Pop up message: Norton Confidential cannot protect you while you use this version of Firefox(18.0 current). Phishing Protection requires Firefox 1.5 or later(?

I am currently using Firefox version 18.0 yet when I open Firefox, I always get this pop up message:
“This version of Firefox is not supported by Norton Confidential. You will not be protected while browsing the Web.
Norton Confidential cannot protect you while you use this version of Firefox. Phishing Protection requires Firefox 1.5 or later.”
Do you know what is causing this? This started when I updated to Firefox 16.0.2. Am I at risk?

You may find information on Norton's own forums about this.
I am not sure that any protection against phishing provided by Norton is going to be better than the protection that Firefox offers by default.
* see http://www.mozilla.org/en-US/firefox/phishing-protection/
I can not recommend that you downgrade to an earlier unsupported and insecure version of Firefox,because that WILL increase the security risks.
* [[Install an older version of Firefox |do not]] Install an older version of Firefox

Similar Messages

  • I have updated to OS X 10.9 and now can't open Aperture, message reads You can't use this version of the application "Aperture" with this version of OS X. You have "Aperture" 3.2.3... all i need to know is how to get Aperture to work again..help !

    I have just updated to OS X 10.9 and now find that I can't open Aperture to access photos etc, message reads : You can't use this version of the application "Aperture" with this version of OS X. You have "Aperture" 3.2.3... whichj is not a lot of help, i have limited technical ability and all i need to know is how to get Aperture to work again...help !

    Software Update?

  • I have just bought a 2011 iMac (2.5 ghz, 4gb) and logic express 9, and when i installed logic and tried to run it i had a message saying 'you can't use this version of the application logic express with this version of Mac OS X. How do i sort this out!?

    I have just bought a 2011 iMac (2.5 ghz, 4gb) and logic express 9, and when i installed logic and tried to run it i had a message saying 'you can't use this version of the application logic express with this version of Mac OS X. How do i sort this out!? It is very frustrating as the main reason i have bought  a mac is to use logic! Any help would be great as i am a complete novice when it comes to Macs!

    You're probably on OS X Lion?
    I had the same problem as you. I used Software Update to update Logic Express to the latest version, and then it ran without any problems.

  • Got message... you can't use this version of the application mail with this version of Max OS X, after i upgraded operating system to MAC OSA X Snow leopard.  How do I get my Mail?

    Hi ...just upgraded my Macbook pro to Mac OSX snow leopard and when I tried to look at my mail, I got this message "You can't use this version of the application mail with this version of MAC OS X".  What do I do now to look at my mail and receive new mail?

    After updating make sure you repair permissions and restart your computer.

  • Logic Pro 9 (9.0.0).   Message You can't use this version of the application Logic Pro 9 with this version of Mac OS X You have Logic Pro 9 9.0.0.   I have been told that I can use the Logic Pro 9.1.4 Update (.dmg) which you can download from Apple Logic

    Since upgrading to lion, I can't use Logic pro, hope someone can help.  thank you
    Logic Pro 9 (9.0.0).
    Message
    You can't use this version of the application Logic Pro 9 with this version of Mac OS X
    You have Logic Pro 9 9.0.0.
    I have been told that I can use the Logic Pro 9.1.8 Update (.dmg) which you can download from Apple Logic Support, although when I try to upgrade my I get this message:
    An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.

    Since upgrading to lion, I can't use Logic pro, hope someone can help.  thank you
    Logic Pro 9 (9.0.0).
    Message
    You can't use this version of the application Logic Pro 9 with this version of Mac OS X
    You have Logic Pro 9 9.0.0.
    I have been told that I can use the Logic Pro 9.1.8 Update (.dmg) which you can download from Apple Logic Support, although when I try to upgrade my I get this message:
    An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.

  • Unable to open mail, address book etc due to this message:  You can't use this version of the application Address Book with this version of Mac OS X. HELP!

    I am transferring my mother's address book and mail etc to my computer from an external hard drive enclosure and am not able to open it due to this message:  You can't use this version of the application Address Book with this version of Mac OS X. HELP!  Is there a way to open her older applications and get the info out?

    her email is in user>Library>Mail folder. Hopefully you've created another user on your Mac for your mother so she would have her own user Library.

