POP UP needed for an ERROR while performing an action

Hello Experts,
I need your help in creating a pop up for an error that occurs while performing an action and the value for a certain field in an infotype is incorrect. Right now the error just gets displayed in the bottom of the screen. Immediate responses would be highly appreciated!

check here http://scn.sap.com/community/erp/hcm/employee-self-service/blog/2013/12/02/how-to-show-pop-up-s-in-wda-hcmpf http://scn.sap.com/thread/3497688

Similar Messages

  • Error while performing Exit Action

    Hi All,
    Getting error message "Organization Reassignment not permitted" while performing the exit action. I have checked the personnel area attributes and everything seems to be same. But in the infotype view indicator it is showing the value as 10.
    Can  we change  IVWID value in se16 - > pa0003 table to 40 instead of 10. If yes can anyone tell me how to do it..  By doing this will the error message "Organization reassignment not permitted" will be resolved?
    I have read the documentation of the error and i feel it seems to be the issue of "IVWID"..
    Can this be dealt with????
    Regards,
    Srikanth

    Hi Mohan,
    The information provided by you was very helpful. Thanks a lot for your quick responses..
    Tthe entries in IVWID feauture for country grouping india is 40 . The value defaulted is correct. Is there any other way where we can change the infotype view indicator to 40 instead of 10..
    Can you suggest me a solution which would not impact other application's...
    Regards,
    Srikanth

  • Error while performing Risk Analysis at user level for a cross system user

    Dear All,
    I am getting the below error, while performing the risk analysis at user level for a cross system (Oracle) user.
    The error is as follows:
    "ResourceException in method ConnectionFactoryImpl.getConnection(): com.sap.engine.services.connector.exceptions.BaseResourceException: Cannot get connection for 120 seconds. Possible reasons: 1) Connections are cached within SystemThread(can be any server service or any code invoked within SystemThread in the SAP J2EE Engine), 2) The pool size of adapter "SAPJ2EDB" is not enough according to the current load of the system or 3) The specified time to wait for connection is not enough according to the pool size and current load of the system. In case 1) the solution is to check for cached connections using the Connector Service list-conns command, in case 2) to increase the size of the pool and in case 3) to increase the time to wait for connection property. In case of application thread, there is an automatic mechanism which detects unclosed connections and unfinished transactions.RC:1
    Can anyone please help.
    Regards,
    Gurugobinda

    Hi..
    Check the note # SAP Note 1121978
    SAP Note 1121978 - Recommended settings to improve peformance risk analysis.
    Check for the following...
    CONFIGTOOL>SERVER>MANAGERS>THREADMANAGER
    ChangeThreadCountStep =50
    InitialThreadCount= 100
    MaxThreadCount =200
    MinThreadCount =50
    Regards
    Gangadhar

  • DPM encountered an error while performing an operation for \\?\Volume{fc1f0549-9865-4349-b4df-8596a19ad7fe}\FolderPath\Work\ on FileServer (ID 2033 Details: The system cannot find the path specified (0x80070003))

    DPM encountered an error while performing an operation for \\?\Volume{fc1f0549-9865-4349-b4df-8596a19ad7fe}\FolderPath\Work\ on FileServer (ID 2033 Details: The system cannot find the path specified (0x80070003))
    Can I know what this mean? It completely fail all entire job.
    Backup was on half way go, it already took about 3TB data and it fail.

    Hi Oneoa,
    Please verify the antivirus exeptions. Look at this two links for more information:
    http://technet.microsoft.com/en-us/library/ff399439.aspx
    http://support.microsoft.com/kb/928840
    I hope this solves your problem, please post your progress so I may assist you further.
    Best Regards
    Robert Hedblom
    MVP DPM
    Check out my DPM blog @ http://robertanddpm.blogspot.com

