Pop up for position vacancy

Hi,
When I do a separation action, I am not getting the pop up which we usually get for creating a vacancy for the Position. What could be the reason ?
Should we also get a pop up for Promotion action ?
Regards
Vijay
Edited by: Vijay Sundaresan on Oct 14, 2010 10:23 AM

Hi Vijay,
Please make sure that no other personnel is assigned to the same position.
Regards,
Dilek

Similar Messages

  • Office Communicator window keeps popping up for no reason

    Has anyone seen an issue with Communicator (Office 2010) popping up from a minimized position for no reason.  The user is running Windows 7 and keeps Communicator minimized.  But the window pops up for no apparent reason throughout the day and
    the user is not receiving a message from anyone.
    If anyone has a solution, I would greatly appreciate it.  Thanks very much. 

    Hi,
    Please go to Control Panel -> Programs and Features to repair the Installation of Office, check if the issue persists.
    If the issue still exists, I suggest you perform a clean boot to determine whether background programs are interfering with Communicator:
    http://support.microsoft.com/kb/929135
    I hope the information is helpful.
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • "This message cannot be sent at this time."  I have been getting this pop-up for 3 days when trying to send out mail.  I don't know what to do!  I cannot send mail from this account on any ISP. Please help!

    "This message cannot be sent at this time."  I have been getting this pop-up for 3 days when trying to send out mail.  I don't know what to do!  I cannot send mail from this account on any ISP. Please help!

    lots of people seem to be havgin a problem sending email from iCloud webmail.
    does your email address have uppercase characters in it?
    if so, try creating an alias in lowercase (go to preferences in iCloud webmail and select 'accounts') and see if email sends okay from that

  • "Are you sure you want to shut down your computer?" prompt pops up for no reason and continues to pop up after selecting Cancel. How can I stop this?

    "Are you sure you want to shut down your computer?" prompt pops up for no reason and continues to pop up after selecting Cancel. How can I stop this?
    Mac Pro. OS 10.6.8

    Then I suggest you read this thread regarding the 30" Apple Cinema Display and that particular message pop up... several possible causes... common denominator, the display.
    http://forums.macrumors.com/showthread.php?t=617367

  • URGENT:  Not seeing the variable Pop-up for Button , on web template in WAD

    Hi gurus,
    In IP I have a standard plan function for 'Copy', which has a few variables defined on the funciton itself (as to be changed):
    Version from:
    Version to:
    Order from:
    Order To:
    Fiscal year from:
    Fiscal year to:
    All of the above variable are created with the following parameters:
    Variable input: Optional (have also tried madantory)
    Ready for input: is flagged.
    Variable represents: Single value.
    No default entry.
    No personalized data.
    Now in WAD, I create a button group for this function by selecting the Command, 'Executing Planning Function (simple)', manually entering my plan function technical name next to 'Command specific parameters', and selecting the dataprovider created for the filter I created in IP, and finally flagging the 'Display variable' button.
    The problem is, on the web template the variable screen does not appear when I click on the function button. It executes the function in the background without giving me the pop-up for variable selection. And obviously since the variables have no default values, nothing is processesed.
    I've tried this with planning sequence instead, and still wont give me the variable pop-up screen..
    I've actually explicitlet entered the variables on the 'Parameters for Command screen', the same screen where you enter the filter for databinding and well as the function.
    It still wont work (no variable pop-up screen).
    Is this issue related to the support pack. We're on SP12 right now?
    If not, do any of you gurus have any ideas? Big points will be rewarded for this.
    Thanks

    In the parameterization of the command, there is an option 'show variable screen'. I am not sure if you have mentioned this clearly, but have you checked this option?

  • I am trying to set up icloud on my iphone when i go to settings icloud it says verifying and a box pops up for me to sign in with my apple id but that has my old apple id on it. help??

    i am trying to set up icloud on my iphone when i go to settings icloud it says verifying and a box pops up for me to sign in with my apple id but that has my old apple id on it. help??

    Have you already verified your "new" email address? If not then please check your inbox for a confirmation email (also the junk folder). If you do not have a confirmation email then please sign in at https://appleid.apple.com and press "verify" for confirming your email address.

