Pop-Ups No Longer Work?

I have a portfolio page that I put together with Flash MX.
The interface is bsically a chart that has a bunch of buttons on
it. These buttons each have a code similar to this;
on (release) {
getURL("javascript:openNewWindow
('file.html','thewin','height=600,width=800,toolbar=no,scrollbar=no,resizable=no,menubar= no')");
This used to work - but not now.
Even when I check my browser for pop-up/javascript enabling,
it no longer works.
Does anyone know why? Or what the given workaround (with all
those linked pages) would be?

welc
me

Similar Messages

Pop-ups (custom animations) work in PPT presentation, but don't in published presenter PDF

Pop-ups (custom animations) work in PPT presentation, but don't in published presenter PDF. I created a file in PowerPoint 2003 that allows the user to click on words in a graphic and have definitions of the word pop-up. This only works in the PPT presentation, it does not work when I publish the file to PDF using Adobe Presenter, version 7.0.5, build 7588. Any suggestions?

MKO,
That's not entirely surprising. Unfortunately, what you're doing cannot be replicated or executed properly in Presenter content, because trigger functions are essentially Active X controls native to the PowerPoint environment. And that's the problem: Active X commands are totally ignored when your deck is converted during the publishing process.
So what to do?
You have 2 options, and neither are "clean" solutions because each represents a bit of homework.
Scenario 1: what you could do is create a series of hidden slides that are associated with / correspond to each of the text elements you have on the first slide. You'd have to assign hyperlinks to the text boxes and then point the hyperlinks to the associated hidden slide. The upside here is that if you have to edit any content after-the-fact, is that you can conduct such edits directly in PowerPoint. But there is a drawback too; namely, that if you have to keep track of slide views, hidden slides are not tracked at all by LMSs (including Adobe Connect), so you'd have to come up w/ a formula for counting the number of visible slides so your presentation will mark a "complete" on the LMS.
Scenario 2: create a Flash interaction that effectively does the exact same thing. The drawback to this I hope is obvious: if you have any content edits, then you're forced to edit the file directly in Flash. The good news here, however, is that this solution only requires one slide, so you can effectively keep track of slide views if that's something you need if the course is deployed on an LMS.
Again, perhaps not ideal, but the above does represent alternative solutions to what you attempted to do in your sample deck.
Rob
http://www.robrode.com/yabb/

Pop account no longer working

I have been downloading my gmail account to Mac Mail for 2 years now, but it is no longer working.
I've gone through gmail's help page and double checked all of my settings, no issue.
The error message I get:
There may be a problem with the mail server or network. Check the settings for account "Gmail" or try again.
The server error encountered was: The connection to the server "pop.gmail.com" on port 995 timed out.
Any ideas?
thanks
gannon
imac Mac OS X (10.4.6)

Well, it could be that the server is temporarily unavailable for some reason -- it works for me, though.
Go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list.
Also, try using a different method to connect to Internet, if possible, or connecting the computer to Internet as directly as possible, i.e. bypassing any routers that might be present, using an ethernet cable instead of wireless, etc., and see whether that makes a difference.

Glossary tab doesn't display and Glossary pop ups don't work

TCS 3.5 (FrameMaker 10, RoboHelp HTML, version 9)
Windows XP version 5.1 sp3
Internet Explorer 8.0
My apologizes if this should be in a different forum. Also, from searching I have found that the problem is usually that the DLL has not been loaded -- I have done that. So I am at a loss. Thanks in advance for your help!
Problem: My .chm output does not have a Glossary tab and the Glossary text pop-ups in my topics do not work.
Background: Since I am new to TCS 3.5 I'm going to give my entire process. Quite frankly I'm not even sure if my entire process is correct.
Steps:
Before I began: I loaded the HHActiveX.dll. Here's the proof:
Create a blank project.
Import master page (File > Import > Master Page).
Load project settings (File > Project Settings > Import).
Link FrameMaker Book (File > Link > FrameMaker Document)
Configure Properties (Right-click the book file in RH and click Properties).
In Properties, select Convert FrameMaker Table of Contents and give a name.
In Properties, select Convert Glossary and give a name.
In Project Manager pod, right-click the Glossary topic (System Management GLO) and click Set as Default.
Update Project (File > Update > Update All).
Run Glossary Hotspot Wizard (when running wizard, select the glossary topic that was set as default in step 8)
Edit the UpdateMarkedGlossaryTerms.jsx script (change the GlossaryName variable to the Glossary topic created in step 8 and change the GlossaryStyle variable to TextPopUp)
Run Update Marked Glossary Terms script (In Script Explorer pod, right-click the UpdateMarkedGlossaryTerms.jsx script and click Run).
Run graphicinreferencepages.jsx script (this inserts my note graphics from FM reference pages)
Configure Microsoft HTML Help layout. Here's the properties file:
16. In the properties file I selected the Glossary topic that I had set as my default in step 8.
17. Click Save and generate.
Result: In the .chm file (and in View Selected Item in RH) when I click a glossary term in a topic, I get "This program cannot display the webpage". Also, the Glossary tab is not displayed.

