Pop-up screen gibberish

When I am trying to make changes to my hard disk, like installing a new program or attempting to change security settings, the screen that pops up and asks you to enter your computer password comes up, but all of the text is in gibberish.  This just started last night, I have no idea why.  Any ideas how to fix it and/or prevent it from happening again?

Back up all data before proceeding.
Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and this support article for instructions. If Font Book finds any issues, resolve them.
Start up in safe mode to rebuild the font caches. Restart as usual and test.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode. In that case, ask for instructions.
If you still have problems, then from the Font Book menu bar, select
          File ▹ Restore Standard Fonts...
You'll be prompted to confirm, and then to enter your administrator login password.
Also note that if you deactivate or remove any built-in fonts, for instance by using a third-party font manager, the system may become unstable.

Similar Messages

  • If I click on an e-mail address link in a web page instead of a blank message opening I always get a pop up screen with a log-in for googlemail. I do not have and do not want a googlemail account. I just want to be able to send e-mails using Outlook.

    If I click on an e-mail address link in a web page instead of a blank message opening I always get a pop up screen with a log-in for googlemail. I do not have and do not want a googlemail account. I just want to be able to send e-mails using Outlook.

    OUtlook was already set as the mail client for FF, and is my operating system (XP)'s default mail programme. therefore problem not solved at all. what I get whenever I follow a link in a webpage to send an e-mail is a little pop up window asking me to sign in to gmail or open an account. any other suggestions?

  • Pop-up screen not showing while accessing transactions in SAP CRM WEB-UI

    When we are logging on SAP CRM WEB UI, for transactions like Lead, Complaints and Activities-
    Sometimes Pop up screen is showing for selecting transaction types, but sometimes it is not showing.
    We have tried it on different work stations with same user id and standard business roles , but we are not able to trace the problem. Also with same id sometimes error shows, "No business roles attached, not allowed to logon,
    after that when we tried on other workstation with same id we were able to access all transactions.
    Please suggest what would be the problem. 
    Rishikesh

    This is sporadically occurring issue hence I cannot pin point one single reason. Since sometimes you are able to logon and some time not certainly it could not be a Role authorization issue.
    Just check if your business role is properly configured. Thats all i can say.
    Regards
    Kavindra

  • How to generage pop up screen on selection screen of report program?

    Hi Guys,
            I am having a requirement to generate the <b>pop up screen on the selection screen</b> of the report program.
           Suggest me the best one with model program

    Hi Chakradhar,
                             Refer this code :
    SELECTION-SCREEN BEGIN OF BLOCK BL2 WITH FRAME TITLE TEXT-456.
    PARAMETERS PO RADIOBUTTON GROUP RADI USER-COMMAND R.
    SELECTION-SCREEN END OF BLOCK BL2.
    AT SELECTION-SCREEN OUTPUT.
    CALL SCREEN 100.
    when user will click on this radio button , a pop up screen will appear dynamically.
    Reward points if helpful.
    Regards,
    Hemant

  • What do I get "phishing" pop-up screens on a brand new install of Firefox?

    Something has infected my Firefox and I can't get rid of it. About a week or so ago, I started getting pop-up ads every time I go to a link in Firefox. I looked on the help blog and it said to do a "Restore to original settings". That didn't do any good. I still got the popups.
    So I removed Firefox completely from my computer and rebooted it. I just reinstalled Firefox and almost instantly, on the very first link I got a pop-up screen telling me that I need to do a "Windows Player Update. - Recommended Player Update - Important!" and it wants me to click on an install button. It looks like some phishing site to me.
    It won't be so bad, except it happens all the time. Since it's a pop-up, half the time, I can't see my screen.
    This is only happening on Firefox. IE is unaffected.

    Hello,
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!
    Thank you.

  • The green button, top left corner of a pop-up screen on MACbook, it's supposed to enlarge the pop-up to full MAC screen size, correct?  Mine does not.  Sometimes it makes the pop-up screen SMALLER.  Appreciate someone solving this for me.

    the green button, top left corner of a pop-up screen on MACbook, it's supposed to enlarge the pop-up to full MAC screen size, correct?  Mine does not.  Sometimes it makes the pop-up screen SMALLER.  Appreciate someone solving this for me.

    Are you talking about the green '+' button in the top left corner? That technically doesn't enlarge it. It switches the window from the default window size to the custom size you made. You can enlarge the window by moving your mouse to the bottom right corner of the window, and dragging until you get the size you want.
              MacBook

  • Pop up screen not coming for import PO at the time of MIGO

    Hi,
    I am doing Migo for import PO and not getting Pop-up screen to put commercial IV no., while MIRO is done for custom duties, Pls help me out and tell me the settings related to the same.