  • Hi Ive downloaded the free trial version of Fcpro x and its not working, an error message comes up saying: You can't use this version of the application ''final cut pro trial'' with this version of OS X You have OS X 10.8.5. it requires 10.9 or later,Help

    Hi friends.
    Ive downloaded the free trial version of Final cut pro x and its not working, an error message comes up saying: You can't use this version of the application ''final cut pro trial'' with this version of OS X You have OS X 10.8.5. it requires 10.9 or later, please can anyone Help.

    Just download Mavericks (10.9) its free and installed it (Mac App Store)

  • Suddenly "You can't use this version..."!

    After using my current version of Keynote until just yesterday without any problems, I suddenly now get a message "You can't use this version of the application Keynote with this version of Mac OSX. You have Keynote 1.1.1."  I haven't updated my system or anything... has anyone else had this suddenly pop up?  (I have been using OS 10.7.2 for quite a while now.)  There's a gray circle with a slash inside it on the app icon.

    Stupid me-- Problem solved! I had several versions of Keynote on my Mac and somehow I was trying to open a previous version.

  • I just ran the updates for my MacBook Pro and now my iphoto will not open.  It says "You can't use this version of the application "iphoto" with this version of os x.  You have "iphoto 9.2.3

    I just ran my updates for my MacBook Pro and now my iphoto won't open. I get a pop up that say's You can't use this version of the applicaton IPhoto with this version of os x.  You have iphoto 9.2.3.

    This screenshot shows which previous versions of iPhoto are compatible with Mavericks.  It also indicates which versions qualify for a free upgrade to iPhoto 9.5.1 and which require a purchase:
    Note 1:  every day more users are reporting problems with iPhoto 8.1.2 so I've included it in the non compatible category.
    Note 2:  If your previous version of iPhoto was iPhoto 7 (08) or earlier you'll need to download and run the iPhoto Library Upgrader 1.1 application on the library before opening it with iPhoto 9.5.1.
    OT

  • You can't use this version of the application Mail with this version of Mac

    I just installed 10.6 and all seemed well until I tried to load Mail. I got this response
    "You can't use this version of the application Mail with this version of Mac You have Mail 3.5".
    I successfully reinstalled 10.6 and I also reloaded the apps that were contained in another folder on the CD. I get the same message every time I try to load the Mail program. I deleted the "mail plist" file and that did not work. So I recovered my old one from Time Machine. Still dead!
    My poor wife is so frustrated that she is now using my machine!!! HELP PLEASE!

    I successfully reinstalled 10.6 and I also reloaded the apps that were contained in another folder on the CD.
    Why would you "reload" any apps? They should have been installed when you installed 10.6. Where exactly did you reload them from?
    So I recovered my old one from Time Machine.
    ...which undoubtedly still contained the old copy of Mail from your last Leopard backup, and not the current version of Mail that should have been installed with 10.6.
    What you need to do is reinstall the appropriate version of Mail from your Snow Leopard install disk. You can install one specific program from the install disk using [Pacifist|http://www.charlessoft.com> - though, check carefully to make sure it's been cleared for use with the Snow Leopard install disk!
    Whether that will fix your problem or not, I don't know, as I don't know what exactly you've done. It sounds like you've done a lot of things you should not have done, mixing components of your older system into your newer system. It is entirely possible you will need to reinstall the entire system.

  • When I try to open iPhoto (9.2.1) it says 'You can't use this version of the application iPhoto with this version of OS X.  All my photos are on there.  Please help.  Thank you

    When I try to open iPhoto (9.2.1) it says 'You can't use this version of the application iPhoto with this version of OS X.  All my photos are on there.  Please help.  Thank you.

    Did you upgrade to a new MacOS X version? Then you need to update iPhoto as well.
    Only iPhoto 9.6 is compatible with MacOS X 10.10 Yosemite.  Update from the Mac App Store.
    Backup your iPhoto library, if you do not have a current backup.
    Launch the App Store, click the "Store" menu, and sign in with your current AppleID.
    Check the "Updates" tab of the App Store for an iPhoto update and run the update.
    When you laugh iPhoto after the update, it will warn you, that the library needs upgrading, That may take a while.
    Just in case that you see a warning, that the update is not possible because of an error message: "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."
    Uninstall iPhoto by deleting it from the Applications folder, but do not empty the Trash, so you can put iPhoto back, if need be.
    Launch the App Store, click the "Store" menu, and sign in with your current AppleID.
    Open the main page "Featured" of the App Store and search for iPhoto.
    If iPhoto is listed as "Free", click the "Free" button to buy it with your current AppleID.
    If it is not showing as free, there is no help but contacting the App Store Support to sort out the AppleID. Use this link: http://www.apple.com/support/mac/app-store/contact/

