Pop-up menus and frames

A web page with Fireworks 8 Javascript (not CSS) pop-up menus
imported into Dreamweaver 8 works fine on its own. However, if I
include the page in a frameset, the menus
appear to work OK (e.g. everything pops up and down when
expected, all the rollover transitions appear flawless, and the
pop-ups are well clear of the frame boundary), but when a popped up
menu item is selected,
nothing happens - the top-level menu items are the only ones
which still navigate to their links.
(I normally avoid using framesets, but the frameset in this
instance has a useful applications function and I would be loth to
remove it)

Hi Max:
Did you define a target for your pop-up menu links? See:
http://www.adobe.com/devnet/studio/articles/fwmx_popup03.html
Also make sure that the paths in the links are valid URLs.
It would seem strange that nothing is happening. How do the
menus work
when you browse the Fireworks HTML directly outside the
frameset? This
might give us a clue as to what's happening.
enthusiastically,
mark haynes
webassist sales
http://www.webassist.com
Max Stewart wrote:
> A web page with Fireworks 8 Javascript (not CSS) pop-up
menus imported into
> Dreamweaver 8 works fine on its own. However, if I
include the page in a
> frameset, the menus <i>appear</i> to work OK
(e.g. everything pops up and down
> when expected, all the rollover transitions appear
flawless, and the pop-ups
> are well clear of the frame boundary), but when a popped
up menu item is
> selected, <i>nothing happens</i> - the
top-level menu items are the only ones
> which still navigate to their links.
>
> (I normally avoid using framesets, but the frameset in
this instance has a
> useful applications function and I would be loth to
remove it)
>

Similar Messages

Pop-Up Menus and active content errors - Help!

I'm attempting to add pop-up menus to my navigation bar, to
make my site more user-friendly, but to no avail:
I've tried designing pop-up menus in Fireworks, then
importing the html code in, but that gives me errors when I try to
insert the bar. Then, I tried putting my menus in different layers,
with a "show layer" behavior on the button, and a "hide layer"
behavior attached to the roll-off of the layer, but my version of
Dreamweaver won't attach a behavior to a layer.
Then, I noticed the tech-note on this site for the fix to use
pop-ups in a template, so I added pop-up menus directly to my
navigational buttons using the wizard. So here's where my problem
comes in. . .
When I preview my page, it throws up an active content error,
but will still run. I uploaded it to my remote server, but when I
went to the url, no action takes place when I put my cursor over
it. Anybody have any ideas on how to create a pop-up menu that
won't throw up an active content error? I've seen them on plenty of
websites before, but can't figure how to do them.
Any light you could shed would be greatly appreciated!

> I'm attempting to add pop-up menus to my navigation bar,
to make my site
> more
> user-friendly, but to no avail:
Sometimes, they make your site less user-friendly. So be
careful.
The DW/FW pop-up menus are usually something that should be
avoided. They
are very poorly thought out and implemented, and will likely
cause you
continuing problems. It's foolish to devote the time to them
that could be
more effectively be placed elsewhere, especially since there
are better
options that work right out of the box, so to speak. Please
check the free
and commercial options here -
http://www.projectseven.com/.
> Any light you could shed would be greatly appreciated!
Don't use DW/FW pop-up menus.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Ally86" <[email protected]> wrote in
message
news:[email protected]...
> I'm attempting to add pop-up menus to my navigation bar,
to make my site
> more
> user-friendly, but to no avail:
>
> I've tried designing pop-up menus in Fireworks, then
importing the html
> code
> in, but that gives me errors when I try to insert the
bar. Then, I tried
> putting my menus in different layers, with a "show
layer" behavior on the
> button, and a "hide layer" behavior attached to the
roll-off of the layer,
> but
> my version of Dreamweaver won't attach a behavior to a
layer.
>
> Then, I noticed the tech-note on this site for the fix
to use pop-ups in a
> template, so I added pop-up menus directly to my
navigational buttons
> using the
> wizard. So here's where my problem comes in. . .
>
> When I preview my page, it throws up an active content
error, but will
> still
> run. I uploaded it to my remote server, but when I went
to the url, no
> action
> takes place when I put my cursor over it. Anybody have
any ideas on how
> to
> create a pop-up menu that won't throw up an active
content error? I've
> seen
> them on plenty of websites before, but can't figure how
to do them.
>
> Any light you could shed would be greatly appreciated!
>

