, too: I haven't tried.)
My instructor said he has seen times after activeSync is run that, if you edit the user, additional attribute changes finally go through. He didn't elaborate on when it happens. I've seen it, but for reasons that aren't relevant in this discussions, I haven't had to deal with it yet.
Anyway, he recommended setting viewOptions.Process to something that does an extra check-out/in (or in/out?) to handle that situation. You might want to add a check-in/out to your workflow before you do your other processing...

Pre-loading Planning forms after re-start

Is there a way (or two) to mitigate the load time of a Planning form? We have 60+ forms and the application owners realize that once user1 opens a particular form, user2 benefits by the (WebLogic) application server's caching. The owners feel that user2's perceived performance of the forms load is acceptable, but user1's in not.
One of my recent on-site consultants recounted the story of a firm having an admin log into each form very early every morning to effect the caching for performance. Two obvious solutions would be the above (manual process) and using HP LoadRunner (which we do not have available to us in our production environment). Any WebLogic application server settings not used by default for EPM 11 deployed Planning apps applicable here?
Any suggestions, experiences or war stories on this would be very much appreciated.
-Vince

My Oracle Developer Version is Oracle Fusion Middleware 11g for windows and database Oracle 11g (11.1.0.6) for windows, i have tried it on Oracle 11gR2 for windows as well, but problem is same. I tell you little more in detail
After installation of Developer 11g , i run a test form , it was running fine in the browser with port 8090, then i re-start the computer , after that , form is compiled successfully, first it shows that http listener is not running, then i start services Weblogic WLS Forms, after that it does not show that http is not running, but it does not run form in browser.
I am tired , please help me , which services are required to run developer 11g , i have worked fine in Developer 10g with oc4j , but here i am not able to run the form.
Thnaks in advance.
Regards
Barkaat

Pop up enrollment form after teh action run

Similar Messages

Maybe you are looking for