Popping Noise in Game-Mode with X-Fi Platinum and Nforce 5 Mo

Hello!
After buying a Nforce5 Motherboard everything worked fine-except the thing that sometimes there is a popping noise in game mode (only game mode!!) till i reboot. I think i can li've with it but it is very annoying to restart the comp one time every day just to remove the popping noise from my ears.
I have the newest BIOS, drivers and looked if theres an IRQ conflict!
Thanks!Message Edited by wieland_mail2 on 0-3-200703:5 AM

Hi coolbreeze,
As you can see from other forum posts there are users experiencing crackling and popping with the NF 3 and NF 4 chipsets and the X-Fi. There should be no problems but it's better you are aware of a potential problem. I've noticed from your post you're in the America's. Don't you have a seven-day return to dealer clause/law there if I'm not correct?
Regarding sound quality I'm obviously biased so maybe some other forum users can help you on this.
John

Similar Messages

How to get the fixed result in a DES/CBC mode with fixed input data and fix

How to get the fixed result in a DES/CBC mode with fixed input data and fixed key. Below is my program , I tried to get the checksum of the DESInputData with the DESKeyData, but each time the result is different.
below is my code:
byte[] DESKeyData = {(byte)0x01 ,(byte)0x01 ,(byte)0x01 ,(byte)0x01, (byte)0x01 ,(byte)0x01 ,(byte)0x01 ,(byte)0x01 };
byte[] DESInputData = {(byte)0x31 ,(byte)0x31 ,(byte)0x31 ,(byte)0x31,(byte)0x31 ,(byte)0x31 ,(byte)0x31 ,(byte)0x31 };
SecretKeySpec skey = new SecretKeySpec( DESKeyData, "DES" );
Cipher cipher = Cipher.getInstance("DES/CBC/NoPadding");
cipher.init( Cipher.ENCRYPT_MODE, skey );
byte[] result = cipher.doFinal( DESInputData );

Use class javax.crypto.spec.IvParameterSpec to specify IV for CBC mode cipher:
// Create CBC-mode triple-DES cipher.
Cipher c = Cipher.getInstance("DESede/CBC/PKCS5Padding");
// Specify IV.
IvParameterSpec iv = new IvParameterSpec(new byte[] { (byte)0x01, (byte)0x23, (byte)0x45, (byte)0x67, (byte)0x89, (byte)0xAB, (byte)0xCD, (byte)0xEF });
// Initialize cipher with proper IV.
c.init(Cipher.ENCRYPT_MODE, yourKey, iv);
// Encrypt and decrypt should work ok now.
For more info about cryptography, search the Internet for IntroToCrypto.pdf from mr. Phil Zimmerman. This document is also part of PGP (http://www.pgp.com).
An excellent book is 'Applied Cryptography' from Bruce Schneier (http://www.counterpane.com/applied.html).
Regards,
Ronald Maas

After updating to iOS7 I am trying to log in the Game Center with my user ID and it says that is in use and I need to enter another one?

After updating to iOS7 I am trying to log in the Game Center with my user ID and it says that is in use and I need to enter another one?

You may be able to find your Apple ID at Look up your old and forgotten Apple ID

Static noise in Game mode on Windows 7

I encountered a very annoying bug/feature after I installed Windows 7 x64, and the latest driver for X-Fi Titanium: 2.7.0007. There is a good chance that the same thing happens on Vista/32bit, because this is not a problem on Windows XP.
No matter what setting you choose in Game mode, there is always some static noise when using DTS Connect / Dolby Digital Li've. You can best notice this listening to some low frequency sounds when the amplitude changes. It took me a while to figure out that it doesn't happen in the Entertainment mode. Not sure if it happens without DTS/DLL.
It looks to me like bad resampling, because DTS Connect / DDL need to mix all sources into one 48kHz output at some point. I remembered the issues I had with the good old SB Li've! when all sounds had to be software resampled to 48kHz for the best quality since the hardware resampler sucked. I tested it by resampling the souce to 48kHz using a HQ resampler, and, indeed, ?most artifacts have gone. The most artifacts are generated by CMSS-3D (anything above 50% generates noise). But even that didn't fix it completely. The only thing that helped was the Entertainment mode.
I'm not talking about noise you can hear using hi-tech equipment. I bet you could notice it using low-end speakers without a problem. Creative should add this to the documentation, or fix the issue. Remember, Game mode is the default.
Regards.

