Populate user exit Variable with User Authorizations using ABAP?

Hi, Does anyone know of a way to populate a user exit variable (with ABAP) with the Authorization Values for a user running a report? I am turning off authorizations for our InfoProvider using RSSM and want to populate a variable instead and use the variable as a filter.

Hi Kenneth ,
You need dynamic authorization in your report .This can be done at query runtime by using exit variable and writing cmod code for the same .
This code will read authorization maintained at runtime of query in i_step = 1 and will pass input var values accordingly .
For step by step information you can access this document .
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0f9f33c-0f17-2d10-d3a2-ae52ccd00780?quicklink=index&overridelayout=true
Hope this will be helpful .
Regards,
Jaya Tiwari

Similar Messages

Map the user exit variables with the queries/cubes using them

Hello Friends,
What are the post unicode conversion tests that you can perform on front end/existing queries?
is there any added advantage for queries due to unicode?
is testing the working of variable enough? is there any table to map the user exit variables with the queries/cubes using them?
Thanks
Tanya

Guys, any clue about this? Answer are appreciated.
Thanks
Tanya

User Exit Variable for Bex in CMOD (ABAP Code)

Hi Experts
My requirment is to develop a Restricted Keyfigure...
The restriction is based on 0Calmonth (Calendar Year/Month)
The sales from beginning of calendar year up to last "closed" month in a Calendar.
Ex: in June i want to see 01.01.2009 to 31.05.2009 data.
 in October i want to see 01.01.2009 to 30.09.2009 data.
When user execute the report
 in Jan 2010 i want to see 0 as there is no closed month in that particular year.
 in Fed 2010 i want to see 01.01.2010 to 31.01.2010 data.
For that purpose i need to create a User Exit variable in CMOD...
I am struggling to get an idea on how to write a code to meet the requirment
Please help me with code that i can use in cmod
Thanks in advance

Hi,
Use the following code :
when' variable name ' .
DATA : year(4) type n,
month2(2) type n,
date_in type sy-datum,
date_op type sy-datum.
IF I_STEP = 1.
CLEAR L_S_RANGE.
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
month2 = sy-datum+4(2).
if month2 = '01'.
concatenate sy-datum+0(4) '01' '01' into l_s_range-low.
l_s_range-high = sy-datum.
else.
month2 = month2 - 1.
clear : date_in, date_op.
concatenate sy-datum+0(4) month2 '01' into date_in.
CALL FUNCTION 'SLS_MISC_GET_LAST_DAY_OF_MONTH'
EXPORTING
 DAY_IN = date_in
IMPORTING
 LAST_DAY_OF_MONTH = date_op
EXCEPTIONS
 DAY_IN_NOT_VALID = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
concatenate sy-datum+0(4) '01' '01' into l_s_range-low.
l_s_range-high = date_op.
endif.
APPEND L_S_RANGE TO E_T_RANGE.
ENDIF.
I dint know what output do you want if the current month is jan.
I have put it as 1st jan till current date.
Modify it if you need.
Regards,
Mansi

Bex Exit variable with workbook

Hi experts,
I've defined a query that uses an exit variable which select a specific range of customers.
When I execute the query the variable is populated with correct values.
Then I saved this query as workbook; but when I execute the workbook, the selection is not taken into account; it's as the exit is ignored.
When executing the workbook I 've got an information message as follow:
"The Can be changed in query navigation property has been set for variable VACLCONSID, characteristic 0BILLTOPRTY. However, the variable is used in the query in such a way, that the system is unable to apply this change-option"
But in my query definition for VACLCONSID, flag "can be changed in query navigation" is't checked.
Moreover I can't debug exit ZXRSRU01 with a workbook.
Any ideas
Thanks in advance
Thierry

Hi Radha,
thanks for your reply.
My exit variable depends on a customer variable which is filled during variables screen processing
User selects a period, and exit defines customers selection with this information
I use i_step= 2 in exit ZXRSRU01
No other parameters are filled in the workbook by user
Regards
Thierry

Exit variable with $

Hi,
What is the meaning of aexit variable with a $ sign in front ot it?
Thanks

hi Will,
i think you mean authorization variable via user exit
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1b439590-0201-0010-ea8e-cba686f21f06
hope this helps.

