Populate header and detail
Hi,
I have an internal table with the value below. I need to populate to header data line (1 record only) and detail is an internal table
When there is a change of customer, i need to copy 123 to header and 2 records of material (abc & xed), sales (100 & 200) and qty (10 & 12) to detail internal table.
for customer 567, i need to copy to header and material aqs, sales 150 and qty 5 to detail internal table.
May I know how can I achieve this?
customer material sales qty
123 abc 100 10
123 xed 200 12
567 aqs 150 5
877 abc 140 8
Thanks
Rgds
Hello,
As per my understanding, your requirement is that you have an internal table which has a combined data and you want to split it into headr and detail internal tables, based on the change of the customer number which is the first field in the combined internal table. If so then assume that it_com is the combined internal table and it_head and it_det as the header and detail interbnal tables respectively.
First sor the combined internal table on customer number
sort it_com by kunnr.
Now loop across this table and on the event at new customer populate the header table and in the remaining loop populate the detail table.
loop at it_com into wa_com.
at new kunnr.
wa_head-kunnr = wa_com-kunnr.
append wa_head-kunnr to it_head-kunnr.
clear wa_head-kunnr.
endat.
append the records from the combined table into the item table, whatever fields required
endloop.
Regards,
Sachin
Similar Messages
-
Keeping heading and detail on the same page
Hi, I have a report with a group header section and a detail section. How can I keep the heading section and all the detail section on the same page without starting each group on a new page?
The detail section will have either 2 or 3 records with some of the objects set to grow if the data doesn't fit on one line. This results in several changes of group appearing on the same page which is what I want. However, what I don't want is the header section on one page with the detail section on the next, or the header and some of the detail records on one page with the rest of the detail records on the next. What I would like is the report to start a new page if the header and all the detail records don't fit on the same page but without starting a new page for every group change. How can I achieve this?you can put the group header and details into a sub report on the old group header section.
then hide the details section -
File content conversion - sender adapter for Header and detail records
Hi Experts,
I am receiving a field of fixed length content format.(Header)The first line of the file will follow the structure X having some fields and (DetailRecord)subsequent lines in the file will follow structure Y having somes fields.There is no record identifier for Header and Detail records.In one file first line is Header records and remaining subsequent line is DetailRecord.What are the parameters we have to set for sender file content conversion parameters as i donot have any key field and key field value.And in one file we have only one header records ( first line) and n number of detail records from 2nd line onwards.
Thanks
DeepakHi
Refer the below fourm link,
Flat file whitout id
Regards
Ramg. -
XMLSequence EXTRACT HEAD and DETAIL in ORACLE 9.2
Hi, sorry about my english i am from argentine.
I have this XML:
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<arrayOfServicio >
<Servicio>
<Nombre>Autenticacion</Nombre>
<Descripcion>ws</Descripcion>
<Activo>true</Activo>
<Version>1.0</Version>
<MetodosEntity>
<Metodo>
<Nombre>RequestTicket</Nombre>
<Activo>true</Activo>
<Version>1.0</Version>
</Metodo>
</MetodosEntity>
</Servicio>
<Servicio>
<Nombre>Consultas</Nombre>
<Descripcion>wsConsultas</Descripcion>
