Pop-up message 'PhotoshopElementsSyncAgent.exe- No Disk

Please help me stop this very annoying and extremely bothersome pop-up message that occurs EVERY 30 seconds, over the top of any work [You cannot minimize it nor click on your work to bring work page to the top. I work away a lot and upon turning my computer on and going into Elements 7 I was informed of the transition to Rebel. The opt out date had already gone by. Shortly after I kept getting this annoying warning box pop-up every 30 seconds even when Elements is not running! Inside the box the note says 'There is no disk in the drive. Please insert a disk into drive\Device\Harddisk2\DR2.'    [The other day was exactly same message except Harddisk4\DR4] It is bad enough if this was just with using Elements but it is constant making work impossible and extremely frustrating that Adobe Technicians cannot be reached to and told to refer to forums! When I contacted live help I was told it was beyond their scope!! Please can I have some help so that I may use my computer for work when I am home. I don't want Rebel, I don't want to sync my photos, I have my own storage. I would also like someone from Adobe to get in touch with me. Thanks   

Hello Steve
The simple and quick fix is right-clicking on that little Safe icon in the system tray (near the system clock) and choose Stop Backup/Synchronization. Do you see that icon?
Turn it on and off as needed. Did this work for you?
Scott

Similar Messages

  • Constant Pop-up Warning Message- PhotoshopElementsSyncAgent.exe-No Disk

    How can I stop this constant pop-up box from appearing on my computer screen every 30 seconds even when Elements is not running. Never had it before until I turned my computer on in May- I am wondering if something to do with the change over for back-up of photos and synchronization. Inside the box it says 'There is no disk in the drive. Please insert a disk into drive\Device\Harddisk4\DR4.'
    Please help me get my computer back to normal so I can actually do work on it!!   

    I have received, and I am sure it is about the migration to rebel. The  fact is they gave a very short opt out window and since I work away from home for several weeks at a time this has since been expired. I need to know how to opt out of this transition to Rebel.!

  • When save as TIFF is selected a pop up message appears saying that disk is full.  What does that me

    When selecting SAVE AS in Photoshop CS5, I received a message saying that the disk is full.  This is this first time I have seen this message from CS2 on.  I don't understand what disk is being mentioned here.  Of course I understand what disk full means, but I don't understand what disk is being discussed or refered to.  Can someone please enlighten me?

    It could be your OS disk, or the disk you're saving to.

  • I just reinstalled my PS7 onto a new computer, Vista, and now I keep getting an error message which says "photoshopelementssyncagent.exe-no disk.  I turned off Firewall, allowed Firewall to let in program and nothing works.  I can't even get into

    photoshop at all with this.  I am about ready to get rid of this stupid program!  Does anyone know how to fix this?  Does this not work with Vista?

    Attached is Dennis Linam’s Audition – “Log File” and “Log – Last File”
    Contact information Dennis [email protected]
    Previous contact information with your organization (DURIM):
    Dennis - i just finished my audition trial and bought the subscription the 2014 version.
    created by durin in Audition CS5.5, CS6 & CC - View the full discussion 
    DURIM - Okay.  I would expect the "Cache Warning" message because your default directories would not be the same as the ones in the settings file I generated.
    If you go back to the "7.0" directory and open the "Logs" folder, can you copy the "Audition Log.txt" file and send it as an attachment to [email protected]?  We'll take a look in that logfile and see if it gives us more information about why this is failing now.
    Also, do you have any other Adobe applications installed on this machine, such as Premiere Pro?  If so, do they launch as expected or fail as well?
    I do have the trial Pro version of Adobe reader, but I have not activated it, because I fear the same thing will happen did it. I cannot afford to activate the subscription for that product and take the chance of it not working either. I depend on those two programs religiously. Here is the files that you requested. I appreciate any help you can give me to get this audition program started
    Audition Log- file
    Ticks = 16       C:\Program Files (x86)\Common Files\Adobe\dynamiclink\7.0\dynamiclinkmanager.exe
    Sent from Windows Mail

  • Error message : hpqwutils.exe no disk device\harddisk1\dr1

    Hi,
    Have been getting this message repeatedly since shortly after starting to use my new HP g6 notebook.
    Comes up everytime I boot up, have to log back in after time out, and sometimes at launch of a program - drives me crazy!
    Does anyone know what this is or how to fix it?
    Would appreciate any help!
    Thanks  

