Pop-up error messages when running a script?? make them go away!

v1.5.1, build 5440.
I've been running a development setup script for some months now.
It has errors in it, it creates synonyms or grants for objects that no longer exist. ( It's not been worth my time to correct it, because I just run it and ignore the errors for now. I'll tidy up when I'm building the installers.)
Suddenly, today, sql developer has decided to pop-up a message window to tell me about each error. I have to press ok for it to continue. On top of the annoyance factor that a task that took 5 seconds now takes 60, the message is totally useless because it doesn't tell me which object does not exist! In other words, I will still have to read the output log anyway!
I haven't changed any of my settings, though I did have to restore to an old version of my connections file when it got corrupted (again).
So, why/how did these messages decide to show up, and more importantly, how can I make them go away?

You could check with [http://help.yahoo.com/l/us/yahoo/helpcentral/ Yahoo Help] to see if other users have seen this problem with Yahoo Mail ... for example, I found [http://answers.yahoo.com/question/index?qid=20111027204141AANNBYY this] where a user had a similar problem that had to do with Messenger contacts:
Thanks for this. Follow-up: Found out 15' ago after a lot of clickety-click that you can mousey up to the upper left of the screen. Click "Options." If you see a "Messenger" option, then open that up and select "only my Contacts can message me." That seems to have gotten rid of "yummicrush698."
-----

Similar Messages

Error message when running MultiPageImporter script

Hello,
I had posted this in the Adobe forum, and it was suggested I move it over here.
I have a 300+ page document - original is 8.5x5.5.
I want to print it on 8.5x11 sheets - landscape - so two pages are on each sheet.
BUT - I want to have my two copies printed - and then cut the pages in half to end up with two full books...
So if I print two copies, I need page 1 and page 1 on the same side on the same page - page 2 twice on the back...
I was directed to a script download:
Actually an InDesign script makes it possible.
Create a new 8.5 x 11 document.
Install this script
http://indesignsecrets.com/downloads/MultiPageImporter2_5.zip
Run the script twice, changing the x offset 5.5 inches (relative to top left) for the second run.
I have downloaded the script and am trying to run it in InDesign CS6.
I get this error when I run:
Any suggestions as to how I can make this work?
Thanks !
Amber

Here is another way to do this, in case someone is interested: Open your PDF in Acrobat and go to tools> Pages> Extract pages as separate files. Put these pages in a folder and duplicate it. Open the duplicate folder, select all files and do a batch re-name, adding "a" at the end of the name (before the extension.pdf). I use the Mac plug-in "Path finder" for this, but I think you can also do it in Bridge, Grep, and probably other programs. Move the re-named files into the folder with your original extracted PDFs. When viewed by name, the file order should be 1,1a 2,2a 3,3a and so on. Open the last page in Acrobat and go to File> Tools> Insert from file> Shift select all of the pages (except the one you have open) and insert. I'm not sure why, but the pages will be added in reverse order. Save your new PDF. Make a one page InDesign file at 5.5x8.5 (facing pages) and use the Place multipage PDF script to add your PDF. Export to spread pages. If you don't want to print in reverse order, I think most printers have a reverse order option, there are also scripts available to reverse the order of PDFs, or you can use this web too:
Reverse PDF Page Order

Getting error message when running a script to make an .doc attachment open

This script:
var cPath = "|" + this.path + "|U:\uFEFF" + this.dataObjects[1].name;
app.openDoc(cPath);
Open PDFs fine but when I try to open a docx document I get an error message:
NotAllowedError: Security Settings prevent access to this property or method.

When trying to open a non-PDF file, you must specify to use a converter, by
setting the parameter bUseConv to true (which can only be done in a
privileged context). Also, I'm not familiar with this type of path... Are
you using this to open a file attached to the active PDF? Does it work?
Have a looked at the openDataObject-method of the Document object? It is
meant to launch PDF attachments of a file (but it can't be used for any
other file format).

