Pop up text and/or image window

Hi
I just want to get a pop up iweb window constrained in size within the current page after clicking a link. This is probably simple but I can't work it out.
Thanks

Here is an example of the method that Alancito mentioned: Opening Item in a New, Precisely Sized Window.
OT
Message was edited by: Old Toad

Similar Messages

Text and solid images print as halftones

I have a Xerox phaser 3250 with PCL6 emulation. Recently, whenever I create a document in Quark and print it, my text and solid images print as halftones as opposed to solid blacks. When I try to modify the PPD or any other device option in the print window, the option buttons are dimmed. Is this an issue with my printer or my OS or my software ? thanks

That makes two of us.
Bob

I´ve made four Columns with text and an Image over the middle of two columns. How do I put a text u

I´ve made four Columns with text and an Image over the middle of two columns. How do I put a text under the Image that spans over the Columns?

Did you mean that?
or
Did you mean that?
Let me know.

Report RDLC print deployment influenced by "Make text and others items window larger or smaller" is that behaviors right?

I have my PC at the window "Make text and others items window larger or smaller" set at the 150%.
How great was my surprise when I found that this setting of my PC broke my RDLC report print deployment.
Do you now about this mistakes?
Is that behavior of "Windows 8" right?
Or is that behavior of "vs 2013" right?

Hello,
Since this issue is mainly related to visual studio report, I am moving this thread to
Other Forums > Visual Studio Report Controls
forum to get help.
And IMO I would agree with you that it should be the right behavior, since it could affect the other printing tasks.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Text and some images together in a scrolling effect

Hi.
All the tutorials I find about scrolling effects are just with simple text. And all the tutorials about images don't say anything about applying it together with text.
I have a rather simple scrolling credits at the end of my video and wanted to have three or four logos at the end. (I'd do anything for the sponsors hehe).
The only way I could find to do this is to have two different scrolling effects to each individual image and another one for the text and move them back and forth until they fit. Even harder is to make them scroll at the same speed. Right now I've got one logo at the right speed, making them all do that will take hours.
Does anyone know an easier way? How can I add the images into the text?

Do you have Photoshop?
Start with one of the video presets in PS that has the same pixel dimesions as your video footage.
Make sure it is transparent.
Add a New Layer and color it black with Shift F5 - this is only temporary to help you see the text while you compose it.
Add a new text layer. Type your titles. When you need more space extend the lower part of the PS canvas: Image > Canvas Size. Repeat this as often as you need.
Paste your logos.
When you are done, go to the black layer and delete it.
Go to Layers > Merge Visible.
Save as a TIFF with the Preserve Transparency option checked on.
Import into FCP (or FCE), make it as long as you need and superimpose on your background.
Double click to place in the Viewer and set the scale to 100%.
Use the position contols to move your titles up the screen. Render.

Illegible text and blurred images

Hopefully there is a simple answer to this because I am having trouble finding it!
I created a presentation in Keynote and all looked good. Decided to send it to iDVD so that I could burn it onto DVD for distribution to clients. When opened in iDVD, both in preview and once burnt to disc, the text becomes illegible and the images blurred. I looked at the .mov file in Quicktime and the presentation looked fine there too. It is only once it gets into iDVD that it deteriorates.
Can anyone help please? As usual there is nothing in the Apple Help files to assist!
Would greatly appreciate any help you guys can give.
Cheers....Scotty

Try this one in the iDVD forum....
http://discussions.apple.com/category.jspa?categoryID=128

How do I ad pop up text to an image in the lightbox widget after it has been selected?

Hi there,
My client, a photographer, wants to ad text to some of the images in his gallery on the website I have built him in Adobe Muse, but he wants people to click/hover over an "info button" before they get to see the text as he likes the idea of user interaction. Think is I can't seem to place the tool tip widget inside the lightbox of my image. Do any of you have a way of doing this? My knowledge of coding is very limited and I've tried researching other ideas but have come out dry.
I posted this question a while back but didn't get any responses, and I am getting quite frustrated with this as it is the only thing keeping me from completing a job, as my client insists on having this functionality!
Please Help

Try to use "Lightbox Display" in "Widget Library->Compositions". "Widget Library->Slideshows" can only contain images.
- Abhishek Maurya

