POP UP Occurs when i cancel ESS... how to deactivate this?

Hello there,
i have a Problem in our Consolidation Portal.
We deployed SP18 in the Portal.. after that we have now a Problem in our ESS...
When i go to ESS and fill in some DATA and Click CANCEL (German: Abbrechen)
A Pop Up Occurs:
http://img13.imageshack.us/my.php?image=portal.jpg
As you see in the Image above...
In out Testsystem the Pop Up do NOT occur... But i cant find the config where i can config this...
I want that the POP Up NOT occurs.. when i click on cancel it should be load the entry site...
Thanks for your help
Regards
Bjoern

Careful with doing that. It is meant to save users from themselves. haha

Similar Messages

ITunes could not connect to iTunes store. An unknown error occurred (-3212) - Does anyone know how to fix this?

iTunes could not connect to iTunes store. An unknown error occurred (-3212) - Does anyone know how to fix this? I've tried alot of solutions and nothing seems to be working at all
Each time I try to connect to the iTunes store, this has popped up. I googled error (-3212) and also followed the steps on iTunes support. I downloaded the new itunes and chose "repair files" all to no prevail. I use iTunes on a daily basis and bought and iTunes card 2 weeks ago which I now cannot use. Does anyone know how to fix this?

Just in case, let's try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Invisible windows appears when trying to open a new window. These windows are listed in the Window list, but I cannot switch to them or close them. This also occurs when I try to "View Source". This was not a problem prior to my 6.0 upgrade.

I cannot open a new window for FireFox.
Invisible windows appears when trying to open a new window. These windows are listed in the Window list on the menu, but I cannot switch to them or close them. This also occurs when I try to "View Source". This was not a problem prior to my 6.0 upgrade.
The Downloads Window cannot be accessed either.
This is very annoying. Is this a bug? Or is there a fix.

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

My iMac has died with a copy of Creative Suite 5.5 on it, can anyone tell my how to deactivate this copy so I can install on another Mac?

My iMac has died with a copy of Creative Suite 5.5 on it, can anyone tell my how to deactivate this copy so I can install on another Mac?

Contact support by web chat to reset activations.
Mylenium

When I click Convert to Word docx, I receive the error message -- "An error occured when trying to access the service." This has been happening for about a week.

Export PDF will not convert a pdf to MS Word. This failure has been going on for about a week. The error message is "An error occurred when trying to access the service." What can I do to get this working again?

Hi,
It seems it was working fine earlier.
Is this happening with all files?
You can try using different browser.
Regards,
Florence

I forgot my password for my account and the email doesn't work anymore, and the message to sign into FaceTime keeps popping up every time I cancel it, how do I get it to stop?

I forgot my password for my accounts and a message keeps popping up and won't go away or let me use my iPad, how do I get my iPad back to normal?

Go to iforgot.apple.com to recover the password for the Apple ID.

Mandatory field validation error occurs when user cancels out of blank "cre

Hi - I'm building an application using Oracle 10g 9.0.5.2, with ADF/UIX/Struts.
I followed the technique described in the tutorial
http://otn.oracle.com/obe/obe9051jdev/uixtutorial/lesson_uix.htm
In that example they have a page called BrowseDeptEmp. On this page is a
create button, which is linked to a /createEmpAction before displaying the
FormEmp uix page, where the user is supposed to enter new employee data.
So I did the same thing, but I added a cancel button on the FormEmp.uix page.
If the user presses cancel on the FormEmp page, it goes through a 'rollback' DataAction (with a rollback operation dragged on it) and then back
to the main page.
here's my problem:
If the user
1. clicks the create button on the BrowseDeptEmp page
2. Sees the blank form in the FormEmp page
3. Changes his mind (does not want to add a new employee) and clicks cancel
The FormEmp page displays validation errors on the fields that are mandatory in the DB! So the user
can't cancel out of the create page unless he fills in the mandatory fields...!!
How do I cancel out of a create page 1) without entering any data on the page and 2) without getting
mandatory field validation messages?
It must be simple but i can't figure it out....
Please help :)
Thanks
Des

I don't understand how this can happen if the user has not entered any data.
Is there a commit action somewhere that is being triggered before the rollback?
is your cancel button a submit button?
one way to fix this is to convert the submit button into a
regular button and have the regular button go directly to your DataAction (the one with the rollback).
you can automatically create this button by drawing a pageLink from the page to the DataAction in the page flow diagram.

Ipad 4 opens app store when yahoo finance. How to stop this?

When I am browsing Yahoo Finance, the app store opens up all by itself. Why? How to make it stop?

Thank you for your fast and informative and friendly reply. Your solution is confirmed by disabling javascript in Safari, which solves the problem.
My guess is that there are other people who are more irritated than myself who have already filed complaints with the website.
I did google this, and first thing I tried was to thoroughly de-grime the display. That solved nothing, except making the glass look (temporarily) nicer.
Again, thank you!