Error Message when running BI Publisher

Hi-
Getting the following error message when running a custom report, report has been defined but still getting the error message in HCM 9.2 with PeopleTools 8.53
Template definition MAC_CONF_STM not found in the report definition. (235,2012) PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:GetTemplate PCPC:15048 Statement:325
Called from:PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:GetTemplateRuntime Statement:1778
Called from:PSXP_RPTDEFNMANAGER.ReportDefn.OnExecute Name:ProcessReport Statement:1115
Called from:BA_VALIDATION.ConfirmStmtPrint.OnExecute Name:PrintConfirmStmt Statement:53
Called from:W3EB_ENR_SUMMARY.GBL.W3EB_ENR_PB_WRK.ODEM_CONF_STMT_PB.FieldChange Statement:2
Any idea regarding the error message
Regards,
MACD

Did your custom report ever ran successfully in the environment you are getting the error.
Most of the time not all the report definition and associated definitions are migrated to the next environment.
Have a look at following doc:
E-BI/XMLP: How To Migrate BI/XML Publisher File Definition Objects? (Doc ID 659919.1)

Error message when running the FSPCCURR - PS/Fin MultiCurrency Process

error message when running the FSPCCURR - PS/Fin MultiCurrency Process
=====================================================
2011-03-21-17.21.39.660000 INFO(5870,1) PI(785156) Program(FSPCGLMC) GL MultiCurrency processing has begun.
2011-03-21-17.21.40.820000 INFO(5870,4) PI(785156) Program(FSPCSTEP) Beginning processing, Step CURPER in Group NONREVAL for Business Unit NAMER.
2011-03-21-17.30.14.520000 INFO(5870,4) PI(785156) Program(FSPCSTEP) Beginning processing, Step USD_USD in Group NONREVAL for Business Unit NAMER.
2011-03-21-17.30.53.000000 SEVERE ERROR IN PGM:(5870,58) PI(785156) Program(FSPCPROC) Edit journal fails for Business Unit NAMER and Step USD_USD.

Hi 841037,
We are facing this same issue in our environment. We are on FSCM 9.1 bundle #24.Please let me know how you resolved this issue at your end. Any help or pointers regarding this issue is highly appreciated. Thanks.

Error message when running form

hi everybody,
im getting this error message when running a simple form.
Positional Parameter after key command line.
Can anyone please help.
thnk u

Check the path to your form. Forms does not like spaces in the path or fmx filename, but the error doesn't explain the problem at all!

I get an error message when running a back-up from my Macbook Pro: The backup disk image Macbook.sparsebundle could not be accessed (error-1) and the backup did not complete? What is the issue?

I get an error message when running a back-up from my Macbook Pro: The backup disk image Macbook.sparsebundle could not be accessed (error-1) and the backup did not complete? What is the issue?

Try Here > http://pondini.org/TM/C12.html
More Info here > http://pondini.org/TM/Time_Capsule.html