Pop-up menus and Flash image

My development page has two things on it that are conflicting
with one another. I have a flash movie, and a pop-up menu. I would
like the menu to pop over top of the flash object, but quickly
learned that certain objects naturally float up to the top -
Thread
- But, the fix on this thread won't work for what I'm trying to do.
Is there any other way to get my menu pop over the movie? I
noticed the adobe main page has its menus overtop the flash movie,
so it must be possible, somehow. . . right?
Here's my
Test Page if it
helps to see what's going on. The pop-up in question is located at
"What We Do" -> "Programs"

The key is a special Flash parameter called WMODE, short for
Window Mode.
You'll need to add this parameter to your movie, set to
transparent. The
fastest way in Dreamweaver is to select your Flash movie and,
from the
Property inspector choose Parameters. In the dialog box that
opens, add
wmode in the Parameter column and transparent under Value.
That should do
the trick!
Best - Joe
"Ally86" <[email protected]> wrote in
message
news:e3t0nt$qf0$[email protected]..
> My development page has two things on it that are
conflicting with one
> another.
> I have a flash movie, and a pop-up menu. I would like
the menu to pop
> over
> top of the flash object, but quickly learned that
certain objects
> naturally
> float up to the top
> -
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=189&threadid
> =1092628&highlight_key=y&keyword1=behind - But,
the fix on this thread
> won't
> work for what I'm trying to do.
>
> Is there any other way to get my menu pop over the
movie? I noticed the
> adobe
> main page has its menus overtop the flash movie, so it
must be possible,
> somehow. . . right?
>
> Here's my
http://www.waystationinc.org/test.htm
if it helps to see what's
> going on. The pop-up in question is located at "What We
Do" ->
> "Programs"
>

Pop-Up Menus and Calculations

Hi all,
In my budget spreadsheet I am designing, I want to be able to denote the type of food each line item is in my "food" category. For example, I want to use a pop-up menu to indicate that the McDonald's I spent $5.66 on two days ago is a "Fast Food" type. After that, I want another cell to automatically detect that I selected that line item as a "Fast Food" type and then add whatever I spent in that line ($5.66) to any other line items that I designated as "Fast Food" types. Likewise, I want another cell to represent the total sum's of all my "Restaurant" and "Grocery" type food line items as well.
Thoughts on how to do this?
Thanks,
Ryan

Hi Ryan,
I would suggest a separate table for your summary statistics. In the second table, use the SUMIF function to add up all the expenses in specified categories.
For example let's say your expense log is in a table called "Expenses", your expense type is in column B, and your amount spent per transaction is in column C. The formula in your summary table for adding up all your "Fast Food" expenses in your Expenses table would be: =SUMIF(Expenses :: B, “Fast Food”, Expenses :: C). It makes no difference whether your expense type is from a pop-up menu or typed in directly.
Use the Numbers 08 Help function for assistance with the SUMIF function.
Jerry

Working with pop up menus in Dreamweaver CS4

this is my first time working with pop up menus in CS4 (have built many in previous versions), Adobe says you cannot create the pop up menus due to the new Spry feature - but that you can alter existing menus using the Behaviours panel
I have just launched a new website using pop up menus - and there is a glitch when viewing the rollover/pop up menus: I see a question mark to the left of each image in the menu (the images themselves are working beautifully), does anyone know why?
view the website here:
http://www.kiwihouse.org.nz
I want to keep the pop up menu so am looking for a solution to eliminate the floating question mark
does it have anything to do with the multiple javascripts on each page?.. I have one for the menus, and one for the multiple fadeshow
any advice or suggestions would be greatly appreciated
dQ

