Pop-up message when Launching Firefox Mozilla

Just updated Mozilla Firefox to 3.6.10 recently, and now every time when I launch Firefox. I will receive this message: "what happened:TypeError: this.installDir is null. " on a small window. click ok than the program will launched. Noted that this happen only when 1st time launching firefox onto the PC. I have even reinstall firefox but the same result message appear.

This is caused by an add-on, see [[troubleshooting extensions and themes]] to identify which one.
I see you have the Ask toolbar, that toolbar has caused this error message for some people.

Similar Messages

  • I always get the following message when launching firefox:

    Unable to connect
    Firefox can't establish a connection to the server at www.yahoo.com.hk.
    The site could be temporarily unavailable or too busy. Try again in a few moments.
    If you are unable to load any pages, check your computer's network connection.
    If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
    I have reset firefox and reinstalled firefox, but still could not resolve the problem.

    Do you ''want'' firefox to be going to that website when it starts? Are you able to visit other websites in firefox other than yahoo.com.uk? Are you able to visit the site from another computer on the same network? Can you browse the website from the same computer but from a different browser?
    If you are able to browse other websites then it is not likely to be a problem with Firefox, but is more likely the website itself or a problem with the DNS resolution being used by your computer network.
    If you cannot browse other websites this is most likely a networking problem rather than a Firefox problem.
    If you can do what you are trying to do in another browser on the same system, but not in Firefox, then this is more interesting and you need help with Firefox, but please check and make sure it is a problem with Firefox first.

  • Followed the download and install for firefox into my linux home directory. When launching firefox got an error message about a mission shared object. Additional detail to follow.

    When launching firefox got the following error: XPCOMGlueLoad error for file ~/firefox/libxpcom.so libxul.so cannot open shared object file: No such file or directory Couldn't load XPCOM (but file libxul.so is there) what do I do???

    Make sure that you meet the system requirements and have all required libraries installed.
    *http://www.mozilla.com/en-US/firefox/8.0.1/releasenotes/
    *http://www.mozilla.com/en-US/firefox/3.6.24/releasenotes/
    *http://kb.mozillazine.org/Installing_Firefox#Linux
    You can find the latest Firefox releases here:
    *Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
    *Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html

  • Error message when starting firefox

    since I've installed the latest update (firefox 4.0.1) I get the following error message when starting firefox:
    '''Type Error: Components.classes [TvPwm Component_CID] is undefined'''
    I must then click on OK to get firefox to open => very annoying!
    I'm using a ThinkPad laptop and the passwordvault which was perfectly available in the older version of firefox don't open in tools any longer, when forced via lenovo thinkpad tool, it daoesn't launch the asked for site either.
    Thanks for helping me.
    Claudia

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    *Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • Error when launching Firefox

    Hi; I’m experiencing a problem when launching Firefox . Receive the following message;
    Firefox can't establish a connection to the server at en-gb.start3.mozilla.com
    I’ve removed and reloaded Firefox, but same problem.
    The only thing I can think of that’s changed on the PC is that I’ve renewed & McAfe AntiVirus Plus (which also had to be removed then reloaded).
    Any suggestions as to what’s the problem & how to fix?

    I've tried checking the firewall issue; removed and reinstalled Firefox several time; run multiple anti-virus programs looking for issues; and it still doesn't work. However, today Google Chrome began working as my internet connection; and it works beautifully using Firefox (Go figure!). However, when I again reinstalled the actual Firefox program, it still does not work; so I have once again removed it. I find this very interesting.