  • Kgepop: no error frame to pop to for error 600

    I am getting this error while running form in Forms6i on RHEL 4. Whenever a system error message is occuring I am getting this message and the the form closes. Please help.

    In metalink and search about that error.
    They have some patches for that based on your OS and Oracel Version
    Kgepop: No Error Frame To Pop To For Error 600
    https://metalink2.oracle.com/metalink/plsql/f?p=130:14:2686801411769804669::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,281648.1,1,1,0,helvetica

  • Error in Pre-Pop Adapter for AD using ResourceObjectDefinition Mapping

    Hi
    I have a PRe-pop adapter for Org name in AD -
    One of the variables is ResourceObjectDefintion. However OIM is not able to map it to the right object name and throws the below error -
    cAdapterDataMap/getResourceObjectInfo encounter some problems: Error retrieving user info: Object Name
    Class/Method: tcAdapterDataMap/getResourceObjectInfo encounter some problems: Column 'AD XXX' not found
    com.thortech.xl.dataaccess.tcDataSetException: Column 'AD XXX' not found
         at com.thortech.xl.dataaccess.tcDataSet.getColumnIndex(Unknown Source)
         at com.thortech.xl.dataaccess.tcDataSet.getDataType(Unknown Source)
         at com.thortech.xl.dataobj.util.tcAdapterDataMap.getProcessResourceObjectInfo(Unknown Source)
         at com.thortech.xl.dataobj.util.*tcAdapterDataMap.getResourceObjectInfo*(Unknown Source)
         at com.thortech.xl.dataobj.rulegenerators.tcBaseRuleGenerator.getRunTimeValue(Unknown Source)
         at com.thortech.xl.dataobj.rulegenerators.adpADPOPULATEMANAGEROU.implementation(adpADPOPULATEMANAGEROU.java:56)
         at com.thortech.xl.dataobj.rulegenerators.tcBaseRuleGenerator.run(Unknown Source)
         at com.thortech.xl.dataobj.rulegenerators.tcAdapterExecuter.executeRuleGenerators(Unknown Source)
         at com.thortech.xl.dataobj.util.tcPrePopulateUtility.setDataFromAdapter(Unknown Source)
         at com.thortech.xl.dataobj.util.tcPrePopulateUtility.prePopulate(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.prepopulateProcessForm(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.prepopulateProcessForm(Unknown Source)
         at com.thortech.xl.ejb.beans.tcFormInstanceOperationsSession.prepopulateProcessForm(Unknown Source)
         at com.thortech.xl.ejb.interfaces.EJSRemoteStatelesstcFormInstanceOperations_3fa3c79b.prepopulateProcessForm(Unknown Source)
         at com.thortech.xl.ejb.interfaces._tcFormInstanceOperations_Stub.prepopulateProcessForm(_tcFormInstanceOperations_Stub.java:1963)
         at Thor.API.Operations.tcFormInstanceOperationsClient.prepopulateProcessForm(Unknown Source)
    at com.thortech.xl.dataobj.util.tcAdapterDataMap.getResourceObjectInfo(Unknown Source)
         at com.thortech.xl.dataobj.rulegenerators.tcBaseRuleGenerator.getRunTimeValue(Unknown Source)
         at com.thortech.xl.dataobj.rulegenerators.adpADPOPULATEMANAGEROU.implementation(adpADPOPULATEMANAGEROU.java:56)
         at com.thortech.xl.dataobj.rulegenerators.tcBaseRuleGenerator.run(Unknown Source)
         at com.thortech.xl.dataobj.rulegenerators.tcAdapterExecuter.executeRuleGenerators(Unknown Source)
         at com.thortech.xl.dataobj.util.tcPrePopulateUtility.setDataFromAdapter(Unknown Source)
         at com.thortech.xl.dataobj.util.tcPrePopulateUtility.prePopulate(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.prepopulateProcessForm(Unknown Source)
         at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.prepopulateProcessForm(Unknown Source)
         at com.thortech.xl.ejb.beans.tcFormInstanceOperationsSession.prepopulateProcessForm(Unknown Source)
         at com.thortech.xl.ejb.interfaces.EJSRemoteStatelesstcFormInstanceOperations_3fa3c79b.prepopulateProcessForm(Unknown Source)
         at com.thortech.xl.ejb.interfaces._tcFormInstanceOperations_Stub.prepopulateProcessForm(_tcFormInstanceOperations_Stub.java:1963)
         at Thor.API.Operations.tcFormInstanceOperationsClient.prepopulateProcessForm(Unknown Source)
    Thanks

