Pop-up with conditions
HI again everyone!
Is it posible when in a numeric field(9 digits allaw) the first entered numbers are 202 a pop-up warning to come up(Please copy to...).
Thanks
If you want the popup to display only once, then place the below code in the exit event of the NumericField.
var
strNewtext = NumericField1.rawValue.toString();
if
(strNewtext.length>3){
if(strNewtext.substring(0,3)=="202") xfa.host.messageBox("This number is starting with 202");
Thanks
Srini
Similar Messages
-
Creative Cloud pops up with trail will expire in 0 days when I run Dreamweaver CS6
When I click on the icon for Dreamweaver CS6 a panel for Dreamweaver CC pops up with the message “Your trial will expire in 0 days” “00 days remaining. It offers “Buy Now” and “Continue Trial”. When I click the red x to close out I am returned to Dreamweaver CS6.
I reinstalled Dreamweaver CS6 but the problem persists. I do not want Dreamweaver CDC.
I tried to follow the instructions In http://helpx.adobe.com/dreative-suite ... "Creative Cloud Help/Creative Cloud applications unexpectedly revert to trial mode | CS6, CC ..." but I lost the thread.
I am at a loss at to what to do now. Please help.Here are two additional items that may be helpful:
1. I reported that Under Step 3 “Check Your Host Files – Still Have Problems? Reset Host Files” I did not find entries that reference activate.adobe.com. On further checking I found the Notepad file. It contained the following information:
Additionally, comments (such as these) may be inserted on individual
lines or following the machine name denoted by a '#' symbol.
For example:
102.54.94.97 rhino.acme.com # source server
38.25.63.10 x.acme.com # x client host
localhost name resolution is handled within DNS itself.
127.0.0.1 localhost
::1 localhost
2. On Saturday, 23 August 2014 I received an e-mail from Adobe Creative Cloud [email protected] that said
Welcome. We’re glad you’ve joined us.
Thanks for joining Creative Cloud. We thought we’d send along a few ideas to help you get started.
* Get 30-day trials of all-new versions of creative desktop apps that make everyday tasks easier and faster while delivering new support for cutting-edge hardware and standards.
* Easily upload and share your files, or post your work to the Behance community of creative professionals to get feedback, find inspiration, and connect with new opportunities.
* Express your creativity on-the-go using our new and improved range of mobile apps.
Get started
Make something great,
The Creative Cloud Team
This is odd. What made them think I joined Creative Cloud? The Creative Cloud program is not installed on the computer and I have not downloaded Creative Cloud trial version or a paid version.
GOAL: My goal is to eliminate the CC pop up that occurs every time I access Dreamweaver CS6. I am satisfied with Dreamweaver CS6. I do not want to lose the CS6 capability. I do not want Creative Cloud trial version or the paid version.
So far I have been unable to remove the pop up and I can’t find a way to phone or e-mail Adobe Technical Support. When I received the CC Welcome message, I considered the following approach:
1. Accept the invitation to Get Started and install the 30-day trial version
2. Use the CC Cleaner Tool to uninstall Creative Cloud.
This approach might work. It is equally possible it would further complicate the problem.
Should I accept the CC invitation to Get Started with CC and then use CC Cleaner to uninstall the Creative Cloud program? Is there an alternative approach that will work?
Thank you.
Earl B. Stroup
<Removed by Moderator> -
SUM function with condition in RTF template
Hi All,
I have a problem in calculating the SUM in RTF template with condition,
Here is the XML
- <LIST_G_LINE_NOTES>
- <G_LINE_NOTES>
<LINE_TRX_ID>1567856</LINE_TRX_ID>
<LINE_ID />
- <LIST_G_TRX_LINE>
- <G_TRX_LINE>
<CF_ITEM_NO>SDCN1144B</CF_ITEM_NO>
</G_TRX_LINE>
</LIST_G_TRX_LINE>
- <LIST_G_LINE_EQUIVALENT_UNIT_PRICE>
- <G_LINE_EQUIVALENT_UNIT_PRICE>
<LINE_EQUIVALENT_UNIT_PRICE>-15.99</LINE_EQUIVALENT_UNIT_PRICE>
<LINE_EXCHANGE_EXTENDED_AMOUNT>-223.86</LINE_EXCHANGE_EXTENDED_AMOUNT>
<CUSTOMER_TRX_LINE_ID>1567856</CUSTOMER_TRX_LINE_ID>
</G_LINE_EQUIVALENT_UNIT_PRICE>
</LIST_G_LINE_EQUIVALENT_UNIT_PRICE>
- <LIST_G_TRX_LINE>
- <G_TRX_LINE>
<CF_ITEM_NO></CF_ITEM_NO>
</G_TRX_LINE>
</LIST_G_TRX_LINE>
I need the summation of field LINE_EXCHANGE_EXTENDED_AMOUNT with the condition CF_ITEM_NO!=''
can anybody help me with the solution.