Receiving Error Message when running sh rep_populate.sh

Following directions at http://www.oracle.com/technology/tech/linux/htdocs/yum-repository-setup.html
Receiving Error Message when running sh rep_populate.sh trying to create local yum repositories and configure up2date and yum to install and update packages from them.
THIS PROGRAM IS DEPRECATED!
You should be generating xml metadata instead.
Please see http://linux.duke.edu/metadata
After executing following instructions and replacing server name with our server name.smmj.com
Client Setup
1. Import the GPG key
rpm --import /usr/share/rhn/RPM-GPG-KEY
2. Configure up2date to use the yum repository. Edit /etc/sysconfig/rhn/sources. Comment out line
up2date default
to
#up2date default
and add the following lines. Replace <repository_server> with the hostname of the machine that is hosting the yum repository. Comment and uncomment individual repositories as needed.
Enterprise Linux 5
(commented uncommented)yum el5_$ARCH_latest http://<repository_server>/yum/EnterpriseLinux/EL5/latest/$ARCH/
(commented uncommented)yum el5_$ARCH_addons http://<repository_server>/yum/EnterpriseLinux/EL5/addons/$ARCH/
#yum el5_$ARCH_oracle http://<repository_server>/yum/EnterpriseLinux/EL5/oracle/$ARCH/
#yum el5_ga_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/ga/base/$ARCH/
#yum el5_u1_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/1/base/$ARCH/
#yum el5_u2_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/2/base/$ARCH/
#yum el5_u3_$ARCH_base http://<repository_server>/yum/EnterpriseLinux/EL5/3/base/$ARCH/
#yum el5_ga_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/ga/patch/$ARCH/
#yum el5_u1_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/1/patch/$ARCH/
#yum el5_u2_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/2/patch/$ARCH/
#yum el5_u3_$ARCH_patch http://<repository_server>/yum/EnterpriseLinux/EL5/3/patch/$ARCH/
and running additional instructions
2. Run up2date to install python-urlgrabber.
up2date -i python-urlgrabber
Receiving following error
There was some sort of I/O error: <urlopen error (-2, 'Name or service not known')>
Further when trying to replace /etc/yum.repos.d/ULN-Base.repo ULN-Base.repo unable to find file, file that is there
is called public-yum-el5.repo
Made following changes in that file
Enterprise Linux 5
[el5_latest]
name=Enterprise Linux $releasever - $basearch - latest
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/latest/$basearch/
gpgcheck=1
enabled=1
[el5_addons]
name=Enterprise Linux $releasever - $basearch - addons
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/addons/$basearch/
gpgcheck=1
enabled=0
[el5_oracle]
name=Enterprise Linux $releasever - $basearch - oracle
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/oracle/$basearch/
gpgcheck=1
enabled=0
[el5_ga_base]
name=Enterprise Linux $releasever GA - $basearch - base
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/ga/base/$basearch/
gpgcheck=1
enabled=0
[el5_u1_base]
name=Enterprise Linux $releasever U1 - $basearch - base
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/1/base/$basearch/
gpgcheck=1
enabled=0
[el5_u2_base]
name=Enterprise Linux $releasever U2 - $basearch - base
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/2/base/$basearch/
gpgcheck=1
enabled=0
[el5_u3_base]
name=Enterprise Linux $releasever U3 - $basearch - base
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/3/base/$basearch/
gpgcheck=1
enabled=0
[el5_ga_patch]
name=Enterprise Linux $releasever GA - $basearch - patch
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/ga/patch/$basearch/
gpgcheck=1
enabled=0
[el5_u1_patch]
name=Enterprise Linux $releasever U1 - $basearch - patch
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/1/patch/$basearch/
gpgcheck=1
enabled=0
[el5_u2_patch]
name=Enterprise Linux $releasever U2 - $basearch - patch
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/2/patch/$basearch/
gpgcheck=1
enabled=0
[el5_u3_patch]
name=Enterprise Linux $releasever U3 - $basearch - patch
baseurl=http://<repository_server>/yum/EnterpriseLinux/EL5/3/patch/$basearch/
gpgcheck=1
enabled=0
Then ran following commands
up2date -u
Output
There was some sort of I/O error: <urlopen error (-2, 'Name or service not known')>
yum update
http://<ice.smmj.com>/yum/EnterpriseLinux/EL5/addons/x86_64/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')>
Trying other mirror.
http://<ice.smmj.com>/yum/EnterpriseLinux/EL5/latest/x86_64/repodata/repomd.xml: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')>
Trying other mirror.
Error: Cannot retrieve repository metadata (repomd.xml) for repository: el5_latest. Please verify its path and try again
We would like a simple and correct way of doing this or we will be forced to switch to another os and another provider
Thanks, for your help

