Pops when starting and stopping

I thought that this issue might be related to my m- audio firewire, but i disconnected it and there still occurs a slight static 'pop' when i start or stop a track w/ the space bar. If anyone has had this experience or has any insight to this kind of thing please help...

Thank you, sir. I muted my audio regions and it seemed to considerably decrease this 'popping'. However, I tried this on a piece with multiple midi tracks and it's still pretty evident, especially moving the pointer around. I am mainly concerned if there is something either wrong with my electric setup or something otherwise damaging, but it is annoying as well... thanks again for your reply.

Similar Messages

How to eliminate the "Ping" sound when starting and stopping videoing

How to eliminate the "ping" sound when starting and stopping a video on iPhone. Thanks.

I asked my friends on Facebook and one came up with the answer... I just had to flip the little "ring-silent switch" on the side of the iPhone to cut the "Pinging" sound! There's probably another way but this works!

Iphone 3G shows Apple logo when starting and stops there.

Hi, I just got an Iphone 3G 16GB yesterday from a person who had it for 10 days and did not like it. Before giving it to me me he did a general reset using the optino in the settings menu. When he gave it to me the Iphone was still doing the reset and it took 2 hours and 40 minutes to end it. At the end of the reset the screen showed the Apple logo and does not go further. All of this was done with the Iphone plugged in a power outlet to avoid interrupting the operation.
I left it on for all the night just hoping it was a very long procedure but with no results (still the Apple logo and nothing else). This morning I tried to turn it off keeping the sleep/wake button pushed for some time but id did not even shut down. The only way I found to shut it down was to to push the Home button and the sleep/wake button together for a few seconds. When I tried to turn it on again pushing the sleep/wake button it showed the Apple logo again and nothing happened.
COuld someone help me?
Thanks in advance.

Just to report that the problem was solved with Apple Support. They asked me to start Itunes, connect the usb cable to the computer, push the home button while connecting the USB connector to the Iphone. This way Itunes recognized the Iphone in recovery mode and restored everything automatically.
Now the Iphone is working perfectly.
Hope this helps.

HT6058 I have updated my I pad dut I'm still having problems my iPad seems to freeze and when I go to put in my pin it take a few seconds before the numbers go in and my games stop and start and stop and start for a bit before they run properly

I have updated my I pad dut I'm still having problems my iPad seems to freeze and when I go to put in my pin it take a few seconds before the numbers go in and my games stop and start and stop and start for a bit before they run properly

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
 Cheers, Tom

When watching videos it will start and stop.

when watching vids it will start and stop. what causes it to do this? wondering.
This question was solved.
View Solution.

sdh1975 wrote:
when watching vids it will start and stop. what causes it to do this? wondering.
Hi,
Are you talking about online or offline ? If online, the connection speed may be not fast enough.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I am trying to create a ringtone, when I right click and and go to get info I can't open anything under options. Itunes is not allowing me to do anything under options including changing the start and stop times. ??

I am trying to create a ringtone, when I right click and and go to get info I can't open anything under options. Itunes is not allowing me to do anything under options including changing the start and stop times. ??

GarageBand '11 - Create an iPhone ringtone - Apple Support

When I acquire data using USB6008 and NI_DAQmx Base in VC++, Shall I start and stop the task in ONTimer function?

void Ctest2Dlg:nTimer(UINT nIDEvent)
   DAQmxErrChk (DAQmxBaseStartTask(taskHandle));
   DAQmxErrChk (DAQmxBaseReadAnalogF64(taskHandle,pointsToRead,timeout,DAQmx_Val_GroupByScanNumber,data,100,&pointsRead,NULL));
  DAQmxBaseStopTask (taskHandle);
If I do this, the program will halt in about half minute. But if I do not start and stop task in OnTmer function, the program will not halt and the data acquired is not corrected.
Please help me! Thanks

This is a duplicate post. Please post any new replies to the linked forum.
Samantha
National Instruments
Applications Engineer