    - Verify that the AD XXX RO exists in the system , if its there , then re do the mappings once more .
    I did the same and it worked for me
    Thanks
    Suren

  • Photoshop CS4 Help Window Pops Up For No Reason

    This same thing was happening in Photoshop CS3 and I could never figure out why. I figured that since CS4 was coming out, I would buy it, stop using CS3 and the problem would be solved, well it's not. So far, I'm happy with the new program but for some reason, out of nowhere, while working on a photo, the Photoshop Help window (which opens as a web browser window) will pop up for no reason! Today, it popped up over 6 or 7 times and I nearly had to crash the program to get it to stop. I figured this problem would have been solved with the new version since the same thing was happening in CS3 but it hasn't. I'm running a Windows XP-based machine that I built myself about 2 years ago. I have a 512mb ATI Raedon X1650 video card and have 4GB of RAM so this machine has far more than enough power to run the program. I updated my video and mouse drivers prior to installing the program. Anyone else have this problem?

    Thanks for pointing that out. It really happens very rarely, but when it happens, it's quite a huge annoyance.
    Well I have about 3,5GB RAM on a Windows Vista 32 Bit system (hence just 3,5 instead of the full 4GB), with the OpenGL options activated, and maybe over 100GB of free HD space (that'll never be a problem, but since swapping is not used by all modules, I often bump into RAM problems when using tools like auto-aligning layers or stitching panoramas) and 2,5Ghz core duo on a notebook. The Windows swap file is also "just" 4GB...but I found more than 4GB to be a bit extreme.
    RAM usage is set to 56% right now (916MB), cache levels is set to 6
    After restart, everything runs fine again, I hope the help screens leave me alone.
    I didn't know this is since v. 7! I worked with all versions since 5.0 and since becoming a freelancer also bought every version since 6.0 except 7. I only experienced this bug in this and the previous version. Maybe my hardware doesn't keep pace with PS anymore

  • Pop-ups for parameter value insertion don't appear

    Hi,
    I am using Web Intelligence for creating a report that allows custom parameter values to be inserted via pop-up.
    The problem is such pop-ups for parameter value insertion don't appear on the various web browsers I make use of.
    (I.E. versioni, Firefox versioni)
    Any idea on how to solve such issue?
    thanks in advance,
    SC

    I suppose that you mean query prompts, that are parameters that are asked to the user in order to filter the data.
    Which version of BOE are you using?. If you are using BOE XI R2, that problem happens when you use Java 1.6 (only when editing the document), you should use Java <=1.5 (you can check the error in the java console while you execute the report).
    I think that problem was solved in a SP (not sure which SP solves this ¿SP4?)

  • The sound effects volume is all the way down. It pops on for a second, then disappears. I can't find it in settings.   How do I get the sound back?

    The sound effects volume is all the way down.  It pops up for a second once in awhile and then disappears. I can't find it in the Setting.  Music sound plays fine, but no sound on my apps.  Any idea how to fix it?

    If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • After specifying the external host name under outlook anywhere, users pop up for password

    Dear All,
    I have installed and configured exchange 2013 as a fresh installation on server 2012 and it worked fine till i changed
    specifying the external host name under outlook anywhere(in exchange ECP -> Server -> server -> W12R2-Email2013).
    My internal domain is starnavigator.lk and we have several accepted domains listed. but all the staff checked web mail through
    mail.leoburnett.lk internally and externally. even now web mail is working fine.
    After i added external host name as mail.leoburnett.lk
    all the internal PCs start to pop up for user name and password and its not  connecting. 
    even if I reversed back the settings, still prompt for user name and password. also auto discover cant locate the settings. if i configure the settings manually, i t works for first time and after restarting outlook, again prompt for name and password.Any
    any advice or solution please??
    Thx,
    Dulana