  • Error while performing Oracle 11g upgrade

    Hi,
    I am facing error while performing an Oracle upgrade from 10.2.0.4 to 11.2.0.2.
    DBUA was disconnected with error Ora 1092 Oracle instance terminated.
    When tried to run manual upgrade it is showing the below error,
    SQL> @catupgrd.sql
    DOC>#######################################################################
    DOC>#######################################################################
    DOC>
    DOC> The first time this script is run, there should be no error messages
    DOC> generated; all normal upgrade error messages are suppressed.
    DOC>
    DOC> If this script is being re-run after correcting some problem, then
    DOC> expect the following error which is not automatically suppressed:
    DOC>
    DOC> ORA-00001: unique constraint (<constraint_name>) violated
    DOC> possibly in conjunction with
    DOC> ORA-06512: at "<procedure/function name>", line NN
    DOC>
    DOC> These errors will automatically be suppressed by the Database Upgrade
    DOC> Assistant (DBUA) when it re-runs an upgrade.
    DOC>
    DOC>#######################################################################
    DOC>#######################################################################
    DOC>#
    DOC>######################################################################
    DOC>######################################################################
    DOC> The following statement will cause an "ORA-01722: invalid number"
    DOC> error if the user running this script is not SYS. Disconnect
    DOC> and reconnect with AS SYSDBA.
    DOC>######################################################################
    DOC>######################################################################
    DOC>#
    no rows selected
    DOC>######################################################################
    DOC>######################################################################
    DOC> The following statement will cause an "ORA-01722: invalid number"
    DOC> error if the database server version is not correct for this script.
    DOC> Perform "ALTER SYSTEM CHECKPOINT" prior to "SHUTDOWN ABORT", and use
    DOC> a different script or a different server.
    DOC>######################################################################
    DOC>######################################################################
    DOC>#
    SELECT TO_NUMBER('MUST_BE_11_2') FROM v$instance
    ERROR at line 1:
    ORA-01722: invalid number
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    Please help ASAP as this is a production system.
    Thanks,
    Prabhakar
    Edited by: prabhakaryc on Jun 19, 2011 2:47 PM

    prabhakaryc wrote:
    Hi Orkun Gedik,
    >
    > Thank you for your quick reply.
    >
    > Yes i am running this on windows and i have set with correct ORACLE_HOME (11202 directory)
    >
    > Do you think any other reason ? 
    >
    > I have seen this error log inside of catupgrd.sql and it seems to be very known error but i am not finding the solution anywhere ?
    >
    > Your quick reply helps me a lot.
    >
    > Thanks,
    > Prabhakar
    Hi Prabhakar,
    >> DBUA was disconnected with error Ora 1092 Oracle instance terminated.
    But, as far as I understand that you didn't completed DB upgrade succesfully. Under this circumstance, you shouldn't change ORACLE_HOME variable to 11.2.0.2. I suggest you that complete Oracle upgrade (restart DBUA) and do not execute upgrade procedures, manually.
    Best regards,
    Orkun Gedik

  • System is giving ABAP run time error while perform LT06 or create TO with r

    Hi SAP WM Gurus,
    System is giving ABAP run time error while perform LT06 or create TO with respect to posting change notice, below are runtime analysis details.
    Short dump has not been completely stored. It is too big.
    P_MENGA = P_MENGE.
    007940       P_UMREZ = 1.
    007950       P_UMREN = 1.
    Can you give any idea on this issue.
    Thanks and Regards,
    SHARAN.

    Hi,
    Go to Tcode ST22 and mentione the dump code there and check.
    Also take help[ of Abapers to fix it.
    Thanks
    Utsav

  • ABAP run time error while perform LT06 or create TO with respect to posting

    Hi SAP WM Gurus,
    System is giving ABAP run time error while perform LT06 or create TO with respect to posting change notice, below are runtime analysis details.
    >> Short dump has not been completely stored. It is too big.
    >       P_MENGA = P_MENGE.
    007940       P_UMREZ = 1.
    007950       P_UMREN = 1.
    Can you give any idea on this issue.
    Thanks and Regards,
    SHARAN.

    This part is just the place in the program where the error occured, but why the error occured is mentioned earlier in the dump.
    Maybe you have a too big number in the field and hence a field overflow, maybe you have a character instead of a number in the field.
    Read the dump from the beginning. if you dont know how to read a dump,then try to get help from any local Abaper.