Dynamic Text and Resizing Images Inside

Hello.
FYI: I'm following the Flash Blogger tutorials listed on
http://www.indextwo.net with
Flash 8.
I've noticed that everything works wonderfully as far as
bringing the blog content into the dynamic text field; however, my
only problem at the moment is while Blogger will automatically
resize my images, so it doesn't mess up the current template in
html, but of course, Flash does not (out of the box).
I need a way to define the width & height of the images in
the text field to fit inside the dynamic text field they're in.
As far as I can tell, the tutorials listed on that site use an
alternate method and don't actually resize them. They just make a
link to them.
Lastly, I thought about using CSS in Flash to adjust the img
size, but from what I gather there are very few items at my
disposal.
Does anyone have a solution?
Thank you.

Hello.
FYI: I'm following the Flash Blogger tutorials listed on
http://www.indextwo.net with
Flash 8.
I've noticed that everything works wonderfully as far as
bringing the blog content into the dynamic text field; however, my
only problem at the moment is while Blogger will automatically
resize my images, so it doesn't mess up the current template in
html, but of course, Flash does not (out of the box).
I need a way to define the width & height of the images in
the text field to fit inside the dynamic text field they're in.
As far as I can tell, the tutorials listed on that site use an
alternate method and don't actually resize them. They just make a
link to them.
Lastly, I thought about using CSS in Flash to adjust the img
size, but from what I gather there are very few items at my
disposal.
Does anyone have a solution?
Thank you.

HT2521 A pop up window in my safari is not closing. Even after several clicks on OK it keeps popping up. And the open window is not allowing me to use the Safari nor is it allowing to restart/Shutdown the Mac. Please help me rectify this error.

A pop up window on my Safari does not close even after several clicks on OK... this window keeps popping up and is not allowing using the safari nor is it alowing to close the browser. The open Safari is also not allowing to restart or shutdown the notebook. Please help me rectify the problem.

Force Quit .
Press command + option + esc keys together at the same time. Wait.
When Force Quit window appears, select Safari, if not already.
Press Force Quit button at the bottom of the window. Wait.
Application will quit.
If this does not help, press the power button for 7 or more seconds.
Computer will shut down.
Restart.
Hold the shift key down and launch Safari.
Best.

Flash CS3 seams sluggish with text and if actionscript window open

I have a movie clip on the stage that has a large text box
inside with 18-20pt font, 3-4 paragraphs of text. When I try to
scrub the timeline, the playhead on the timeline does not keep up
with my mouse... it lags way behind. It's like the Flash CS3
software starts to freeze or hang. And the text in the final swf
movie doesn't animate on the timeline.
What I did finally discover is that if I hide (turn off
visiblity) the layer on the timeline that has the text movie clip,
voila! I can now smoothly scrub the timeline. What gives??? I think
others have had similar issues with the CS3 actionscript panel.
My pc specs are as follows... (I think it should be beefy
enough to handle this simple text animation).
Vista Ultimate SP1 64-bit, Intel Quad Core, 8G Ram, 512MB
eVGA 9800GTX graphics card

You have to switch the focus back to the application and then
to the test window. Evidently between Flash MX04 (the one I have to
test) and CS3, they made it so that just clicking in the AS editor
window doesn't return the focus to the application. In that case
the Testing Environment intercepts the apple-enter and just
re-tests the already compiled version.
If you click the application window, then click the
actionscript window, it will recompile the swf. However I
personally don't find apple-w to close the window so
onerous.

Text and two images in accordion header?????

how to insert two images in the accordion header
1) indicates the accordion image constant
2) if the accordion's state is up or down.
i tried using headerStyleName,
<mx:Accordion     headerStyleName="customAccordionHeadStyles">
            <mx:headerRenderer>
                       <fx:Component>
                             <mx:Button fontWeight="normal"
                               disabledColor="#000000"
                               labelPlacement="left"
                               textAlign="left"
                               />
                       </fx:Component>
            </mx:headerRenderer>
             <mx:VBox label="Some text here    " paddingTop="0"
                     backgroundColor="#ebfaff" icon="@Embed('assets/goodIcon.png')"
                    // one more icon or skin state here to show it was up or down
                     verticalScrollPolicy="off"
                     horizontalScrollPolicy="off"
                    / >
             <mx:VBox label="Some text here    " paddingTop="0"
                      backgroundColor="#ebfaff" icon="@Embed('assets/badIcon.png')"
                     // one more icon or skin state here to show it was up or down
                      verticalScrollPolicy="off"
                      horizontalScrollPolicy="off"
                      />
</mx:Accordion>
thanks for reading.