    Hi,
    Follows as below in case of Import procurement.
    Step 1)
    Maintain J1ID check with following details
    1. Material Chapter id Combination & Material Type as well.
    2. Maintain Cenvat determination Input & Out put Material.
    3. Vendor Excise Details - Excise indicator for vendor 1
    4. Plant - Excise indicator for Plant 1
    Step 2) Create PO.
    Maintain all the condition manually in PO
    Such as Custom duty 10%, Edu cess on Custom 2%, SHE cess on Custom 1%, BED equivalent to CVD 10%,  Edu cess on CVD 2% and SHE cesson on CVD 1%, AED 4%.
    Then in PO assign local vendor for these condition
    Step 3) Do MIRO and select planned delivery cost in the selection on MIRO screen & Post the MIRO/ Custom invoice.
    Step 4)
    Capture Excise invoice with reference to custom / commercial invoice system automatically pops up the window to enter the commercial invoice.
    Step 5)
    Perform GR during GR system Pops up the window to enter the commercial invoice. There you can enter thsame.
    Rg

  • Pop up screen for stock overview in ME51n through user-exit/BADI

    Hi,
    User wants that at time of  Purchase Requisition creation for any material system should give a pop up window of stock details to provide the status on inventory. 
    For stock summary the t code u201CMMBEu201D for combination of plant and material should run in background and produce output in pop up window. Basically MMBE report output is required for each item line in a pop up window.
    Can this be done through user-exit. I have implemented many user-exits but not sure about the report output in a pop up screen through a user-exit.
    The material stock ia already available under menu enviornment - Material stock(MMBE) but user wants the stock as soon as the material is enetered.
    any inputs.

    Have a look at below link which gives the details abt the user exits related to VA01/VA02.
    http://help.sap.com/saphelp_46c/helpdata/en/1c/f62c7dd435d1118b3f0060b03ca329/content.htm
    Best Regards,
    Vibha
    *Please mark all the helpful answers

  • Detailed pop up screen in selection screen - urgent

    hai experts,
    how can we give a detailed pop up screen in selection screen.
    My requirement is,
    To display Details of spool Nos taken for current porogram to take print out from end user.
    from OWN SPOOL REQUEST displays all other programs........
    can any one give a right solution?
    reward will avail for use full answer.
    thanks in advance.
    regards,
    jai.m

    Hi Jai
    May be you can use this FM POPUP_WITH_TABLE_DISPLAY_OK with the list of spool number populated into internal table.
    If you are particulary looking for selection screen, then decalre your selection screen as below
    Selection-screen begin of screen 9000.
    Selection-screen end of screen.
    Then use the statement Call selection-screen 9000 starting at x y.
    Hope this helps !
    Regards
    Ranganath

  • How to close a POP UP SCREEN

    Hi,
    Im calling a pop up screen (which contains and editable alv grid) when pressing a button on a status of a OO alv grid. Then, i write something on this alv grid from pop up screen and finally, when i want to close the window, i clic on the x thats on the right upper corner of the screen.
    When i do this, the program goes to the 'Module User command Input', where ive witten the sentences 'leave to screen 100 (first screen)', 'exit', 'leave screen', 'leave program'. Then it goes back to the 'Module status Output' (I dont know why it goes there) And finally nothing happens. The pop up window just wont close.
    I really need so serious help with this.
    Cheers,
    Roberto.

    Hi,
    have you tried the following two commands?
    SET SCREEN 0.
    LEAVE SCREEN.
    Cheers

  • Aperture 3 shuts down every time I try to use it after only using it for one minute. Aperture closes then a pop up screen asks if I want to reopen Aperture. If somrone at Aperture didn't keep pushing a stop button for it to close,it wouldn't need to ask t

    Aperture 3 shuts down every time I try to use it after only using it for one minute. Aperture closes then a pop up screen asks if I want to reopen Aperture. If somrone at Aperture didn't keep pushing a stop button for it to close,Apple wouldn't need to ask the stupid question"Do you want to reopen Aperture?" to begin with. Anyone out there having the same annoying problem?? I like Aperture or used to anyway,but if this nonsense continues, I will be forced to buy some other editor besides "No hanging fruit - Adobe photoshop CS5" or "I don't like you so I'm shutting down - Aperture".