Not sure if this is the problem, don't have time to go through all your code - but putting the page through the validator bought up a lot of errors...
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.kiwihouse.org.nz%2F
Look at the 3rd error message - it's to do with the way the script link has been written.
Lots of other errors that need fixing as well.
On another note, these pop up menus are not the best way to create menus these days, that's why the pop up menu feature was removed from the latest DW version.
Articles that may be of interest:
http://www.losingfight.com/blog/2006/08/11/the-sordid-tale-of-mm_menufw_menujs/
http://apptools.com/rants/jsmenu.php
http://apptools.com/rants/menus.php

Strange problem with Dreamweaver Pop-Up menus

Hello:
I have encountered a very strange problem with DreamWeaver
pop-up menus, and I was wondering if I could get some help from
this forum, as I can't seem to find an answer anywhere else.
The problem involves use of DreamWeaver's pop-up menu
behavior — all works as expected, and my local preview of the
Web page/site works fine, but when I upload the site to a server, I
see extra question mark and "box" characters added to my drop-down
menus. This problem is inconsistent between browsers: Sometimes I
see it only on IE, sometimes I also see it on Firefox.
For example, check out the following URLs:
http://libertycreativesolutions.net/clients/cci/
... this implementation of drop-down menus ("Services"
button, etc.) displays an extra "box" character for each of the
drop-down menu items, but this only occurs in IE -- Firefox is
fine.
http://libertycreativesolutions.net/clients/microtek/HTML/MicroTek_home.html
... this implementation of drop-down menus shows an extra
question mark above the triggering link onMouseOver for Firefox,
and in IE, it shows this "box" character for both the triggering
buttons and for each menu item.
For both of these sites, the pop-up menus work without a
problem *when I'm looking at a local version on my workstation*.
What in the Wide Wide World of Sports is going on here????
Any help for this problem is appreciated.
Note that I stripped out the JavaScript code for menu
information from the <head></head> area of each of
these pages and placed it in a linked JavaScript document.
HELP!

First, you need to read this, written by the person who
adapted that menu
code for Macromedia -
http://www.losingfight.com/blog/2006/08/11/the-sordid-tale-of-mm_menufw_menujs/
Then you need to know that there are MUCH better ways to do
such things -
Check the uberlink and MacFly tutorials at PVII -
http://www.projectseven.com/
and the Navbar tutorial/articles at Thierry's place
http://tjkdesign.com/articles/dropdown/
Or this one (more recent article):
http://tjkdesign.com/articles/Pure_CSS_Dropdown_Menus.asp
Or to get it done fast, go here -
http://www.projectseven.com/tutorials/navigation/auto_hide/index.htm
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Pomond69" <[email protected]> wrote in
message
news:[email protected]...
> Hello:
> I have encountered a very strange problem with
DreamWeaver pop-up menus,
> and I
> was wondering if I could get some help from this forum,
as I can't seem
> to
> find an answer anywhere else.
>
> The problem involves use of DreamWeaver's pop-up menu
behavior ? all works
> as
> expected, and my local preview of the Web page/site
works fine, but when I
> upload the site to a server, I see extra question mark
and "box"
> characters
> added to my drop-down menus. This problem is
inconsistent between
> browsers:
> Sometimes I see it only on IE, sometimes I also see it
on Firefox.
>
> For example, check out the following URLs:
>
>
http://libertycreativesolutions.net/clients/cci/
> ... this implementation of drop-down menus ("Services"
button, etc.)
> displays
> an extra "box" character for each of the drop-down menu
items, but this
> only
> occurs in IE -- Firefox is fine.
>
>
http://libertycreativesolutions.net/clients/microtek/HTML/MicroTek_home.html
> ... this implementation of drop-down menus shows an
extra question mark
> above
> the triggering link onMouseOver for Firefox, and in IE,
it shows this
> "box"
> character for both the triggering buttons and for each
menu item.
>
> For both of these sites, the pop-up menus work without a
problem *when I'm
> looking at a local version on my workstation*.
>
> What in the Wide Wide World of Sports is going on
here???? Any help for
> this
> problem is appreciated.
>
> Note that I stripped out the JavaScript code for menu
information from the
> <head></head> area of each of these pages
and placed it in a linked
> JavaScript
> document.
>
> HELP!
>

Pop up menu and specific result in another cell

I have a cell with a pop up menu that displays the numbers 0-50 (in increments of 10 (0,10,20,30,40,50). I need another cell to display a specifice value once the pop up cell is chosen. How do i do this?