  • Error  while performing Organisational Assignment

    Hi ,
          Administrators -  Rec, Pay, Tim have been created in the group Spb.
    While performing  the action - organisational assignments rec(personnel admin), Tim (time), pay(payr admin)  of the group spb have been assigned to subarea - 225, Business area-224 and  payroll area-46
    The error is found to be 225rec does not exist in T526 entry.
    Thanks
    Gracy

    hi Gracy,
    Maintain the adminstror 225 in the table T526 through sm30-maintain.
    If any let us know.
    Regards,
    sai.

  • Dump error while running termination action

    I'm facing a dump error while running termination action, please, if some one wud help me out of this error. here when im termination action the system is opening action infotype when given the date of termination and try to save, system shows a warning message that "Record valid from 08.08.1995 to 31.12.9999 delimited at end" then I press enter and system is asking me to save. when I do so, rather than it taking me to another screen its throwing a dump error.
    Runtime Errors         SYNTAX_ERROR
    Date and Time          21.10.2008 18:54:05
    Short dump has not been completely stored (too big)
    Short text
         Syntax error in program "SAPLCACS_BU_PARTNER ".
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "SAPLBUD_CHECK" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
         The following syntax error occurred in program "SAPLCACS_BU_PARTNER " in
          include "LCACS_BU_PARTNERU44 " in
         line 19:
         "The key of internal table "LT_BUT0BK" contains components of type "X" "
         "or "XSTRING". The "READ TABLE LT_BUT0BK" statement is not permitted fo"
         "r such tables in a Unicode context."
         The include has been created and last changed by:
         Created by: "SAP "
         Last changed by: "SAP "
         Error in the ABAP Application Program
         The current ABAP program "SAPLBUD_CHECK" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
    Error analysis
         The following syntax error was found in the program SAPLCACS_BU_PARTNER :
         "The key of internal table "LT_BUT0BK" contains components of type "X" "
         "or "XSTRING". The "READ TABLE LT_BUT0BK" statement is not permitted for
    "r such tables in a Unicode context."
    ger Location of Runtime Error
    Program                                 SAPLBUD_CHECK
    Include                                 LBUD_CHECKF01
    Row                                     1.129
    Module type                             (FORM)
    Module Name                             RLDEL_CHECK
    ce Code Extract
      SourceCde
    9
    0 *------ ... Funktionsbausteine ermitteln -
    1   CALL FUNCTION 'BDT_TBZ1F_GET'
    2     EXPORTING
    3       iv_objcn  = gc_objcn_bupa
    4       iv_objap  = gc_objap_bupa
    5     TABLES
    6       et_tbz1f  = lt_tbz1f
    7     EXCEPTIONS
    8       not_found = 1
    9       OTHERS    = 2.
    0   READ TABLE lt_tbz1f INDEX 1.
    1   IF sy-subrc = 0.
    2     CALL FUNCTION 'BUP_PARTNER_GET'
    3       EXPORTING
    4         i_partner    = is_but100-partner
    5         i_cp_exclude = gc_x
    i_is_exclude = gc_x
    PORTING
    e_but000_int = ls_but000_int
    CEPTIONS
    OTHERS       = 1.
    ... Funktionsbausteine aufrufen -
    T lt_tbz1f WHERE     ztpkt =  'RLDEL'
                 AND NOT fname IS INITIAL.
    Datümer alt = neu = SPACE => Löschung, sonst Update -
    (Einschränkung der Gültigkeit)
    FUNCTION lt_tbz1f-fname
    PORTING
    i_partner        = is_but100-partner
    i_partnerguid    = ls_but000_int-partner_guid
    i_role           = is_but100-rltyp
    i_dfval          = is_but100-dfval
    i_calltp         = iv_calltp
    i_valid_from     = is_but100-valid_from_dats
    i_valid_from_old = iv_valid_from_old
    i_valid_to       = is_but100-valid_to_dats
    i_valid_to_old   = iv_valid_to_old
    PORTING
    e_result         = lv_result.
    ... Ergebnis merken, wenn höher als bisheriges Zwischenergebnis-
    v_result > gv_wu_result.                          "#EC PORTABLE
    wuresult = lv_result.
    F.
    ... Ergebnis ist 'Nicht löschen': Zeitpunkt abbrechen -

