Populating the Signal Express Category on the Functions Palette

Hi
Can anybody help with advice on how to populate the signal express category on the block diagram Functions palette ?
Thanks
Solved!
Go to Solution.
Attachments:
LV Functions Palette.PNG ‏14 KB

Hi Ewan,
Uninstalling and reinstalling in the right order would ensure that everything was properly associated. However, I don't think that should be necessary yet in your situation. Please go to Control Panel > Programs and Features > National Instruments Software to see the full list of National Instruments software you have installed. From here you should be able to select any individual installation from the list and select "Repair". Instead of just seeing that something is already installed and exiting, this should go through the installation and check for corruption. As well, this should add the correct associations if they were currently missed due to the order of installation. 
Please try running a repair of SignalExpress 2013 and restarting your computer, then check to see if the functions palette in LabVIEW is fully populated.
Thanks!
Emily C
Applications Engineer
National Instruments

Similar Messages

  • I'd like to alter my Airport Extreme/Airport Express wireless network so that the 3 Expresses connect to the Extreme via Ethernet. I've been told this will create a more stable wifi signal. How do I configure this using Airport Utility? Thanks.

    I currently have an Airport Extreme Base Station connected to my DSL router by Ethernet. Because I have a long, sprawling home, I have 3 Airport Expresses configured to "Extend the Wireless Network" I've established. Because of my home environment--thick walls encompassaing wire mesh, sprawling rooms, etc., it is hard to maintain a continuously-strong, stable WiFi signal. I've been told that I can create a much more stable network by connecting the Express units to the AEBS via Ethernet cable. Since my home is already wired for Ethernet, I'm considering making this change. If I proceed to establish the Ethernet connections, how do I then set up Airport Utility to accomodate this switch from a Wireless-based WiFi network to an Ethernet-based WiFi network?
    Thanks in advance for any help.
    Phyllis

    I don't see anyplace in the Utility to designate HOW the Express units are connected, only how they relate on the network to the Extreme,
    As I mentioned in the previous post, when you click the Internet icon in AirPort Utility:
    Connect Using = Ethernet  (This tells each Express to connect to the Extreme using the ethernet connection)
    Connection Sharing = Off (Bridge Mode)  (This setting allows your AirPort Extreme to function as the "main" router on the network, as it must for the setup to work correctly.
    You do not need to configure anything differently on the AirPort Extreme (as long as it is working correctly now) to connect the AirPort Express devices.
    The only other question I have is the following: I'm currently already using one of the Ethernet ports on the back of the Extreme-- for my husband's iMac. I really don't think he gains much in performance over how the iMac would run through wifi, so I could disconnect the iMac. If you think the iMac would do better to stay on the Ethernet connection, should I use a switch/splitter to add an extra connection?
    Since each AirPort Express must connect using ethernet, you will need to use the 3 LAN <-> ports on the AirPort Extreme for the AirPort Express devices.
    I would suggest that you try connecting the iMac using wireless to see if that will work. If the wireless connection is not satisfactory, then you can add a 5 port ethernet switch to one of the LAN ports on the Extreme and then plug all the devices connecting using ethernet....the iMac and the 3 AirPort Express devices...into the remaining 4 ports on the switch. That will leave you with 2 open ports on the AirPort Extreme for any future devices that may need to connect.
    When you test out the system, here is a trick to find out which device your computer is actually connecting to at any given time as it "roams" around the house.
    When you have AirPort Utility open to configure each AirPort Express, jot down the AirPort ID for each Express. You can do the same for the AirPort Extreme.
    As you move around with your laptop, hold down the option key on your Mac keyboard while you click on the fan shaped AirPort icon at the top of the screen. Look for the BSSID. That is the AirPort ID of the device that the laptop is connected to at that time. it should also be the ID of the closest AirPort Express (or AirPort Extreme if the laptop is close to the Extreme at the time).
    Let us know how things are working when everything is up and running.

  • Allow users to change the Active Target Category in the POV bar

    Can't figure out where in Object Maintenace to allow user to be able to select the Active Target Category in the POV bar.

    It's not in object maintenance. You need to disable the POV Mode (Admin / POV Mode) by removing the checkbox, iwhich then means all users will have the ability to change the category (and period). I suspect in the POV it currently has GLOBAL defined ( which means it is controlled by admin users, and you need to switch it (by default) to LOCAL via the POV Mode option.