  • You can't use this version of mail

    Last night I updated my system software to OS X 10.7.5 from 10.7.4 and all the other programs in Software Update, including Java.
    For some reason I have 2 versions of Mail on the computer, 5.3 and 5.2 due to a faulty backup in the past 
    Now I can't open the version of Mail which was working yesterday instead getting this message
    You can't use this version of mail
    You tried to open Mail version 5.2 (1278/1283)
    How can I resolve this?

    OK that worked.
    I now have 5.3 open but there is no main window and some of the functions aren't working.
    When I looked in Preferences>Accounts there is just a blank window.
    If I open a new message there is nothing in the sender drop down box and no signature.
    Looks like I've lost my connection with my account.
    I can still get the messages in Safari.
    So getting closer, how do I reconnect with my Mail Account.

  • You can't use this version of application "After Effects"

    I have the Adobe CS6 installed on my computer and they all worked fine with Snow leopard, but the moment I got Yosemite and tried to open After Effects I get this message:
    "You can’t use this version of the application “Adobe After Effects CS6” with this version of OS X.
    You have “Adobe After Effects CS6” 11.0."
    Every other program I tried on Adobe CS6 works fine but After Effects will not open. I tried to uninstall and reinstall it but I get the same message.
    After Effects is my second most used program on the Creative Suite, how do I fix it?

    Hi Lowenfas, did u fixed ur Ae issue?
    I was having same problem and fixed it with new Br CC.
    Let me know.

  • You can't use this version of the application Logic Pro with this version of Mac OS X.

    You can't use this version of the application Logic Pro with this version of Mac OS X. why am i getting this message after upgrading to lion

    <Bump>
    See this thread.
    https://discussions.apple.com/message/15700842#15700842
    and this one.
    https://discussions.apple.com/message/15700505#15700505
    pancenter-

  • You can't use this version of Font Book with Snow Leopard!

    Hi,
    Since upgrading to Snow Leopard I get the following error message when attempting to open Font Book:
    "You can't use this version of the application Font Book with this version of Mac OS X. You have Font Book 2.1."
    Most solutions I've found via Google simply suggest reinstalling Snow Leopard. Does anyone know of a less drastic solution to this problem?
    Could I copy the correct version of Font Book (v2.2) the SL CD?
    Thanks,
    Mateus

    you should have fontbook 2.2 already if you installed SL. possibly you have an old leopard version of fontbook in a different location and that's what you are trying to run now. go to the main Applications folder at the top level of the hard drive and launch Font Book from there. does it run?

Maybe you are looking for

  • My itunes won't open... read?

    "Apple application support was not found. Apple application support is required to run itunes. Please uninstall itunes and reinstall again. Error 2. (windows error 2)" that error comes up everytime i try to open up itunes. I've un-installed itunes se

  • Automatic payments with no Business Area aggregation

    Hello, I am trying to run an automatic payment program for one vendor and the system splits the open items by Business area. But I donu2019t want that. I would like to aggregate line items in one, if my payment is just one. I've check my customizatio

  • GenIL Model Attribute Structure not getting updated with new fields added

    Hi All, I have modelled the service interface using GenIL Modelling in Duet Enterprise 1.0. Later, I added some fields to the read operation in the Enterprise Services Builder in the ESR system. But in the Read Operation mapper method "/IWFND/IF_SRD_

  • Financial Reporting Sorting with page dimensions

    I had a report that was sorting account by description, in ascending order. However, then I changed it and added the Entity Dimension into the Hierarchy and it removed the Sorting. I cant get it to sort again. Is this a function of FR that if there a

  • I need help with NumberFormat moneyFormat

    Hello again. I modified the code a little. What doesn't work now is formating the total of the shop with just two decimals. It doesn�t show the dollar sign and shows like 14 decimals to the right of the decimal point. I guess I should place NumberFor