    Hello!!
    I  had this issue since the moment I purchased my Pavilion g6 1281sl one and half year ago. I thought it was a broken sector on the hard thisk, corrupting a section of the Windows 7 Os. I passed the whole period testing the disk, reinstalling the Os, etc. finally, I think that the message has its origin because of my Usb Onda MC833UP internet Key! I'm sure at least 99,99%, since I now remember that I never managed to have a succesful full install of all the drivers for this Usb peripheral. One of them was unsuccesful. And only now I notice that this boring and worryng message appears to me only if I turn on and off my notebook with the Onda Usb key inserted!!! Never, never had issues if it is not inserted when turning the notebook on or off! Maybe the Onda software doesn't ( well, on their web page they say the key supports 32\64 bits Windows 7 machines...) support the 64 bits Os or machines... Or it's Windows 7 that doesn't supports the drivers. I am not a technician, so just you choose the option. But I bet it's nothing serious. Only, maybe a drive among the several installed can't be recognized and accessed because the uncorrect drivers installation and doesn't appear when you open the resources' window.
    Hope this could be useful for all the users, hoping that someone ( Microsoft? HP? Onda Communications?) would fix this problem soon...
    All the best and a Happy New Year from Italy!
    Francesco.

  • Error message acrodist.exe - No Disk

    I keep getting this message at various times and programs.  Repeatedly when I print to Adobe pdf in Illustrator.  I just have to cancel repeatedly to close the message.  I am still able to print to pdf.  Does any one have a suggestion?  The only changes in drives is for thumb drives for regular document files.

    Hello!!
    I  had this issue since the moment I purchased my Pavilion g6 1281sl one and half year ago. I thought it was a broken sector on the hard thisk, corrupting a section of the Windows 7 Os. I passed the whole period testing the disk, reinstalling the Os, etc. finally, I think that the message has its origin because of my Usb Onda MC833UP internet Key! I'm sure at least 99,99%, since I now remember that I never managed to have a succesful full install of all the drivers for this Usb peripheral. One of them was unsuccesful. And only now I notice that this boring and worryng message appears to me only if I turn on and off my notebook with the Onda Usb key inserted!!! Never, never had issues if it is not inserted when turning the notebook on or off! Maybe the Onda software doesn't ( well, on their web page they say the key supports 32\64 bits Windows 7 machines...) support the 64 bits Os or machines... Or it's Windows 7 that doesn't supports the drivers. I am not a technician, so just you choose the option. But I bet it's nothing serious. Only, maybe a drive among the several installed can't be recognized and accessed because the uncorrect drivers installation and doesn't appear when you open the resources' window.
    Hope this could be useful for all the users, hoping that someone ( Microsoft? HP? Onda Communications?) would fix this problem soon...
    All the best and a Happy New Year from Italy!
    Francesco.

  • I am not able to update iTunes keeps popping up message saying no free disk space I checked and there is enough to support the upgrade but I cant figure out why it wont let me. Help anyone!

    So heres the deal, I updated my iphone and in order to put any music on it or even ringtones I have to have the most updated version of iTunes, unfortunately my macbook wont allow the update, I do have a lot of pictures and song stored on here but I have no documents I have deleted everything the only thing left on here is what the macbook came with. I checked and it says that I have enough memory so is there another reason I cant update. When I try and check for the update option in iTunes it says its up to date but I have version 10 something so I know its old, I haven't been able to update anything on here. Do I have to take it to the store or is there something that I can fix on my own because my warranty is up and I have nothing but problems when I go into an actual apple store.

    If you want to try to clear even more disk space see https://discussions.apple.com/thread/5872318?tstart=0

  • How to stop receiving "AdobePremiereElements.exe - No Disk" error message at start-up

    I upgraded from Premiere Elements 9 to 13 at Adobe.  Install went without error, but each time I call up the program a window pops up entitled "AdobePremiereElements.exe - No Disk" with the following text within the window:  "There is no disk in the device. Please insert a disk into drive \Drive\Harddisk1\DR1."  I can eventually get this window to remove after repeated attempts, and the program seems to be running fine.  Would appreciate knowing how to stop such nonsense and remove the annoyance.  Thanks.