  • Error message when starting Firefox 8 that says: TypeError: Components.classes[TvtPwmComponent_CID] is undefined

    error message when starting Firefox 8 that says:
    TypeError: Components.classes[TvtPwmComponent_CID] is undefined
    I am using Window 7 64 bit

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    *Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • Firefox does not open at all - error message when loading firefox 'The instruction "0x0000000" referenced memory at "0x0000000". The memory could not be "written". Click on OK to terminate the program in English

    I cannot open firefox at all. I have removed and re-installed but it has made no differenct. I just get an error message when loading firefox - as follows - 'The instruction "0x0000000" referenced memory at "0x0000000". The memory could not be "written". Click on OK to terminate the program.
    Can anyone help me sort this out? If I log in as someone else Firefox works?
    == This happened ==
    Every time Firefox opened
    == the computer shut down unexpectedly ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    You can o a malware check with a few malware scan programs.<br />
    You need to use all programs because each detects different malware.<br />
    Make sure that you update each program to get the latest version of the database before doing a scan.<br />
    * http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    * http://www.superantispyware.com/ - SuperAntispyware
    * http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    * http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    * http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

  • The operation can not be completed because of an internal failure. A secure network communication has not been cleaned up correctly ... Iget this message when closing firefox. It obviously has been a problem in the past but I'm using FF 6

    '''"The operation can not be completed because of an internal failure. A secure network communication has not been cleaned up correctly ... '''"Iget this message when closing firefox. It obviously has been a problem in the past for others but it has only happened to me since updating to firefox6'''

    Try to clear the "Active Logins" via Clear Recent History
    *https://support.mozilla.com/kb/Clear+Recent+History
    You can also try to delete the file secmode.db in the Firefox Profile Folder
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *Help > Troubleshooting Information > Profile Directory: Open Containing Folder

  • When launching Firefox(5.0) there are always two TABS that open.

    When launching Firefox(5.0) there are always two TABS that open, one with "What's new in Firefox" and other my homepage. Can't it be adjusted to open only one TAB (Homepage) and not the other one?

    See these articles for some suggestions:
    * https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
    * https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
    * http://kb.mozillazine.org/Preferences_not_saved

  • Oops! Error msg when launching Firefox

    Just installed Firefox 3.6 on my sister's computer. When launching Firefox a msg box pops up ( on what appears to be a Google page ) that says Oops! Firefox could not find www.download-services.net
    Did not even try to access this site, but Firefox automatically does.
    Couple of things we already tried were:
    Completely Uninstalling a very old version of Firefox she already had
    Uninstalling the Google toolbar using Add/Remove programs ( but it's still there? )
    Uninstalled and re-installed Firefox 3.6 two times
    Still get this msg box.
    Also, tried to set AOL as homepage and it will not take
    Please advise. Thanking you in advance!

    I've tried checking the firewall issue; removed and reinstalled Firefox several time; run multiple anti-virus programs looking for issues; and it still doesn't work. However, today Google Chrome began working as my internet connection; and it works beautifully using Firefox (Go figure!). However, when I again reinstalled the actual Firefox program, it still does not work; so I have once again removed it. I find this very interesting.

  • Get this message when starting Firefox 5.0: procedure entry point CERT_FindSubjectKeyIDExtension could not be located in the dynamic link library nss3.dll

    get this message when starting Firefox 5.0: procedure entry point CERT_FindSubjectKeyIDExtension could not be located in the dynamic link library nss3.dll

    Hi,
    You can try to install the latest version over the current one: https://www.mozilla.org/en-US/firefox/new/

  • Suppress add-on dialog when launching Firefox

    When launching Firefox with new extensions installed, it comes up with a dialog box telling of the new extensions. I'd like a way to completely suppress this for our users, as we (in IT dept) already know it was installed and don't need our users to see anything about it.
    Is there a way to completely suppress the add-on dialog so it doesn't come up at all? Maybe a command-line switch, javascript extension, or setting in an ini file?
    Target is Debian and Ubuntu Linux with Firefox 3.6.
    thanks!

