Popping sounds with Behringer C1 - please help
Is anyone else using the Behringer C1 microphone and experiencing popping sounds from time to time that get recorded? I'm also using the m-audio mobile pre usb, so if anyone is using those together, and not having problems, I would love to know.
b/khgkjb
Similar Messages
-
NO SOUND with iMAC 24 - Please help
I have tried everything.........searched for drivers, everything, installed boot camp drivers from the CD numerous times.........I can't get rid of the ?pci device that shows up in the device manager. I am using windows xp sp3. The ? still shows up in the device list and I have no sound............everything else is perfect and great, but can't get sound!!!!!!!! I tried to update driver from realtek and sigmatel from the location on the hard drive and CD and no help. I DLed new drivers from realtek, no help..............does anyone know??????????
For those that are interested, this DOES work, as I have just tried this using SP3...........this is from another forum:
http://www.techarp.com/showarticle.aspx?artno=490
Basicly, download the file at the bottom of the page, unzip, go to Device Manager, right click the yellow (?) PCI driver, mark to select your own location and direct it to where you unzipped your file. That's it. UAA driver should be found and you should be able to hear sound.
If not yet, try now to re-install your audio drivers, and it should work. (if on mac, that means re-install boot camp drivers).
When doing the above, if it asks about a missing file, then point to where you just unzipped everything, it should be there, as it was for me. And, finally, in device manager, I still had one more issue for "audio device on high definition BUS" AFTER i corrected the PCI. To fix this, in device manager, I simply selected UPDATE DRIVER and use the MAC CD (or BOOTCAMP) and reinstalled the drivers and all worked fine after...................
I now have sound with my IMAC 24in and Windows XP SP3 (yes, i don't want to use much of XP at all, but it's nice to have............
Enjoy and let me know if this works or if you have issues, I would love to actually try and help...........
--pe@ce -
HT4528 my ringer will not sound with incoming calls, please help
my iphone 4s will not ring with incoming calls. any ideas on how i can fix it?
Try sliding the button that is above the volume up and down buttons to see if you have it muted.
-
my ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.
Hey erinoneill24,
Thanks for using Apple Support Communities.
Sounds like you can't update your device. You don't mention an error that it gives you. Take a look at both of these articles to troubleshoot.
iPod displays "Use iTunes to restore" message
http://support.apple.com/kb/ts1441?viewlocale=it_it
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808?viewlocale=de_DE_1
If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself.
Have a nice day,
Mario -
My iphone is not charging or showing in my computer. but its getting charged via wall apple charger.. Not able to connect with itunes.. please help....
No it doesn't. Sometimes it make a sound that it should when connecting but that is it. Never actually charges or syncs. And it is a brand new cord.
-
IPad2 no sound even reboot. Please help...
I've been having this problem for the past 2 weeks. I followed the instructions that was posted on the online forums regarding this matter.
It is still no volume but worked with earphone.
Please help, so I don't ave to bring this to the apple store.
Thank you for your help.Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
Cheers, Tom -
iPhone not being recognized and cannot be activated for service--what does this mean? I can't sync with iTunes. Please help.
When I connect iPhone to USB iTunes is giving me the above message. Please advise if you know the fix.
Thanks,
Lina1116did you find a fix?
-
My Ipod wont Sync with ITunes! Please Help!
My Ipod wont Sync with ITunes! Please Help! I have the latest version of Itunes, but my ipod will not sync with my laptop. The diagnostic test has no answers and says everything is normal. When i try to sync, it says "an unknown error occurred (-39)". Any suggestions?
check for any viruses
-
my voice call services is not working with cellular network...only works fine with wifi..please help?
Since you have already done some sort of reset on your Airport Express, you might as well make sure it was a "hard reset" - follow the instructions for a hard reset found at:
http://docs.info.apple.com/article.html?artnum=108044
Since your Mac is running Leopard, you need to configure the Airport Express using the Airport Utility found in the Applictions->Utilities folder. You cannot install the old software that was supplied on the CD you got with the Airport Express.
In future - if you do something bad with network settings on your Mac, do NOT try to fix it with the Airport Utility. The Airport Utility is only used to configure the Airport Express - and since the problem you have created is on the Mac and not the Airport Express, there is no need to be using the Airport Utility and especially there is no need to be resetting the Airport Express. -
Hello, I have a MacBook pro retina 13" early 2013, 2,6 GHz Intel Core i5 and Intel HD Graphics 4000 1024MB,
and i am not sure if I can use a 4k2k display Monitor with my Macbook, please help!Hello, Righten.
Thank you for visiting Apple Support Communities.
I understand that you want to know if your MacBook Pro will support a 4k display. Here is an article that will answer your question.
Using 4K displays and Ultra HD TVs with your Mac
Cheers,
Jason H. -
The "From" column in my Yahoo! e-mail account is blank. I trouble-shot it with them to no avail and they determined it was probably an issue with Firefox. Please help it has been like this since Monday! Furthermore, it appears fine when I view my Yahoo! e-mail while using the Google Chrome web browser.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies" -
yesterday I bought 65$ worth of iTunes music using a iTunes gift card. Then I got these emails saying I am being billed again????? What do I do???? I'm very frustrated with this. Please help me
What e-mail are you talking about?
What exactly did it say?
Are you sure that the e-mail was not your receipt? -
i need the drivers for earl 2011 macbook pro 13 inch i7 4 gigs for windows 7 64 bits i tried downloading with bootcamp butt it never completes allways ends up with an error please help if any one has the drivers or knows were i can download them
Doug...
If you don't have it for reference, the manual might come in handy > US/Boot_Camp_Install-Setup.pdf
After it loads, Command + F to find information regarding the drivers. -
the sound on my ipad 3 suddenly stopped working i dont know why i tried the last two days to fix it and also restored it and the sound never came back, please help.....
Do you get sound on any apps e.g. Music and Videos but not others ? If you do then have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085 -
Hi
When i am trying to restore backup to my iphone, its coming up backup is not compatible with iphone. Please help me restore.
Thanks
MandyFrom the article that the question was posted from:
Error 1611
This error typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
Try reading the solutions you find in the future and follow them.
Maybe you are looking for
-
I am trying to open iTunes on my Windows 7 PC and am getting the following message...the itunes library can not be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder. Any ideas?
-
How can I transfer music from my iPod to the computer?
How can i get music from my ipod to my computer? My computer was messed up so I've had my ipod on another computer. Now its fixed and i want to know how I can get the library on my ipod from the other computer to join the one on this computer.
-
HI In SSP Portal, unable to download the report to Excel file. Is the issue is with Portal or any technical error. message while exporting the report An applet is trying to get file information, Do you agree? Regards Pratap J Edited by: pratap jagada
-
Need to kill the dead line menotoring
hi friends In my workflow i have done dead line menotoring. In the loop i have given mail step and loop condition priority = 8 . Now my loop runs infinitely am getting many mails. How to stop it. I have set 3 min time for dead line. So every 3 min am
-
Cache refresh of single object interferes with normal message processing
Hi When we do an update of an object in Integration Directory and activate change list AND a message (from a different scenario) is processed through Integration Engine at the same time, the message fails with "No RFC authorization for user <USER>" +