Populating Batch Characteristics values in MIGO

Dear All,
I have a requirement to populate MIGO Quantity in one of the Characteristic of the batch. If this is not possible then i need to check whethere that characteristic value and MIGO Quantity for Each item are same or not ....
I have got certain exit EXIT_SAPMM07M_004...But this exit is not getting called .. I have put break point and checked but not working.
Can you please help me out in this exit or if you have any other place where i can put my checks.
Regards
Bhavin

Hello,
You can try with the following BADIs.
These may be helpful for your requirement.
MB_QUAN_CHECK_BADI
MB_CHECK_LINE_BADI
MB_STOR_LOC_BADI_GTS
DERIVATION
Regards
Arindam

Similar Messages

Copying Batch Characteristics Value from Standard SAP Table Field

Dear Experts,
1. While creating a user-defined Batch Characteristics 'CREATED_BY' using ct04, on the Additional Data tab, I filled the following fields as follows: Table Name = MCHA, Field Name =ERNAM.
'CREATED_BY' was then assigned to a batch Class TRIMMED (of class type 022).
TRIMMED was assigned to a batch managed material ADE245DD.
After posting co15 (confirmation of production order) for material ADE245DD, the value in table MCHA & field ERNAM is automatically copied into the Batch Characteristics value field of u2018CREATED_BYu2019 for the generated batch.
2. But I am unable to achieve the same result when I create another Batch Characteristic with similar settings in the Additional Data tab as follows: Table Name = MARC, Field Name = DISPO.
After doing co15, the value stored in table MARC and field DISPO does not get copied into the Batch Characteristics value.
Please what do I need to do in Scenario 2 above to achieve the same result as in Scenario1?
Regards

Hi,
Table and field used in additional data table should be related to the object than only it will work, for e.g. MCHA and ERDAT will work if you create a characteristcis and assign it to class type Batch (022/023) because MCHA table has Batch no. as primary key,
this implies for using material specific table e.g. MARA , you should use characteristics with class type 001 (Material class) , try using with table MARC also
Cheers
Dheeraj

Batch Characteristics value in report

I want to develop a custom report where material master batch characteristics value should be displayed.
The report will display based on Process order No. In Process order AFPO table I am bringing MATNR, CHARG, WERKS information.
Now, the MATNR is maintained with a batch classification of class type 001 (material class) one characteristic "Z_NUMERIC" and value is maintained as "22345".
Now, in custom report I have to bring the 22345 no. In which Table I can get the information for material for 001 class type characteristics value?
Please repond.

You can find it in table ausp
Regards,
Dhaval

Batch Characteristics update using MIGO

Hello Gurus - Need your valuable suggestions on the issue below.
I have a requirement to update only certain batch characteristics at the time of goods receipt using MIGO by clicking on the classification view. Users should have access to update only 4 out of 10 characteristics in a batch. I did assign authorization group to the characteristics & made the changes to the roles but i think that there is no auth. check performed for classification during goods receipt. Please let me know the possible options to fulfill this requirement.
Thanks for your time.

Thanks for your reply Craig. I did set up the characteristic as 'Entry Required' & changed the config to update only required charac. in foreground. When i posted the GR, system did not give me any pop-up to update the characteristics but i got a warning message saying that the values are missing in classification. So i went to classification view but none of the required characteristics are highlighted. So how will the user know which characteristics are required?
Also to let you know, we are updating certain characteristics in the background using enhancement. Do you think will there be any conflict with this?
Thanks for your help.

Copy of Batch characteristics value from material master to Batch

Hi Gurus,
I have maintained some values in the characteristics under batch classification in material master and want to copy the values in batch characteristics during batch creation at process order release.
Can any one help me to achieve this in standard way?
Thanks
Sandip

Hi,
Try to understand the batch classification functionality...In batch classification characteristic values changes from batch to batch...Values should not be maintained in the material master...it does not have any meaning...in the material master we need to assign only the batch class with class type 023 in classification view ...no need to assign the values there....Batch classification means characteristics values differs from batch to batch...
Thanks
Kumar

Modifying batch characteristics value

Dear Experts,
We have created batch characteristics named 'POTENCY','LOD','ASSAY'.
Now the value of POTENCY is calculated based on the formula, that is LOD * ASSAY. There are chances that the value is sometimes calculated more than 100%. Now I want to put a restriction that if the value increases more than 100 than the value of POTENCY should be automatically be 100.
What should I do to resolve this issue.
NOTE - POINTS WILL BE REWARDED.......