  • I just bought an AirPort express. Currently I have a qwest wired router plugged into the back of my computer via an ethernet cable. Can I just unplug the ethernet cable and plug it into the AirPort express, then use the setup utility?

    I just bought an AirPort express. Currently I have a qwest wired router plugged into the back of my computer via an ethernet cable. Can I just unplug the ethernet cable and plug it into the AirPort express, then use the setup utility? Most of the discussions involve an existing wireless network. I don't have one.

    Correct. That's the way to set up the AirPort Express. After connecting your AirPort Express to the router, open AirPort Utility (in /Applications/Utilities) and follow the steps

  • I have tryed to connect an AirPort Express to my wireless network. But I alwais get the errocode -4. Can anybody help. I have reset the AirPort Express and updated the software.

    I have tryed to connect an AirPort Express to my wireless network. But I alwais get the errocode -4. Can anybody help. I have reset the AirPort Express and updated the software.

    The ZyXEL P-2601HN-F1, as you know, is a combination DSL modem & 802.11n wireless router (or gateway device).
    For your goal you will want to take a look at this Apple Support article for details on how to configure an AX for iTunes.
    If you are still having difficulties with the AX joining the ZyXEL's wireless network, you can try the following:
    Temporarily disable wireless encryption.
    If you are hidding the SSID, disable that feature.
    Change the Mode Select setting to: 802.11g Only
    Change the Channel Selection from "Auto" to a set channel, like 1, 6, or 11

  • Thank you. Ok, that was a surprise. Thought that almost every fm-transmitter just could send the signal by air to the antenna of the car.

    Thank you.
    Ok, that was a surprise. Thought that almost every fm-transmitter just could send the signal by air to the antenna of the car.

    Not sure what your post is a reply to but that is what they do

  • My Mac pro tower has an "ATI Radion hd 2600 XT" video card, and it stopped getting signal to my tv, are there common problems known? How can I troubleshoot this problem when the signal isn't reaching the screen?

    My Mac pro tower has an "ATI Radion hd 2600 XT" video card, and it stopped getting signal to my tv, are there common problems known? How can I troubleshoot this problem when the signal isn't reaching the screen?

    http://discussions.info.apple.com/thread.jspa?messageID=12248238&#12248238
    http://discussions.apple.com/thread.jspa?threadID=2649035&tstart=0

  • Why did Apple remove the "All Movie" category from the purchased movies menu?

    We have purchased over 200 moivies from itunes, and until the most recent software update we could always view all of our movies together on Apple TV.  When you choose purchased movies the "All Movies" category is no longer available, it's been replaced by "Shared Movies" which would include movies purchased by your family members.  Now the only way to play your purchased movies is to go to the different genres below, that is a problem because it's not easy to determine what genre the movies you want falls into....for example the Star Wars Movies series is divided in to two different categories, the same goes for all of our kids movies, they are in mutlipule categories which makes it hard to scroll throug multipule categories to find the movies you want.  This seems like such a small thing, but really does make Apple TV much more complicated and frustrating to use.  Please HELP Apple and bring the All Movies Category back! Thank you.

    Winston Churchill wrote:
    I don't use family sharing either, so I'm not sure of the implications. However, assuming this is something to do with family sharing (some doubt, I saw another thread where a poster had the menu missing and didn't use family sharing) it would appear that it is intentional for it to appear in one state but not in another, this tends to tell me it's received a good coat of thinking about.
    I sincerely doubt there's much thought gone into a retrograde user interface and experience

  • How to use the airport express to extend the range of an existing airport extreme wireless network?

    The instruction manual says nothing on the topic, so maybe it is not possible. The only reason I think it is possible is that two different Apple reps told my girlfriend it was possible. Now we have one, and no clue how to proceed.
    We have an Airport Extreme, but its range is maximum 30 feet. We would like to double that. What do we do with the Airport Express? (We cannot move the modem nor the Airport Extreme. What we are trying to do has nothing to do with speakers, iTunes, or printers.)
    thanks
    Paul

    Are both the Extreme and Express 802.11n models? If so, check out this AirPort Support article; if one or both are 802.11g models, check out this article instead.

  • Will the Airport Express work with the iPhone minus a PC/mac? If so how??