Thanks in AdvanceKavipriya,
Here is the XML
<LIST_G_LINE_NOTES>
<G_LINE_NOTES>
<LINE_TRX_ID>1567856</LINE_TRX_ID>
<LINE_ID />
<LIST_G_TRX_LINE>
<G_TRX_LINE>
<LINE_DELIVERY_ID />
<DISCOUNT>0</DISCOUNT>
<CP_LN_TAX_AMT />
<CF_ITEM_NO>SDCN1144B</CF_ITEM_NO>
</G_TRX_LINE>
</LIST_G_TRX_LINE>
<LIST_G_LINE_EQUIVALENT_UNIT_PRICE>
<G_LINE_EQUIVALENT_UNIT_PRICE>
<LINE_EXCHANGE_EXTENDED_AMOUNT>-223.86</LINE_EXCHANGE_EXTENDED_AMOUNT>
</G_LINE_EQUIVALENT_UNIT_PRICE>
</LIST_G_LINE_EQUIVALENT_UNIT_PRICE>
</G_LINE_NOTES>
Edited by: user13012317 on Mar 10, 2011 11:00 PM -
My iphone 5 wont let me update apps keeps popping up with old apple id how do i fix this
my iphone 5 wont let me update apps keeps popping up with old apple id how do i fix this??
All apps downloaded/purchased are tied to the apple ID used to download/purchase them.
If you change your Apple ID and do not wish to use the old apple ID and password to update them, you have to delete them and redownload or buy them under the new apple ID. -
My computer popped up with an update from iTunes several days ago. I downloaded the update. When I went to open iTunes on my computer, it gives me the following error messages...
Missing MSVCR80.dll file.
Error 7 (Windows error 126)
I tried to download iTunes again from the website and repair the problem, to no avail. I've tried several times, but cannot get it to open. I have a Windows 7 machine. My iPhone 5 and iPad work fine and have not asked me to update. I've never had a problem with iTunes before. I hate to delete it entirely from my computer and start over. I'm afraid I'll lose all the music I have downloaded there. What do I do?Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
How to prevent duplication on a column with condition
Hello everyone,
I need some advice here. At work, we have an Oracle APEX app that allow user to add new records with the automatic increment decision number based on year and group name.
Says if they add the first record , group name AA, for year 2012, they get decision number AA 1 2013 as their displayed record casein the report page.
The second record of AA in 2013 will be AA 2 2013.
If they add about 20 records , it will be AA 20 2013.
The first record for 2014 will be AA 1 2014.
However, recently , we get a user complaint about two records from the same group name have the same decision number.
When I looked into the history table, and find that the time gap between 2 record is just about 0.1 seconds.
Besides, we have lookup table that allows admin user to update the Start Sequence number with the restraint that it has to be larger than the max number of the current group name of the current year.
This Start sequence number and group name is stored together in a table.
And in some other special case,user can add a duplicate decision number for related record. (this is a new function)
The current procedure logic to add new record on the application are
_Get max(decision_number) from record table with chosen Group Name and current year.
_insert into the record table the new entered record with decision number + 1
_ update sequence number to the just added decision number.
So rather than utitlising APEX built-in automatic table modification process, I write a procedure that combine all the three process.
I run some for loop to continuously execute this procedure, and it seems it can autotically generate new unique decision number with time gap about 0.1 second.
However, when I increase the number of entry to 200, and let two users run 100 each.
If the time gap is about 0.01 second, Duplicate decision numbers appear.
What can I do to prevent the duplication ?
I cannot just apply a unique constraint here even for all three columns with condition, as it can have duplicate value in some special condition. I don't know much about using lock and its impact.