How to Starting and Stopping OC4J Server using Ant

How to Starting and Stopping OC4J Server using Ant
In the ant task definitions for ant-oracle-classes.jar (see antlib.xml) there are two tasks called
     name="restartServer" classname="oracle.ant.taskdefs.deploy.JSR88StartServer"
     name="shutdownServer" classname="oracle.ant.taskdefs.deploy.JSR88ShutdownServer"
I thought that these would shutdown and start the OC4J server. I guessed the parameters as – (Does anyone know where 50 ant targets are documented?)
<oracle:restartServer
userid="${oc4j.admin.user}"
     password="${oc4j.admin.password}"
     deployeruri="${deployer.uri}"
/>
<oracle:shutdownServer
     userid="${oc4j.admin.user}"
     password="${oc4j.admin.password}"
     deployeruri="${deployer.uri}"
/>
This, however does not start and stop the SOA suite. To do that I've hacked this solution together -
<path id="oc4j.console">
     <pathelement location="${oracle.home}/config"/>
     <pathelement location="${oracle.home}/jlib/startupconsole.jar"/>
     <pathelement location="${oracle.home}/opmn/lib/optic.jar"/>
     <pathelement location="${oracle.home}/lib/xmlparserv2.jar"/>
</path>
<target name="stop" description="stop oc4j server" depends="init">
     <java classname="oracle.appserver.startupconsole.view.Runner">
          <classpath refid="oc4j.console"/>
          <sysproperty key="ORACLE_HOME" path="${oracle.home}"/>
          <arg value="stop"/>
     </java>
</target>
<target name="start" description="restart oc4j server" depends="init">
     <java classname="oracle.appserver.startupconsole.view.Runner">
          <classpath refid="oc4j.console"/>
          <sysproperty key="ORACLE_HOME" path="${oracle.home}"/>
          <arg value="start"/>
     </java>
</target>
This sort of works – except when the SOA suite doesn't stop cleanly – and needs user interaction to press a Close button. This isn't very useful when doing a continous integration build and deploy.
So, does anyone have any suggestions or alternative methods to do this?
- frank

Actually if the server throws exceptions when it stops (which it always has since we applied patch 10.1.3.3) this technique will pause until a user responds to pop-up ... So a better way (I think) is -
<target name="start" description="start oc4j server" depends="init">
<java classname="oracle.appserver.startupconsole.view.Runner">
<classpath refid="oc4j.console"/>
<sysproperty key="ORACLE_HOME" path="${oracle.home}"/>
<arg value="start"/>
</java>
</target>
<target name="stop" description="stop oc4j server" depends="init">
<echo message="We expect OC4J *NOT* to stop cleanly, so we will timeout after 3 minutes ..."/>
<java classname="oracle.appserver.startupconsole.view.Runner" fork="true" timeout="180000">
<classpath refid="oc4j.console"/>
<sysproperty key="ORACLE_HOME" path="${oracle.home}"/>
<arg value="stop"/>
</java>
</target>
<target name="restart" description="restart oc4j server">
<antcall target="stop"/>

<waitfor maxwait="2" maxwaitunit="minute">
<not><http url="http://${oc4j.http.hostname}:${oc4j.http.port}"/></not>
</waitfor>
<antcall target="start"/>
</target>

I am getting a voltage spike on starting and stopping a daqmx task

Hello,
I am having a problem with a PXI-4461 DSA board that I can't explain. When starting or stopping an analog output task, I am getting a voltage spike before the generation starts and after it stops. We have put a speaker on the output, and the spike sounds like a "pop" when that happens. However, the pop goes away when the card is also acquiring an analog input in the card. This is a repeatable event, and very strange. We have used the two examples "ContAcqGraph Voltage" for the analog input and the "Retriggering_Analog_Output_Waveform_Generation" to generate this phenomena.
Has anyone ever seen this before? Is our card the culprit?
Thanks,
Rob

Hey Rob,
I found out some information that might be helpful to you. There was a problem identified with that particular SVT example awhile ago where spikes would happen due to a Device Reset during the generation. This device reset was performed by default in the example if there was an error with the AO generation. Since your code was based off of this example, I believe that there's a Device Reset happening due to some error. If you could, please go through your application and ensure proper error chaining so that any errors generated are seen by the user. You can also go through and probe the error clusters coming out of the VIs in order to get a quick picture of what might be happening.
The specific VI in question is "SVT Close Swept Sine (DAQmx).vi". You can set a breakpoint before the "DAQmx Reset Device.vi" on the block diagram and verify that this is happening(see attachment screenshot). Let me know what you find out.
Good luck
Gavin Goodrich
National Instruments
Attachments:
svt_close_swept_sine.jpg ‏35 KB

I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.

I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.

You don't need to upgrade your software. But if you're struggling with Spry, IMO you should cut your losses and switch to something better for the longrun.
If you have a budget to work with, I highly recommend Project Seven's Pop-Menu Magic 3. It's easy to use in DW CS4, 5, 6 or CC. More importantly, it's bullet proof and works in all devices.
Pop-Menu Magic3 by PVII (commercial DW extension)
http://www.projectseven.com/products/menusystems/pmm3/index.htm
If you don't have a budget to work with, you can roll your own menus with jQuery plugins. A bit more effort on your part, but they perform better than Spry.
jQuery Superfish
http://users.tpg.com.au/j_birch/plugins/superfish/
jQuery MegaMenu2
DEMO:
http://www.geektantra.com/projects/jquery-megamenu-2/
DOWNLOAD:
http://code.google.com/p/jquery-megamenu/
Nancy O.