Welcome to our community, Linda
In RoboHelp, if you open the Glossary pod (View > Pods > Glossary > Select Glossary) do you see terms and definitions listed there?
If not, that would explain it as the Glossary has no entries.
Assuming it does have entries, you may simply need to enable the tab by clicking View > Pods > Project Set-up. Expanding the Windows section in the pod and double-clicking your CHM window.
A CHM window looks like this:
If you don't see a CHM window, you will need to create one. If you do see a CHM window, double-click it. Then ensure the Glossary is enabled.
Keep us posted! Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Table pop-ups don't work in iWork Pages, any ideas?

Pop ups in Numbers tables work when transferred to Pages on the Mac but don't appear to work in iWork pages On the iphone and iPad. I produce approximately 20 reports a week in Pages. Not sure if I'm missing something, or this feature just doesn't exist yet. Any help would be greatly appreciated.

Pop ups in Numbers tables work when transferred to Pages on the Mac but don't appear to work in iWork pages On the iphone and iPad. I produce approximately 20 reports a week in Pages. Not sure if I'm missing something, or this feature just doesn't exist yet. Any help would be greatly appreciated.

POP Accounts no longer working after 3.0 Update?

Before I upgraded to version 3.0 of the OS, I had two POP3 email addresses set up on it, they are still there but no longer work (download or send) nothing in the settings has changed from pre 3.0
Anyone else experienced this problem? Anyone got a solution?
My .Mac/MobileMe accounts are working as normal BTW....

Delete and re-install them.

One POP email no longer working in Imail

I have two POP email accounts that have been working quite well on my MacBook for several months. About a week ago one of them stopped receiving emails. I have deleted the account and set it up again to no avail. If I check the account information it lists all the emails on the server. PLEASE help me figure this out. I can open it on my browser and the mail is being delivered just fine there - just not on my imail account. The two email accounts that I have are set up the same and only one is receiving mail. Thank you for any help!

Attached is a link that gives the settings for my web-based email http://help.securepaynet.net/article/4715
All settings on both email address are set the same in my Mac Mail. One is working the other is not. I am also receiving emails for both accounts on my blackberry. This is an Apple problem as there are many others that have reported the same problem on Apple's Support page. I have deleted and re-entered this email and still nothing. There are email messages that are listed on the server but are not being delivered to my email account. Any suggestions are greatly appreciated.

Facebook Pop-Ups Don't Work?!?!

Hi All...
When I use Facebook and someone posts something new I get a little pop-up window in the upper right hand corner of my screen. The pop-up has two buttons... "Close" and "Show". The "Close" button works fine and closes the pop-up window. But the "Show" button does absolutely nothing. I click on it and "Show" and the pop-up just disappears just as if I clicked the "Close" button.
I could have swore before when I clicked on "Show" it would take my Safari browser to the location in Facebook to where the pop-up was referencing. But now it doesn't do anything.
Anyone else notice this? Is Apple releasing not fully tested software. There is a lot of things I just don't like about the recent releases... iTunes 11 is one of them. Maybe it's time to switch to a windows computer and save a TON of money in the process.
Any info is appreciated. Thanks!