HI flacko,
Your best choice here is probably a lookup table containing the possible values of the popup in column A, and the desired result value in column B.
Here's an example.
I've added a "Choose" item to the pop-up menus ( "--" ) and made that the default value. The VLOOKUP function is included as the do-if-false part of an IF statement that keeps its cell 'blank' if a choice hasn't yet been made.
Main::B2: =IF(A="--","",VLOOKUP(A,Lookup :: $A:$B,2,FALSE))
The fourth argument of VLOOKUP ( FALSE ) makes VLOOKUP require an exact match, and isn't really necessary here, as every possible search value is included in column A of the Lookup table.
Regards,
Barry

How can I turn off hot link pop up menus in Safari, and anywhere else they appear? OS 10.7.4 thanks!!

How can I turn off hot link pop up menus in Safari, and anywhere else they appear? OS 10.7.4 thanks!!

Thanks, that's a great soluion for something else. but it doesn't solve this. these look like system pop up windows, and seem to arise spontaneously .. .. .. not always when hovering over a link. first thing I did when i fired up the this new computer's safari was turned off pop up windows.

Suddenly, pop-up menus began appearing when I press the cursor on the track-pad, which prevents me from opening a program or a file. I've had to wait and hope that a hand icon would appear when I track over the program or file. Is it a preference fix?

Suddenly, pop-up menus appear when I move my cursor over a file or a program to open it. Is there a preference setting that will fix this?

What do the menus say. Do they show system functions? Are they advertising. Do they happen with every program?
The preference to check is Universal Accesss:
See if any main options are turn on. The Keyboard tab is selected in the screen shot, Also select the Mouse & Trackpad tab and see if anything has been activated.
If that doesn't show the issue, I'm guessing your CONTROL key is stuck down.

Problems Creating a Blu-ray Disc with a Main (Static) Menu and Pop-up Menus

I'm having problems creating a simple Blu-ray disc containing a Main Menu (Static Menu with a graphic for my background) and a single Pop-up menu assigned to all of my timelines. I wouldn't think this would be so hard to create but every attempt I've made ends up with the navigation getting all messed up to the point that my Playstation 3 doesn't even recognize that the disc as being Blu-rey disc.
I want a simply static Main menu containing a "Play all" Button, and a button for each additional timelines. Im also using the override commands on my buttons so if someone just chooses to see one specific clip from the main menu, they will be taken back to the main Menu after their selected clip plays. But then I also want a Pop-up menu assigned to the timelines so the viewer can switch to a different clip (timeline) without having to go back to the Main (static) menu.
My Blu-ray Disc runs just fine if I only use a static menu in a project, or if I only use a single Pop-up menu assigned to each timeline, but not both a Static Main menu, and pop-up menus. I'm using CS4
Thanks.

it's just copying files to it, not video. If you put a blank blu-ray disk in the drive, it may show up in the finder. A program like Toast can burn a blu-ray.
http://www.roxio.com/enu/products/toast/titanium/overview.html

Trackpad and pop-up menus

I'm new to MacBook Pro but not to Mac - have had one since the old 512.
anyway, the trackpad which I loved for the first few days over the mouse is now driving me crazy and I couldnt find answers anywhere. First problem I get this pop-up menus all over the place - the ones that may say back, hyperlink. Second problem the lag for scrolling and I have it set most sensitive and fast. Sometimes the cursor just sits there. I vary the pressure of my fingers and sometimes that works.
I've just had this MBP a little over a week but the trackpad is problematic. Can anyone solve this problem? If so, thank you thank you.
sandy the foodie