Need help getting Tomcat 5.0.28 to start (and stop, eventually)

Hi!
I am such a newbie to the Terminal and writing scripts, so please forgive my naiveté. I have successfully installed Tomcat in my /usr/local directory, but I am having trouble creating files to start and stop Tomcat, per the instructions on the following page:
http://developer.apple.com/internet/java/tomcat1.html
I've followed the directions but continue to get the following error after I execute ~/bin/start_tomcat.
-bash: start_tomcat: command not found
My file contains the following code:
#!/bin/sh /n
export CATALINA_HOME=/usr/local/jakarta-tomcat-5.0.28 /n
export JAVA_HOME=/usr /n
$CATALINA_HOME/bin/startup.sh /n
If anyone can help me, I would really, really, really appreciate it!
Thanks!
PowerBook G4 12" Mac OS X (10.4.5)

Why are there all those "/n" there? Either you or the place you copied from has the wrong slash. But still, it's wronger than that to have them at all: "\n" means a newline (i.e., press "return") not the actual "backslash en" characters. Sometimes people post code with those \n visible: by making it explicit where a line-break should be, one doesn't have as much trouble when a web browser reformats the text and puts line breaks where they don't belong.

Printing event start and stop times

In month view, is there any way to have both the start and stop times for an event show when you print the calendar so you can see the duration of an event - thanks.

You might be able to use this script to reset the start/stop times to zero. Try with a small selection and see if it works for you.
http://dougscripts.com/itunes/scripts/ss.php?sp=batchtrimtime

Start and stop a loop automatically subtracting at each iteration

Hi there,
I know that there are some topics about it, but I could not find any solution, especially because I use the version 7.1 and cannot open new version files.
My problem is as follows:
I need to charge a tank from 6 to 10 in the morning, every day during 3 days. The process must start and stop automatically, which means, no bottoms to start or stop. The start and stop conditions come from the hour.
I start with a big loop of 72 iterations, which corresponds to 72 hours.
The tank must start at level 6 every time it starts.
After the start, 1 unit must be subtracted in each iteration. Which means, that at 6 am the tank has level 10, at 7 am level 9 and so on. In the end, at 10 am the tank level is equal to 2.
In the next day, the process must start again and the tank must start at level 6.
Any suggestions? Thanks in advance.
Solved!
Go to Solution.

While this may work it can be improved significantly. This really isn't a state machine. This is basically the same as your flat sequence with the exception of using a While loop with a Case statement to implement each frame.
You should define what your actions are and create a typedefed ENUM naming them. State names of 1 through 24 are meaningless. Not to mention in your code many of the cases are duplicates of others. That would mean that all of those can be one state with logic to determine what action/state comes next. A properly defined state machine would not need the outside For loop. Without knowing your specific needs some examples of reason state names would be the following: Start, Stop, Exit, Error, Initialize, Get Tank Level, Fill Tank, Drain Tank, Idle, etc. Can you see how these are easier to understand than 1 through 24.
There are lots of examples of state machines here. Try a search and take a look at some of them.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

My ipod nano 7th gen. won't save the changes I make to a song's start and stop time. How do I fix this?

So I have a few songs that I don't like the intro to or the end of it that I had cut to where I wanted on my previous ipod. When I try to do the ame thing with this one with the start and stop time, it will work for awhile and then randomly start and stop where it had originally. I have done it like 4 times now for some songs and I can't seem to get it to stick. Suggestions?

If you use the Sync feature in iTunes, then it needs to be done to the song in your Music Library, then synced with the iPod. If you do not use the Sync feature and are performing the changes to the song on your iPod specifically, then the setting may be getting overwritten when you drag the song that's already on the iPod back onto the iPod. It will overwrite all local settings for the song on the iPod with the settings in your library.
Try performing the changes to the song in your music library, and then dragging it back over to your ipod (or Sync your iPod if you use that feature). This will make sure that the setting are consistent in both your library and iPod in-case you were to ever overwrite the song once more.

Hard drive starts and stops a few times

I went to my parents for the Christmas holidays today and tried to use their older computer to put music on to my iPod. Since it's so old I couldn't use iTunes, so instead I used Ephpod. After it was done copying the files to the iPod I saved the changes and disconnected, but immediately afterwards instead of going straight to the menu, the hard drive started and stopped about 10-15 times with the Apple logo being displayed. Now I can't reach the menu, the hard drive will start and stop spinning until it gives up, and when I reconnect it to the computer it won't even recognize it as an external drive. Any ideas?
eMac Mac OS X (10.4.3)

I have the same issue and the iPod wont reset.

Pops when starting and stopping

Similar Messages

Maybe you are looking for