    I no longer have my mac mini but have a new PC. I also have a 2nd gen iphone with the 3.0 software. I just bought a airport express and thought I could, via bluetooth, use my iphone in leau of a computer to control my itunes thru the living room stereo system. In other words, use my iphone as both the itunes library and the controller for the living room setup. Can this work? Or do I have to still run it thru my PC? Someone with expierence with this please help!! My email address is [email protected] thanks, Bill.

    I just bought a airport express and thought I could, via bluetooth, use my iphone in leau of a computer to control my itunes thru the living room stereo system.
    No that is not possible. The iPhone connects to the AirPort Express (AX) via 802.11b/g not Bluetooth.
    In other words, use my iphone as both the itunes library and the controller for the living room setup. Can this work?
    No. There is no way to stream music wirelessly from the iPhone to the AX.
    Or do I have to still run it thru my PC?
    Yes

  • I just changed the channel on my Airport Extreme and now can't get the Airport Express to recognize the network.  What do?

    I changed the channel on Airport Extreme to get away from interference.  Now I can't get my airport express to recognize the network.  What do I do?

    I would suggest that you perform a "hard" reset on the AirPort Express Base Station (AX), and then, using the AirPort Utility, reconfigure it "join" or "extend" the AirPort Extreme as appropriate for your networking requirements.

  • I have installed Switch Exec 2.1, running LabVIEW 8.2 and none of the VI's appear on my functions palette

    See Subject Line.
    Thanks
    Chris
    One should welcome adversity as an opportunity to excel.

    Hello Chris,
    I see that you are trying to get Switch Executive working in LabVIEW 8.2. Here are a couple of things that you should check:
    1) Check in the C:\Program Files\National Instruments\LabVIEW 8.2\vi.lib\SwitchExecutive directory and make sure you have the nise.llb and niseCfg.llb
        a) If these .llb files are not there, check to see if Switch Executive has installed correctly. You can go into Measurement and Automation Explorer(MAX) to
    2) Have you activated your Switch Executive software?
    If you have already activated the software and do not see the files there, try repairing the software. Another thing you can try is uninstalling and then reinstalling the software. For the vis to appear in LabVIEW they need to install into that folder. If you find them somewhere else on your system, you can try copying them to that folder.
    Please give these suggestions a try. Keep us posted on how that works out for you.
    Regards,
      Sandra T.
    Applications Engineer | National Instruments

  • What is the best expression to name the planning flow on SAP?

    I am working on my graduating project in this topic: configuring the planning flow on SAP for the different types of industries.
    By planning flow, I am talking about S&OP -> Demand Management -> MRP. But what's the best way to refer to this flow?
    I already thought about:
    "industrial planning" but it's too general and not precise.
    "production planning" but it already refers to the PP module, which deals with other functions than what i am meaning.
    "logistic planning" but it refers mainly to the operational level (ressources, workshop management, scheduling) while my work stops at MRP (tactical level)
    Can you help me to find the best designation?

    OK, I got it now... You are going to love this!
    "Advanced Planner and Optimizer", or in short "APO".
    The abbreviation even has a website shortcut already www.sap.com/apo and there is a whole instant community already there waiting for you.
    What a bargain!  :-)
    Cheers,
    Julius

  • HT201402 What is the Content "other" category in the "about this mac" Storage information?

    I have 250 Gig MacBook Pro.  My Audio is 21G, Movie 33G Photo 13G, App 17G Backup 0G, Other 124G.  What is the content of "Other"

    Hi,
    Can anyone help me with this: (see attached picture)
    I suppose there is a (preference) file to reset in order to display correctly the storage information ?
    Thank you for your help.
    Stan.

  • Organizing your own videos into the TV Show Category on the ipod

    I have a bit of a complicated problem. I want to organize some of my own videos onto the ipod under the TV Show section, NOT in the movie section. I have purchased tv shows from itunes, so that section is on my ipod. I've tried a million things, but it won't work.
      Windows XP  

    right click, get info, option tab, then change the type.
    iPods- 4gb Balck Nano, 60gb Black 5g}{Black Moto Razr}{PSP}{iPod Radio Remote   Windows XP   <img src="http://i36.photobucket.com/albums/e13/superman5656/sm.jpg"align="right

Maybe you are looking for