Tabs on Top option doesn't show up in the pop-up menu when I Control-click on an empty section of the Tab Strip in Firefox 15 on MacBook.

I just updated my Firefox web browser to version 15.0 on my MacBook. I am really used to have Tabs under Address Bar. However, when I Control-click on an empty section of the Tab Strip, there is no "Tabs on Top" option in the pop-up menu.
Any suggestion on how to find this option would be appreciated.

That changed in Firefox 15 and is now a hidden preference; the default is for Tabs on Top to be on. To turn Tabs on Top off, you must use about:config. The instructions are the last item on the following page. I have also included a link on how to use about:config
*http://www.addictivetips.com/web/firefox-15-new-features-changes/
*http://kb.mozillazine.org/About:config

Exception occurs when get Members

All,
Please help. Im getting error "Exception occurs when get Members" when opening Dimension.
How to resolve this?
Thanks in advance

Hello Agus,
Kindly go to Tcode SE38 and Run program UJA_REFRESH_DIM_CACHE, then select your dimension and execute it.
Hope this helps
Regards
Bhagyesh Ravange

I downloaded Newest mozilla yesterday, adobe updated, and now when I click a YouTube video I get a box saying "Firefox doesn't know how to open this address, because the protocol (rtsp) isn't associated with any program." and can't watch any videos?

I downloaded the latest version of Mozilla Firefox yesterday, full and complete, and I am actually using it right now. The only problem I have had is upon clicking any YouTube video, the box pops up saying "Firefox doesn't know how to open this address, because the protocol (rtsp) isn't associated with any program." But there are no directions or suggestions on how to address this problem. Ive looked at YouTube add-ons and none of them really seem related. Upon the finish of the new Mozilla, I also was prompted to upgrade the flash player, and did so without any trouble. I am only guessing this is an extension/plug-in problem. I really am quite confused!

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"

The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.

The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.
We get this error when we try to check the properties of an analysis server using SQL Server Management studio(right click the instance name
and check properties). We have resolved this issue twice by Stopping the SQL Server analysis service,removing db folders from Analysis Server Data folder and starting the services back on. The db folder that we removed was advised by the BI team.
The SQL Server Analysis Server is 2012 SP1

Hi RB_ORIPW,
The table with name of 'XXX' doesn't exist.
An error occurred when loading the model(Micorsoft.AnalysisServices)
If I understanding correctly, you encounter the error randomly, now what you want it that avoid this issue completely, other than stop the services, detele the db filder and restart the services, right?
The error might be caused by that the data file is corrupted. However, we cannot give you the exact reason that cause this issue. You can troubleshoot this issue by using the Windows Event logs and msmdsrv.log.
You can access Windows Event logs via "Administrative Tools" --> "Event Viewer". SSAS error messages will appear in the application log.
The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
Data collection for troubleshooting Analysis Services issues
Besides, here is fix that describe the similar issue, and it was fixed in Cumulative Update 7 for SQL Server 2012 SP1, please refer to the link below to see the details.
http://support.microsoft.com/kb/2897263/en-us
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

I have restored my ipod many times, yet I still can't back it up because the "session has failed" and error 54. Does anybody know how to fix this?

[Windows user] I have an ipod touch 5th generation 64gb and I can't backup my ipod. I have restored it many times, even in recovery mode, but it still comes up with "iTunes can't backup this ipod because the session has failed," yet it was still plugged in. Also error 54 pops up too. Does anybody know how to fix this?

If a PC try:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

How to deactivate withholding tax base amount field

Dear Experts,
My in client is using the extended withholding tax with setting Define Formulas for calculating withholding tax, my client feel that the tax base amount field is open and user may accidentally input the wrong amount there thus can anyone tell me how to deactivate this tax base amount field?
thank you

Dear,
Go into Withholding tax type under SPRO>Financial Accounting Global Settings>Withholding Tax>Extended Withholding Tax>Calculation>Withholding Tax Type.
While maintaining the Withholding Tax type you have selected "W/tax base manual" under the control data. Just don't select that option then your requirement will be met.
There are other options also like Manual W/tax amt. which you might want to go for.
Regards,
Chintan Joshi.

How to deactivate configuration of product in Opportunity

Hi,
We are using configurable product in our project, the client wants to configure the product at Quotation only, But whent he Product is selected in Opportunity the sysytem throws an error Configure the product.
Can any one suggest how to deactivate this error.
With Regards
Selvam T

Hi Vanessa Donegan,
Thks for your Reply.
We need pricing in Opportunity Document. We created a condition record to pick base price. Any Other solution other than deactivating the price.
With Regards,
Selvam T

POP UP Occurs when i cancel ESS... how to deactivate this?

Similar Messages

Maybe you are looking for