Hello,
You can write a specific FM called by the configurator (procedure which call a user FM). Input are your LOD andd ASSAY, output is POTENCY. Inside you can write your formula.
Parameters are given by std tables.
This is sample :
FUNCTION zsca_calcul.
*" IMPORTING
*"     VALUE(GLOBALS) TYPE CUOV_00
*" TABLES
*"      MATCH STRUCTURE CUOV_01
*"      QUERY STRUCTURE CUOV_01
*" EXCEPTIONS
*"      FAIL
*"      INTERNAL_ERROR
DATA : w_met_cmin_r LIKE cuov_01-atflv.
CLEAR : w_matnr_paracheve, w_instance .
BREAK-POINT.
lecture des données en entrée dans la table query
LOOP AT query WHERE atcio = 'I'.   "input parameter
vérification type num
    IF query-atfor NE 'CHAR'.
     MESSAGE ID 'ZSCA_CONFIGURATEUR' TYPE 'W' NUMBER '000' RAISING fail
    ENDIF.
    CASE query-varnam.
      WHEN 'MET_NUMART_MLAZ'. ' my single input characteristic
        w_matnr_paracheve = query-atwrt.
        PERFORM lire_mara. ' process the input parameter
        PERFORM lire_carac.
      WHEN OTHERS..
     MESSAGE ID 'ZSCA_CONFIGURATEUR' TYPE 'W' NUMBER '000' RAISING fail.
    ENDCASE.
ENDLOOP.
update of the output characteristic MET_CODEMAT (it is numeric and contains value 9
READ TABLE query WITH KEY varnam = 'MET_CODEMAT'.
match = query.
match-atfor = 'NUM'.
match-atflv = 9.
APPEND match.
ENDFUNCTION.
Regards.

Same Batch Number with different characteristics value

Dear Gurus,
I have the following scenerio:
The finished goods should be maintain in batch with external number and at the time of confirming the finished goods in co11n the client want to capture the finished goods value like length, width and diameter.
So we propose the batch characteristics with class type of 022 for finished good and we maintain the character as length, width and diameter under the batch class 022 and assign the batch class in finished good classification view.
Now the requirement is we want to capture the batch characteristics value length width and diameter with same batch number for multiple confirmation.
Example:
Confirmation      Batch number               batch Class               Length     width     Diameter
1                        1000                              022                              100        50             20
2                        1000                              022                              120        25             10
3                        1000                              022                              150        70             30
Now at present we are trying to capture the batch characteristics with same batch number but our standard system will not allow to maintain the different batch characteristics value under same batch number. If we overrite the batch characteristics in msc2n transaction the last value maintained be copied to all batch number. but we want same batch number with different batch characteristics value.
Please share your idea and try to solve..
Regards,
Vimal

Dear Vimal,
It is not possible to maintain multiple batch characteristics in one batch.
Work around is to create original batches and assign to your production order. During CO11N, generate one batch per confirmation. There is a report in batch information cockpit to link between original batch and batch per confirmation.
Rgrds,

From which table characteristics value is been picked in Batch(023 class)

Hi gurus,
Could anyone helpme out of this problem
While creating migo ,batch no gets automatically assigned for the material when I click on the check button and then clicking the classification screen , characteristics value have to be given manually for the material that is to be receipt in migo.
Now My problem is I am creating a report where the material no along with the batch no and the characteristics value of the batch is required , but I cannot get the table name
I have tried with mcha,mch2,mch1 but here no characteristics value could be derived ,Table Cawn,cabn is there but how to link with other tables like mseg or MKPF.
In table AUSP characteristics value is picking but same problem how to link it with mseg or mkpf etc.
Guys please help me out of this.
Thanks N regrds,
Siddhrtha