<Activo>true</Activo>
<Version>1.0</Version>
<MetodosEntity>
<Metodo>
<Nombre>GetVigencia</Nombre>
<Activo>true</Activo>
<Version>1.0</Version>
</Metodo>
<Metodo>
<Nombre>GetSiniestralidad</Nombre>
<Activo>true</Activo>
<Version>1.0</Version>
</Metodo>
<Metodo>
<Nombre>GetAgrupados</Nombre>
<Activo>true</Activo>
<Version>1.0</Version>
</Metodo>
<Metodo>
<Nombre>GetSiniestralidadPorCuil</Nombre>
<Activo>true</Activo>
<Version>1.0</Version>
</Metodo>
</MetodosEntity>
</Servicio>
<Servicio>
<Nombre>Referencias</Nombre>
<Descripcion>wsReferencias</Descripcion>
<Activo>true</Activo>
<Version>1.0</Version>
<MetodosEntity>
<Metodo>
<Nombre>TablaReferencia</Nombre>
<Activo>true</Activo>
<Version>1.0</Version>
</Metodo>
<Metodo>
<Nombre>ListadoReferencia</Nombre>
<Activo>true</Activo>
<Version>1.0</Version>
</Metodo>
</MetodosEntity>
</Servicio>
<Servicio>
<Nombre>General</Nombre>
<Descripcion>WsGeneral</Descripcion>
<Activo>true</Activo>
<Version>1.0</Version>
<MetodosEntity>
<Metodo>
<Nombre>GetServicios</Nombre>
<Activo>true</Activo>
<Version>1.0</Version>
</Metodo>
</MetodosEntity>
</Servicio>
<Servicio>
<Nombre>eServicios</Nombre>
<Descripcion>wseServicios</Descripcion>
<Activo>true</Activo>
<Version>1.0</Version>
<MetodosEntity>
<Metodo>
<Nombre>SetComunicacion</Nombre>
<Activo>true</Activo>
<Version>1.0</Version>
</Metodo>
</MetodosEntity>
</Servicio>
<Servicio>
<Nombre>VentanillaART</Nombre>
<Descripcion>wsVentanillaART</Descripcion>
<Activo>true</Activo>
<Version>1.0</Version>
<MetodosEntity>
<Metodo>
<Nombre>ObtenerNovedades</Nombre>
<Activo>true</Activo>
<Version>1.0</Version>
</Metodo>
</MetodosEntity>
</Servicio>
<Servicio>
<Nombre>Establecimientos</Nombre>
<Descripcion>wsEstablecimiento</Descripcion>
<Activo>true</Activo>
<Version>1.0</Version>
<MetodosEntity>
<Metodo>
<Nombre>GetConsultaPorCuit</Nombre>
<Activo>true</Activo>
<Version>1.0</Version>
</Metodo>
</MetodosEntity>
</Servicio>
</arrayOfServicio>
I am working in ORACLE 9.2 and i wrote this query but the result is not correct, i need to join HEAD and DETAIL in some way but cannot do that...
select extractvalue(value(head),'//Servicio/Nombre/text()') ,
extractvalue(value(head),'//Servicio/Descripcion/text()'),
extractvalue(value(head),'//Servicio/Activo/text()'),
extractvalue(value(head),'//Servicio/Version/text()')
,extractvalue(value(detail),'//Metodo/Nombre/text()')
,extractvalue(value(detail),'//Metodo/Activo/text()')
,extractvalue(value(detail),'//Metodo/Version/text()')
from arwt_ws_return x
, table(xmlsequence(extract (x.x_xmldoc, '/arrayOfServicio/Servicio'))) head
, table(xmlsequence(extract (x.x_xmldoc, '/arrayOfServicio/Servicio/MetodosEntity/Metodo'))) detail;
Ii really appreciate your help.
Thanks!Hi,
You can do that by passing the head element to the second XMLSequence. That way you maintain the correlation between the parent and its children :
select extractvalue(value(head), '/Servicio/Nombre') as srv_nombre
, extractvalue(value(head), '/Servicio/Descripcion') as srv_desc
, extractvalue(value(head), '/Servicio/Activo') as srv_activo
, extractvalue(value(head), '/Servicio/Version') as srv_version
, extractvalue(value(detail), '/Metodo/Nombre') as met_nombre
, extractvalue(value(detail), '/Metodo/Activo') as met_activo
, extractvalue(value(detail), '/Metodo/Version') as met_version
from arwt_ws_return x
, table(xmlsequence(extract(x.x_xmldoc, '/arrayOfServicio/Servicio'))) head
, table(xmlsequence(extract(value(head), '/Servicio/MetodosEntity/Metodo'))) detail
Please also note that :
- you don't need a descendant axis (//) if you know the exact path
- you don't need to go down to the text() node if you're using extractvalue
Hope that helps. -
DMEE issue in header and detail record
Hi Gurs,
I am working in DMME payment medium .