Customer exit variable with exclusion

Hello all, anyone know why a customer exit variable cannot exclude values ?
I've tried with multiple, single and interval without success (it give me a generic error in the customer exit for my variable).
Only the "selection option" mode seems to be enabled to exclude values (also in debug mode with rsrt transaction).
Unfortunately, I cannot use selection option (because this exclusion is an integration of pre-existence selection on a complex structure).
We have SAP BW 3.1C, with SP16. I've looked for sap notes but nothing about this problem (may be a limit).

Now I post my code. The variable is a "Multiple Single Values", optional, not "Ready for Input".
This is my code.
DATA: L_S_RANGE TYPE RSR_S_RANGESID.
If I_STEP = 2.
 CASE I_VNAM.
 WHEN 'ZXXXXX'.
 clear l_s_range.
 l_s_range-sign = 'E'.
 l_s_range-opt = 'EQ'.
 l_s_range-low = 'xxxxxxx'.
 append l_s_range to e_t_range.
 ENDCASE.
ENDIF.
The query raise an error (generic error on customer exit).
I've debugged the code. Error has raised from plausibility_check on RRS_VAR_VALUES_EXIT_AFTER. The following is the code that raise the error.
 CASE i_vparsel.
 WHEN rro04_c_vparsel-param
 OR rro04_c_vparsel-multiple
 OR rro04_c_vparsel-table.
 IF <l_s_range>-sign <> rs_c_range_sign-including
 OR <l_s_range>-opt <> rs_c_range_opt-equal.
 PERFORM raise USING rs_c_false g_c_ue_invalid_range
 i_vnam space space space.
 ENDIF.
From this code, it seems that with multiple selection we only have sign including and option equal.
What do you think about ?

Exit variable with multiple values or with ranges

Dear Experts,
I have a date exit variable used in a planning level. If the variable has a single value, I am able to execute the planning function. But if the exit is populated with a range or multiple single values, I am unable to execute the planning function. I get this message 'Variable "ZXPRDATE" is not restricted to a single value'.
I should be able to read all records from the cube in date range of one week for repost. Please advice if this is possible.
Thanks,
Gnana

Hi Mayank,
Yes, I am using the same variable for repost function also.
Let me explain in detial.
Req: I have a planning level with product, effective date and count(keyfigure). I want all products that has a count keyfigure value for the last one week.
If my effective date is a single value, I get all the list of products on that particular day. But, if my effective date has multiple dates or a date range, nothing is read from the data base.
Please advice.
Thanks,
Gnana

Subject: Where are SAP Exit Variables and how to use them in Bex Query

I have seen references to variables: 0cyear (Current Year), 0CALYEAR (current year), oCALMONTH (Current month/year).
Under 0CALMONTH characteristic or 0CALYEAR I do not see any of the variables, so how does
one use these variable in the query. For example I want to create a restricted key figure: Duration restricted by Current calendar year (e.g. 2009 if I am in 2009, 2010 if I am in 2010..).

Thanks a lot. Actally, I was looking in my production system and under varaiables I did not find any SAP Exit variables,
but in development envrionment I do see some.
Why will it not show me these variables in production? Is it because:
1. Some special premssion is required to view this type of variable
or
2. THese varaiables were not installed from Business Content
It is hard for me to beleive, it is permission issue.

Execute query with drill down using abap

Hello together,
I need to execute a query using abap and I need the result of the drill down on one characteristic in the query.
I try to use RRX_GRID_CMD_PROCESS to execute query, but I don't understand how to do the drill down.
I thought I have to specify somehow the name of the object on which I need to make the drill down. I tried to send this as a parameter to e_t_drill... but this is not working. I have also seen that
e_t_drill[] = g_sx_buffer-r_request->n_sx_request-drill, but this is empty.
Could you, please explain how to do this?
Thank you,
Iuliana

Our RKF def is as follows:
Keyfigure: 0deb_cre_lc
Chars:
Posting Keys: 01,02,11,12
Year start date: Restricting it with a variable created on it. Variable is of type Customer exit.This variable
gets value from key date which is entered by user dynamically.
Specified the offsets of Yr start date as 0 to 365.
Regards,
smitha.