    jimp
    Thanks for the good news that the OldFilm.AEX file is gone and no more No Disc error message.
    To update 13 to 13.1, you need to use an opened project's Help Menu/Updates.
    Have you done that, and the message was that you were up to date already?
    To check what version you have
    Premiere Elements Editor. Help Menu/About Adobe Premiere Elements. The screen that then displays should show 13.1 if updated from 13 to 13.1.
    That Help Menu/Updates location should let you take are of the Elements Organizer updating from 13 to 13.1.
    Nonetheless, you can check on Elements Organizer Help Menu/Adobe Elements Organizer to assure that the screen that displays shows 13.1 instead of 13.
    Any questions, please let me know.
    Best wishes
    ATR

  • Illustrator.exe - No Disk Error

    Hello,
    I've been getting this error with a handful of documents that I migrated from an old computer.  When opening one of the offending files the following error pops up.
    Illustrator.exe - No Disk
    There is no disk in the drive. Please insert a disk into drive \Device\Harddisk9\DR9.
    [Cancel] [Try Again] [Continue]
    Clicking on any of the buttons results in the error popping up again.  After several clicks (10ish) the error will stop, until you click on the document, then the error will begin another cycle.
    The only thing that I can figure is that one of the referenced files in the document is not where it used to be and illustrator doesn't know what to do, or at least is not dealing with it very gracefully.
    Does anyone have experience with this or any ideas on how to resolve the issue?
    Thanks for your help,
    Paul

    I suppose the only way to fix this is to create a virtual drive/partition that has the correct mapping. You can do that on the command line using the subst command on Windows by simply assigning the drive letter to an existing directory. On a mac one would simply use aliases. If you wanted to go deeper, you'd have to read up un junctions on Win and symbolic links on Mac...
    Mylenium

  • I have downloaded Adobe Photoshop digitally but when i activated adobe I keep getting this error message Adobe Premiere Elements.exe - NO DISK. There is no disk in the drive. Please insert a disk into drive/device/harddisk/dr1

    I have downloaded Adobe Photoshop digitally but when I activated adobe I keep getting this error message Adobe Premiere.exe - NO DISK - There is no disk in the drive. Please insert a disk into drive/device/harddisk/DR1

    It sounds like you downloaded the wrong application, namely Adobe Premiere Elements.
    If you meant Adobe Photoshop Elements, you're in the wrong forum.  This is not the Elements forum.
    Here's the link to the forum you want:
    https://forums.adobe.com/community/photoshop_elements/content
    If you mean Photoshop proper, since you are posting in the Photoshop forum, give version details and your system specs.
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Premiere Elements 13  Adobe Premiere Elements.exe-no disk (window) There is no disk in drive.  Please insert a disk into drive\Device\Harddisk\DR3.

    I just updated to Photoshop & Premiere Elements 13, by downloading the 64-bit Windows version from the Adobe website.  Windows keeps popping-up (multiple times) "Adobe Premiere Elements.exe-no disk" window.  Circle X  - comment "There is no disk in drive.  Please insert a disk into drive\Device\Harddisk\DR3.  After 6 to 18 times (choses cancel, try again, continue).  The window finally goes away.  How do I get rid of this problem?  BTW, when installing from Version 11, I opted from the preferences from the 11 Version.

    One
    What motivated you to
    I chose Adobe Elements 11's preferences to be installed into the Adobe Premiere Elements 13 
    program.  It was an options , when setting up the Version 13 program.
    Was there something extraordinary about your Adobe Premiere Elements 11 preferences?
    It is interesting situation...maybe a coincidence, but 11 was typically hit with No Disc message, and
    most of the time the problem was related to SmartSound which was discontinued in versions 12 and 13.
    If no extraordinary reason for this preferences transfer which I have not run into...
    Assuming Windows 7, 8, o 8.1 64 bit
    Local Disc C
    Users
    Owner
    AppData
    Roaming
    Adobe
    Premiere Elements
    13.0
    and, in the 13.0 Folder is the Adobe Premiere Elements Prefs file that you delete to "flush" the preferences. If that does not
    work, then delete the whole 13.0 Folder in which the Adobe Premiere Elements Prefs file exists. Be sure to be working with
    Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete file cited.
    Have you installed Premiere Elements 13 to the default location on Local Disc C?
    Please review and consider.
    ATR

  • I need help. My ipad 2 was stuck in recovery mode. i tried to connect it to itunes and restore but after downloading the file and extracting the software there is a pop up message that says "the device is full" i dont know what to do. Its been 2 days now.