I have declared DMEE header structure(00000001000001 ) as level 1 and detail (050000010020192 XX110000001) as also level 1.
This is the output format i am getting.
00000001000001
05000001002000 XX110000001
00000001000001
05000001002012 XX110000002
00000001000001
05000001002012 XX110000003 00000001000001
05000001002011 XX110000004
But my requirment not lke this. i need to dispaly all detail items under one header also i need to increase the counter for every items starting from 2.
Both header and detail are at level 1.If i declared the detail as level 2 the output is not generated.
This is what i need.
00000001000001
05000002002000 XXX110000001
05000003002012 XXX110000002
05000004002012 XXX110000003
05000005002011 XXX110000004
Pls suggest me any solutions
Thanks .NOT answered
-
DMEE Issues header and detail record
Hi Gurs,
I am working in DMME(PAYM) payment medium .
I have declared DMEE header structure(00000001000001 ) as level 1 and detail (050000010020192 XX110000001) as also level 1.
This is the output format i am getting.
00000001000001
05000001002000 XX110000001
00000001000001
05000001002012 XX110000002
00000001000001
05000001002012 XX110000003 00000001000001
05000001002011 XX110000004
But my requirment not lke this. i need to dispaly all detail items under one header also i need to increase the counter for every items starting from 2.
Both header and detail are at level 1.If i declared the detail as level 2 the output is not generated.
This is what i need.
00000001000001
05000002002000 XXX110000001
05000003002012 XXX110000002
05000004002012 XXX110000003
05000005002011 XXX110000004
Pls suggest me any solutions
Thanks .
Edited by: bala chandran on Oct 9, 2009 10:57 AMNOT answered
-
I need to display data from both header and detail, details has to come from other table also
--CREATE TABLE
CREATE TABLE [dbo].[Table_Dept](
[DeptId] [int] NULL,
[DeptCode] [char](2) NULL,
[DeptName] [nvarchar](100) NULL
) ON [PRIMARY]
CREATE TABLE [dbo].[Table_Detail](
[Header_ID] [int] NOT NULL,
[Name] [nvarchar](50) NOT NULL,
[DescValue] [nvarchar](max) NULL
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
CREATE TABLE [dbo].[Table_Header](
[Header_Id] [int] NULL,
[UserName] [nvarchar](50) NULL
) ON [PRIMARY]
--INSERT DATA
INSERT INTO Table_Dept (DeptId, DeptCode, DeptName)
VALUES (1, 'HO', N'Head Office'),
(2, 'BO', N'Branch Office'),
(3, 'RO', N'Reginal Office'),
(4, 'SO', N'Sub Division Office')
INSERT INTO Table_Header
(Header_Id, UserName)
VALUES (1, N'Ravi'), (2, N'Gopal'), (3, N'Deepa')
INSERT INTO Table_Detail
(Header_ID, Name, DescValue)
VALUES (1, N'ListNumber', N'1005'),
(1, N'PhaseCode', N'AA'),
(1, N'DeptCode', 'BO,RO'),
(1, N'City', 'Bangalore'),
(2, N'ListNumber', N'1006'),
(2, N'PhaseCode', N'AB'),
(2, N'DeptCode', 'SO,RO'),
(2, N'City', 'Delhi'),
(3, N'ListNumber', N'1007'),
(3, N'PhaseCode', N'AA'),
(3, N'DeptCode', 'HO'),
(3, N'City', 'Mumbai')
--EXPECTED RESULT
HeaderId
ListNumber
PhaseCode
DeptName
City
User
1
1005
AA
Branch Office, Reginal Office
Bangalore
Ravi
2
1006
AB
Sub Division Office,Reginal Office
Delhi
Gopal
3
1007
AA
HO
Mumbai
Deepa
ShanmugaRajsee below code
SELECT *,
STUFF((SELECT ',' + DeptName
FROM Table_Dept
WHERE ',' + t.DeptCode + ',' LIKE '%,' + DeptCode + ',%'
FOR XML PATH('')),1,1,'') AS DeptName
FROM
SELECT h.Header_ID,
td.ListNumber,
td.PhaseCode,
td.DeptCode,
td.City
FROM Table_header h
INNER JOIN (SELECT Header_ID,
MAX(CASE WHEN Name = 'ListNumber' THEN DescValue END) AS ListNumber,
MAX(CASE WHEN Name = 'PhaseCode' THEN DescValue END) AS PhaseCode,
MAX(CASE WHEN Name = 'DeptCode' THEN DescValue END) AS DeptCode,
MAX(CASE WHEN Name = 'City' THEN DescValue END) AS City
FROM Table_Detail
GROUP BY Header_ID)td
ON td.Header_ID = h.Header_ID
)t
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
In case of not having department table...consider the dept code, where the values are now comming from table and
need result if the data is not displayed from table and they are static..