Problem with interactive forms using ABAP

Hi all,
 I am trying to create an interactive adobe form using ABAP in ECC 6.0. But while execute the form, it is creating an error saying that
Exception SYSTEM_ERROR
Message ID: FPRUNX Message number: 001
Message:
ADS: The render error log file has been written to D:\u(200101)
But i was able to create adobe interactive form using WebDynpro and its working perfectly. But the problem is while using ABAP method.
Do anyone have an idea why its happening?
Thanks and Regards,
Raja Sekhar

Hi
Interactive Forms based on Adobe software is SAP's new solution for forms development. Its first release has the focus on interactive use of forms. High-volume printing is supported in principle, but - being a new solution - the performance has not yet reached the same level as Smart Forms or SAPscript, two established solutions that had years to grow. Interactive Forms is the only solution that will continue to be enhanced with new features, while SAPscript and Smart Forms will be supported without limitations.
When (or if) to move to Interactive Forms depends on your requirements. For interactive forms usage, i.e. the new functions, you have no choice, as the existing solutions don't support it. High-volume print scenarios need to be carefully analyzed to see whether your concrete requirements can be met at this point.
However, it is possible to move to Smart Forms and design your forms in such a way that a migration at any point in the future would be but a small step. Smart Forms offers from Web AS 6.40 a migration wizard to Interactive Forms. Technically, everything can be migrated, but we recommend against things like ABAP program nodes, for example.
You are not forced to ever go to Interactive Forms if you don't want to. It really depends on whether your client needs any of the new features in Interactive Forms. Also, if they are currently working with JetForms, they could enquire with Adobe directly what migration path they offer to the joint solution.
It is impossible to make a blanket statement on what needs to be done in each of the applications using a form for output. Despite the same underlying technology, forms handling has always been a decision for each SAP application: Some do it through customizing, some through coding, some in yet anither way.
What I CAN say from a technology pespective is that all applications are in the process of creating their forms based on Interactive Forms so that by 2007 pretty much all SAP forms will be PDF-based. Obviously, each application does it within the framework of their application - but they all use Interactive Forms.
By the way, be aware that in ERP 2004 this forms solution is subject to a limitation for high-volume printing scenarios as we cannot ensure that ALL customers will be content with the performance in ALL scenarios with this release. (see SAP Note 863893).
To get an overview idea about Adobe forms ,
Using SFP , first you need to create a interface . in interface you can declare the import and export parameters and also the declaration part, coding etc : This is nothing but similar to Function module interface.
And now we have to create the Form which is interactive. Create the form and enter the interface name which you have created in first step, so that the parameters , declarations of fields etc : will be copied and available in the form layout. So that you can drag and drop these declared fields ( dclared fields of interface ) to the layout.
Create the context and layout in the form.
The layout generated can be previewed and saved as PDF output.
Now we need to integrate the driver program and the PDF form to get the final output as per the requirement.