    HI Mallik,
    for termination action the operation that i've set is
    lis9  0001
    cop  0002
    lis9  0007
    cop  0008
    lis9  0014
    lis9  0015
    lis9  0587
    so just want to know if the set format for termination action is right
    and other option is that if there is some change to settings of infotype charateristics in table v_t582A this may cause change in the date that is cause of error.
    can u please suggest the above alignment of operations and infotype is right and provide me the idle settings for infotype characteristics which may solve my query.
    thanks mallik.

  • Need Urgent help Error while retrieving a password for credential: ReaderRi

    I am receving the following error while deploying my web dynpro application containig a adobe form .The issue is that when i perform teh following test
    Enter the following URL in the browser
    http://<server>:<port>/AdobeDocumentServices/Config
    The web page of the web service AdobeDocumentServices is displayed. Choose Test.
    Choose rpdata(test…)
    Choose the Send button without entering any parameters
    Enter the user name and password
    User Name: ADSUser
    Password: <Your admin password>
    Choose Submit
    I get the version number
    but when i deploy the application i get this eror
    com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: Failed to  UPDATEDATAINPDF
         at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:398)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.afterApplicationModification(ClientApplication.java:1132)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.afterApplicationModification(ClientComponent.java:887)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doRespond(WindowPhaseModel.java:573)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:152)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:752)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:705)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:154)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: PDFDocument Processor failed to process Render Request.
         at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentProcessor.process(PDFDocumentProcessor.java:55)
         at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentInteractiveFormHandlingContext.execute(PDFDocumentInteractiveFormHandlingContext.java:98)
         at com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentInteractiveFormHandlingContext.execute(PDFDocumentInteractiveFormHandlingContext.java:121)
         at com.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:342)
         ... 29 more
    Caused by: com.sap.tc.webdynpro.pdfobject.core.PDFObjectRuntimeException:
    Processing exception during a "UsageRights" operation.
    Request start time: Wed Oct 03 14:43:25 PDT 2007
    com.adobe.ProcessingError: Error while retrieving a password for credential: ReaderRights

    Hi Namit,
    Have you installed a credential file to your ADSServer?
    This is required to apply the usageRights onto the PDF.
    You need to install the ReaderRights credential file. Follow the steps from this URL:
    Re: Interactive form application error
    Make sure that the password and the expiry date of the ReaderRights credential file are valid.
    Hope this helps.

  • Error while performing LSMW or SHDB for KE52

    HI,
    I am facing problem in LSMW or SHDB for Ke52, whenever i am processing more than one record with BDC, the screen defaults the record profit center for the next records also skipping the first screen of KE52.
    I need to change profit center group for profit centers.. this is mass change more than 7000 profit centers. I need to do this with LSMW or SHDB.. but system not processing properly.
    can anyone guide me on this.
    Thanks
    Pragya

    Hi Abhishek,
    Thanks for the reply, BAPI's can be used. but now my problem solved. We have used SHDB for changing profit center or cost center. we have used a macro for this and while recording first we have used T code OKKS to default the controlling area and then used KE52 for changing profit center. It worked.
    Thanks
    Pragya
    Edited by: Pragyam on Jan 14, 2012 10:17 AM