This is the content of my procedure
create or replace
PROCEDURE add_new_case(
--ID just use the trigger
p_case_title IN varchar2,
p_year IN varchar2,
p_group_name IN VARCHAR2,
--decisionnumber here
p_case_file_number IN VARCHAR2,
--active
p_user IN VARCHAR2
AS
default_value NUMBER;
caseCount NUMBER;
seqNumber NUMBER;
previousDecisionNumber NUMBER;
BEGIN
--execute immediate q'[alter session set nls_date_format='dd/mm/yyyy']';
SELECT count(*)
INTO caseCount
FROM CASE_RECORD
WHERE GROUP_ABBR = p_group_name
AND to_number(to_char(create_date, 'yyyy')) = to_number(to_char(date_utils.get_current_date, 'yyyy'));
SELECT max(decision_number)
INTO previousDecisionNumber
FROM CASE_RECORD
WHERE GROUP_ABBR = p_group_name
AND to_number(to_char(create_date, 'yyyy')) = to_number(to_char(date_utils.get_current_date, 'yyyy'));
IF p_group_name IS NULL
THEN seqNumber := 0;
ELSE
SELECT seq_number INTO seqNumber FROM GROUP_LOOKUP WHERE ABBREVATION = p_group_name;
END IF;
IF caseCount > 0 THEN
default_value := greatest(seqNumber, previousdecisionnumber)+1;
ELSE
default_value := 1;
END IF;
INSERT INTO CASE_RECORD(case_title, decision_year, GROUP_ABBR, decision_number, case_file_number, active_yn, created_by, create_date)
VALUES(p_case_title, p_year, p_group_name, default_value, p_case_file_number, 'Y', p_user, sysdate );
--Need to update sequence here also
UPDATE GROUP_LOOKUP
SET SEQ_NUMBER = default_value
WHERE ABBREVATION = p_group_name;
COMMIT;
EXCEPTION
WHEN OTHERS THEN
logger.error(p_message_text => SQLERRM
,p_message_code => SQLCODE
,p_stack_trace => dbms_utility.format_error_backtrace
RAISE;
END;
Many thanks in advance,
AnnWhy not using a sequence for populating the decision_number column ?
Sequence values are guaranteed to be unique so there's no need to lock anything.
You'll inevitably have gaps and no different groups will have the same decision_number in common.
Having to deal with consecutive numbers fixations you can proceed as
with
case_record as
(select 2012 decision_year,'AA' group_abbr,1 decision_number from dual union all
select 2012,'BB',2 from dual union all
select 2012,'AA',21 from dual union all
select 2012,'AA',22 from dual union all
select 2012,'BB',25 from dual union all
select 2013,'CC',33 from dual union all
select 2013,'CC',34 from dual union all
select 2013,'CC',36 from dual union all
select 2013,'BB',37 from dual union all
select 2013,'AA',38 from dual union all
select 2013,'AA',39 from dual union all
select 2013,'BB',41 from dual union all
select 2013,'AA',42 from dual union all
select 2013,'AA',43 from dual union all
select 2013,'BB',45 from dual
select decision_year,
group_abbr,
row_number() over (partition by decision_year,group_abbr order by decision_number) decision_number,
decision_number sequence_number -- not shown (noone needs to know you're using a sequence)
from case_record
order by decision_year,group_abbr,decision_number
DECISION_YEAR
GROUP_ABBR
DECISION_NUMBER
SEQUENCE_NUMBER
2012
AA
1
1
2012
AA
2
21
2012
AA
3
22
2012
BB
1
2
2012
BB
2
25
2013
AA
1
38
2013
AA
2
39
2013
AA
3
42
2013
AA
4
43
2013
BB
1
37
2013
BB
2
41
2013
BB
3
45
2013
CC
1
33
2013
CC
2
34
2013
CC
3
36
for retrieval (assuming decision_year,group_abbr,decision_number as being the key):
select decision_year,group_abbr,decision_number -- the rest of columns
from (select decision_year,
group_abbr,
-- the rest of columns
row_number() over (partition by decision_year,group_abbr order by decision_number) decision_number
from case_record
where decision_year = :decision_year
and group_abbr = :group_abbr
where decision_number = :decision_number
DECISION_YEAR
GROUP_ABBR
DECISION_NUMBER
2013
AA
4
if that's acceptable
Regards
Etbin -
Hey,
My mac keeps redirecting me to pages like MacKeeper and stuff on safari.
Its also popping up with a ton of ads like you just one and i phone 5 and crap.
Also when i click somewhere on the page where I'm not supposed to click some times it
redirects me to a new page please help!!!!:/ If u give me any websites to use
please make sure there securer or u have used them before so i don't get anymore viruses!
P.S i only got my mac this year
Thanks if you can helpYou may have malware installed on the Mac. To remove it run this:
Adwaremedic: Removes all known adware from your Mac -
I installed elements 12, it won't open, a screen pops up with options for e-12 and 4 other languages. When I click Elements 12 a screen pops up with a red install icon, I click it and it askes for the serial number. It won't let me type in letters only numbers. I already did the serial number once. How do I get this to work? I don't want to be a programer!
attach a screenshot of what pops up after clicking pse 12, http://forums.adobe.com/thread/963429
-
I have Itunes set up to sync with my Ipod touch and Ipad. As of today, iTunes has started searching to sync with an iPhone, which I don't have and pops open with an error message stating it cannot locate the iPhone to sync. I have looked in devices and only the iPad and iPod Touch are listed. Any ideas on how to stop iTunes from searching for any iPhone it is never going to find? It is annoying to have it popping up all the time with the error message. Thanks in advance for any suggestions.