On activating and executing the form you will get a function module name just similar to smartforms.
The driver program needs to call this FM.
Refer to the below sample code :
DATA : is_customer TYPE scustom.
DATA : it_bookings TYPE ty_bookings.
DATA : iv_image_url TYPE string.
DATA : iv_sending_country TYPE adrc-country.
DATA : it_sums TYPE TABLE OF flprice_t.
DATA : docparams TYPE sfpdocparams.
DATA : formoutput TYPE fpformoutput.
DATA : outputparams TYPE sfpoutputparams.
PARAMETERS : pa_cusid TYPE scustom-id.
SELECT SINGLE * FROM scustom INTO is_customer
WHERE id = pa_cusid.
SELECT * FROM sbook
INTO CORRESPONDING FIELDS OF TABLE it_bookings
WHERE customid = pa_cusid.
outputparams-nodialog = 'X'.
outputparams-getpdf = 'X'.
*outputparams-adstrlevel = '02'.
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
ie_outputparams = outputparams
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
docparams-langu = 'E'.
docparams-country = 'US'.
docparams-fillable = 'X'.
CALL FUNCTION '/1BCDWB/SM00000043'
EXPORTING
/1bcdwb/docparams = docparams
is_customer = is_customer
it_bookings = it_bookings
IV_IMAGE_URL =
iv_sending_country = 'US'
IT_SUMS =
IMPORTING
/1bcdwb/formoutput = formoutput
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'FP_JOB_CLOSE'
IMPORTING
E_RESULT =
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
http://help.sap.com/saphelp_nw04/helpdata/en/d2/4a94696de6429cada345c12098b009/frameset.htm
https://www.sdn.sap.com/irj/sdn/interactiveforms-elearning
/people/thomas.jung3/blog/2005/07/13/lessons-learned-from-adobe-forms-development
/people/community.user/blog/2006/11/20/search-help-in-isr-adobe-forms
/people/franklin.herbas/blog/2005/12/13/2d-barcode-pdf-forms-with-sap-netweaver
/people/vani.krishnamoorthy/blog/2006/05/17/fillable-adobe-forms-using-abap
http://help.sap.com/saphelp_nw04s/helpdata/en/43/849b3482206353e10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/43/82538c0c4458bbe10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/46/55c841d202c317e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/6d/bd2d828aa04eeb9451aad0d02ae9a0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dd/60694fddb74ad88cdb7d2a094f3dd2/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d4fe7fca-0b01-0010-569a-9a9c1ddf4132
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/vani.krishnamoorthy/blog/2006/05/17/fillable-adobe-forms-using-abap
https://www.sdn.sap.com/irj/sdn/interactiveforms
http://www.sap.com/company/press/press.epx?pressID=2785
http://www.adobe.com/enterprise/partners/sap.html
http://www.adobe.com/enterprise/partners/pdfs/sap_datasheet.pdf
look at the Adobe page here in SDN:
https://www.sdn.sap.com/sdn/developerareas/was.sdn?page=AdobeForms.htm
Check these links on Adobe forms
http://help.sap.com/saphelp_nw04/helpdata/en/1e/05853ff8ec2c17e10000000a114084/content.htm
https://www.sdn.sap.com/irj/sdn/interactiveforms
http://www.sap.com/solutions/solutionextensions/pdf/BWP_Interactive_Forms_Adobe.pdf
It contains lots of useful information, documentation, and e-learning materials teaching you the basics.
http://help.sap.com/saphelp_nw2004s/helpdata/en/b7/64348655fb46149098d95bdca103d0/frameset.htm
Use the Tcode : SFP
https://www.sdn.sap.com/sdn/developerareas/was.sdn?page=AdobeForms.htm
Check these links on Adobe forms
http://help.sap.com/saphelp_nw04/helpdata/en/1e/05853ff8ec2c17e10000000a114084/content.htm
https://www.sdn.sap.com/irj/sdn/interactiveforms
http://www.sap.com/solutions/solutionextensions/pdf/BWP_Interactive_Forms_Adobe.pdf
It contains lots of useful information, documentation, and e-learning materials teaching you the basics.
http://help.sap.com/saphelp_nw2004s/helpdata/en/b7/64348655fb46149098d95bdca103d0/frameset.htm