  • Connection error while performing basic settings SOLMAN 4.0 SP12

    Hi All,
    We are currently facing a problem while performing Solution Manager 4.0 (SP12) basic configurations through the IMG Wizard. Within the "Initial Configuration Part I" section, an error while connecting to SAP is obtained (This is the full error message "Error creating communication to SAP Service and Support"). After checking at TX SM59, it was noticed that the RFC connections SAP-OSS y SAP-OSS-LIST-O01 (what are supposed to be created in previous steps by copying SAPOSS connection) were no created. We created them both manually (also tested) and everything was ok. We started the Wizard again, and the same error was obtained. However, it was noticed that the SAP-OSS RFC connection had been deleted. The system log shows the following:
    00789 - Dialog work process  No. 000 - XXXXXX - EQUIPO - 1 - SM_CONFIG_WZ - M_CONFIG_WZ_START - T - Transaction Problem - STSK
    The same scenario occurs every time the above wizard is used.
    It worth to mention that the SAPOSS connection works fine and also, just to perform a test, I was able to download a note correction through the SNOTE transaction.
    Where should I check to see what is causing this connection error? Do I missing a previous configuration step?
    Also, would be very helpful for us to get an step by step reference guide for SM configuration. We want to be sure we are no missing or mixed up anything.
    Thanks so much for your help.
    Regards

    >
    diego77 wrote:
    > We are currently facing a problem while performing Solution Manager 4.0 (SP12) basic configurations through the IMG Wizard.
    Why do you start configuration for SP12, although most current version is SolMan 7.0 EhP1 SPS19?
    What scenarios / functions are you planning to use?
    Best regards,
    Ruediger

  • JCAActivationAgent::load - Error while performing endpoint activation:java.

    Hi,
    I am getting following error while deploying a BPEL process. This is very surprising because the process used to run fine until yesterday. Also for some time I was getting a funny error - the JDev was not able to "read" a wsdl file on local machine. I restarted the server, machine many times but it did not help. I do not have any proxies set and the file resides on my local harddrive.
    <2006-04-11 11:30:20,090> <ERROR> <default.collaxa.cube.activation> <AdapterFramework::Inbound> JCAActivationAgent::load - Er
    ror while performing endpoint activation:java.lang.NullPointerException
    <2006-04-11 11:30:20,090> <ERROR> <default.collaxa.cube.activation> <AdapterFramework::Inbound>
    java.lang.NullPointerException
    at oracle.tip.adapter.fw.agent.jca.JCAActivationAgent.load(JCAActivationAgent.java:208)
    at com.collaxa.cube.engine.core.BaseCubeProcess.loadActivationAgents(BaseCubeProcess.java:931)
    at com.collaxa.cube.engine.core.BaseCubeProcess.load(BaseCubeProcess.java:302)
    at com.collaxa.cube.engine.deployment.CubeProcessFactory.create(CubeProcessFactory.java:66)
    at com.collaxa.cube.engine.deployment.CubeProcessLoader.create(CubeProcessLoader.java:391)
    at com.collaxa.cube.engine.deployment.CubeProcessLoader.load(CubeProcessLoader.java:302)
    at com.collaxa.cube.engine.deployment.CubeProcessHolder.loadAndBind(CubeProcessHolder.java:881)
    at com.collaxa.cube.engine.deployment.CubeProcessHolder.getProcess(CubeProcessHolder.java:789)
    at com.collaxa.cube.engine.deployment.CubeProcessHolder.loadAll(CubeProcessHolder.java:361)
    at com.collaxa.cube.engine.CubeEngine.loadAllProcesses(CubeEngine.java:960)
    at com.collaxa.cube.admin.ServerManager.loadProcesses(ServerManager.java:284)
    at com.collaxa.cube.admin.ServerManager.loadProcesses(ServerManager.java:250)
    at com.collaxa.cube.ejb.impl.ServerBean.loadProcesses(ServerBean.java:219)
    at IServerBean_StatelessSessionBeanWrapper14.loadProcesses(IServerBean_StatelessSessionBeanWrapper14.java:2399)
    at com.collaxa.cube.admin.agents.ProcessLoaderAgent$ProcessJob.execute(ProcessLoaderAgent.java:395)
    at org.quartz.core.JobRunShell.run(JobRunShell.java:141)
    at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:281)
    <2006-04-11 11:30:20,152> <ERROR> <default.collaxa.cube.engine.deployment> <CubeProcessLoader::create>
    <2006-04-11 11:30:20,152> <ERROR> <default.collaxa.cube.engine.deployment> Process "CallHomeBPEL" (revision "1.0") load FAILE
    D!!
    <2006-04-11 11:30:20,230> <ERROR> <default.collaxa.cube.engine.deployment> <CubeProcessHolder::loadAll> Error while loading p
    rocess 'CallHomeBPEL', rev '1.0': Error while loading process.
    The process domain encountered the following errors while loading the process "CallHomeBPEL" (revision "1.0"): null.
    If you have installed a patch to the server, please check that the bpelcClasspath domain property includes the patch classes.
    Please help.