    Hello,
    sorry to hear about your troubles, but we will need to have more technical information about your problem to be able to help you:
    There may be several reasons that can cause Aperture to crash on start up:
    You may have imported an image (or video) in an encoding that Aperture does not support, or that is larger than 2 GB, or that is corrupted and Aperture cannot process it
    Your Aperture Library or Preferences may have been corrupted
    Or you are having a system wide problem with your machine.
    Or you may simple be running out of disk space.
    It would help, if you could post the crash log from your last crash. Also, more details on your Aperture Library: Is it managed or references? how large is it? Is it on your system drive or on an external drive?
    What have you done, shortly before the trouble started? Have you imported new images or videos? Did you install any plug-ins or any new software, lile Final Cut?
    Try, if you can get Aperture to launch, if you defer the generation of Previews: Hold down the SHIFT-key immediately after you start Aperture to prevent preview generation for that session. If a damaged image in your library is preventing normal opening, this may allow you to start Aperture. If this succeeds, try to identify the broken image or video among the images you recently imported and remove it from the library.
    Regards
    Léonie
    Don't you think your user name is a little bit tactless in an Apple provided forum?

  • Update Z table from Custom pop up screen

    Hi All,
    I need to enhance  CC01 transaction.
    CC01 is used to create Change Numbers.
    My requirement is when Profile(Input field in CC01) is entered into initial screen of CC01 and enter key is hit, a custom pop up screen should be raised. This pop up screen will have 10 input fields from Z table. So when the user enters values in the input fields of pop up screen, I need to capture these values. When processing of CC01 is complete and saved system generates a Change Number, then I need to update the Z table with the values from custom pop up screen to the corresponding Change Number (Generated after Save)in Z table
    I have found the customer enhancement for raising Pop up screen pccd0005 (EXIT_SAPMC29C_006).
    My problem is how to link the pop up screen values with the Change number and update the Z table.
    Change Number is generated after CC01 Save.
    Can any one help me how to achieve this functionality?
    Thanks in advance
    Bhasker

    <u>Syntax:</u>
    EXPORT param_1 TO MEMORY ID 'EXIT_PCCD'.
    IMPORT param_1 FROM MEMORY ID 'EXIT_PCCD'.
    FREE MEMORY ID 'EXIT_PCCD'.
    Please look into the F1-help on Export/Import statements for more details.
    Message was edited by: Sam

  • Need to avoid pop-up screen while printing shop paper

    hi all ,
    we have develop a z program to print shop paper for selected orders based on selection criteria. Once the output displayed (out put contain shop paper , printer,order no and operation no )for selection criteria user will select one or many records from output and click on print button. Once user select the print button the spool request has to be created,
    problem :- when we select the print button in output display we are getting print pop-up screen
    OutputDevice      
    Frontend printer HP
    Copies           1
    Page selection                     
    Name           
    Title          
    Authorization    
    Spool retention pe
    Archiving mode   
       Thanks in advance
    jayasankar

    hi all ,
    we have develop a z program to print shop paper for selected orders based on selection criteria. Once the output displayed (out put contain shop paper , printer,order no and operation no )for selection criteria user will select one or many records from output and click on print button. Once user select the print button the spool request has to be created,
    problem :- when we select the print button in output display we are getting print pop-up screen
    OutputDevice      
    Frontend printer HP
    Copies           1
    Page selection                     
    Name           
    Title          
    Authorization    
    Spool retention pe
    Archiving mode   
       Thanks in advance
    jayasankar

  • Is it possible to create a pop up screen with alv tree within it?

    I was wondering whether it is possible to create a pop up screen where an ALV tree is within the pop up screen and the user may select a record from it..
    is there a function module for such function?

    you may use class cl_gui_alv_tree and display it in a popup screen. Look at RSDEMO_DIALOGBOX_CONTROL program (popup + cl_gui_picture control), and you combine it with BCALV_TREE_04 (cl_gui_alv_tree) to replace cl_gui_picture. You may access all demos from menu SE38, Environment, Examples (and finally Controls Examples in your case)

  • How to handle the pop-up Screen in LSMW - Recording

    Hi,
       I am doing the LSMW-Recording for Pricing Conditions.there are so many condition types are there.
    my problem is while uploading the data from flat file,if record alredy exists in SAP system, it will display one Pop up screen,  says "the record already exists do you want to overlap it".so that time it has to hit enter and has to overlap the existing records.
    can any one please help me..this is very urget to me.
    Points will be awarded for correct response.
    Thanks,
    Shobha

    Hi,
    Go to Maintain Field Mapping and Conversion Rules
    Insert coding at __BEGIN_OF_PROCESSING.
    Like:
    Select .....
    if sy-subrc = 0. "Record found
      skip_record.
    endif.

Maybe you are looking for