You should really read the manual.
"How do you restore from backup? "
Restore. When given the choice, choose to use backup.
"And how can I check to see if the pics and videos are on my computer somewhere first??"
They would only be where you put them. What program did you use to import them? Pics/vids taken with ipod are not part of the sync process at all. You should be importing them just as you would with any digital camera.
If you did not import them, then they are not on your computer. -
I was given an iPhone 4 from a friend and I was trying to reset it to factory settings but it won't let me. It's keeps popping up with a box to put in my friends iCloud account password in but I don't know it. How can i delete their iCloud account without knowing their password?
You cannot delete the iCloud account that is signed on to Find My iPhone unless you know the password. This is called the Activation Lock:
ACTIVATION LOCK
It is an anti-theft security measure that is a part of iOS 7. You can only get around this by following the steps in this support article:
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
Contact your friend. This is the only way around the lock.
Best of luck,
GB -
Is it possible to create a Column with Conditional Mandatory with another Column?
Is it possible to create a Column with Conditional Mandatory with another Column?
For example
In a Table we have column A, B, C.
A is Primary Column.
B is Optional
C is Conditional Mandatory.
A B
C
12345 ABC
OK
12346 NULL
NULL
12347 ABC
OK
Only if the B Column has the value then only C column should be mandatoryI guess you can't create a condtional mandatory column directly. However, you can use check constraint to on the column
create table YourTable
A int primary key,
B char(3),
C int,
constraint ch_con check(
B
is not null
or C is null -
iTunes 11.1.4, and iOS 7.0.4. - My iPhone 4 is popping up with "do you trust this computer?" Message, and will no longer sync to iTunes. My device when plugged in just won't sync, and I litteraly do not know what to do... Someone please help me!?
I did know that it was a new feature, but it made no difference, it wasn't synching. I did however find a post that completely helped me!! Link below.
https://discussions.apple.com/thread/5821850?start=0&tstart=0 -
iTunes crashes when doing a power search. I get a Microsoft Visual C Runtime Library Error message: Program C:\Program Files (x86)\iTunes\iTunes.exe R6025. Pure virtual functional call. If I select ok, Windows 7 pops up with iTunes has stopped working and then it shuts iTunes down. Anyone else every have this issue. Any ideas on a fix?
Thanks,For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Trying to install iTunes on my Laptop, running windows 7 (64-bit), but whenever I reach the end of the install, it pops up with an error telling me:
"Service 'Apple Mobile Device' (Apple Mobile Device) could not be installed. Verify that you have sufficient privileges to install system services"For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Scheduling Agreement With Condition Type Calc.
Hi All,
Can i have Scheduling Agreement With Condition Type Calc. as in PO Conditions as there are some calculation need to be made based on Excise.
Thanks in advance
SapuserHi,
Condition in scheduling agreeement are time dependent where as condition in purchase order time independent so it's not possible to use.
Regards
Ravi Shankar.
Maybe you are looking for
-
HELP ! my mac will not boot up
My G4 imac 512 mb 60 HD running tiger just up and died yesterday , it had been runing slowly for a wile but i chalked that up to me running heavy RAM items like photoshop,corel painter,flash , dreamweaver ..... but then in the morning i turned it on
-
List items not rendering on page
I have code that I'm querying a list and I am trying to get them into an accordion. I'm able to see the items when I do an alert to validate its connecting, however, the accordion and data items are not rendering. Am I missing something? <script type
-
TSV_TNEW_PAGE_ALLOC_FAILED when we click on any buisness role
Hi Team, We are using CRM 7.0 For one particular user,he is higher Management User so have lot of items to diplay. After login when he click on any buisness role, he get error: No more storage space available for extending an internal table. And we f
-
Always hided elements in structure (SAP BW query) are "activated" in WebI
Hello WebI-experts We have an interesting challenge to get resolved, hopefully you can help us. As datasource we use a SAP query with two structures. One structure contains a variable (variable 0CMONTH of character 0CALMONTH) which is only relevant f
-
Urgent- Mouse Event ..problem..
Hello I am developing a client server application. The client when receives some messages processes it,which is in a while Loop and this while loop is in a thread...these messages are recieved from the server. The client has a gui..on which I want to