Hi
CABN Characteristics ( o.a. batch/vendor)
CABNT Characteristics description
CAWN Characteristics ( o.a. material)
CAWNT Characteristics description
AUSP Characteristic Values
Class types and objects :TCLAO Several class types for object
TCLA Class types ( vb. lfa1 => v10 en 010)
TCLAT Class type text
TCLT Classifiable objects
TCLC Classification status
Regards

From which table characteristics value of Batch management is been picked

Hi gurus,
Could anyone helpme out of this problem
While creating migo ,batch no gets automatically assigned for the material when I click on the check button and then clicking the classification button , there characteristics value have to be given manually for the material that is to be receipt in migo.
Now My problem is I am creating a report where the material no along with the batch no and the characteristics value of the batch is required , but I cannot get the table name
I have tried with mcha,mch2,mch1 but here no characteristics value could be derived ,Table Cawn,cabn is there but how to link with other tables like mseg or MKPF.
In table AUSP characteristics value is picking but same problem how to link it with mseg or mkpf etc.
Guys please help me out of this.
Thanks N regrds,
Siddhrtha

Hi Merwyn,
I cannot find any common field between AUSP and MCH1 ,could you tell me the procedure to link these 2 tables.
Thanks N Regards
Siddhartha Chatterjee
Hi,
Using AUSP table pick the object No. and link it with MCH1 to find the Batch No.
using the batch No. link to MSEG-CHARG

MIGO : Error when copying batch characteristics

Hi,
I've some problem on MIGO Tcode when i want to copy the batch characteristics.
I work with class type 022.
I create a GR from PO. (movement 101). My item line contained sub-items (with BOM). So i would like to copy the batch characteristics in reference of component batch values.
I've implemented the UE "EXIT_SAPMM07M_004".
Case 1 : In this UE, i fill a standard internal table (named VALUES) with the characteristics names and values i want to resume.
and i use the FM 'CLFM_OBJECT_CLASSIFICATION' with the father and the son batch information in UE, i go to MSC3n and all characteristics are copied (even those unwanted). But when i go to MCS2N, i retrieve the expected values.
Case 2 : Only use the internal table, but some characteristics are not maintained.
Case 3 : Only use the FM, but no characteristics are reversed.
Does anyone could help me ?
Thanks in advance
Best regards.

Hi,
Table and field used in additional data table should be related to the object than only it will work, for e.g. MCHA and ERDAT will work if you create a characteristcis and assign it to class type Batch (022/023) because MCHA table has Batch no. as primary key,
this implies for using material specific table e.g. MARA , you should use characteristics with class type 001 (Material class) , try using with table MARC also
Cheers
Dheeraj

Tranfering data from MIGO to Batch Characteristics

Hi,
Please let me know the procedure to tranfer the MIGO Field values to Batch Characteristics. Example Manufacturer name maintained manually in BADI field is required to tranfer to Batch Characteristics.
Regards
Mohan

Dear,
You can use the CACL_VALUE_CHANGE badi
BAPI_CHARACT_CHANGE may its help full to u.
SAPNote 519303 - FAQ: Goods movement with Transaction MIGO
explains that the user has to activly click the classification button in the batch tab.
Please refer this laos,
https://sapmats-de.sap-ag.de/download/download.cgi?id=B7BKFOTZKKGJ73YA86VZISCMALG8DTQRTX1YX02892OT1D308Z
Regards,
R.Brahmankar

Batch characteristic value not populated!

Hello guys,
please would appreciate advice to following:
I created two reference chars z_goods_receipt (MCH1-LWEDT) and z_created_on (MCH1-ERSDA). Chars assigned to material batch class. During GR in Classification Dates (chars values) are visible, but after GR is saved, in batch chars values are not populated.
Consequently, I can not use these chars in sorting criterium for delivery batch determination - batches are not sorted acocrding to dates.
Batches on material level. In Customizing (Classify batches within goods mvt), for mvt 101 setting is 4 (Classification always in foreground (all batches)) - but bug remains even if i try with other options. Check with developer shows not much help from EXIT_SAPMM07M_004 or EXIT_SAPMM07M_004 or EXIT_SAPLV01Z_012.
Any idea how to populate these chars in batch?
Alternatively, what else I could use in order to enable FIFO batch determination for batches in delivery?
Thanks for prompt replies!
Br, Jan