Hi All...
When I use Facebook and someone posts something new I get a little pop-up window in the upper right hand corner of my screen. The pop-up has two buttons... "Close" and "Show". The "Close" button works fine and closes the pop-up window. But the "Show" button does absolutely nothing. I click on it and "Show" and the pop-up just disappears just as if I clicked the "Close" button.
I could have swore before when I clicked on "Show" it would take my Safari browser to the location in Facebook to where the pop-up was referencing. But now it doesn't do anything.
Anyone else notice this? Is Apple releasing not fully tested software. There is a lot of things I just don't like about the recent releases... iTunes 11 is one of them. Maybe it's time to switch to a windows computer and save a TON of money in the process.
Any info is appreciated. Thanks!

The spry pop-up menu I built in Adobe Dreamweaver worked fine in my old Firefox, I updated Firefox today and the menu no longer works--despite disabling the pop-up blocker in Firefox preferences...what's the problem??? I need the menu to work!!!

I built a new pop-up menu for my website using Spry in Adobe Dreamweaver. Because of some differences in .HTML and .XHTML
it took me days to get it right. I tested every variation in Firefox until it worked perfectly. Today, I installed the newest version of Firefox and now the pop-up no longer works. I changed the preferences in Firefox to disable to pop-up blocker and it STILL DOESN'T WORK...although an older style of pop-up menu (menu machine) which is no longer supported by Adobe, DOES WORK.
HELP!!! THIS IS IMPORTANT.

pixlor:
OP is using CS3 and the menu blog is talking about the menus
in earlier
versions of FW, so *most* of the points made in the blog
don't apply.
That's not to say that using CS3 pop-up menus is a *good*
thing....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"pixlor" <[email protected]> wrote in
message
news:gbce7b$a50$[email protected]..
>
quote:
Originally posted by:
captainbianco
> I agree completely and totally, and I will haha but I'd
like to get this
> one
> fixed if I can. You can view the page here
>
http://www.flooringanswers.com/nysurfaces/index2.htm
> Hover over the letters to see the pop-up menu's. The one
over "t" is the
> problem.
> Under Flooring, for example, you have a div with id of
> MMMenu0910163730_1_1
> (ugh). Under that are four items and they have their own
IDs:
> MMMenu0910163730_1_1_Item_0
> MMMenu0910163730_1_1_Item_1
> MMMenu0910163730_1_1_Item_2
> MMMenu0910163730_1_1_Item_3
> MMMenu0910163730_1_1_Item_4
>
> Your CSS file, however, doesn't have location
information for the ..Item_4
> object.
>
> That's just from a quick, cursory look. In order to fix
this, you're going
> to
> have to go through it line by line and debug it. By the
time you do this,
> you
> might be better off getting something else and starting
from scratch.
>
> Read this:
>
http://www.losingfight.com/blog/2006/08/11/the-sordid-tale-of-mm_menufw_menujs/
>

I'm having a problem getting my pop ups in CS6 InDesign to work when I export to Acrobat.

I am creating pop ups in a CS6 InDesign Interactive design and when I export the file to Acrobat the pop ups will not work.
They work on the 1st page onlybut not in any other page in the interactive piece.
I started this document in CS5 and then converted it to CS6 half way through the design. Can any one tell me why this is happening and what can I do to remedy the problem?

A- Image
B
C
D
I hope these will help you.

Microsoft Dynamics CRM 2013 Google Chrome not populating popups working correctly with pop ups.

If incorrect forum, just alert and move. I am having an issue with hosted Microsoft Dynamics 2013 and Google Chrome latest release, 31. This just started with the hosted version of Dynamics CRM 2013, Chrome had been working correctly with
our earlier version of CRM.
When users on latest version of Chrome, 31, login to Dynamics CRM 2013, everything looks fine. Issue is specifically, for sales folks, when they open a client record, and where the client info is located, there is a standard date and time and tiny
little calendar you can pull up if you click on it. When the user clicks on the tiny little calendar, they DO get a pop up, but the pop up is blank. And, there is no error message at all. Nothing freezes, nothing bad happens at all, except
for the salesperson, who live and die by their calendars and ability to schedule appointments and see exiting appointments.
This is not some in house coding issue. It is a generic CRM phone call record that has this issue.
Again, no errors, nothing crashes, but Dynamics CRM 2013 is useless to Google Chrome users in house because of this. Which, in a support position, is terrible. Users who got an upgrade, have their favorite interface rendered useless. And these
are sales folks. And, I did all settings according to what I was able to find for CRM 2010 and Chrome, for when pop ups do not work, and all settings were already correct for pop ups, website is in trusted sites, etc, which is what I expected, since
everything worked on CRM 2010.
Any clues or ideas? Thank You.
Rick