We purchased Licensed version of Red Hat Linux Oracle for our network server. My boss wanted a simple way of installing Samba on it so that the server can be used for file and printer sharing. We have an active directory on our network and couple of other Windows servers as well as other Red Hat servers. He wants to install Samba on that licensed version so that it can primarily be used for file storage and sharing, he wants to be able to connect with gui type interface to this server from windows machines and linux machines and he wants for this Red Hat Linux Oracle machine to show up in active directory.
Aparently when we went to Applications, Add Remove Software in Red Hat Fedora Samba was not in there.
When we go to System, Administration, Server Settings, Services, Samba is also not there.
Nowhere can we find an easy way of installing samba on this Linux OS.
I went to your site, signed in, (previously there was only 1 channel available there, I have just recently found and added all the channels that were aplicable to our system) and downloading them now to another version of the same type of Licensed Red Hat Linux Oracle. Hopefully when I use Software Updater in System Tools it will load the packages we are loking for (from the channels I selected on your website). Once that is done I think I could just go to add remove software and install the packages that I need from there.
I am still not sure why I set out to install repositories on this version of Linux, perhaps I mistakenly thought that once everything is installed (according to directions at http://www.oracle.com/technology/tech/linux/htdocs/yum-repository-setup.html) on the machine in question I would be able to use that same machine to get the packages for that same machine. We were in such a rush and desperate to put the server on to the network it did not dawn on me that this scenario is designed to have one serve on the network that holds repositories and other machines connect to it for packages.
I think I am on the right track in my logic, log in to your site with the CSI number, user name and password, select ALL the channels versus only one, save the search, then from the machine update packages, then add new software and Samba Should be in there. I would like to hear your thoughts on this.
This version of Linux seem like a very reliable version of OS and I would hate to give up on it, especially since we already bought licenses for it, its just that we don't have that much experience with it and I would upreciate all the info that you can give us for it. I am sure that everyone at SMMJ will upreciate you for it.

Error message when running Transaction Code = ME84

hi,
i am getting an error message when running Transaction Code = ME84
Error is 'No processing (error message P5 017), No data for chosen selection'
can someone please guide me on this ?

Hi Mahendra,
There are several reasons for the release not happeneing.
1. The issue could be in the selection of release type
2. Scope of selection
3. Strategy profile
Please check whether the selection parameters are considered are right for release to happen.
Regards,
Harish

Error message when run a query

I got an error message when I run one of the query on the portal:
Root Cause
The initial exception that caused the request to fail was:
Termination message sent
INFO
No connection to system BI_SAP_QUERY available
com.sap.ip.bi.shared.SharedText system_not_found
BI_SAP_QUERY
No connection to system BI_SAP_QUERY available
com.sap.ip.bi.shared.SharedText system_not_found
BI_SAP_QUERY
ABEND BRAIN (892): 1 SIDs from characteristic USITM are missing (CL_RSDM_READ_MASTER_DATA->_SIDVAL_DIRECT_READ2)
MSGV1: 1
MSGV2: USITM
MSGV3: CL_RSDM_READ_MASTER_DATA->_SIDVAL_DIRECT_READ2
What problem is this? How to fix it? Thanks in advance!

Hi Zheng,
Import Support Package 04 for Release 3.50 (BW3.50 Patch 04 or SAPKW35004) into your BW system. The Support Package will be available when note 0693494 with the short text "SAPBWNews BW 3.50 Support Package 04", describing this Support Package in more detail, is released for customers.
Regards,
Anil

Error message when running updates

I keep getting an error message when updating my CS programs. "This update from the internet cannot be completed. Please try again later."
I bought a Canon 6D and the Adobe Camera Raw won't work because it isn't the latest version and that it needs the latest PS version to run the latest Raw version and I can't get either update. Help?