use case when 'Bo' then 'Branch Office'
when 'Ro' then 'Reginal Office'
when 'So' then 'Sub Division Office'
when 'Ho' then 'Head Office'
kindly suggest how to replace my above query
ShanmugaRaj -
Saving an invoice header and details in sql in one stored procedure.
I would like to create an invoice in visual studio 2008 with a header and x amount of details (every time it's different). I want to be able to bring it all into sql encapsulated in one begin and commit transaction so that if there is an error anywhere
on the way it can roll back and nothing will be saved to the database.
Debra has a questionI have an article on my web site which includes a sample not too different from your situation. (In the sample data is read from a file, but that has little to do with the database communication.) Since you pass the data through TVPs, you can have the transaction
in the stored procedure:
http://www.sommarskog.se/arrays-in-sql-2008.html
Erland Sommarskog, SQL Server MVP, [email protected] -
Header and Detail total mismatch
Hi All,
I have file to proxy scenario, and i am using XSLT mapping for source to Traget mapping,
Here, I add all amounts in details and compare it to Header amount, issue is that although the totals are matching i am still getting total mismatch error.
The number have 2 decimal places.
This is the code that i am using:
<xsl:if test="format-number(number($vInvoice),'#.00') != format-number(sum(a:MT_PaymentData/RecordSet/RecordLineItem/LineItemAmount),'#.00')">
<xsl:value-of select="string('AmtMisMatch ')"/>
</xsl:if>
Pls advice,
XIerHi,
Did you try to use it in your mapping? I mean import the zip in your Interface Mapping and try to execute it there.And see if you are getting the wrong output still. Even i was getting the wrong output in the XMLSPY for my code. But when i implemented the same code in mapping it worked fine.
Regards,
Sanjeev. -
Need to skip page break between header and Detail sections
Hello,
I am combining two reports in one report (one in header section and another report in the body section). when this report is run, there's a page break between these two sections. Is it possible to eliminate it? Ideally I would like the detail section to start as soon as the header section of the report is completed in the same page instead of starting (detail section report) in a new page.
Any help is highly appreciated. Thanks,
SundarI'd put them into one section to control the breaks.
-
How to validate date between Header and Detail Block..
Hi All,
I was trying to find a way where, suppose I enter 'from date' and 'to date' in the header block.then in detail block all 'from dates' and 'to dates' should be restricted between the dates entered in the header block.
Thank youOr U Can Simply set in the child item lowest / highest Allowed Value
Invoke Property pallete for child date item and set the following
lowest Allowed Value :header.from_date (must be prefix with :)
Highest Allowed Value :header.to_date
siju.koiply -
Creating view cluster for a header and detail table
Hi all,
I want to create a View cluster for maintaining 2 tables (one is the header table and other is the detail table)
....for each line in the header table there can be multiple detail line items...
If anyone has worked on such requirement...please tell me how should i go about developing it.
after creation i should be able to maintain the cluster using transaction SM34....