Very useful
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/00f4f594-7306-2a10-8483-b45bec157093 [original link is broken]
for PDF forms
http://help.sap.com/saphelp_nw04/helpdata/en/c8/4adf7ba13c4ac1b4600d4df15f8b84/content.htm
See the links for debugging
Refer to this thread
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
Debugging
Check these documents.
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_nw04/helpdata/en/5a/4ed93f130f9215e10000000a155106/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/84/1f624f4505144199e3d570cf7a9225/frameset.htm
http://help.sap.com/saphelp_bw30b/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
ABAP Debugging
http://www.saplinks.net/index.php?option=com_content&task=view&id=24&Itemid=34
Look at the SAP help link below
http://help.sap.com/saphelp_nw2004s/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
For online PDF form creation...........
https://createpdf.adobe.com/index.pl?BP=IE&LOC=en_US
for Other information use these Links
C:Documents and Settingsvuser01DesktopSANKET SPersonalVikalpsap netweaver ABAP and adobe Formspdf form webpdf based print forms.htm
C:Documents and Settingsvuser01DesktopSANKET SPersonalVikalpsap netweaver ABAP and adobe Formspdf form webSAP Interactive Forms by Adobe.htm
http://searchsap.techtarget.com/generic/0,295582,sid21_gci1079310,00.html?Offer=SAPwn927nw
http://www.thespot4sap.com/articles/SAP_Netweaver_Introduction.asp
http://help.sap.com/saphelp_webas630/helpdata/en/cb/f4bc3d42f46c33e10000000a11405a/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c7cbe08d-0c01-0010-8bac-b9ce7348246c?source=gawindev09&kw=sap+netweaver&adgroup=brand_netweaver
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6
https://websmp204.sap-ag.de/~sapidp/011000358700004952682004E
/people/venkata.ramisetti/blog/2006/09/21/configuring-output-types-for-pdf-based-print-forms
http://help.sap.com/saphelp_erp2005vp/helpdata/en/96/6ee0d5b39640d68fc0078fc575114a/frameset.htm
D:adobe livecycle designerAdobe_Designer_71BeforeInstall.htm
http://sdn.sap.com/irj/sdn/interactiveforms
very imp ADS configuration guide
http://help.sap.com/saphelp_nw2004s/helpdata/en/95/5a08cd0e274a0bae559622d6670722/frameset.htm
Could anyone provide the complete manual of SAP Query Creation
Tcode is : SFP
chk these links:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d4fe7fca-0b01-0010-569a-9a9c1ddf4132
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/vani.krishnamoorthy/blog/2006/05/17/fillable-adobe-forms-using-abap
see these links..
https://www.sdn.sap.com/irj/sdn/interactiveforms-elearning
/people/thomas.jung3/blog/2005/07/13/lessons-learned-from-adobe-forms-development
/people/community.user/blog/2006/11/20/search-help-in-isr-adobe-forms
/people/franklin.herbas/blog/2005/12/13/2d-barcode-pdf-forms-with-sap-netweaver
/people/vani.krishnamoorthy/blog/2006/05/17/fillable-adobe-forms-using-abap
http://help.sap.com/saphelp_nw04s/helpdata/en/43/849b3482206353e10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/43/82538c0c4458bbe10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/46/55c841d202c317e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/6d/bd2d828aa04eeb9451aad0d02ae9a0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dd/60694fddb74ad88cdb7d2a094f3dd2/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d4fe7fca-0b01-0010-569a-9a9c1ddf4132
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
/people/vani.krishnamoorthy/blog/2006/05/17/fillable-adobe-forms-using-abap
https://www.sdn.sap.com/irj/sdn/interactiveforms
http://www.sap.com/company/press/press.epx?pressID=2785
http://www.adobe.com/enterprise/partners/sap.html
http://www.adobe.com/enterprise/partners/pdfs/sap_datasheet.pdf