    Finally , I was able to redeploy the process. After comparing new files with old files I observed an activationAgents entry in bpel.xml, which was not present previously.
    <activationAgents>
    <activationAgent className="oracle.tip.adapter.fw.agent.jca.JCAActivationAgent" partnerLink="CallHomeFileUtility">
    <property name="portType">Read_ptt</property>
    </activationAgent>
    </activationAgents>
    when I removed this from bpel.xml the process deployed successfully. Not sure when the <activationAgents> is added to bpel.xml
    Thanks for your inputs.

  • Error While performing Budget Write Back using ERPi

    Hi,
    We are getting the following error while Importing the data for Budget Write back using ERPi.
    "va.lang.Exception: Cannot get the olap server name for planning application GSECPLAN
    ERPI Process Start, Process ID: 187
    ERPI Logging Level: DEBUG (5)
    ERPI Log File: C:\Users\HYP_SV~1\AppData\Local\Temp\2\/aif_601_187.log
    Jython Version: 2.5.1 (Release_2_5_1:6813, Sep 26 2009, 13:47:54)
    [Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)]
    Java Platform: java1.6.0_29
    Call Servlet - START
    Call Servlet - END
    ERPI Process End, Process ID: 187"
    The Write-back was working fine and we have done the write back successfully few days back. We have not made any changes in write back set up except some mapping.
    Any clue on this issue?
    Thanks & Regards,
    Sunil.

    Thanks John for your response.
    I have already restarted the planning service and checked. But no luck.
    Regards,
    Sunil.
    Edited by: 926629 on May 7, 2013 12:26 AM

  • Error while performing Master Data transfer from SAPR/3- ECC5.0 to SCM4.1

    Hi all,
    Am getting an error while transfering Master data from SAP R/3 system ECC5.0 to SCM4.1 through Core Interface (CIF).
    After creating an Integration model and while activating the same am getting the following error,
    " System: SCMCLNT800    User:  SMART03 06/17/2006 13:32:14
    Function: /SAPAPO/CIF_LOC_INBOUND
    Text:Error in address data for location DC2000/ECC800 "
    Could anyone provide me how to fix this?.
    Regards
    Bharanidharan

    Hi Veera,
    Am sorry for the delayed response. Well am using XI as integration engine for transfer of transactional data from R/3 to SCM4.1. I resolved this issue which was because of master data problem. Thanks for your input.
    Regards
    Bharanidharan

Maybe you are looking for

  • Wireless radio not working contact HP support?? call whom? for Photosmart 309a

    I have reinstalled the software and verified the network is working and all other functions work on printer including USB hookup.  Message sent after testing.. "The wireless radio is not functioning. Contact HP support.  THis is my last try before tr

  • Management and AP Manager on Different Subnets ...

    Hello, I am getting ready to implement a WLAN where the customer has designed the Management and AP Manger to be on different subnets.  I have never done a WLAN implementation in this manner because per Cisco's config guide it states ... "The AP-mana

  • Need to create PIR using One Time Vendor

    Hi experts, I need to create Purchase Info. Record using One Time vendor (OTV) as the PIR field in PO is mandatory and as per the client requirement, this field cannot be changed to optional.  Is there any possibility to create PIR using OTV. Thanks

  • Convert runtime error to failure

    I am using the ProcessModelPostStepRuntimeError model callback to handle any errors in my system. Some of the errors that occur are actually caused by a faulty UUT and I would like then to be reported as a failure and not an error. Is there an easy w

  • I can't access older emails on Hotamail and I can't see photos on peoples Facebook pages

    I can only see emails on the current screen of Hotmail, I cannot go to older emails. Also, I cannot view photos on Facebook pages. When it says "view album", only empty squares appear.