Hello,
SAP reply -standard behaviour. After save in MSC2n values read from MCH1, after that in MSC3N value read from AUSP.
Issue solved using non reference charactereristic and adding code into ZXMBCU04.
Br, Jan

Assigning of characteristics value for a batch

Hi All,
Please help regarding the assigning of characteristics value for a batch in transaction code MSC2N or MSC2 in the classification tab.
If Function modules or BAPI is available pls advise the inputs to be provided for the function modules.
Here is one function module which i searched, but if i run this function module, i am not able to commit my characteristics value.
The function module is CIF_BATCHCHAR_MAP.
For the above function module the inputs which i have given are...
Material number
Batch
Plant
Class type
Class Number
Characteristics name
Characteristics value
Expecting your earliest reply.
Thanks,
G.C.Arravind Kumar Vikram

Try the code below
*.1 create key
it_objects-key_field = 'MATNR'.
it_objects-value_int = matnr.
APPEND it_objects.
it_objects-key_field = 'CHARG'.
it_objects-value_int = charge.
APPEND it_objects.
CLEAR l_objectkey.
CALL FUNCTION 'BAPI_OBJCL_CONCATENATEKEY'
    EXPORTING
      objecttable    = 'MCH1'
    IMPORTING
      objectkey_conc = l_objectkey
    TABLES
      objectkeytable = it_objects
      return         = it_return2.
2 fill it_num it_char it_curr with values
3 change characteristics
CALL FUNCTION 'BAPI_OBJCL_CHANGE'
    EXPORTING
      objectkey          = l_objectkey
      objecttable        = 'MCH1'
      classnum           = it_class-classnum
      classtype          = '023'
    TABLES
      allocvaluesnumnew = it_num
      allocvaluescharnew = it_char
      allocvaluescurrnew = it_curr
      return             = it_return.

How to show the Characteristics Values of Batch appear upon Search?

Dear all
We are implementing SAP for Wood Industry.
Facts:
1. There are 3 batches created for the raw material.
2. Each batch has the characteristics of Thickness, Width, Length with characteristics value 24mm, 140mm, 1530mm
3. 1 Production Order has been create to produce raw material (RM) to semifinised goods (SM).
Quetions:
During GI to Produciton Order using MVT 261, when we try to select batches from the Item Detail level, the pop up search windows only show us the existing 3 Batch Numbers available for the RM, it does not show the characteristics value "thickness, Width, length" that describe each batch.
And this has caused serious problem to use during their selection of batch as batch number will only make more sense to them if it is shown together with the characteristics value.
Apart of opening additional screen to show the batch information of each batch, is there any config I need to do to solve this situation?
Mark will be given handsomely.
Thanks.

Hi,
it is possible to use another search help (Tab Strip: Search for batches via classes, when you press F4 in the batch field).
Here you have to enter the class number first.
Then you get a list of all characteristics in this class, and you can narrow your selection, by setting values for specific characteristics.
After that, press F8 (Find in initial class)
You will get a list of batches, assigned to the selected class, and fullfilling your selection criteria.
Now you can display either the characteristics of a single batch, or you can define a layout for the ALV-Table control, with all characteristics, which you want to see in the overview.
Another possibility is, to open up the 'batch information cockpit' (transaction BMBC) in a separate mode. Here you can see the characteristics ( if you define a selection class on tab strip 'Characteristics' ), e.g. in combination with stock information, which might be relevant as well.
Here you can download some screenshots (link wiil be valid for 80 days)
Link: [https://sapmats-de.sap-ag.de/download/download.cgi?id=B7BKFOTZKKGJ73YA86VZISCMALG8DTQRTX1YX02892OT1D308Z]
Kind Regards
Michael Franz
IBU Mil Products & Mining
SAP AG

Batch Classification Characteristic Values in MIGO...

Hi,
Can we update Batch Classification Characteristic Values in MIGO...
Batch is also created while doing MIGO. I have no issues in creating Batch.
Thanks in advance...

Hi.
You can use the CACL_VALUE_CHANGE badi.
Regards.

Populating Batch Characteristics values in MIGO

Similar Messages

Maybe you are looking for