Issue with FM 'STATUS_CHANGE_EXTERN' using ABAP Proxy

Hi Experts,
I am using the FM 'STATUS_CHANGE_EXTERN'   & 'STATUS_CHANGE_INTERN' to change the user status & system status using ABAP Proxy.
But SAP is updating the system status using ABAP Proxy through ''STATUS_CHANGE_INTERN'' but not updating the User stauts 'STATUS_CHANGE_EXTERN' using ABAP Proxy but when run the same in foreground then it's working fine..
I have already used the External Commit for the same.
Please help me in this case.
Thanks in Advance
Sachin

After call of CRM_STATUS_CHANGE_EXTERN you need to call BAPI_TRANSACTION_COMMIT.
call function 'CRM_STATUS_CHANGE_EXTERN'
    exporting
        objnr               = iv_guid
        user_status         = iv_status
    exceptions
        OBJECT_NOT_FOUND    = 1
        STATUS_INCONSISTENT = 2
        STATUS_NOT_ALLOWED = 3
        OTHERS              = 4
if ( sy-subrc = 0 ).
    call function 'BAPI_TRANSACTION_COMMIT'
        exporting
            wait = ABAP_TRUE
else.
    "!+ Handle error
endif.
Best regards,
Tomas.

Displaying Customer Exit Variable with derived value from another ODS

Hi All,
Sorry if this question has been answered before. I searched the forums and could not find anything specific to my problem.
I am new to BEx Query. Customer is requesting a variable(s) be created which will be displayed as a column along with other CKF and RKF. This query is a payroll query for US/Canada. This new variable will be based on the user input date for the query. We are to take this date and go look up the actual pay date for the pay period to which the user input date belongs. The pay date is stored in another ODS.
So far, as far as the changes to the Customer Exit ZXRSRU01 are concerned, I would perform the logic when I_STEP = 2. Do a basic selection off the second ODS, derive the pay date, and store in range table E_T_Range.
The data displayed off the user input date is displayed in rows. This is done six times, going back seven days for each row (first row is data for period user entered date to user entered date - 7 days; second row is data for period user entered date - 7 days to user entered date - 14 days; etc ...). For this to happen correctly, I am assuming the variable(s) are to to have characteristic types 'Not ready for input', 'Mandatory', 'Customer Exit', and 'Single Value'.
My question is ... How do I display the six variables in columns (how are they to be defined in the query) and the characteristics I list above, are they correct? Does this need to be a replacement path variable?
Thanks.
Edited by: Amir Hasan on Jun 11, 2009 6:24 PM
Edited by: Amir Hasan on Jun 11, 2009 6:25 PM

Hi Amir,
What i can understand from u r requirement is you want to few columns that will show something like below,
User entered date = x
Period of X to Period of (X-7) Period of X to Period of (X-14).....
This can be done by CMOD for variable only.
Logic steps :
1) Take the user input.
2) Find out the period by using T009B table and store in temp variable.
3) Do day -7 and find out period for the same
4) Assing period of X to ls_range-high range and X-7 to ls_range-low.
Let me know if you have any doubt
Regards,
Viren