I called Apple twice before finally realizing it was mostly technique on my part. The tech did walk me through the resets and that seemed to help, but in the end it was mostly me.
First let me say that I love trackpads; I even had one on my old PC instead of a mouse. So I was sure it was the MBP. Well, I started paying attention and suddenly it hit me - the MBP trackpad is HUGE! It must be twice the size the one on my work HP. But my natural tendency on the MBP was to keep my finger centered in the MBP trackpad just like I do on the HP. And that made it much more likely that another finger would inadvertently touch the trackpad. But why? Unlike the HP, the MBP doesn't have areas reserved for special functions like scrolling. So it doesn't matter where you drag your fingers, and the 2-finger scrolling is flat brilliant. By working my fingers closer to the right edge (right-handed) it's pretty much eliminated the random false inputs from my other fingers.

Problems with blu-ray pop-up menus

I made the mistake of tacking this question/problem onto another similar post, so here it is again for some:
I got this error message near the end of the disc build:
Blu-ray Error: "fatal error". Code: "6", Note: "Graphics buffer underflows. - Failed to multiplex with maximum IG PTS: 54900000 (in 90kHz).
The blu-ray project I am working on is an 87 min live concert with about 8 other much shorter timelines. The main menu has 6 buttons with a motion background. There are few submenus as well, but the problem came when I started making pop-up menus for the various timelines.
This is the first project where I really had to explore the possibliltes and limitations of Encore's pop-up menus. I burned a test disc with just a basic pop-up menu to see how the menu's opacity would look over the final video. All the video assets were set to to transcode "Automatically". All audio assets are blu-ray compliant Surround ac3's or 16-bit stereo WAV's so could be left as "Don't Transcode". This disc burned perfectly.
I then went through the pretty involved process of making a final version of the main pop-up menus. The main concert's pop-up menu has 5 pages (including page 0). There are specific pop-up menus for other timelines, but those have no more than 2 pages. None of the menus have more than 10 buttons.
I tried to burn the disc, and it came back with the error above. After reading some other posts, I thought it was worth a try to delete the AuthorScriptHDMVSessions folder before starting a new burn since it was already filled with files from my test burn. That didn't help.
Any insight or recommendations would be greatly appreciated.
Thanks.

After countless tests and research, I finally have a successfully burned blu-ray with WORKING multi-page pop-up menus (that I am happy with). Thank you to all the people who gave theoretical guidance and suggestions in emails and other posts. There has been no shortage of oddities and obstacles to overcome when just trying to make a simple blu-ray. Unfortunately, I did not have the time to accurately pinpoint what was causing the original error message. The project just needed to get done.
The main pop-up menu has 4 pages, with 13 buttons on each page. Only about 5 - 9 of the "buttons" on each page are actual buttons that link anywhere. The other buttons on each page only serve as the remaining pieces of the menu's background and cannot be accessed on the final disc. Totally ridiculous way to make the backgrounds for pop-up menus, but it works.
Some of the other things I learned regarding pop-up menus + Encore misc:
1. If at all possible, totally create a menu .psd BEFORE bringing it into an Encore project. Make the button order in the .psd what you want it to end up being in the end (bottom layer is button 1). If you start editing and saving order after it has been brought in, Encore will almost always revert it back to some strange (possibly original) button order. You will spend all your time re-routing button navigation and changing their numbers, only to find out later that Encore has changed it all back without notice.
2. As many people state, it is best to have Encore do as little thinking as possible. All of my button groups originally had Text Layers within them with some fx applied. I merged each text layer down into that button's background layer to essentially rasterize the text with the fx applied. Each (+) button group therefore only had a higlight layer and a background layer. After doing this for all the buttons, the .psd file size was greatly reduced. Naturally I saved a copy before going through the merging process in case I ever had to go back and edit the text.
3. Originally the background for the pop-up menus were made from a rectangle cut-out of the background of the main menu. This was the width of the frame and around 1/5 of the height. I had changed the opacity to around 60%, and cut up the pieces to go with their respective buttons. For the final disc, I just made a shape with the Rounded Rectangle Tool, and filled it with a solid colour. It is probably only about half the size of the original pop-up menu's background. I changed its opacity as well, but then merged it with a blank layer so Encore didn't have to think about the opacity setting.
4. I encoded all the video elements BEFORE they were brought into the project. There are some issues with the way the file sizes are interpretted by Encore, but I won't trust it to encode anything again.
5. For some reason Encore wants to transcode 16-bit, 48.0 kHz .aiff files when making a blu-ray, but 16-bit, 48.0 kHz .wav files do NOT need trancoding (for both dvds and blu-rays).