You can use "CanvasButtonAccordionHeader" to make custom Accordion header (HeaderRenderer) and add text/images as per your requirements.
    <mx:headerRenderer>
        <fx:Component>
            <components:HeaderRenderer />
        </fx:Component>
    </mx:headerRenderer>
One needs to add "flexlib.swc" to access "CanvasButtonAccordionHeader".
Hope this helps!
--Tanu

UNreadable text and missing images in sync'd pdf documents in iBooks

Hi,
i was quite excited when i heard that iBooks 1.1 was going to be able to open pdf documents, so following an update to 1.1, i loaded up a number of pdfs onto the iPad, the majority worked perfectly, however i noticed that a couple, (when opened), all the embedded images were missing and in another document the text was unreadable, sort of looked like the text was overlapping with each other.
Can anyone shed some light on this?

All kinds of things can go wrong when reading pdfs, which can be made in variety of different ways. If the problem pdfs display fine in OS X Preview and Adobe Reader, best to let Apple know about need to fix iBooks reader via
http://www.apple.com/feedback/ipad.html

Pop-up menus and Flash image

My development page has two things on it that are conflicting
with one another. I have a flash movie, and a pop-up menu. I would
like the menu to pop over top of the flash object, but quickly
learned that certain objects naturally float up to the top -
Thread
- But, the fix on this thread won't work for what I'm trying to do.
Is there any other way to get my menu pop over the movie? I
noticed the adobe main page has its menus overtop the flash movie,
so it must be possible, somehow. . . right?
Here's my
Test Page if it
helps to see what's going on. The pop-up in question is located at
"What We Do" -> "Programs"

The key is a special Flash parameter called WMODE, short for
Window Mode.
You'll need to add this parameter to your movie, set to
transparent. The
fastest way in Dreamweaver is to select your Flash movie and,
from the
Property inspector choose Parameters. In the dialog box that
opens, add
wmode in the Parameter column and transparent under Value.
That should do
the trick!
Best - Joe
"Ally86" <[email protected]> wrote in
message
news:e3t0nt$qf0$[email protected]..
> My development page has two things on it that are
conflicting with one
> another.
> I have a flash movie, and a pop-up menu. I would like
the menu to pop
> over
> top of the flash object, but quickly learned that
certain objects
> naturally
> float up to the top
> -
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=189&threadid
> =1092628&highlight_key=y&keyword1=behind - But,
the fix on this thread
> won't
> work for what I'm trying to do.
>
> Is there any other way to get my menu pop over the
movie? I noticed the
> adobe
> main page has its menus overtop the flash movie, so it
must be possible,
> somehow. . . right?
>
> Here's my
http://www.waystationinc.org/test.htm
if it helps to see what's
> going on. The pop-up in question is located at "What We
Do" ->
> "Programs"
>

IPhoto 9.6 - slideshow to movie - text slides show only text and no image

Made slideshow in iPhoto 9.6. Runs fine in slideshow mode on my iMac. However, when I export it to my desktop as a movie, slides that I inserted text via the text slide feature (bottom right of iPhoto) - black with the text only - lost the image. This happens on most of the text slides. followed similar procedure before w/ no issues.

Made slideshow in iPhoto 9.6. Runs fine in slideshow mode on my iMac. However, when I export it to my desktop as a movie, slides that I inserted text via the text slide feature (bottom right of iPhoto) - black with the text only - lost the image. This happens on most of the text slides. followed similar procedure before w/ no issues.

Send webpage, send text, and send image on the webpage I am currently browsing

Can you please explain how I can send a webpage I am browsing by email? Is there an icon or add on feature on Mozilla that I can use?
Thank you.

First, please update Firefox to 16.0.2. [[Update Firefox to the latest version]]. Then try an addon such as [https://addons.mozilla.org/en-US/firefox/addon/email-this https://addons.mozilla.org/en-US/firefox/addon/email-this]

Pop up text and/or image window

Similar Messages

Maybe you are looking for