Problem activating the back and exit button with the ALV using OO

I have wrote my first alv using Methods.My problem is that i can't activete the BACK and EXIT button in the standart toolbar .
Look my code please .....
Without PF-STATUS can i do it ?
*& Report YDP_DOUBLE_ALV
REPORT YDP_DOUBLE_ALV.
TABLES : YQM_CERT , MARA , YOUTPUT_APPL.
DATA : ALV_GRID TYPE REF TO CL_GUI_ALV_GRID,
 CUSTOM_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
 FIELD_CAT TYPE LVC_T_FCAT,
 LAYOUT TYPE LVC_S_LAYO.
DATA : ALV_GRID2 TYPE REF TO CL_GUI_ALV_GRID,
 CUSTOM_CONTAINER2 TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
* FIELD_CAT TYPE LVC_T_FCAT,
* LAYOUT TYPE LVC_S_LAYO.
DATA: DYNNR TYPE SY-DYNNR,
 REPID TYPE SY-REPID.
DATA: OK_CODE TYPE SY-UCOMM.
DATA : BEGIN OF ITAB OCCURS 0.
 INCLUDE STRUCTURE YQM_CERT.
DATA END OF ITAB.
DATA : BEGIN OF ITAB1 OCCURS 0.
 INCLUDE STRUCTURE YOUTPUT_APPL.
DATA END OF ITAB1.
* MODULE DISPLAY_ALV OUTPUT
MODULE DISPLAY_ALV OUTPUT.
SET PF-STATUS 'ZST9'.
PERFORM DISPLAY_ALV.
ENDMODULE. "DISPLAY_ALV OUTPUT
 "DISPLAY_ALV OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE USER_COMMAND_0100 INPUT.
CASE OK_CODE.
 WHEN 'BACK'.
 LEAVE TO SCREEN 0.
 WHEN 'EXIT'.
 LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
START-OF-SELECTION.
LAYOUT-ZEBRA = 'X'.
LAYOUT-GRID_TITLE = 'YQM_CERT'.
LAYOUT-CWIDTH_OPT = 'X'.
LAYOUT-SMALLTITLE = 'X'.
SELECT * FROM YQM_CERT INTO ITAB.
 APPEND ITAB.
ENDSELECT.
SELECT * FROM YOUTPUT_APPL INTO ITAB1.
 APPEND ITAB1.
ENDSELECT.
CALL SCREEN 100.
END-OF-SELECTION.
*& Form DISPLAY_ALV
* text
FORM DISPLAY_ALV.
IF ALV_GRID IS INITIAL.
 CREATE OBJECT CUSTOM_CONTAINER
 EXPORTING
* PARENT =
 CONTAINER_NAME = 'CC_ALV'
* style =
* LIFETIME = lifetime_default
 REPID = REPID
 DYNNR = DYNNR
* NO_AUTODEF_PROGID_DYNNR =
* EXCEPTIONS
* CNTL_ERROR = 1
* CNTL_SYSTEM_ERROR = 2
* CREATE_ERROR = 3
* LIFETIME_ERROR = 4
* LIFETIME_DYNPRO_DYNPRO_LINK = 5
* others = 6
 IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 CREATE OBJECT ALV_GRID
 EXPORTING
* I_SHELLSTYLE = 0
* I_LIFETIME =
 I_PARENT = CUSTOM_CONTAINER
* I_APPL_EVENTS = space
* I_PARENTDBG =
* I_APPLOGPARENT =
* I_GRAPHICSPARENT =
* I_NAME =
* I_FCAT_COMPLETE = SPACE
* EXCEPTIONS
* ERROR_CNTL_CREATE = 1
* ERROR_CNTL_INIT = 2
* ERROR_CNTL_LINK = 3
* ERROR_DP_CREATE = 4
* others = 5
 IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 CALL METHOD ALV_GRID->SET_TABLE_FOR_FIRST_DISPLAY
 EXPORTING
* I_BUFFER_ACTIVE =
* I_BYPASSING_BUFFER =
* I_CONSISTENCY_CHECK =
 I_STRUCTURE_NAME = 'YQM_CERT'
* IS_VARIANT =
* I_SAVE =
* I_DEFAULT = 'X'
 IS_LAYOUT = LAYOUT
* IS_PRINT =
* IT_SPECIAL_GROUPS =
* IT_TOOLBAR_EXCLUDING =
* IT_HYPERLINK =
* IT_ALV_GRAPHICS =
* IT_EXCEPT_QINFO =
* IR_SALV_ADAPTER =
 CHANGING
 IT_OUTTAB = ITAB[]
* IT_FIELDCATALOG =
* IT_SORT =
* IT_FILTER =
* EXCEPTIONS
* INVALID_PARAMETER_COMBINATION = 1
* PROGRAM_ERROR = 2
* TOO_MANY_LINES = 3
* others = 4
 IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
ELSE.
 CALL METHOD ALV_GRID->REFRESH_TABLE_DISPLAY
* EXPORTING
* IS_STABLE =
* I_SOFT_REFRESH =
* EXCEPTIONS
* FINISHED = 1
* others = 2
 IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
ENDIF.
ENDFORM. "DISPLAY_ALV

Hi
U need to active them in your status ZST9.
Max

Assign Authorization Using ABAP

I create one zprogram2 , but user not having a authorization to use , but that program is not used by user directly , means that zprogram2 is call by another zprogram1 , So I need to give authorization in the zprogram1 to use zprogram2
Is it any function module to give authorization at run time .

Hello Siva,
You would be having a transaction code assigned to program2. Do a authority check on that transaction before submitting program2 inside program1.
ex: program2 is assigned to transaction code TCODE2.
Inside program1 do like below.
AUTHORITY-CHECK OBJECT 'S_TCODE'
ID 'TCD' FIELD 'TCODE2'.
IF sy-subrc <> 0.
MESSAGE <No authority to transaction>
ENDIF.
SUBMIT program2.......
Regards,
TP

Excel download with multiple worksheets using ABAP webdynpro

Content of Internal table should to downloaded to an excel sheet with multiple worksheet.

Excel doesn't support multiple worksheets with the text tab delimited or any of the other plain text formats. So if you need multiple worksheets those approaches are out. Multiple worksheets would only work with the Excel native format or the XML based format. From ABAP the best approach would be to create the XML Excel format. Search the forms and wiki has there has been tons of discussion in the mast on the XML Excel format.

Populate user exit Variable with User Authorizations using ABAP?

Similar Messages

Maybe you are looking for