How to change the presets in pop-up menus (CS6 or CR 7, example Photo Filter) with arrow keys?

How to change the presets in pop-up menus (CS6 or CR 7, example Photo Filter) with arrow keys an see at the same time the changes on the photo?
It worked under Windows, now I use OS 10.8 and have to apply a preset with a click or Return button but after that the pop-up menu close so I have to open it once again to change a preset. Please help. Thank you!

The filter panel is a shortcut for the content panel and it only effects the content of that window. So if you have a folder it will only see this as a folder and not with its content. (a Stack behaves about the same, being different in only counting the first file in the filter panel criteria but not what is in the stack itself)
You have a view work arounds, first is use menu view / show items from subfolders (this can take some time especially if you have not used caching before on this content) and this builds visible thumbs for all content and that can be used for filtering.
Or use the find command (Edit / find) and inhere specify the source and fill in the criteria include subfolders and this will give you the correct result.
When you create a smart collection the find command also pops up given you the same opportunity to get the results in a collection, but since a collection is only a bunch of aliases referring to the originals you might be a bit careful with editing and deleting.

How do I have Blu-Ray pop up menus linked together if I'm using multiple timelines?

I have a 6 timeline project that I put in pop up menus for. Each timeline asks for it's own pop up menu to use. The pop up menus seemed to need to be created with the multiple chapter option to work for me, I couldn't create stand alones and link them together because the timeline asks for ONE pop up menu associated with it. I then created 6 separate pop up menus (each one ended up with about 3 pages) one for each timeline. I tried to link POP UP MENU1 to POP UP MENU2 with a NEXT button at the end of the last page of POP UP MENU1. When I drag the whip to link it to the proper pop up menu when I actually look at the button the link is the current pop up menu not the one I want it linked to, so I am unable to do this. The pop up menus function properly on my Blu-Ray player- If I am viewing material from timeline 1, I can pull up POP UP MENU1 and arrow back and forth to the three pages on this, POP UP MENU2 functions the same way for timeline 2. etc.
Project Settings:
Blue Ray
720 X 480
EncoreCS5
Quad 4
2.4 GHZ speed
150 GB free space on drive
NVIDIA GEFORCE 8500 card
6 GB Ram

First of all, the pop up menus can not be linked to each other.
If you want, you can have more pages on a single pop up menu and link all your timelines or chapters to the buttons of the pages and then link that pop up menu with more number of pages to all of the timelines. In this way, you can have the option to navigate to any chapter of any timeline while any timeline is playling.
Thanks,
Ramesh.

How to edit DW 8 pop-up menus in DW CS5?