Thanks ,
Sushil.hi
refer to following link
http://help.sap.com/saphelp_nw04/helpdata/en/d0/999246b2aa11d1a5700000e82deaaa/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/d0/999246b2aa11d1a5700000e82deaaa/frameset.htm
Cheers
Snehi -
Mapping header and detail fields
I want to map concatenated 1 header source field and 2 detail source fields into 1 target detail row field. Is it possible? I am getting message mapping error in SXMB_MONI. I changed the DT_Detail_Row.fieldFixedLengths, still getting error. Any suggestions or ideas how I can map these fields?
Thanks.Hey,
y cant u use 2 Staandard concat functions
where u concat ur two source fields using one concat and concat that output with the header source field using another concat fucntion and map that output to target field.
detail1
Concat----
>
detail2 concat----->target
Header----
>
cheers
jithesh -
Hello All...
MDKP table is the header data for the MRP document. Does anyone know
if there is a table for the details?I believe that the MRP item data is stored in a data cluster. The database
table is MDTC, and the data cluster area is ar. Use the following command to
import the data from the data cluster:
Import <structure> from database mdtc(ar) ID <key>.
The ID key value comes from the field dtnum (Number of the material
requirements planning table) in table MDKP. For an example, take a look at
line 56 in the form 'aufbauen_mdoex' in program SAPLM61X.
Hope this helps. -
ALV Header and details in the report
Hi Experts,
I have the following requirements for the report:
Company Code: -->Report Header
Plant:
Posting Date:
Material Jan Amount Feb Amount March Amount --> Header info
Sales order number Delivery dates Order dates Qty UOM Amount -->Details Info
1234 1,000.00 500.00 300.00 --> Header info
0001 02/02/2008 01/02/2008 10 PC 60.00 -->Details Info
0002 02/03/2008 01/02/2008 5 PC 30.00
0003 02/03/2008 01/02/2008 12 PC 70.00
0004 02/04/2008 01/02/2008 14 PC 90.00
0005 02/06/2008 01/02/2008 10 PC 60.00
5678 2,000.00 400.00 300.00 --> Header info
0001 02/02/2008 01/02/2008 10 PC 60.00 -->Details Info
0002 02/03/2008 01/02/2008 5 PC 30.00
0003 02/03/2008 01/02/2008 12 PC 70.00
0004 02/04/2008 01/02/2008 14 PC 90.00
0005 02/06/2008 01/02/2008 10 PC 60.00
the report should look like the one above. How can I develop this in ALV Grid or List? Thanks so much!
Best Regards,
KurttHi,
You can use Hierarchial ALV.
Refer:-
BCALV_TREE_01 ALV : tree control: build up the hierarchy tree
BCALV_TREE_DND ALV : tree control: Drag & Drop within a hierarchy tree
BCALV_TREE_DND_MULTIPLE ALV : tree control: Drag & Drop within a hierarchy tree
Hope this solves your problem.
Thanks & Regards,
Tarun Gambhir
Maybe you are looking for
-
HT201407 How do I use my Apple ID after my iPhone's been reactivated?
Hello, my iPhone 5 was unplugged accidentally while downloading and uprgrading the newest iOS software, causing it to reactivate. When it turned back on eventually it won't unlock unless I enter my Apple ID and password, which now also won't work. Wh
-
How can I transfer all my Iphone informations to my sim
How can I transfer all my Iphone informations to my sim?
-
Data target error when opening InfoPackage (not loadable)
Hi, I have transported my objects from the development environment to QA environment, but now when I try to open one specific InfoPackage (in QA) to schedule a data load to an DSO, I receive the following error: Data target 'P_USUARIO ' removed from
-
Right now I'm writing my final thesis. I have developed a model for role-based access control and now I'm conducting a short evaulation of Identity Server to see how well it handles my model. It's obvious Identity Server is highly expandable to suit
-
Limit on max # of LiveOffice objects in one file?
I'm working with an excel file that is using many LiveOffice objects, and until Friday, it worked like a charm. However, on Friday, I realized that I needed one more LO object - a single cell to tell me the last date refreshed on a saved query, and