I read some other threads and I do have 4GB od RAM. I also tested XFI_SupportPack_2_0, and everything works fine there even in Game mode. Plus, DTS Neo PC also works perfectly (it couldn't be enabled with the official drivers).
I don't know if this is funny or sad. :S

HT201210 my phone is stuck in restore mode with the usb plug and the itunes symbole on the screen what can i do my phone is completly disabled

please help what can i do to fix. ive tried everything i have the latest version of itunes,and i am set as administrer on my mac whats the deal

Hi,
You could see if this helps...
DFU Mode / Unable to Update or Restore
http://support.apple.com/kb/HT1808
DFU Mode
Open iTunes and Connect the iPod to your Mac
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time
After 10 Seconds release the Sleep/Wake Button until iTunes tells you it has Detected an iPod in Recovery Mode...
The Phone Screen will remain Black... Now Restore.
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

MOVED: Problem with K8N Neo4 Platinum and Vista Ultimate

This topic has been moved to Vista problems.
https://forum-en.msi.com/index.php?topic=110040.0

Set the Maxtor hard drive to be a Sata I instead of Sata II hard drive with a jumper. Also make certain that the Sata controllers in Integrated Peripherals-IDE Devices Configuration are enabled.

Overclocking with P7N SLI Platinum and Q6600

Right now, it's "somewhat" stable at 3.6 GHz.
Here are my voltages:
CPU 1.4v
Memory 2.0v
FSB VTT 1.4v
NB 1.4v
After about 20 minutes in Vista and doing superPI I get a BSOD.
Can anyone tell me what I should raise for it to be completely stable?
By the way, I get 57 C under full load.
EDIT: I raised my CPU voltage, FSB, and NB voltage up one step. Has been running for an hour now and have run SuperPI various times and 3DMark06. I don't particularly like Prime95/Orthos but I may try it later.
Max temperature - 62C (one core, others 58C)
Idle - 48C

Quote from: polishedcar on 16-March-08, 03:39:19
Update:
Seems completely stable with these voltages
1.44 CPU
1.450 FSB VTT
1.44 NB
Temperatures are about the same
48 Idle
60ish Under full load
How long do you guys think this CPU will last me at these temps? Should I be concerned about anything? Also, I scored 17,676 in 3DMark06.
Run Prime95 ver 25+ on small ffts for about 20 mins and watch your temps. (a "true" full load on all 4 cores) If you stay under 65c on that the chip will be fine 24/7 (but to be honest I don't think your gonna be close to low 60s under a real full load with a 48c idle)

Video messed up with P6N SLI Platinum and ASUS EAX1950PRO

Specs:
CPU Intel Core 2 Duo E6600 2.4G
4 GB Patriot Ram
P6N SLI Platinum
ASUS EAX1950PRO
RocketFish 700w psu
Problem: I don't get the grpahics card post screen just the MOBO's and the video is all messed up. There are multicolored vertical blinking lines running up and down the screen. I can see through the clutter that it is posting fine (it looks for a boot device) but I figure I need to fix the graphics issue before going any further.
I am working on a new system, so at this point everything is unplugged except the RAM CPU and video card. I have tested it out switching the ram sticks out so unless they are both bad it is not the ram. What is my problem? ANy help would be rad.
Thanks
Ryan

Test your video card in a different system or try a different video card in the P6N SLI Platinum.

Popping noise on iMac core 20" anyone?

Hi
This is my first post. I aquired a core duo 20" 7 days ago (my first mac).
For no reason at all I keep hearing a 'popping' noise from the speakers. It occurs randomly, and usually when nothing is happening at all. Anyone else get this?
It is very annoying, and worry it will affect music editing at a later point.