Hello,
Yes, I understand about Spry menu bar in CS5 and will use it in the future for creating new pop-up menus.
However, I have already created many pop-up menus using DW 8 for multiple web sites and standalone web pages - about 100 web pages total - for my employer.
Is it possible to edit these DW 8 pop-up menus from within DW CS5?
I did try the only instructions I found, which I thought were to choose ~ Deprecated from the Behaviors menu, and then choose the Pop-up menu. However, even when I have open a web page in CS5 containing an existing pop-up menu I created in DW 8, I do not see anything about Deprecated on the Behaviors menu.
I tried positioning my cursor on the URL and then also on a graphic item associated with the pop-up menu behavior I applied in DW 8 - still did not see "Deprecated" in the Behaviors menu or how to select it. (Please note that my pop-up menus do not involve Fireworks MX in any way; they were created directly in DW 8 by applying the pop-up menu JavaScript behavior.)
What am I missing? How do I select "Deprecated" in the Behaviors menu?
Is there some other way - or any way at all - I can edit my pop-up menus previously created in 100+ web pages ? I really do not have time to re-do all of these web pages using Spry.
Please advise. Thanks!

Hello, Thanks for the response. All of my web sites and standalone web pages are internal, behind the corporate firewall so I cannot provide you with links.
Recap: The pop-up menus I created in DW 8 work beautifully, seamlessly and were very easy to maintain in the earlier version of Dreamweaver. I have been using DW pop-up menus since 2004.
Goal: To update and edit these pop-up menus created in DW 8 - in DW CS5. Why? Because we have multiple websites and standalone web pages, 100+ web pages total, some with multiple pop-up menus on each page and it is not possible due to time limitations to re-code and re-develop all of these existing pages using the new Spry menu. We will use the Spry menu when we create new menus for new web pages in the future.
I have previously read here: http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WSc78c5058ca073340dcda9110b1f693f21-7ae 9a.html that you choose ~ Deprecate from the Behaviors menu to update existing DW 8 pop-up menus in DW CS 5, but I do not have this option available to me - I do not see a "Deprecate" selection available when I select an existing DW 8 pop-up menu to edit in CS5. Perhaps I am doing something wrong? When I place my cursor on the pop-up menu items, and go to the Behaviors panel, I do not have a Deprecate option, and the pop-up menu actions are not available to select.
I am concerned that the only way it appears that I can edit the pop-up menus is to edit the HTML which is possible but messy, and defeats the reason for having DW in the first place. Otherwise, I guess we go back to using DW8 and don't use DW CS5 at all for our existing web pages. If that happens, management will certainly question "why did we pay $400 for a commercial license for a software product which does not allow us to edit our existing web pages?".
Here are two coding samples from my web pages with the links changed so that confidential information is non-identifiable:
Example 1
1. Link coding associated with the pop-up menu behavior (identifiable link information changed for this example):
<a href="examples1/index.html" name="link1" id="site-home" style="text-decoration:none" onmouseover="MM_showMenu(window.mm_menu_0112173011_0,152,-1,null,'link1')" onmouseout="MM_startTimeout();">Example link 1<img src="images/triangle-sm.gif" alt="pointer" width="5" height="6" style="margin-left:6px"/></a>
2. Associated coding in the <head> tag for this particular example:
<script language="JavaScript" type="text/javascript">

</script>
<script language="JavaScript" src="mm_menu.js" type="text/javascript"></script>
3. Of course, we load the menus in the first line after the open <body> tag:
<script language="JavaScript1.2">mmLoadMenus();</script>
The "mm_menu.js" file itself is located in the self-same directory/folder as the web page, so it loads properly and the pop-up menus function as expected.
Example 2
1. Link coding associated with the pop-up menu behavior (identifiable link information changed for this example):
<a href="javascript:void(0)" name="link5" id="link1" onclick="MM_showMenu(window.mm_menu_0203084229_0,-115,-40,null,'link5')" onmouseout="MM_startTimeout();">Reports</a>
2. Associated coding in the <head> tag for this particular example:
<script language="JavaScript" type="text/javaScript">

</script>
<script language="JavaScript" src="mm_menu.js"></script>
3. Of course, we load the menus in the first line after the open <body> tag:
<script language="JavaScript1.2">mmLoadMenus();</script>
The "mm_menu.js" file itself is located in the self-same directory/folder as the web page, so it loads properly and the pop-up menus function as expected.
-------End Code and examples-------
Please advise. Thanks.

Pop-up menus and frames

Similar Messages

Maybe you are looking for