    Run this tool and post the result (only errors)
    https://testconnectivity.microsoft.com/
    After configuring outlook manually, run Test E-Mail Autoconfiguration and Connection Status and post the result.
    Editing just an URL for OA shouldn't cause any issue.
    Did you restarted IIS Service?
    Cheers,
    Gulab Prasad
    Technology Consultant
    Blog:
    http://www.exchangeranger.com    Twitter:
      LinkedIn:
       Check out CodeTwo’s tools for Exchange admins
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Open comment pop-ups for highlighted text (on Adobe Reader for Android)

    On my computer, I use the software Docear which allows to import highlighted text and comments from pdf documents. This function in Docear only works, if the reader copies highlighted text into the comment fields at the moment of highlighting. When using a reader on a PC, the settngs can be adjusted in order that this works. (Preferences>Commenting>Automatically open comment pop-ups for comments other than notes).
    It would be very practical for me to do this on my tablet (Android). However, as far as I know, this is not possible in the Adobe Reader for Android. Or is there any possibility to do this? If not,would it be possible to include this on a wishlist?

    Hi,
    This functionality is not available for Adobe Reader on Android. However, we have made a note of the same and shall try to incorporate it in one of our future releases.
    Thanks,
    Adobe Reader Team

  • Multiple system maintenance cycles are not shown in pop up for selection

    Hi,
    In change manager, when we create a change document from a change request, we dont get a pop up for selection of maintenance cycles with multiple systems in it.
    The change document is getting created by taking the only available maintenance cycle with only that system.
    Is there any configuration for this?
    Regards,
    Dipti Sawarkar.

    Hi Christian,
    Thanks for your reply.
    I know the pop up will come only when there is more than one maintenance cycles for that production system.
    I have done configuration for Normal correction.( SDMJ) and customized it (ZDMJ).
    When I try to create a CD* from CR* for a particular production system ( CCP) , it just takes up a maintenance cycle for CCP system and doesnt show up any pop for selection of maint cycles whereas I have created 5 maintenance cycles for this system CCP.
    The other 4 maintenance cycles have multiple landscapes (CCP and EAP )in it whereas this one (which gets selected by default) just has CCP landscape in it.
    The strange part is that when I try to create a stand alone CD ( without CR ) , it will give that pop up showing all 5 maint cycles. But this is not happening when I create a CD from a CR.
    I have never done/ seen configuration for the pop up of selecting maint cycles in ChaRM.
    Looking forward to ur help,
    ( *CD - Change Document  and * CR - Change Request)
    Regards,
    Dipti Sawarkar.

  • Nokia E6 Searching for position / Waiting for GPS ...

    I have a new nokia E6-00 with Symbian Anna (1 month old). I am very frustrated with the in-built GPS (Ovi Maps). It is working fine when it is connected to a Wi-Fi network, but when in OFFLINE mode it can not locate any satellites. It keeps displaying "searching for position" and "waiting for GPS". What should I do?
    Note: I have only checked Assisted GPS and Integrated GPS as positioning methods because I do NOT want any internet traffic caused by Ovi Maps.

    Hello there,
    I am writing because I am also having similar GPS difficulty with my E6-00.
    Here are the proper problem description and some background info:
    - for the past year, I had been using the C6-00. Its then Ovi Map was awesome, worked great in Asia, US, EU.
    - and before that, I also had the E71 for 2yrs. Again, Ovi Map served well.
    - Both phones only required their built-in GPS to navigate either walking or driving (with "offline" and "mobile data off")
    Now the problem with E6:
    - When "offline" or "mobile data" is off, the GPS simply wont function AT ALL. Like OP said, it gets disconnected soon afterwards. My question is, this is intended for E6? In comparison, the result in E6 seemed like a huge flaw.
    - Navigation / Positioning also seem "messed up". I am in Taiwan, Map version v0.2.43.11. I did a test: I launched both Nokia Map and Google Map on E6. Google map was accurate, showing exactly where I am, but Nokia Map was offset for 500 meters!! This made navigation IMPOSSIBLE!
    Map versions:
    - C6: 0.2.46.103
    - E6: 0.2.43.11 (cannot be further updated)
    Any advice is appreciated. Thank you.

Maybe you are looking for