We don't know. Better to ask over here.
https://community.dynamics.com/crm/f/117.aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

How Do I STOP pop ups FROM enabled when I Have disabled them to pop up it happens when I am workin on an important document a real pain

I have i web based stock system and it requires pop ups I have enabled for the pop ups and things work fine the all of a sudden my pop ups are blocked and the only way to continue I have to reboot my computer

Hello fisherman66,
Firefox usually doesn't block pop-ups, especially if you allow them, but extensions and some security software can block pop-ups.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

No pop-ups with partner determination in Interaction Center Web UI

Hi,
We are working with SAP CRM 7.0 SP06 and have the following problem.
In Interaction Center Web UI, when we create a sales order, the partner determination is triggered. But no pop-ups are shown to choose the right business partner. When we use Web UI for different Role (not Interaction Center), then we will get pop-ups to choose.
So partner determination is alright, but pop-ups are not working for us in Interaction Center.
I know when using SAP GUI Interaction Center, you have to implement SAP Note 487734 for getting the pop-ups. But this note is not relevant for CRM 7.0 and Web UI.
Do you know what the problem is?
Regards,
Emile

Hi Naga,
In customizing go to:
Customer Relationship Management => Interaction Center WebClient => Business Transaction => Define Business Transaction Profiles
Then for your Business Transaction Profile go to 'Business Transaction Dialog Boxes' and mark the 'Allows Dialog Box' field.

Pop ups, please helppp

Hi, I've been using the actionscript that I see all over
forums, however when people view my site in either IE or Firefox,
the pop ups don't work! this is my site:
http://www.theliftband.com
here's the actionscript i use on every button that i want to
open a pop up window:
on (release) {
getURL ("javascript:NewWindow=window.open('LINKURL HERE','The
Lift','width=800,height=600,left=0,top=0,toolbar=Yes,location=Yes,scrollbars=Yes,status=N o,resizable=Yes,fullscreen=No');
NewWindow.focus();void(0);");
it doesnt seem to be working. anyhelp / better method would
be greatly appreciated. thanks so much

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Images and Pop-Ups Will Not Open in IE???

I have several .html pages being displayed within an i-Frame.
There are thumbnail images on .html pages that are being displayed
within the i-frames, and these thumbnails are not displaying in IE,
even though they do display in Firefox. The thumbails are linked
through JavaScript code (written by Dreamweaver 8) to open up .html
pages. Some of these thumbnails are displaying (even though some do
not and all use the same code), though the links to the pop-ups are
not working.
Everything works fine in FireFox, this is only a problem in
IE. I am using version 7 of IE.
Does anyone have ANY ideas why this may not be working????
Thanks for any assistance!!!!

IE7 has popup blocking turned on by default. You may need to
alter the
settings
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"jjhtwin2" <[email protected]> wrote in
message
news:ep8l97$5ea$[email protected]..
>I have several .html pages being displayed within an
i-Frame. There are
> thumbnail images on .html pages that are being displayed
within the
> i-frames,
> and these thumbnails are not displaying in IE, even
though they do display
> in
> Firefox. The thumbails are linked through JavaScript
code (written by
> Dreamweaver 8) to open up .html pages. Some of these
thumbnails are
> displaying
> (even though some do not and all use the same code),
though the links to
> the
> pop-ups are not working.
>
> Everything works fine in FireFox, this is only a problem
in IE. I am using
> version 7 of IE.
>
> Does anyone have ANY ideas why this may not be
working????
>
> Thanks for any assistance!!!!
>

Pop-Ups No Longer Work?

Similar Messages

Maybe you are looking for