Well to be honest the manager did try and get out of refunding at first. This is what happened at PC WORLD
"I have these problems with this mac I bought from you two weeks ago" I said
"have you called apple techical support" He said
"no" I said
"why not" he said
"I didn't want to, and I biught the mac from you not from apple" I said
"Oh he said - well let me see - (he checked his computer) well we only I have a display model left in stock" He said
(yep - he was trying to pass the one on display on to me as a replacement!!)
"not acceptable" I said
"I'm very sorry but none of our stores have any in stock at the moment, but we can deliver one" He said
"I don't think so - whats my other options" I said
"only the display model from here sir?" He said
"any other options ?" I said
"no sir sorry" He said
"I think you'll find there are" - I said
"you are eligible for a refund if you want one sir" he said (obviously realising where I was going with myu line of questioning)
"that'll do nicely" - I said
I signed a form, left the mac with him, and walked out of PCWORLD macless but with a full refund, and now I plan to buy one direct from apple.

My husband has a iphone, now i have one to. We want to work with the same calendar, but i want to play in the game center with my own name... how can i do that? and still use the same calendar

My husband has a iphone 4 8Gb, now i have one to. We want to manage our calendar with icloud. We use the apple id that my husband made, but i want to play in the game center with my one name and games. How can i do that?

Sounds like you encrypted your iPhone backup, & if so it's asking for the encrypted backup password. Do you have a company Exchange account on your phone?

My iPod touch 4th gen is stuck in recovery mode with a broken 'lock' button.

My iPod touch 4th generation is stuck in recovery mode with a black screen and I can't get it out. It has a broken lock button and I have tried everything to get it out of recovery mode. Every time I plug it into iTunes, it recognises my iPod and says 'iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used in iTunes, so I have restored it several times and every time, it says there is an unknown error. Please Help!! (my iPod is IOS 6.0.1)

What is the complete wording of the error message that says unknown error? Usually more information like a error number is also given.

MBP in closed clamshell (display closed) mode with an external display

I want to use my Macbook Pro Unibody in closed clamshell (display closed) mode with an external display
And I want to know if, the heat will damage the lcd of m macbookpro.
I want to buy a holder
http://twelvesouth.com/products/bookarc/
but i still have doubts about it the temperature and the Screen.
Thanks..

Apple says closed clamshell mode is a valid way to operate a Mac notebook, so that should be assurance enough. I don't know where the notion comes from that non-operating LCD screens can be damaged by heat. It would take a lot of heat to do damage. Way more than can be supplied by the computer itself.

Possible print in greyscale or black&white mode with empty color cartriges?

Possible print in greyscale or black&white mode with empty color cartriges and black full? (HP Photosmart Photo D7163)
Message Edited by aksser on 06-11-2009 02:12 PM

With some printers it is possible. Try going to the printer properties and selecting Grayscale pprinting.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I am trying to sync games from itunes to my ipod but after the sync is finished the games are not on my ipod and on itunes they are no longer selected. any ideas?

I am trying to sync games from itunes to my ipod touch. After the sync is done the games I checked to sync are no longer checked and nothing was actually synced. Any ideas?

Are the apps/games compatible with your model iPod and iOS?
Do you have restrictions set that prevent installing the apps? Settings>General>Restrictions
Have you successfully synced apps from that iTunes library to your computer before?

Pages won't display only in Firefox, even in safe mode (I can see requests and replies coming back but it seems like the page rendering cancels).

I have tried safe mode, all the options outlined here: https://support.mozilla.org/en-US/kb/firefox-cant-load-websites-other-browsers-can
This doesn't seem to be related to any particular site. When I try to access a web server running locally on my machine, I can see that the request is sent and the server responds as well. But the page will not render.
What I'm trying to do:
1. Open firefox, navigate somewhere (works)
2. Browse around
3. Seemingly at random, when clicking a link, it will stay in the state a:active and the new address will be displayed in the address bar, but page content will not be rendered (link still active, as I was holding the mouse button on it)
One site that it happens with, is http://fortumo.com
happens in safe mode, with or without addons and doesn't seem to be affected by the theme either.

Anything unusual if you check the Net log or the Network tab in the Web Console (Firefox/Tools > Web Developer;Ctrl+Shift+K)?
*https://developer.mozilla.org/Tools/Web_Console
Note that you need to reload the page (F5 or Ctrl+F5) to create/update the log.

Popping Noise in Game-Mode with X-Fi Platinum and Nforce 5 Mo

Similar Messages

Maybe you are looking for