Cameras by ACR version: Camera Raw plug-in | Supported cameras
Programs by ACR version: Camera Raw-compatible Adobe applications
You should be able to update CS5 without getting an error which is ostensibly what this thread is about, but you are correct in needing CS6 to use ACR 7.3 which is the minimum version of ACR that supports the 6D natively. You can use the DNG Converter to make DNGs that the older ACR will read, but that has nothing to do with images already processed in LR, because LR knows newer adjustments than your CS5's ACR 6 does.
To go from LR to PS you'll need to use Edit In PS CS5 and when you see the message about ACR being too old, choose Render using LR Adjustments and Don't Ask Again if that is also an option. This will cause LR to render a TIF or PSD (whatever you've chosen in the External Editing area of LR Preferences). If you don't see a message about ACR being too old because you've selected Don't Ask Again previously then you can click the Reset Warning Dialogs button in Preferences and get a chance to answer the question differently if need be.

I get a pop-up error message when I try to open Firefox

Whenever I try to open Firefox (latest version installed today), I get a pop-up error message that reads: TypeError: Componentsclasses['@mozilla.org/gmailnotifier;'] is undefined.
When I click the OK button, Firefox opens and operates fine. How do I get rid of that?

Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Check and tell if its working.

Getting an error message while running FX script logic

We are getting the following error message, while running the FX script logic - RUN_LOGIC:MDX statement error:"Value (Entity value) for characteristic /CPMB/U8D5FIT". Any help is truly appreciated. We are using the standard FX logic scrip *RUN_PROGRAM CURR_CONVERSION

Hi,
Hope all the required currency configuration settings are followed in Entity, Input currency, Category, Account correctly. Also reporting currency indicates the right reporting currency with the 'Reporting' propert set to 'Y' to the currency that you want to report in.
For the period that you are running the currency trans, could you also maintain rates for the reporting currency as 1.
Check your rate data. And please post your currency conversion script here.
Thanks,
Sreeni

Error message when running Business rules

Hello,
We are having the following error message when launching the business rules; cannot calculate - analytic server error (1013131): Failed to start Asynchonous thread. When looking att he Essabse log, we find the following errors around the same time we got this error:
[Wed May 06 22:01:45 2009]Local/ESSBASE0///Info(1051037)
Logging out user [brlpo], active for 63 minutes
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Info(1051001)
Received client request: Get Substitution Variable (from user [essbaseadmin])
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Error(1051083)
Substitution variable AOP.Finance.CurrFcst does not exist
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Warning(1051003)
Error 1051083 processing request [Get Substitution Variable] - disconnecting
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Info(1051001)
Received client request: Get Substitution Variable (from user [essbaseadmin])
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Info(1051001)
Received client request: Get Substitution Variable (from user [essbaseadmin])
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Error(1051083)
Substitution variable AOP.Finance.Curryr does not exist
[Wed May 06 22:02:45 2009]Local/ESSBASE0///Warning(1051003)
Error 1051083 processing request [Get Substitution Variable] - disconnecting
Would you have an idea of reason of error code?
Thierry

Hi,
Looks like the substitution variables its looking for are missing.
Can you check that?
Regards,
Amol

Error message when running script via package

Hi there,
I have a problem I can't understand - I am running a script from a package, and I get this error message:
CopyCatFinanceError
Invalid dimension ALL_FCSTPRICING in Lookup rule
where CopyCatFinance is the name of the package, and ALL_FCSTPRICING is the name of a parent in the Category dimension.
I don't understand why this member is being flagged as a DIMENSION, when it is only a member. And I don't understand why this is being flagged at all - this dimension has been reprocessed, as has the application (in fact, all the applications), the script has been re-validated and a full Optimise has been run several times...
I am now out of ideas! Any thoughts?
We are running BPC for MS 7.0 sp 7, on SQL 2005.
Thanks a lot,
Jason
PS. And there are no lookups in this script either - I'm referencing the category dimension with the %CATEGORY_SET% variable as the user selects this at runtime.

Can you post your logic, also check your lgx files are making sense.

Pop-up error messages when running a script?? make them go away!

Similar Messages

Maybe you are looking for