    I need help. My ipad 2 was stuck in recovery mode. i tried to connect it to itunes and restore but after downloading the file and extracting the software there is a pop up message that says "the device is full. Deleting files and emptying your recycle been will help you restore." how am i going to erase files if i can't open my ipad. i dont know what to do. Its been 2 days now. please help. thanks.

    yes i am sure. This are the exact words... "The iPad "iPad" could not be restored. The disk you are attempting to use is full. (Removing files and emptying the recycle bin will free up additional space". i tried some options, hard reset, redsnow, tinyumbrella but still it's stuck.

  • Itunes.exe-No Disk error messsage

    The following message shows up whenever I open itunes:
    "itunes.exe - No disk
    There is no disk in the drive. Please insert a disk into drive\Device\harddisk1\DR2"
    Can anyone tell me what this means, and more importantly how do I make it stop?
    As long as I click on the "continue" button anywhere from 3 to 16 times, itunes will eventually open. Surely, this is not normal and it has only just begun to happen (after almost 2 years of using itunes.
    Any assistance will be greatly appreciated.
    Thank you,
    Tom

    Hi I have the same problem I tried many times but nothing happen. Do you know wath do I have to do

  • I keep getting adobecollabsync.exe - No Disk error

    It pops up whenever I open a pdf although it doesn't stop my work its an annoyance to me. I uninstalled adobe and installed it again but still get this error. What can I do to fix this problem? so it says at the top "AdobeCollabSync.exe - No Disk" and the error says there is no disk in the drive. Please insert a a disk into drive E:. (I don't have an E drive though)

    You can try using this tool to first remove all traces of Reader from your computer:
    http://labs.adobe.com/downloads/acrobatcleaner.html
    Then, you can download the full offline Reader installer from
    http://get.adobe.com/reader/enterprise/
    After downloading, restart your computer and run the installer before doing anything else.

  • "itunes.exe - No disk There is no disk in the drive.

    The following message shows up whenever I open itunes:
    "itunes.exe - No disk
    There is no disk in the drive. Please insert a disk into drive\Device\harddisk1\DR2"
    Can anyone tell me what this means, and more importantly how do I make it stop?
    As long as I click on the "continue" button anywhere from 20 to 40 times, itunes will eventually open. Surely, this is not normal and it has only just begun to happen (after almost 7 years of using itunes.
    Any assistance will be greatly appreciated.
    Thank you,
    Windows 7

    If you really want to roll back to 11.4 uninstall all iTunes/Apple components, restore the pre-upgrade version of the library as described in Empty/corrupt iTunes library after upgrade/crash, then download and install from one of these direct links:
    iTunes 11.4.0.18 for Windows (32-bit) - iTunesSetup.exe (2014-09-09)
    iTunes 11.4.0.18 for Windows (64-bit) - iTunes64Setup.exe (2014-09-09)
    If you have trouble uninstalling or reinstalling see Troubleshooting issues with iTunes for Windows updates.
    Note, if you have devices running iOS 8 you cannot use any version of iTunes before 11.4.
    tt2

Maybe you are looking for

  • Print Purchase Order Document

    Hi, is there a function, that lets you print a purchase order from the system, if not , what would the best way of doing this be? I did try Function 'ME_DISPLAY_PURCHASE_DOCUMENT' which works , I belive , if the document has been printed before, but

  • Using Automator action/workflow to create a poster in iPhoto

    I'm using Jim Heid's Mac iLife 'lifeposter' idea [which comes from Mike Matas] and I keep getting a message taht says "the workflow was saved with an older version of 'get Selected items' some behavior may have changed. and also another ref. 'import

  • How to set Principal object?

    Hello, I have two web applications. The "app1" is the one we are developing and retrieving the Principal object. The "app2" is a black box web application which we have no way to modify. We can only add parameters in web.xml. The business flow is tha

  • Empty Window after File - Fileinformation - Kill required

    Hi there, in my german version of PS (12.1) for Mac (Lion 10.7.2) I face the following problem: When I chose Datei - Dateiinformationen (which is file - fileinformation) from the menu, an empty white window appears with no option to close or return t

  • To create an instance class Bean

    Interested in knowing to create an instance of class which extends TieDocument. The required values to be given to the constructur arguments. public Myclass extends Tiedocument public MyClass(LibrarySession ifs, java.lang.Long id, java.lang.Long clas