    This is stupid. Not only is the way to install plugins now basically a hack (unzipping an xpi file into a dir? really?), but getting rid of the notification is as well. I came up with three ways around this problem: a) install all plugins right after a fresh install, before any profile dirs are created, b) remove all profile directories, or c) edit the prefs.js file for the desired profile. Option "a" is obviously easiest but not always doable.
    to fully automate on linux for option b (assuming kioskfox-0.4-fx.xpi is your extension file):
    mkdir kf
    unzip kioskfox-0.4-fx.xpi -d kf/
    sudo mv kf /usr/lib/firefox-addons/extensions/`cat kf/install.rdf |grep em:id|head -1 | cut -d '>' -f 2|cut -d '<' -f 1`
    rm -rf /home/*/.mozilla/firefox/*default
    alternate to an rm -rf for option c (if firefox has been started already, and this line appears in the prefs.js):
    mv /home/<user>/.mozilla/firefox/*default/prefs.js /home/<user>/.mozilla/firefox/*default/prefs.js.orig
    cat /home/<user>/.mozilla/firefox/*default/prefs.js.orig | grep -v "extensions.newAddons" > /home/<user>/.mozilla/firefox/*default/prefs.js
    dork around with it a bit to understand what I'm doing, to make sure you don't mess yourself up. obviously if you don't use the default profile, change *default to whatever the profile is named.
    hth

  • Uninstalled Old PS Versions - Now Get "One Or More File. . .etc" Error Message When Launching PS CC

    I just unistalled PS C3 through 6 on my computer leaving only PS CC for use going forward.  Having done this I now get this error message when launching PS CC:  "One or more files in the Adobe Application Support folder, necessary for running Photoshop, are missing.  Please run the Photoshop installer and re-install Photoshop."  The thing is PS CC still appears to be working okay once that error message is cleared.  How can I get rid of that error message?  I can't reinstall using the CC Updater because it still sees PS CC on the system thus it won't install another copy.  I'd just as soon not uninstall it and I'm not sure that would fix the issue anyway.
    Any ideas?

    Hi jpolster,
    You can uninstall PS CC through the Control Panel in windows/Utilities in MAC & the reinstall PS CC.
    Thanks

  • When launching firefox, it no longer goes to my homepage. It goes to the last page visited while on line! Help??

    When Launching Firefox it used to automatically go to my homepage! It no longer does, it goes to the last page visited on the web!
    == This happened ==
    Every time Firefox opened
    == it just started a few days ago!! Not sure why!

    Check
    Tools > Options > General > When Firefox starts ....

  • Pop up message when saving document with document set

    Hi
    I want to display a pop up message when a user saves a document of a particular Content Type in a document set.
    How can this be done ?
    Thanks

    Hi,
    According to your post, my understanding is that you wanted to pop up a message when saving document.
    To achieve it, you should custom the edit form page.
    You can use the SharePoint Designer
    to customize the behavior of the "save" button.
    You should add the "onclick" method to the submit button, and put your JavaScript there.
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/9d830f96-693a-438d-a5c8-005d1e86b578/how-to-show-a-popup-box-before-saving-properties-for-a-document-in-document-library?forum=sharepointdevelopmentlegacy
    You can also use the event receiver, when the files have been uploaded or edited to call the event receiver to open a pop up dialog.
    Thanks,
    Jason
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Jason Guo
    TechNet Community Support

Maybe you are looking for

  • Can I use iTunes 7.4.3 Restore Disks to transfer/mirror PC to LTop library?

    I have 2 libraries for my Ipod Touch. One on my home PC,(with my downloaded personal CD collection)+ purchased Content. The other on my work Laptop with only Purchased Content I have been a able to transfer via Ipod. Here is my question, instead of c

  • Keep songs on the ipod, but not itunes

    How do I keep stuff on my ipod, but not on my computer?

  • Steps to upgrade dbconsole from 10.2.0.1 to 10.2.0.4

    Hi All, I am using oracle 10gR2 base version - 10.2.0.1. My collegue has upgrade it to 10.2.0.4. So when I login to the database and check the comp_name,status and version it showing me 10.2.0.4 for all componets and from v$version it showing 10.2.0.

  • Sound through TV Speakers?

    I connect my MacBook Pro to my TV, but now the sound won't come through the TV speakers. Before when I had this problem, I would click Display, then click Detect Display and it would fix, but that doesn't work anymore. What else can I try?

  • ABAP for file transfer

    Hi all, I'm looking for an function module to extract the data out of an internal table like the active table of an ODS to the BW server. I know the GUI_download, but it passes the data to the client. Any ideas. Cheers Pascal